]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
V4L/DVB (8807): Add DVB support for the Leadtek Winfast PxDVR3200 H
authorSteven Toth <stoth@hauppauge.com>
Tue, 12 Aug 2008 16:30:03 +0000 (13:30 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Sun, 12 Oct 2008 11:36:55 +0000 (09:36 -0200)
This patch is on behalf of Stephen Backway <stev391@email.com>, and
represents two patches I received (and some subsequent whitespace
cleanup I had due to how I pulled the patches).

From the original author:

a) Add DVB support for the Leadtek Winfast PxDVR3200 H.

b) The tuner callback previously checked the command 3 times:
1) To see if it was the XC2028_RESET_CLK
2) To see if it was not the XC2028_RESET_TUNER
3) To see if it was the XC2028_RESET_TUNER
This patch removes the third check.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Stephen Backway <stev391@email.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Documentation/video4linux/CARDLIST.cx23885
drivers/media/video/cx23885/Kconfig
drivers/media/video/cx23885/cx23885-cards.c
drivers/media/video/cx23885/cx23885-dvb.c
drivers/media/video/cx23885/cx23885.h

index bccafd3578531252dae9dae08449040b94f33afd..64823ccacd69013ae48401705e7704a39ce38136 100644 (file)
@@ -10,3 +10,4 @@
   9 -> Hauppauge WinTV-HVR1400                             [0070:8010]
  10 -> DViCO FusionHDTV7 Dual Express                      [18ac:d618]
  11 -> DViCO FusionHDTV DVB-T Dual Express                 [18ac:db78]
+ 12 -> Leadtek Winfast PxDVR3200 H                         [107d:6681]
index e60bd31b51a359cbc98857383cc76be0cfa0bc51..8c1b7fa47a41cc36f35d3f4c763ff65c190e792c 100644 (file)
@@ -15,6 +15,7 @@ config VIDEO_CX23885
        select DVB_S5H1409 if !DVB_FE_CUSTOMISE
        select DVB_S5H1411 if !DVB_FE_CUSTOMISE
        select DVB_LGDT330X if !DVB_FE_CUSTOMISE
+       select DVB_ZL10353 if !DVB_FE_CUSTOMISE
        select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMIZE
        select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE
        select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
index 0daffc3dbec0b0fb856b88be8347d057e49643cb..ccea8de7c7dc1a30d5337a67696fe36777dc1a82 100644 (file)
@@ -154,6 +154,10 @@ struct cx23885_board cx23885_boards[] = {
                .portb          = CX23885_MPEG_DVB,
                .portc          = CX23885_MPEG_DVB,
        },
+       [CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H] = {
+               .name           = "Leadtek Winfast PxDVR3200 H",
+               .portc          = CX23885_MPEG_DVB,
+       },
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
 
@@ -229,6 +233,10 @@ struct cx23885_subid cx23885_subids[] = {
                .subvendor = 0x18ac,
                .subdevice = 0xdb78,
                .card      = CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP,
+       }, {
+               .subvendor = 0x107d,
+               .subdevice = 0x6681,
+               .card      = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H,
        },
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -348,21 +356,18 @@ int cx23885_tuner_callback(void *priv, int command, int arg)
        case CX23885_BOARD_HAUPPAUGE_HVR1400:
        case CX23885_BOARD_HAUPPAUGE_HVR1500:
        case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
+       case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
                /* Tuner Reset Command */
-               if (command == 0)
-                       bitmask = 0x04;
+               bitmask = 0x04;
                break;
        case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
        case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
-               if (command == 0) {
-
-                       /* Two identical tuners on two different i2c buses,
-                        * we need to reset the correct gpio. */
-                       if (port->nr == 0)
-                               bitmask = 0x01;
-                       else if (port->nr == 1)
-                               bitmask = 0x04;
-               }
+               /* Two identical tuners on two different i2c buses,
+                * we need to reset the correct gpio. */
+               if (port->nr == 0)
+                       bitmask = 0x01;
+               else if (port->nr == 1)
+                       bitmask = 0x04;
                break;
        }
 
@@ -491,6 +496,19 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
                mdelay(20);
                cx_set(GP0_IO, 0x000f000f);
                break;
+       case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+               /* GPIO-2  xc3028 tuner reset */
+
+               /* The following GPIO's are on the internal AVCore (cx25840) */
+               /* GPIO-?  zl10353 demod reset */
+
+               /* Put the parts into reset and back */
+               cx_set(GP0_IO, 0x00040000);
+               mdelay(20);
+               cx_clear(GP0_IO, 0x00000004);
+               mdelay(20);
+               cx_set(GP0_IO, 0x00040004);
+               break;
        }
 }
 
@@ -578,6 +596,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
        case CX23885_BOARD_HAUPPAUGE_HVR1200:
        case CX23885_BOARD_HAUPPAUGE_HVR1700:
        case CX23885_BOARD_HAUPPAUGE_HVR1400:
+       case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
        default:
                ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
                ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
@@ -591,6 +610,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
        case CX23885_BOARD_HAUPPAUGE_HVR1800:
        case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
        case CX23885_BOARD_HAUPPAUGE_HVR1700:
+       case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
                request_module("cx25840");
                break;
        }
index f8564bb0d428a6922ac92707f3bb959d7dc7ec31..b85cb39b101da9b2528041a7bd4d0348bc7b8a54 100644 (file)
@@ -501,6 +501,32 @@ static int dvb_register(struct cx23885_tsport *port)
                }
                break;
        }
+       case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+               i2c_bus = &dev->i2c_bus[0];
+
+               port->dvb.frontend = dvb_attach(zl10353_attach,
+                       &dvico_fusionhdtv_xc3028,
+                       &i2c_bus->i2c_adap);
+               if (port->dvb.frontend != NULL) {
+                       struct dvb_frontend      *fe;
+                       struct xc2028_config      cfg = {
+                               .i2c_adap  = &dev->i2c_bus[1].i2c_adap,
+                               .i2c_addr  = 0x61,
+                               .video_dev = port,
+                               .callback  = cx23885_tuner_callback,
+                       };
+                       static struct xc2028_ctrl ctl = {
+                               .fname       = "xc3028-v27.fw",
+                               .max_len     = 64,
+                               .demod       = XC3028_FE_ZARLINK456,
+                       };
+
+                       fe = dvb_attach(xc2028_attach, port->dvb.frontend,
+                               &cfg);
+                       if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+                               fe->ops.tuner_ops.set_config(fe, &ctl);
+               }
+               break;
        default:
                printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
                       dev->name);
index db52d814a974a7582c773ccaaa1597fb5b69eb76..4e0fcb3f7fcbdcc93393fc2926e53aeade06faf9 100644 (file)
@@ -65,6 +65,7 @@
 #define CX23885_BOARD_HAUPPAUGE_HVR1400        9
 #define CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP 10
 #define CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP 11
+#define CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H 12
 
 /* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */
 #define CX23885_NORMS (\