if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io;
- pdev->conf.ConfigIndex = cfg->index;
pdev->io.BasePort1 = io->win[0].base;
pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
if (!(io->flags & CISTPL_IO_16BIT))
p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) &&
(cf->io.win[0].base != 0)) {
- p_dev->conf.ConfigIndex = cf->index;
p_dev->io.BasePort1 = cf->io.win[0].base;
p_dev->io.IOAddrLines = (try == 0) ? 16 :
cf->io.flags & CISTPL_IO_LINES_MASK;
int j;
if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
- p_dev->conf.ConfigIndex = cf->index;
for (j = 0; j < 5; j++) {
p_dev->io.BasePort1 = base[j];
p_dev->io.IOAddrLines = base[j] ? 16 : 3;
p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) &&
(cf->io.win[0].base != 0)) {
- p_dev->conf.ConfigIndex = cf->index;
p_dev->io.BasePort1 = cf->io.win[0].base;
p_dev->io.IOAddrLines = (try == 0) ? 16 :
cf->io.flags & CISTPL_IO_LINES_MASK;
int j;
if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
- p_dev->conf.ConfigIndex = cf->index;
for (j = 0; j < 5; j++) {
p_dev->io.BasePort1 = base[j];
p_dev->io.IOAddrLines = base[j] ? 16 : 3;
void *priv_data)
{
if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
- p_dev->conf.ConfigIndex = cf->index;
p_dev->io.BasePort1 = cf->io.win[0].base;
p_dev->io.NumPorts1 = cf->io.win[0].len; /*yo */
p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
cistpl_cftable_entry_t *cfg,
void *priv_data)
{
- p_dev->conf.ConfigIndex = cfg->index;
-
if (!cfg->io.nwin)
return -ENODEV;
void *priv_data)
{
int rc;
- p_dev->conf.ConfigIndex = cfg->index;
-
if (!cfg->io.nwin)
return -ENODEV;
if (cf->io.nwin <= 0)
return -ENODEV;
- p_dev->conf.ConfigIndex = cf->index;
p_dev->io.BasePort1 = cf->io.win[0].base;
p_dev->io.NumPorts1 = cf->io.win[0].len;
p_dev->io.NumPorts2 = 0;
if (cf->io.nwin <= 0)
return -ENODEV;
- p_dev->conf.ConfigIndex = cf->index;
p_dev->io.BasePort1 = cf->io.win[0].base;
p_dev->io.NumPorts1 = cf->io.win[0].len;
p_dev->io.NumPorts2 = 0;
if ((cf->io.nwin > 0) && cf->io.win[0].base) {
printk(KERN_INFO "(elsa_cs: looks like the 96 model)\n");
- p_dev->conf.ConfigIndex = cf->index;
p_dev->io.BasePort1 = cf->io.win[0].base;
if (!pcmcia_request_io(p_dev, &p_dev->io))
return 0;
} else {
printk(KERN_INFO "(elsa_cs: looks like the 97 model)\n");
- p_dev->conf.ConfigIndex = cf->index;
for (j = 0x2f0; j > 0x100; j -= 0x10) {
p_dev->io.BasePort1 = j;
if (!pcmcia_request_io(p_dev, &p_dev->io))
cfg_mem->dflt = *cfg;
if (cfg->index == 0)
return -ENODEV;
- p_dev->conf.ConfigIndex = cfg->index;
/* Does this card need audio output? */
if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
if ((cf->io.nwin > 0) && cf->io.win[0].base) {
printk(KERN_INFO "(teles_cs: looks like the 96 model)\n");
- p_dev->conf.ConfigIndex = cf->index;
p_dev->io.BasePort1 = cf->io.win[0].base;
if (!pcmcia_request_io(p_dev, &p_dev->io))
return 0;
} else {
printk(KERN_INFO "(teles_cs: looks like the 97 model)\n");
- p_dev->conf.ConfigIndex = cf->index;
for (j = 0x2f0; j > 0x100; j -= 0x10) {
p_dev->io.BasePort1 = j;
if (!pcmcia_request_io(p_dev, &p_dev->io))
if (cfg->index == 0 || cfg->io.nwin == 0)
return -EINVAL;
- p_dev->conf.ConfigIndex = cfg->index;
-
/* For multifunction cards, by convention, we configure the
network function with window 0, and serial with window 1 */
if (io->nwin > 1) {
void *priv_data)
{
int k;
- p_dev->conf.ConfigIndex = cf->index;
p_dev->io.BasePort2 = cf->io.win[0].base;
for (k = 0; k < 0x400; k += 0x10) {
if (k & 0x80)
cistpl_cftable_entry_t *cf,
void *priv_data)
{
- p_dev->conf.ConfigIndex = cf->index;
p_dev->io.BasePort1 = cf->io.win[0].base;
p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
return pcmcia_request_io(p_dev, &p_dev->io);
if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
- p_dev->conf.ConfigIndex = cf->index ;
p_dev->io.BasePort2 = cf->io.win[0].base;
p_dev->io.BasePort1 = ioaddr;
if (!pcmcia_request_io(p_dev, &p_dev->io))
int *pass = priv_data;
if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
- p_dev->conf.ConfigIndex = cf->index ;
