cirrusfb: do not change MCLK for Alpine chips

A memory clock value (MCLK) is changed to a minimum required by a current
mode bandwidth.  This usually lowers the MCLK to its minimum (50 MHz) thus
decreasing the card performance.  Just leave the MCLK value set by card
BIOS.

The CL-GD5446 Technical Reference Manual point 9.9.1.3 states that if a
pixclock value is close (~1%) to the MCLK or MCLK/2 this may result in a
jitter on the screen.  A countermeasure is to use the MCLK as pixclock
source instead of a VCLK.  The patch implements this as well.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c
index 9e0a1c58fde4425b6c8650b66d1b8ed1c0c846c0..048b139f0e50ce67eaa85d8d228f74fd40a72038 100644 (file)
--- a/drivers/video/cirrusfb.c
+++ b/drivers/video/cirrusfb.c
@@ -327,9 +327,7 @@ static const struct {
 #endif /* CONFIG_ZORRO */
 
 struct cirrusfb_regs {
-       long multiplexing;
-       long mclk;
-       long divMCLK;
+       int multiplexing;
 };
 
 #ifdef CIRRUSFB_DEBUG
@@ -461,45 +459,28 @@ static int cirrusfb_release(struct fb_info *info, int user)
 /****************************************************************************/
 /**** BEGIN Hardware specific Routines **************************************/
 
-/* Get a good MCLK value */
-static long cirrusfb_get_mclk(long freq, int bpp, long *div)
+/* Check if the MCLK is not a better clock source */
+static int cirrusfb_check_mclk(struct cirrusfb_info *cinfo, long freq)
 {
-       long mclk;
+       long mclk = vga_rseq(cinfo->regbase, CL_SEQR1F) & 0x3f;
 
-       assert(div != NULL);
-
-       /* Calculate MCLK, in case VCLK is high enough to require > 50MHz.
-        * Assume a 64-bit data path for now.  The formula is:
-        * ((B * PCLK * 2)/W) * 1.2
-        * B = bytes per pixel, PCLK = pixclock, W = data width in bytes */
-       mclk = ((bpp / 8) * freq * 2) / 4;
-       mclk = (mclk * 12) / 10;
-       if (mclk < 50000)
-               mclk = 50000;
-       DPRINTK("Use MCLK of %ld kHz\n", mclk);
-
-       /* Calculate value for SR1F.  Multiply by 2 so we can round up. */
-       mclk = ((mclk * 16) / 14318);
-       mclk = (mclk + 1) / 2;
-       DPRINTK("Set SR1F[5:0] to 0x%lx\n", mclk);
+       /* Read MCLK value */
+       mclk = (14318 * mclk) >> 3;
+       DPRINTK("Read MCLK of %ld kHz\n", mclk);
 
        /* Determine if we should use MCLK instead of VCLK, and if so, what we
-          * should divide it by to get VCLK */
-       switch (freq) {
-       case 24751 ... 25249:
-               *div = 2;
-               DPRINTK("Using VCLK = MCLK/2\n");
-               break;
-       case 49501 ... 50499:
-               *div = 1;
+        * should divide it by to get VCLK
+        */
+
+       if (abs(freq - mclk) < 250) {
                DPRINTK("Using VCLK = MCLK\n");
-               break;
-       default:
-               *div = 0;
-               break;
+               return 1;
+       } else if (abs(freq - (mclk / 2)) < 250) {
+               DPRINTK("Using VCLK = MCLK/2\n");
+               return 2;
        }
 
-       return mclk;
+       return 0;
 }
 
 static int cirrusfb_check_var(struct fb_var_screeninfo *var,
@@ -705,30 +686,27 @@ static int cirrusfb_decode_var(const struct fb_var_screeninfo *var,
                break;
        }
 #endif
-       regs->mclk = cirrusfb_get_mclk(freq, var->bits_per_pixel,
-                                       &regs->divMCLK);
-
        return 0;
 }
 
-static void cirrusfb_set_mclk(const struct cirrusfb_info *cinfo, int val,
-                               int div)
+static void cirrusfb_set_mclk_as_source(const struct cirrusfb_info *cinfo,
+                                       int div)
 {
+       unsigned char old1f, old1e;
        assert(cinfo != NULL);
+       old1f = vga_rseq(cinfo->regbase, CL_SEQR1F) & ~0x40;
 
