]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[PATCH] emac: add support for platform-specific unsupported PHY features
authorWade Farnsworth <wfarnsworth@mvista.com>
Tue, 4 Oct 2005 02:21:33 +0000 (22:21 -0400)
committerJeff Garzik <jgarzik@pobox.com>
Tue, 4 Oct 2005 02:21:33 +0000 (22:21 -0400)
This patch adds support to the ibm_emac driver for platform-specific
unsupported PHY features.

The patch attempts to determine the highest speed and duplex when
autonegotiation is unsupported.

Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
drivers/net/ibm_emac/ibm_emac_core.c

index 0de3bb9061741bca16cf853d89941b27355354a9..14e9b6315f208feab806c2838eba5a6911a04852 100644 (file)
@@ -1875,6 +1875,9 @@ static int emac_init_device(struct ocp_device *ocpdev, struct ibm_ocp_mal *mal)
                rc = -ENODEV;
                goto bail;
        }
+       
+       /* Disable any PHY features not supported by the platform */
+       ep->phy_mii.def->features &= ~emacdata->phy_feat_exc;
 
        /* Setup initial PHY config & startup aneg */
        if (ep->phy_mii.def->ops->init)
@@ -1882,6 +1885,34 @@ static int emac_init_device(struct ocp_device *ocpdev, struct ibm_ocp_mal *mal)
        netif_carrier_off(ndev);
        if (ep->phy_mii.def->features & SUPPORTED_Autoneg)
                ep->want_autoneg = 1;
+       else {
+               ep->want_autoneg = 0;
+               
+               /* Select highest supported speed/duplex */
+               if (ep->phy_mii.def->features & SUPPORTED_1000baseT_Full) {
+                       ep->phy_mii.speed = SPEED_1000;
+                       ep->phy_mii.duplex = DUPLEX_FULL;
+               } else if (ep->phy_mii.def->features & 
+                          SUPPORTED_1000baseT_Half) {
+                       ep->phy_mii.speed = SPEED_1000;
+                       ep->phy_mii.duplex = DUPLEX_HALF;
+               } else if (ep->phy_mii.def->features & 
+                          SUPPORTED_100baseT_Full) {
+                       ep->phy_mii.speed = SPEED_100;
+                       ep->phy_mii.duplex = DUPLEX_FULL;
+               } else if (ep->phy_mii.def->features & 
+                          SUPPORTED_100baseT_Half) {
+                       ep->phy_mii.speed = SPEED_100;
+                       ep->phy_mii.duplex = DUPLEX_HALF;
+               } else if (ep->phy_mii.def->features & 
+                          SUPPORTED_10baseT_Full) {
+                       ep->phy_mii.speed = SPEED_10;
+                       ep->phy_mii.duplex = DUPLEX_FULL;
+               } else {
+                       ep->phy_mii.speed = SPEED_10;
+                       ep->phy_mii.duplex = DUPLEX_HALF;
+               }
+       }
        emac_start_link(ep, NULL);
 
        /* read the MAC Address */