p_dev->io.BasePort2 = cf->io.win[0].base;
p_dev->io.BasePort1 = p_dev->io.BasePort2
+ (*pass ? (cf->index & 0x20 ? -24:8)
if (cfg->index == 0)
return -ENODEV;
- p_dev->conf.ConfigIndex = cfg->index;
-
/* Does this card need audio output? */
if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
*dflt = *cfg;
if (cfg->index == 0)
return -ENODEV;
- p_dev->conf.ConfigIndex = cfg->index;
-
/* Does this card need audio output? */
if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
if (cfg->index == 0)
return -ENODEV;
- p_dev->conf.ConfigIndex = cfg->index;
PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
"(default 0x%02X)\n", cfg->index, cfg_mem->dflt.index);
cfg_mem->dflt = *cfg;
if (cfg->index == 0)
goto next_entry;
- p_dev->conf.ConfigIndex = cfg->index;
/* Use power settings for Vcc and Vpp if present */
/* Note that the CIS values need to be rescaled */
cfg_mem->dflt = *cfg;
if (cfg->index == 0)
goto next_entry;
- p_dev->conf.ConfigIndex = cfg->index;
/* Use power settings for Vcc and Vpp if present */
/* Note that the CIS values need to be rescaled */
cistpl_cftable_entry_t *dflt = priv_data;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->conf.ConfigIndex = cfg->index;
if (epp_mode)
p_dev->conf.ConfigIndex |= FORCE_EPP_MODE;
p_dev->io.BasePort1 = io->win[0].base;
ret = pcmcia_get_first_tuple(p_dev, tuple);
while (!ret) {
+ cistpl_cftable_entry_t *cfg = &cfg_mem->parse.cftable_entry;
+
if (pcmcia_get_tuple_data(p_dev, tuple))
goto next_entry;
if (pcmcia_parse_tuple(p_dev, tuple, &cfg_mem->parse))
goto next_entry;
- ret = conf_check(p_dev, &cfg_mem->parse.cftable_entry,
- priv_data);
+ /* default values */
+ p_dev->conf.ConfigIndex = cfg->index;
+
+ ret = conf_check(p_dev, cfg, priv_data);
if (!ret)
break;
p_dev->io.BasePort1 = cfg->io.win[1].base;
if ((cfg->io.nwin > 0) &&
(p_dev->io.BasePort1 < 0xffff)) {
- p_dev->conf.ConfigIndex = cfg->index;
if (!pcmcia_request_io(p_dev, &p_dev->io))
return 0;
}
cistpl_cftable_entry_t *cfg,
void *priv_data)
{
- p_dev->conf.ConfigIndex = cfg->index;
p_dev->io.BasePort1 = cfg->io.win[0].base;
return pcmcia_request_io(p_dev, &p_dev->io);
}
if (cfg->index == 0)
return -ENODEV;
- p_dev->conf.ConfigIndex = cfg->index;
-
/* Does this card need audio output? */
if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
cistpl_cftable_entry_t *cfg,
void *priv_data)
{
- p_dev->conf.ConfigIndex = cfg->index;
p_dev->io.BasePort1 = cfg->io.win[0].base;
p_dev->io.NumPorts1 = cfg->io.win[0].len;
cistpl_cftable_entry_t *cfg,
void *priv_data)
{
- p_dev->conf.ConfigIndex = cfg->index;
p_dev->io.BasePort1 = cfg->io.win[0].base;
p_dev->io.NumPorts1 = cfg->io.win[0].len;
if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)])
&& (cf->io.win[0].base != 0)) {
- p_dev->conf.ConfigIndex = cf->index;
p_dev->io.BasePort1 = cf->io.win[0].base;
p_dev->io.IOAddrLines = ((*try & 0x1) == 0) ?
16 : cf->io.flags & CISTPL_IO_LINES_MASK;
int j;
if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
- p_dev->conf.ConfigIndex = cf->index;
for (j = 0; j < 5; j++) {
p_dev->io.BasePort1 = base[j];
p_dev->io.IOAddrLines = base[j] ? 16 : 3;
/* The quad port cards have bad CIS's, so just look for a
window larger than 8 ports and assume it will be right */
if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
- p_dev->conf.ConfigIndex = cf->index;
p_dev->io.BasePort1 = cf->io.win[0].base;
p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
if (!pcmcia_request_io(p_dev, &p_dev->io)) {
int *base2 = priv_data;
if (cf->io.nwin == 2) {
- p_dev->conf.ConfigIndex = cf->index;
p_dev->io.BasePort1 = cf->io.win[0].base;
p_dev->io.BasePort2 = cf->io.win[1].base;
p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->conf.ConfigIndex = cfg->index;
p_dev->io.BasePort1 = io->win[0].base;
p_dev->io.NumPorts1 = io->win[0].len;
if (io->nwin == 2) {
if (cfg->index == 0)
return -ENODEV;
- p_dev->conf.ConfigIndex = cfg->index;
-
/* Use power settings for Vcc and Vpp if present */
/* Note that the CIS values need to be rescaled */
if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {