Copy 64-bit definitions of various interface structures into place.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
PT_PTE
};
-/*
- * Page-directory addresses above 4GB do not fit into architectural %cr3.
- * When accessing %cr3, or equivalent field in vcpu_guest_context, guests
- * must use the following accessor macros to pack/unpack valid MFNs.
- *
- * Note that Xen is using the fact that the pagetable base is always
- * page-aligned, and putting the 12 MSB of the address into the 12 LSB
- * of cr3.
- */
-#define xen_pfn_to_cr3(pfn) (((unsigned)(pfn) << 12) | ((unsigned)(pfn) >> 20))
-#define xen_cr3_to_pfn(cr3) (((unsigned)(cr3) >> 12) | ((unsigned)(cr3) << 20))
-
void set_pte_mfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags);
/******************************************************************************
* arch-x86_32.h
*
- * Guest OS interface to x86 32-bit Xen.
+ * Guest OS interface to x86 Xen.
*
* Copyright (c) 2004, K A Fraser
*/
-#ifndef __XEN_PUBLIC_ARCH_X86_32_H__
-#define __XEN_PUBLIC_ARCH_X86_32_H__
+#ifndef __ASM_X86_XEN_INTERFACE_H
+#define __ASM_X86_XEN_INTERFACE_H
#ifdef __XEN__
#define __DEFINE_GUEST_HANDLE(name, type) \
DEFINE_GUEST_HANDLE(void);
#endif
+#ifndef HYPERVISOR_VIRT_START
+#define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START)
+#endif
+
+#ifndef machine_to_phys_mapping
+#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START)
+#endif
+
+/* Maximum number of virtual CPUs in multi-processor guests. */
+#define MAX_VIRT_CPUS 32
+
/*
* SEGMENT DESCRIPTOR TABLES
*/
#define FIRST_RESERVED_GDT_BYTE (FIRST_RESERVED_GDT_PAGE * 4096)
#define FIRST_RESERVED_GDT_ENTRY (FIRST_RESERVED_GDT_BYTE / 8)
-/*
- * These flat segments are in the Xen-private section of every GDT. Since these
- * are also present in the initial GDT, many OSes will be able to avoid
- * installing their own GDT.
- */
-#define FLAT_RING1_CS 0xe019 /* GDT index 259 */
-#define FLAT_RING1_DS 0xe021 /* GDT index 260 */
-#define FLAT_RING1_SS 0xe021 /* GDT index 260 */
-#define FLAT_RING3_CS 0xe02b /* GDT index 261 */
-#define FLAT_RING3_DS 0xe033 /* GDT index 262 */
-#define FLAT_RING3_SS 0xe033 /* GDT index 262 */
-
-#define FLAT_KERNEL_CS FLAT_RING1_CS
-#define FLAT_KERNEL_DS FLAT_RING1_DS
-#define FLAT_KERNEL_SS FLAT_RING1_SS
-#define FLAT_USER_CS FLAT_RING3_CS
-#define FLAT_USER_DS FLAT_RING3_DS
-#define FLAT_USER_SS FLAT_RING3_SS
-
-/* And the trap vector is... */
-#define TRAP_INSTR "int $0x82"
-
-/*
- * Virtual addresses beyond this are not modifiable by guest OSes. The
- * machine->physical mapping table starts at this address, read-only.
- */
-#ifdef CONFIG_X86_PAE
-#define __HYPERVISOR_VIRT_START 0xF5800000
-#else
-#define __HYPERVISOR_VIRT_START 0xFC000000
-#endif
-
-#ifndef HYPERVISOR_VIRT_START
-#define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START)
-#endif
-
-#ifndef machine_to_phys_mapping
-#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START)
-#endif
-
-/* Maximum number of virtual CPUs in multi-processor guests. */
-#define MAX_VIRT_CPUS 32
-
-#ifndef __ASSEMBLY__
-
/*
* Send an array of these to HYPERVISOR_set_trap_table()
+ * The privilege level specifies which modes may enter a trap via a software
+ * interrupt. On x86/64, since rings 1 and 2 are unavailable, we allocate
+ * privilege levels as follows:
+ * Level == 0: Noone may enter
+ * Level == 1: Kernel may enter
+ * Level == 2: Kernel may enter
+ * Level == 3: Everyone may enter
*/
#define TI_GET_DPL(_ti) ((_ti)->flags & 3)
#define TI_GET_IF(_ti) ((_ti)->flags & 4)
#define TI_SET_DPL(_ti, _dpl) ((_ti)->flags |= (_dpl))
#define TI_SET_IF(_ti, _if) ((_ti)->flags |= ((!!(_if))<<2))
+#ifndef __ASSEMBLY__
struct trap_info {
uint8_t vector; /* exception vector */
uint8_t flags; /* 0-3: privilege level; 4: clear event enable? */
};
DEFINE_GUEST_HANDLE_STRUCT(trap_info);
-struct cpu_user_regs {
- uint32_t ebx;
- uint32_t ecx;
- uint32_t edx;
- uint32_t esi;
- uint32_t edi;
- uint32_t ebp;
- uint32_t eax;
- uint16_t error_code; /* private */
- uint16_t entry_vector; /* private */
- uint32_t eip;
- uint16_t cs;
- uint8_t saved_upcall_mask;
- uint8_t _pad0;
- uint32_t eflags; /* eflags.IF == !saved_upcall_mask */
- uint32_t esp;
- uint16_t ss, _pad1;
- uint16_t es, _pad2;
- uint16_t ds, _pad3;
- uint16_t fs, _pad4;
- uint16_t gs, _pad5;
+struct arch_shared_info {
+ unsigned long max_pfn; /* max pfn that appears in table */
+ /* Frame containing list of mfns containing list of mfns containing p2m. */
+ unsigned long pfn_to_mfn_frame_list_list;
+ unsigned long nmi_reason;
};
-DEFINE_GUEST_HANDLE_STRUCT(cpu_user_regs);
+#endif /* !__ASSEMBLY__ */
-typedef uint64_t tsc_timestamp_t; /* RDTSC timestamp */
+#ifdef CONFIG_X86_32
+#include "interface_32.h"
+#else
+#include "interface_64.h"
+#endif
+#ifndef __ASSEMBLY__
/*
* The following is all CPU context. Note that the fpu_ctxt block is filled
* in by FXSAVE if the CPU has feature FXSR; otherwise FSAVE is used.
unsigned long ldt_base, ldt_ents; /* LDT (linear address, # ents) */
unsigned long gdt_frames[16], gdt_ents; /* GDT (machine frames, # ents) */
unsigned long kernel_ss, kernel_sp; /* Virtual TSS (only SS1/SP1) */
+ /* NB. User pagetable on x86/64 is placed in ctrlreg[1]. */
unsigned long ctrlreg[8]; /* CR0-CR7 (control registers) */
unsigned long debugreg[8]; /* DB0-DB7 (debug registers) */
+#ifdef __i386__
unsigned long event_callback_cs; /* CS:EIP of event callback */
unsigned long event_callback_eip;
unsigned long failsafe_callback_cs; /* CS:EIP of failsafe callback */
unsigned long failsafe_callback_eip;
+#else
+ unsigned long event_callback_eip;
+ unsigned long failsafe_callback_eip;
+ unsigned long syscall_callback_eip;
+#endif
unsigned long vm_assist; /* VMASST_TYPE_* bitmap */
+#ifdef __x86_64__
+ /* Segment base addresses. */
+ uint64_t fs_base;
+ uint64_t gs_base_kernel;
+ uint64_t gs_base_user;
+#endif
};
DEFINE_GUEST_HANDLE_STRUCT(vcpu_guest_context);
-
-struct arch_shared_info {
- unsigned long max_pfn; /* max pfn that appears in table */
- /* Frame containing list of mfns containing list of mfns containing p2m. */
- unsigned long pfn_to_mfn_frame_list_list;
- unsigned long nmi_reason;
-};
-
-struct arch_vcpu_info {
- unsigned long cr2;
- unsigned long pad[5]; /* sizeof(struct vcpu_info) == 64 */
-};
-
-struct xen_callback {
- unsigned long cs;
- unsigned long eip;
-};
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLY__ */
/*
* Prefix forces emulation of some non-trapping instructions.
