.long .Lduct # cr2: dispatchable unit control table
.long 0 # cr3: instruction authorization
.long 0 # cr4: instruction authorization
- .long 0xffffffff # cr5: primary-aste origin
+ .long .Lduct # cr5: primary-aste origin
.long 0 # cr6: I/O interrupts
.long 0 # cr7: secondary space segment table
.long 0 # cr8: access registers translation
.long 0 # cr13: home space segment table
.long 0xc0000000 # cr14: machine check handling off
.long 0 # cr15: linkage stack operations
-.Lduct: .long 0,0,0,0,0,0,0,0
- .long 0,0,0,0,0,0,0,0
.Lpcfpu:.long 0x00080000,0x80000000 + .Lchkfpu
.Lpccsp:.long 0x00080000,0x80000000 + .Lchkcsp
.Lpcmvpg:.long 0x00080000,0x80000000 + .Lchkmvpg
.Linittu: .long init_thread_union
.Lstartup_init:
.long startup_init
+ .align 64
+.Lduct: .long 0,0,0,0,.Lduald,0,0,0
+ .long 0,0,0,0,0,0,0,0
+ .align 128
+.Lduald:.rept 8
+ .long 0x80000000,0,0,0 # invalid access-list entries
+ .endr
.org 0x12000
.globl _ehead
.quad .Lduct # cr2: dispatchable unit control table
.quad 0 # cr3: instruction authorization
.quad 0 # cr4: instruction authorization
- .quad 0xffffffffffffffff # cr5: primary-aste origin
+ .quad .Lduct # cr5: primary-aste origin
.quad 0 # cr6: I/O interrupts
.quad 0 # cr7: secondary space segment table
.quad 0 # cr8: access registers translation
.quad 0 # cr13: home space segment table
.quad 0xc0000000 # cr14: machine check handling off
.quad 0 # cr15: linkage stack operations
-.Lduct: .long 0,0,0,0,0,0,0,0
- .long 0,0,0,0,0,0,0,0
.Lpcmsk:.quad 0x0000000180000000
.L4malign:.quad 0xffffffffffc00000
.Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8
.Lnop: .long 0x07000700
.Lparmaddr:
.quad PARMAREA
+ .align 64
+.Lduct: .long 0,0,0,0,.Lduald,0,0,0
+ .long 0,0,0,0,0,0,0,0
+ .align 128
+.Lduald:.rept 8
+ .long 0x80000000,0,0,0 # invalid access-list entries
+ .endr
.org 0x12000
.globl _ehead
}
/*
- * Check which address space is addressed by the access
- * register in S390_lowcore.exc_access_id.
- * Returns 1 for user space and 0 for kernel space.
+ * Returns the address space associated with the fault.
+ * Returns 0 for kernel space, 1 for user space and
+ * 2 for code execution in user space with noexec=on.
*/
-static int __check_access_register(struct pt_regs *regs, int error_code)
-{
- int areg = S390_lowcore.exc_access_id;
-
- if (areg == 0)
- /* Access via access register 0 -> kernel address */
- return 0;
- save_access_regs(current->thread.acrs);
- if (regs && areg < NUM_ACRS && current->thread.acrs[areg] <= 1)
- /*
- * access register contains 0 -> kernel address,
- * access register contains 1 -> user space address
- */
- return current->thread.acrs[areg];
-
- /* Something unhealthy was done with the access registers... */
- die("page fault via unknown access register", regs, error_code);
- do_exit(SIGKILL);
- return 0;
-}
-
-/*
- * Check which address space the address belongs to.
- * May return 1 or 2 for user space and 0 for kernel space.
- * Returns 2 for user space in primary addressing mode with
- * CONFIG_S390_EXEC_PROTECT on and kernel parameter noexec=on.
- */
-static inline int check_user_space(struct pt_regs *regs, int error_code)
+static inline int check_space(struct task_struct *tsk)
{
/*
- * The lowest two bits of S390_lowcore.trans_exc_code indicate
- * which paging table was used:
- * 0: Primary Segment Table Descriptor
- * 1: STD determined via access register
- * 2: Secondary Segment Table Descriptor
- * 3: Home Segment Table Descriptor
+ * The lowest two bits of S390_lowcore.trans_exc_code
+ * indicate which paging table was used.
