};
#endif /* CONFIG_ZORRO */
-struct cirrusfb_regs {
- int multiplexing;
-};
-
#ifdef CIRRUSFB_DEBUG
enum cirrusfb_dbg_reg_class {
CRT,
enum cirrus_board btype;
unsigned char SFR; /* Shadow of special function register */
- struct cirrusfb_regs currentmode;
+ int multiplexing;
int blank_mode;
u32 pseudo_palette[16];
/**** BEGIN PROTOTYPES ******************************************************/
/*--- Interface used by the world ------------------------------------------*/
-static int cirrusfb_init(void);
-#ifndef MODULE
-static int cirrusfb_setup(char *options);
-#endif
-
-static int cirrusfb_open(struct fb_info *info, int user);
-static int cirrusfb_release(struct fb_info *info, int user);
-static int cirrusfb_setcolreg(unsigned regno, unsigned red, unsigned green,
- unsigned blue, unsigned transp,
- struct fb_info *info);
-static int cirrusfb_check_var(struct fb_var_screeninfo *var,
- struct fb_info *info);
-static int cirrusfb_set_par(struct fb_info *info);
static int cirrusfb_pan_display(struct fb_var_screeninfo *var,
struct fb_info *info);
-static int cirrusfb_blank(int blank_mode, struct fb_info *info);
-static void cirrusfb_fillrect(struct fb_info *info,
- const struct fb_fillrect *region);
-static void cirrusfb_copyarea(struct fb_info *info,
- const struct fb_copyarea *area);
-static void cirrusfb_imageblit(struct fb_info *info,
- const struct fb_image *image);
-
-/* function table of the above functions */
-static struct fb_ops cirrusfb_ops = {
- .owner = THIS_MODULE,
- .fb_open = cirrusfb_open,
- .fb_release = cirrusfb_release,
- .fb_setcolreg = cirrusfb_setcolreg,
- .fb_check_var = cirrusfb_check_var,
- .fb_set_par = cirrusfb_set_par,
- .fb_pan_display = cirrusfb_pan_display,
- .fb_blank = cirrusfb_blank,
- .fb_fillrect = cirrusfb_fillrect,
- .fb_copyarea = cirrusfb_copyarea,
- .fb_imageblit = cirrusfb_imageblit,
-};
/*--- Internal routines ----------------------------------------------------*/
static void init_vgachip(struct fb_info *info);
}
static int cirrusfb_decode_var(const struct fb_var_screeninfo *var,
- struct cirrusfb_regs *regs,
struct fb_info *info)
{
long freq;
dev_dbg(info->device, "desired pixclock: %ld kHz\n", freq);
maxclock = cirrusfb_board_info[cinfo->btype].maxclock[maxclockidx];
- regs->multiplexing = 0;
+ cinfo->multiplexing = 0;
/* If the frequency is greater than we can support, we might be able
* to use multiplexing for the video mode */
switch (cinfo->btype) {
case BT_ALPINE:
case BT_GD5480:
- regs->multiplexing = 1;
+ cinfo->multiplexing = 1;
break;
default:
{
struct cirrusfb_info *cinfo = info->par;
struct fb_var_screeninfo *var = &info->var;
- struct cirrusfb_regs regs;
u8 __iomem *regbase = cinfo->regbase;
unsigned char tmp;
int err;
init_vgachip(info);
- err = cirrusfb_decode_var(var, ®s, info);
+ err = cirrusfb_decode_var(var, info);
if (err) {
/* should never happen */
dev_dbg(info->device, "mode change aborted. invalid var.\n");
vsyncend /= 2;
vdispend /= 2;
}
- if (regs.multiplexing) {
+ if (cinfo->multiplexing) {
htotal /= 2;
hsyncstart /= 2;
hsyncend /= 2;
case BT_ALPINE:
case BT_GD5480:
vga_wseq(regbase, CL_SEQR7,
- regs.multiplexing ?