#define XEN_CPUID XEN_EMULATE_PREFIX "cpuid"
#endif
-#endif
+#endif /* __ASM_X86_XEN_INTERFACE_H */
--- /dev/null
+/******************************************************************************
+ * arch-x86_32.h
+ *
+ * Guest OS interface to x86 32-bit Xen.
+ *
+ * Copyright (c) 2004, K A Fraser
+ */
+
+#ifndef __ASM_X86_XEN_INTERFACE_32_H
+#define __ASM_X86_XEN_INTERFACE_32_H
+
+
+/*
+ * These flat segments are in the Xen-private section of every GDT. Since these
+ * are also present in the initial GDT, many OSes will be able to avoid
+ * installing their own GDT.
+ */
+#define FLAT_RING1_CS 0xe019 /* GDT index 259 */
+#define FLAT_RING1_DS 0xe021 /* GDT index 260 */
+#define FLAT_RING1_SS 0xe021 /* GDT index 260 */
+#define FLAT_RING3_CS 0xe02b /* GDT index 261 */
+#define FLAT_RING3_DS 0xe033 /* GDT index 262 */
+#define FLAT_RING3_SS 0xe033 /* GDT index 262 */
+
+#define FLAT_KERNEL_CS FLAT_RING1_CS
+#define FLAT_KERNEL_DS FLAT_RING1_DS
+#define FLAT_KERNEL_SS FLAT_RING1_SS
+#define FLAT_USER_CS FLAT_RING3_CS
+#define FLAT_USER_DS FLAT_RING3_DS
+#define FLAT_USER_SS FLAT_RING3_SS
+
+/* And the trap vector is... */
+#define TRAP_INSTR "int $0x82"
+
+/*
+ * Virtual addresses beyond this are not modifiable by guest OSes. The
+ * machine->physical mapping table starts at this address, read-only.
+ */
+#define __HYPERVISOR_VIRT_START 0xF5800000
+
+#ifndef __ASSEMBLY__
+
+struct cpu_user_regs {
+ uint32_t ebx;
+ uint32_t ecx;
+ uint32_t edx;
+ uint32_t esi;
+ uint32_t edi;
+ uint32_t ebp;
+ uint32_t eax;
+ uint16_t error_code; /* private */
+ uint16_t entry_vector; /* private */
+ uint32_t eip;
+ uint16_t cs;
+ uint8_t saved_upcall_mask;
+ uint8_t _pad0;
+ uint32_t eflags; /* eflags.IF == !saved_upcall_mask */
+ uint32_t esp;
+ uint16_t ss, _pad1;
+ uint16_t es, _pad2;
+ uint16_t ds, _pad3;
+ uint16_t fs, _pad4;
+ uint16_t gs, _pad5;
+};
+DEFINE_GUEST_HANDLE_STRUCT(cpu_user_regs);
+
+typedef uint64_t tsc_timestamp_t; /* RDTSC timestamp */
+
+struct arch_vcpu_info {
+ unsigned long cr2;
+ unsigned long pad[5]; /* sizeof(struct vcpu_info) == 64 */
+};
+
+struct xen_callback {
+ unsigned long cs;
+ unsigned long eip;
+};
+typedef struct xen_callback xen_callback_t;
+
+#define XEN_CALLBACK(__cs, __eip) \
+ ((struct xen_callback){ .cs = (__cs), .eip = (unsigned long)(__eip) })
+#endif /* !__ASSEMBLY__ */
+
+
+/*
+ * Page-directory addresses above 4GB do not fit into architectural %cr3.
+ * When accessing %cr3, or equivalent field in vcpu_guest_context, guests
+ * must use the following accessor macros to pack/unpack valid MFNs.
+ *
+ * Note that Xen is using the fact that the pagetable base is always
+ * page-aligned, and putting the 12 MSB of the address into the 12 LSB
+ * of cr3.