*/
- int descriptor = S390_lowcore.trans_exc_code & 3;
- if (unlikely(descriptor == 1))
- return __check_access_register(regs, error_code);
- if (descriptor == 2)
- return current->thread.mm_segment.ar4;
- return ((descriptor != 0) ^ (switch_amode)) << s390_noexec;
+ int desc = S390_lowcore.trans_exc_code & 3;
+
+ if (desc == 3) /* Home Segment Table Descriptor */
+ return switch_amode == 0;
+ if (desc == 2) /* Secondary Segment Table Descriptor */
+ return tsk->thread.mm_segment.ar4;
+#ifdef CONFIG_S390_SWITCH_AMODE
+ if (unlikely(desc == 1)) { /* STD determined via access register */
+ /* %a0 always indicates primary space. */
+ if (S390_lowcore.exc_access_id != 0) {
+ save_access_regs(tsk->thread.acrs);
+ /*
+ * An alet of 0 indicates primary space.
+ * An alet of 1 indicates secondary space.
+ * Any other alet values generate an
+ * alen-translation exception.
+ */
+ if (tsk->thread.acrs[S390_lowcore.exc_access_id])
+ return tsk->thread.mm_segment.ar4;
+ }
+ }
+#endif
+ /* Primary Segment Table Descriptor */
+ return switch_amode << s390_noexec;
}
/*
* 11 Page translation -> Not present (nullification)
* 3b Region third trans. -> Not present (nullification)
*/
-static inline void __kprobes
+static inline void
do_exception(struct pt_regs *regs, unsigned long error_code, int is_protection)
{
struct task_struct *tsk;
struct mm_struct *mm;
struct vm_area_struct * vma;
unsigned long address;
- int user_address;
const struct exception_table_entry *fixup;
- int si_code = SEGV_MAPERR;
+ int si_code;
+ int space;
tsk = current;
mm = tsk->mm;
NULL pointer write access in kernel mode. */
if (!(regs->psw.mask & PSW_MASK_PSTATE)) {
address = 0;
- user_address = 0;
+ space = 0;
goto no_context;
}
* the address
*/
address = S390_lowcore.trans_exc_code & __FAIL_ADDR_MASK;
- user_address = check_user_space(regs, error_code);
+ space = check_space(tsk);
/*
* Verify that the fault happened in user space, that
* we are not in an interrupt and that there is a
* user context.
*/
- if (user_address == 0 || in_atomic() || !mm)
- goto no_context;
+ if (unlikely(space == 0 || in_atomic() || !mm))
+ goto no_context;
/*
* When we get here, the fault happened in the current
down_read(&mm->mmap_sem);
- vma = find_vma(mm, address);
- if (!vma)
- goto bad_area;
+ si_code = SEGV_MAPERR;
+ vma = find_vma(mm, address);
+ if (!vma)
+ goto bad_area;
#ifdef CONFIG_S390_EXEC_PROTECT
- if (unlikely((user_address == 2) && !(vma->vm_flags & VM_EXEC)))
+ if (unlikely((space == 2) && !(vma->vm_flags & VM_EXEC)))
if (!signal_return(mm, regs, address, error_code))
/*
* signal_return() has done an up_read(&mm->mmap_sem)
* The instruction that caused the program check will
* be repeated. Don't signal single step via SIGTRAP.
*/
- clear_tsk_thread_flag(current, TIF_SINGLE_STEP);
+ clear_tsk_thread_flag(tsk, TIF_SINGLE_STEP);
return;
/*
* Oops. The kernel tried to access some bad page. We'll have to
* terminate things with extreme prejudice.
*/
- if (user_address == 0)
+ if (space == 0)
printk(KERN_ALERT "Unable to handle kernel pointer dereference"
" at virtual kernel address %p\n", (void *)address);
else
goto no_context;
}
-void do_protection_exception(struct pt_regs *regs, unsigned long error_code)
+void __kprobes do_protection_exception(struct pt_regs *regs,
+ unsigned long error_code)
{
regs->psw.addr -= (error_code >> 16);
do_exception(regs, 4, 1);
}
-void do_dat_exception(struct pt_regs *regs, unsigned long error_code)
+void __kprobes do_dat_exception(struct pt_regs *regs, unsigned long error_code)
{
do_exception(regs, error_code & 0xff, 0);
}
projects / linux-2.6-omap-h63xx.git / commitdiff