]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
bnx2x: Add PCIE EEH support
authorWendy Xiong <wendyx@us.ibm.com>
Tue, 24 Jun 2008 03:36:22 +0000 (20:36 -0700)
committerDavid S. Miller <davem@davemloft.net>
Tue, 24 Jun 2008 03:36:22 +0000 (20:36 -0700)
Add PCI recovery functions to the driver.  The initial PCI state is
also saved so the MSI state can be restored during PCI recovery.

Signed-off-by: Wendy Xiong <wendyx@us.ibm.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/bnx2x_main.c

index e9037131a04eebc88620f1cdd72a279e71253113..d21dc89d1e7730c4b79cc92cfa726486540cf302 100644 (file)
@@ -10181,13 +10181,102 @@ static int bnx2x_resume(struct pci_dev *pdev)
        return rc;
 }
 
+/**
+ * bnx2x_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t bnx2x_io_error_detected(struct pci_dev *pdev,
+                                               pci_channel_state_t state)
+{
+       struct net_device *dev = pci_get_drvdata(pdev);
+       struct bnx2x *bp = netdev_priv(dev);
+
+       rtnl_lock();
+
+       netif_device_detach(dev);
+
+       if (netif_running(dev))
+               bnx2x_nic_unload(bp, UNLOAD_CLOSE);
+
+       pci_disable_device(pdev);
+
+       rtnl_unlock();
+
+       /* Request a slot reset */
+       return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * bnx2x_io_slot_reset - called after the PCI bus has been reset
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot.
+ */
+static pci_ers_result_t bnx2x_io_slot_reset(struct pci_dev *pdev)
+{
+       struct net_device *dev = pci_get_drvdata(pdev);
+       struct bnx2x *bp = netdev_priv(dev);
+
+       rtnl_lock();
+
+       if (pci_enable_device(pdev)) {
+               dev_err(&pdev->dev,
+                       "Cannot re-enable PCI device after reset\n");
+               rtnl_unlock();
+               return PCI_ERS_RESULT_DISCONNECT;
+       }
+
+       pci_set_master(pdev);
+       pci_restore_state(pdev);
+
+       if (netif_running(dev))
+               bnx2x_set_power_state(bp, PCI_D0);
+
+       rtnl_unlock();
+
+       return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * bnx2x_io_resume - called when traffic can start flowing again
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation.
+ */
+static void bnx2x_io_resume(struct pci_dev *pdev)
+{
+       struct net_device *dev = pci_get_drvdata(pdev);
+       struct bnx2x *bp = netdev_priv(dev);
+
+       rtnl_lock();
+
+       if (netif_running(dev))
+               bnx2x_nic_load(bp, LOAD_OPEN);
+
+       netif_device_attach(dev);
+
+       rtnl_unlock();
+}
+
+static struct pci_error_handlers bnx2x_err_handler = {
+       .error_detected = bnx2x_io_error_detected,
+       .slot_reset = bnx2x_io_slot_reset,
+       .resume = bnx2x_io_resume,
+};
+
 static struct pci_driver bnx2x_pci_driver = {
-       .name       = DRV_MODULE_NAME,
-       .id_table   = bnx2x_pci_tbl,
-       .probe      = bnx2x_init_one,
-       .remove     = __devexit_p(bnx2x_remove_one),
-       .suspend    = bnx2x_suspend,
-       .resume     = bnx2x_resume,
+       .name        = DRV_MODULE_NAME,
+       .id_table    = bnx2x_pci_tbl,
+       .probe       = bnx2x_init_one,
+       .remove      = __devexit_p(bnx2x_remove_one),
+       .suspend     = bnx2x_suspend,
+       .resume      = bnx2x_resume,
+       .err_handler = &bnx2x_err_handler,
 };
 
 static int __init bnx2x_init(void)