-       if (div == 2) {
-               /* VCLK = MCLK/2 */
-               unsigned char old = vga_rseq(cinfo->regbase, CL_SEQR1E);
-               vga_wseq(cinfo->regbase, CL_SEQR1E, old | 0x1);
-               vga_wseq(cinfo->regbase, CL_SEQR1F, 0x40 | (val & 0x3f));
-       } else if (div == 1) {
-               /* VCLK = MCLK */
-               unsigned char old = vga_rseq(cinfo->regbase, CL_SEQR1E);
-               vga_wseq(cinfo->regbase, CL_SEQR1E, old & ~0x1);
-               vga_wseq(cinfo->regbase, CL_SEQR1F, 0x40 | (val & 0x3f));
-       } else {
-               vga_wseq(cinfo->regbase, CL_SEQR1F, val & 0x3f);
+       if (div) {
+               DPRINTK("Set %s as pixclock source.\n",
+                                       (div == 2) ? "MCLK/2" : "MCLK");
+               old1f |= 0x40;
+               old1e = vga_rseq(cinfo->regbase, CL_SEQR1E) & ~0x1;
+               if (div == 2)
+                       old1e |= 1;
+
+               vga_wseq(cinfo->regbase, CL_SEQR1E, old1e);
        }
+       vga_wseq(cinfo->regbase, CL_SEQR1F, old1f);
 }
 
 /*************************************************************************
@@ -904,19 +882,31 @@ static int cirrusfb_set_par_foo(struct fb_info *info)
        /* formula: VClk = (OSC * N) / (D * (1+P)) */
        /* Example: VClk = (14.31818 * 91) / (23 * (1+1)) = 28.325 MHz */
 
-       vga_wseq(regbase, CL_SEQRB, nom);
-       tmp = den << 1;
-       if (div != 0)
-               tmp |= 1;
+       if (cinfo->btype == BT_ALPINE) {
+               /* if freq is close to mclk or mclk/2 select mclk
+                * as clock source
+                */
+               int divMCLK = cirrusfb_check_mclk(cinfo, freq);
+               if (divMCLK)  {
+                       nom = 0;
+                       cirrusfb_set_mclk_as_source(cinfo, divMCLK);
+               }
+       }
+       if (nom) {
+               vga_wseq(regbase, CL_SEQRB, nom);
+               tmp = den << 1;
+               if (div != 0)
+                       tmp |= 1;
 
-       /* 6 bit denom; ONLY 5434!!! (bugged me 10 days) */
-       if ((cinfo->btype == BT_SD64) ||
-           (cinfo->btype == BT_ALPINE) ||
-           (cinfo->btype == BT_GD5480))
-               tmp |= 0x80;
+               /* 6 bit denom; ONLY 5434!!! (bugged me 10 days) */
+               if ((cinfo->btype == BT_SD64) ||
+                   (cinfo->btype == BT_ALPINE) ||
+                   (cinfo->btype == BT_GD5480))
+                       tmp |= 0x80;
 
-       DPRINTK("CL_SEQR1B: %ld\n", (long) tmp);
-       vga_wseq(regbase, CL_SEQR1B, tmp);
+               DPRINTK("CL_SEQR1B: %ld\n", (long) tmp);
+               vga_wseq(regbase, CL_SEQR1B, tmp);
+       }
 
        if (yres >= 1024)
                /* 1280x1024 */
@@ -1106,7 +1096,6 @@ static int cirrusfb_set_par_foo(struct fb_info *info)
 
                case BT_ALPINE:
                        DPRINTK(" (for GD543x)\n");
-                       cirrusfb_set_mclk(cinfo, regs.mclk, regs.divMCLK);
                        /* We already set SRF and SR1F */
                        break;
 
@@ -1179,7 +1168,6 @@ static int cirrusfb_set_par_foo(struct fb_info *info)
                case BT_ALPINE:
                        DPRINTK(" (for GD543x)\n");
                        vga_wseq(regbase, CL_SEQR7, 0xa7);
-                       cirrusfb_set_mclk(cinfo, regs.mclk, regs.divMCLK);
                        break;
 
                case BT_GD5480:
@@ -1257,7 +1245,6 @@ static int cirrusfb_set_par_foo(struct fb_info *info)
                case BT_ALPINE:
                        DPRINTK(" (for GD543x)\n");
                        vga_wseq(regbase, CL_SEQR7, 0xa9);
-                       cirrusfb_set_mclk(cinfo, regs.mclk, regs.divMCLK);
                        break;
 
                case BT_GD5480: