]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
ieee1394: ohci1394: add PPC_PMAC platform code to driver probe
authorStefan Richter <stefanr@s5r6.in-berlin.de>
Fri, 10 Nov 2006 23:22:35 +0000 (00:22 +0100)
committerStefan Richter <stefanr@s5r6.in-berlin.de>
Thu, 7 Dec 2006 22:04:14 +0000 (23:04 +0100)
Fixes http://bugzilla.kernel.org/show_bug.cgi?id=7431
iBook G3 threw a machine check exception and put the display backlight
to full brightness after ohci1394 was unloaded and reloaded.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
drivers/ieee1394/ohci1394.c

index b8e922b65e2e645e36b2ac734978606c70027068..453d0be694e43243eae96c1ed7c4b045551baec2 100644 (file)
@@ -3215,6 +3215,19 @@ static int __devinit ohci1394_pci_probe(struct pci_dev *dev,
        struct ti_ohci *ohci;   /* shortcut to currently handled device */
        resource_size_t ohci_base;
 
+#ifdef CONFIG_PPC_PMAC
+       /* Necessary on some machines if ohci1394 was loaded/ unloaded before */
+       if (machine_is(powermac)) {
+               struct device_node *of_node = pci_device_to_OF_node(dev);
+
+               if (of_node) {
+                       pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, of_node,
+                                         0, 1);
+                       pmac_call_feature(PMAC_FTR_1394_ENABLE, of_node, 0, 1);
+               }
+       }
+#endif /* CONFIG_PPC_PMAC */
+
         if (pci_enable_device(dev))
                FAIL(-ENXIO, "Failed to enable OHCI hardware");
         pci_set_master(dev);
@@ -3503,10 +3516,8 @@ static void ohci1394_pci_remove(struct pci_dev *pdev)
 #endif
 
 #ifdef CONFIG_PPC_PMAC
-       /* On UniNorth, power down the cable and turn off the chip
-        * clock when the module is removed to save power on
-        * laptops. Turning it back ON is done by the arch code when
-        * pci_enable_device() is called */
+       /* On UniNorth, power down the cable and turn off the chip clock
+        * to save power on laptops */
        {
                struct device_node* of_node;