+ cinfo->multiplexing ?
bi->sr07_1bpp_mux : bi->sr07_1bpp);
break;
/* pixel mask: pass-through for first plane */
WGen(cinfo, VGA_PEL_MSK, 0x01);
- if (regs.multiplexing)
+ if (cinfo->multiplexing)
/* hidden dac reg: 1280x1024 */
WHDR(cinfo, 0x4a);
else
case BT_ALPINE:
case BT_GD5480:
vga_wseq(regbase, CL_SEQR7,
- regs.multiplexing ?
+ cinfo->multiplexing ?
bi->sr07_8bpp_mux : bi->sr07_8bpp);
break;
/* mode register: 256 color mode */
vga_wgfx(regbase, VGA_GFX_MODE, 64);
- /* pixel mask: pass-through all planes */
- WGen(cinfo, VGA_PEL_MSK, 0xff);
- if (regs.multiplexing)
+ if (cinfo->multiplexing)
/* hidden dac reg: 1280x1024 */
WHDR(cinfo, 0x4a);
else
/* hidden dac: nothing */
WHDR(cinfo, 0);
- /* memory mode: chain4, ext. memory */
- vga_wseq(regbase, VGA_SEQ_MEMORY_MODE, 0x0a);
- /* plane mask: enable writing to all 4 planes */
- vga_wseq(regbase, VGA_SEQ_PLANE_WRITE, 0xff);
}
/******************************************************
/* mode register: 256 color mode */
vga_wgfx(regbase, VGA_GFX_MODE, 64);
- /* pixel mask: pass-through all planes */
- WGen(cinfo, VGA_PEL_MSK, 0xff);
#ifdef CONFIG_PCI
WHDR(cinfo, 0xc1); /* Copy Xbh */
#elif defined(CONFIG_ZORRO)
/* FIXME: CONFIG_PCI and CONFIG_ZORRO may be defined both */
WHDR(cinfo, 0xa0); /* hidden dac reg: nothing special */
#endif
- /* memory mode: chain4, ext. memory */
- vga_wseq(regbase, VGA_SEQ_MEMORY_MODE, 0x0a);
- /* plane mask: enable writing to all 4 planes */
- vga_wseq(regbase, VGA_SEQ_PLANE_WRITE, 0xff);
}
/******************************************************
/* mode register: 256 color mode */
vga_wgfx(regbase, VGA_GFX_MODE, 64);
- /* pixel mask: pass-through all planes */
- WGen(cinfo, VGA_PEL_MSK, 0xff);
/* hidden dac reg: 8-8-8 mode (24 or 32) */
WHDR(cinfo, 0xc5);
- /* memory mode: chain4, ext. memory */
- vga_wseq(regbase, VGA_SEQ_MEMORY_MODE, 0x0a);
- /* plane mask: enable writing to all 4 planes */
- vga_wseq(regbase, VGA_SEQ_PLANE_WRITE, 0xff);
}
/******************************************************
}
- /* text cursor location high */
- vga_wcrt(regbase, VGA_CRTC_CURSOR_HI, 0);
- /* text cursor location low */
- vga_wcrt(regbase, VGA_CRTC_CURSOR_LO, 0);
- /* underline row scanline = at very bottom */
- vga_wcrt(regbase, VGA_CRTC_UNDERLINE, 0);
-
- /* controller mode */
- vga_wattr(regbase, VGA_ATC_MODE, 1);
- /* overscan (border) color */
- vga_wattr(regbase, VGA_ATC_OVERSCAN, 0);
- /* color plane enable */
- vga_wattr(regbase, VGA_ATC_PLANE_ENABLE, 15);
/* pixel panning */
vga_wattr(regbase, CL_AR33, 0);
- /* color select */
- vga_wattr(regbase, VGA_ATC_COLOR_PAGE, 0);
/* [ EGS: SetOffset(); ] */
/* From SetOffset(): Turn on VideoEnable bit in Attribute controller */
AttrOn(cinfo);
- /* set/reset register */
- vga_wgfx(regbase, VGA_GFX_SR_VALUE, 0);
- /* set/reset enable */
- vga_wgfx(regbase, VGA_GFX_SR_ENABLE, 0);
- /* color compare */
- vga_wgfx(regbase, VGA_GFX_COMPARE_VALUE, 0);
- /* data rotate */
- vga_wgfx(regbase, VGA_GFX_DATA_ROTATE, 0);
- /* read map select */
- vga_wgfx(regbase, VGA_GFX_PLANE_READ, 0);
- /* miscellaneous register */
- vga_wgfx(regbase, VGA_GFX_MISC, 1);
- /* color don't care */
- vga_wgfx(regbase, VGA_GFX_COMPARE_MASK, 15);
- /* bit mask */
- vga_wgfx(regbase, VGA_GFX_BIT_MASK, 255);
-
- /* graphics cursor attributes: nothing special */
- vga_wseq(regbase, CL_SEQR12, 0x0);
-
if (cinfo->btype == BT_LAGUNA) {
/* no tiles */
fb_writew(control | 0x1000, cinfo->laguna_mmio + 0x402);
vga_wseq(regbase, VGA_SEQ_CLOCK_MODE, tmp);
dev_dbg(info->device, "CL_SEQR1: %d\n", tmp);
- cinfo->currentmode = regs;
-
/* pan to requested offset */
cirrusfb_pan_display(var, info);
if (var->vmode & FB_VMODE_YWRAP)
return -EINVAL;
- info->var.xoffset = var->xoffset;
- info->var.yoffset = var->yoffset;
-
xoffset = var->xoffset * info->var.bits_per_pixel / 8;
yoffset = var->yoffset;
vga_wcrt(cinfo->regbase, CL_CRT1B, tmp);
/* construct bit 19 of screen start address */
- if (cirrusfb_board_info[cinfo->btype].scrn_start_bit19)
- vga_wcrt(cinfo->regbase, CL_CRT1D, (base >> 12) & 0x80);
+ if (cirrusfb_board_info[cinfo->btype].scrn_start_bit19) {
+ tmp = vga_rcrt(cinfo->regbase, CL_CRT1D) & ~0x80;
+ tmp |= (base >> 12) & 0x80;
+ vga_wcrt(cinfo->regbase, CL_CRT1D, tmp);
+ }
/* write pixel panning value to AR33; this does not quite work in 8bpp
*
vga_wseq(cinfo->regbase, VGA_SEQ_PLANE_WRITE, 0xff);
/* character map select: doesn't even matter in gx mode */
vga_wseq(cinfo->regbase, VGA_SEQ_CHARACTER_MAP, 0x00);
- /* memory mode: chain-4, no odd/even, ext. memory */
- vga_wseq(cinfo->regbase, VGA_SEQ_MEMORY_MODE, 0x0e);
+ /* memory mode: chain4, ext. memory */
+ vga_wseq(cinfo->regbase, VGA_SEQ_MEMORY_MODE, 0x0a);
/* controller-internal base address of video memory */
if (bi->init_sr07)
vga_wattr(cinfo->regbase, VGA_ATC_OVERSCAN, 0x00);
/* Color Plane enable: Enable all 4 planes */
vga_wattr(cinfo->regbase, VGA_ATC_PLANE_ENABLE, 0x0f);
-/* ### vga_wattr(cinfo->regbase, CL_AR33, 0x00); * Pixel Panning: - */
/* Color Select: - */
vga_wattr(cinfo->regbase, VGA_ATC_COLOR_PAGE, 0x00);
}
#endif /* CONFIG_ZORRO */
+/* function table of the above functions */
+static struct fb_ops cirrusfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_open = cirrusfb_open,
+ .fb_release = cirrusfb_release,
+ .fb_setcolreg = cirrusfb_setcolreg,
+ .fb_check_var = cirrusfb_check_var,
+ .fb_set_par = cirrusfb_set_par,
+ .fb_pan_display = cirrusfb_pan_display,
+ .fb_blank = cirrusfb_blank,
+ .fb_fillrect = cirrusfb_fillrect,