+ */
+#define xen_pfn_to_cr3(pfn) (((unsigned)(pfn) << 12) | ((unsigned)(pfn) >> 20))
+#define xen_cr3_to_pfn(cr3) (((unsigned)(cr3) >> 12) | ((unsigned)(cr3) << 20))
+
+#endif /* __ASM_X86_XEN_INTERFACE_32_H */
--- /dev/null
+#ifndef __ASM_X86_XEN_INTERFACE_64_H
+#define __ASM_X86_XEN_INTERFACE_64_H
+
+/*
+ * 64-bit segment selectors
+ * These flat segments are in the Xen-private section of every GDT. Since these
+ * are also present in the initial GDT, many OSes will be able to avoid
+ * installing their own GDT.
+ */
+
+#define FLAT_RING3_CS32 0xe023 /* GDT index 260 */
+#define FLAT_RING3_CS64 0xe033 /* GDT index 261 */
+#define FLAT_RING3_DS32 0xe02b /* GDT index 262 */
+#define FLAT_RING3_DS64 0x0000 /* NULL selector */
+#define FLAT_RING3_SS32 0xe02b /* GDT index 262 */
+#define FLAT_RING3_SS64 0xe02b /* GDT index 262 */
+
+#define FLAT_KERNEL_DS64 FLAT_RING3_DS64
+#define FLAT_KERNEL_DS32 FLAT_RING3_DS32
+#define FLAT_KERNEL_DS FLAT_KERNEL_DS64
+#define FLAT_KERNEL_CS64 FLAT_RING3_CS64
+#define FLAT_KERNEL_CS32 FLAT_RING3_CS32
+#define FLAT_KERNEL_CS FLAT_KERNEL_CS64
+#define FLAT_KERNEL_SS64 FLAT_RING3_SS64
+#define FLAT_KERNEL_SS32 FLAT_RING3_SS32
+#define FLAT_KERNEL_SS FLAT_KERNEL_SS64
+
+#define FLAT_USER_DS64 FLAT_RING3_DS64
+#define FLAT_USER_DS32 FLAT_RING3_DS32
+#define FLAT_USER_DS FLAT_USER_DS64
+#define FLAT_USER_CS64 FLAT_RING3_CS64
+#define FLAT_USER_CS32 FLAT_RING3_CS32
+#define FLAT_USER_CS FLAT_USER_CS64
+#define FLAT_USER_SS64 FLAT_RING3_SS64
+#define FLAT_USER_SS32 FLAT_RING3_SS32
+#define FLAT_USER_SS FLAT_USER_SS64
+
+#define __HYPERVISOR_VIRT_START 0xFFFF800000000000
+#define __HYPERVISOR_VIRT_END 0xFFFF880000000000
+#define __MACH2PHYS_VIRT_START 0xFFFF800000000000
+#define __MACH2PHYS_VIRT_END 0xFFFF804000000000
+
+#ifndef HYPERVISOR_VIRT_START
+#define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START)
+#define HYPERVISOR_VIRT_END mk_unsigned_long(__HYPERVISOR_VIRT_END)
+#endif
+
+#define MACH2PHYS_VIRT_START mk_unsigned_long(__MACH2PHYS_VIRT_START)
+#define MACH2PHYS_VIRT_END mk_unsigned_long(__MACH2PHYS_VIRT_END)
+#define MACH2PHYS_NR_ENTRIES ((MACH2PHYS_VIRT_END-MACH2PHYS_VIRT_START)>>3)
+#ifndef machine_to_phys_mapping
+#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START)
+#endif
+
+/*
+ * int HYPERVISOR_set_segment_base(unsigned int which, unsigned long base)
+ * @which == SEGBASE_* ; @base == 64-bit base address
+ * Returns 0 on success.
+ */
+#define SEGBASE_FS 0
+#define SEGBASE_GS_USER 1
+#define SEGBASE_GS_KERNEL 2
+#define SEGBASE_GS_USER_SEL 3 /* Set user %gs specified in base[15:0] */
+
+/*
+ * int HYPERVISOR_iret(void)
+ * All arguments are on the kernel stack, in the following format.
+ * Never returns if successful. Current kernel context is lost.
+ * The saved CS is mapped as follows:
+ * RING0 -> RING3 kernel mode.
+ * RING1 -> RING3 kernel mode.
+ * RING2 -> RING3 kernel mode.
+ * RING3 -> RING3 user mode.
+ * However RING0 indicates that the guest kernel should return to iteself
+ * directly with
+ * orb $3,1*8(%rsp)
+ * iretq
+ * If flags contains VGCF_in_syscall:
+ * Restore RAX, RIP, RFLAGS, RSP.
+ * Discard R11, RCX, CS, SS.
+ * Otherwise:
+ * Restore RAX, R11, RCX, CS:RIP, RFLAGS, SS:RSP.
+ * All other registers are saved on hypercall entry and restored to user.
+ */
+/* Guest exited in SYSCALL context? Return to guest with SYSRET? */
+#define _VGCF_in_syscall 8
+#define VGCF_in_syscall (1<<_VGCF_in_syscall)
+#define VGCF_IN_SYSCALL VGCF_in_syscall
+
+#ifndef __ASSEMBLY__
+
+struct iret_context {
+ /* Top of stack (%rsp at point of hypercall). */
+ uint64_t rax, r11, rcx, flags, rip, cs, rflags, rsp, ss;
+ /* Bottom of iret stack frame. */
+};
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+/* Anonymous union includes both 32- and 64-bit names (e.g., eax/rax). */
+#define __DECL_REG(name) union { \
+ uint64_t r ## name, e ## name; \
+ uint32_t _e ## name; \
+}
+#else
+/* Non-gcc sources must always use the proper 64-bit name (e.g., rax). */
+#define __DECL_REG(name) uint64_t r ## name
+#endif
+
+struct cpu_user_regs {
+ uint64_t r15;
+ uint64_t r14;
+ uint64_t r13;
+ uint64_t r12;
+ __DECL_REG(bp);
+ __DECL_REG(bx);
+ uint64_t r11;
+ uint64_t r10;
+ uint64_t r9;
+ uint64_t r8;
+ __DECL_REG(ax);
+ __DECL_REG(cx);
+ __DECL_REG(dx);
+ __DECL_REG(si);
+ __DECL_REG(di);
+ uint32_t error_code; /* private */
+ uint32_t entry_vector; /* private */
+ __DECL_REG(ip);
+ uint16_t cs, _pad0[1];
+ uint8_t saved_upcall_mask;
+ uint8_t _pad1[3];
+ __DECL_REG(flags); /* rflags.IF == !saved_upcall_mask */
+ __DECL_REG(sp);
+ uint16_t ss, _pad2[3];
+ uint16_t es, _pad3[3];
+ uint16_t ds, _pad4[3];
+ uint16_t fs, _pad5[3]; /* Non-zero => takes precedence over fs_base. */
+ uint16_t gs, _pad6[3]; /* Non-zero => takes precedence over gs_base_usr. */
+};
+DEFINE_GUEST_HANDLE_STRUCT(cpu_user_regs);
+
+#undef __DECL_REG
+
+#define xen_pfn_to_cr3(pfn) ((unsigned long)(pfn) << 12)
+#define xen_cr3_to_pfn(cr3) ((unsigned long)(cr3) >> 12)
+
+struct arch_vcpu_info {
+ unsigned long cr2;
+ unsigned long pad; /* sizeof(vcpu_info_t) == 64 */
+};
+
+typedef unsigned long xen_callback_t;
+
+#define XEN_CALLBACK(__cs, __rip) \
+ ((unsigned long)(__rip))
+
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* __ASM_X86_XEN_INTERFACE_64_H */
*/
#define CALLBACKOP_register 0
struct callback_register {
- uint16_t type;
- uint16_t flags;
- struct xen_callback address;
+ uint16_t type;
+ uint16_t flags;
+ xen_callback_t address;
};
/*
projects / linux-2.6-omap-h63xx.git / commitdiff