+ .fb_copyarea = cirrusfb_copyarea,
+ .fb_imageblit = cirrusfb_imageblit,
+};
+
static int __devinit cirrusfb_set_fbinfo(struct fb_info *info)
{
struct cirrusfb_info *cinfo = info->par;
{
struct cirrusfb_info *cinfo = info->par;
int err;
- enum cirrus_board btype;
-
- btype = cinfo->btype;
/* sanity checks */
- assert(btype != BT_NONE);
+ assert(cinfo->btype != BT_NONE);
/* set all the vital stuff */
cirrusfb_set_fbinfo(info);
info->var.activate = FB_ACTIVATE_NOW;
- err = cirrusfb_decode_var(&info->var, &cinfo->currentmode, info);
+ err = cirrusfb_decode_var(&info->var, info);
if (err < 0) {
/* should never happen */
dev_dbg(info->device,
{
struct cirrusfb_info *cinfo;
struct fb_info *info;
- enum cirrus_board btype;
unsigned long board_addr, board_size;
int ret;
}
cinfo = info->par;
- cinfo->btype = btype = (enum cirrus_board) ent->driver_data;
+ cinfo->btype = (enum cirrus_board) ent->driver_data;
dev_dbg(info->device,
" Found PCI device, base address 0 is 0x%Lx, btype set to %d\n",
- (unsigned long long)pdev->resource[0].start, btype);
+ (unsigned long long)pdev->resource[0].start, cinfo->btype);
dev_dbg(info->device, " base address 1 is 0x%Lx\n",
(unsigned long long)pdev->resource[1].start);
dev_dbg(info->device, "Board address: 0x%lx, register address: 0x%lx\n",
board_addr, info->fix.mmio_start);
- board_size = (btype == BT_GD5480) ?
+ board_size = (cinfo->btype == BT_GD5480) ?
32 * MB_ : cirrusfb_get_memsize(info, cinfo->regbase);
ret = pci_request_regions(pdev, "cirrusfb");
};
#endif /* CONFIG_ZORRO */
-static int __init cirrusfb_init(void)
-{
- int error = 0;
-
-#ifndef MODULE
- char *option = NULL;
-
- if (fb_get_options("cirrusfb", &option))
- return -ENODEV;
- cirrusfb_setup(option);
-#endif
-
-#ifdef CONFIG_ZORRO
- error |= zorro_register_driver(&cirrusfb_zorro_driver);
-#endif
-#ifdef CONFIG_PCI
- error |= pci_register_driver(&cirrusfb_pci_driver);
-#endif
- return error;
-}
-
#ifndef MODULE
static int __init cirrusfb_setup(char *options)
{
MODULE_DESCRIPTION("Accelerated FBDev driver for Cirrus Logic chips");
MODULE_LICENSE("GPL");
+static int __init cirrusfb_init(void)
+{
+ int error = 0;
+
+#ifndef MODULE
+ char *option = NULL;
+
+ if (fb_get_options("cirrusfb", &option))
+ return -ENODEV;
+ cirrusfb_setup(option);
+#endif
+
+#ifdef CONFIG_ZORRO
+ error |= zorro_register_driver(&cirrusfb_zorro_driver);
+#endif
+#ifdef CONFIG_PCI
+ error |= pci_register_driver(&cirrusfb_pci_driver);
+#endif
+ return error;
+}
+
static void __exit cirrusfb_exit(void)
{
#ifdef CONFIG_PCI
{
/* now busy-wait until we're done */
while (vga_rgfx(regbase, CL_GR31) & 0x08)
- /* do nothing */ ;
+ cpu_relax();
}
/*******************************************************************
projects / linux-2.6-omap-h63xx.git / commitdiff