]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
iwlwifi: send ADD_STA before RXON with assoc bit
authorEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Mon, 30 Jun 2008 09:23:06 +0000 (17:23 +0800)
committerJohn W. Linville <linville@tuxdriver.com>
Mon, 30 Jun 2008 21:37:39 +0000 (17:37 -0400)
This patch fixes a bug in association flow. As soon as RXON with assoc bit
is sent, uCode expects to have an entry in its station table that describe
the AP. Receiving a beacon from an HT AP before sending ADD_STA results a
uCode error. This patch sends first the ADD_STA (bcast and bssid) and only
then RXON with assoc bit set

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/iwlwifi/iwl4965-base.c

index a2dffe401c78007e3b459cda4f07773e077d5853..0a279d15e058a55232eb932b8cc42b431d705ae2 100644 (file)
@@ -241,16 +241,18 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv)
        /* cast away the const for active_rxon in this function */
        struct iwl_rxon_cmd *active_rxon = (void *)&priv->active_rxon;
        DECLARE_MAC_BUF(mac);
-       int rc = 0;
+       int ret;
+       bool new_assoc =
+               !!(priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK);
 
        if (!iwl_is_alive(priv))
-               return -1;
+               return -EBUSY;
 
        /* always get timestamp with Rx frame */
        priv->staging_rxon.flags |= RXON_FLG_TSF2HOST_MSK;
 
-       rc = iwl4965_check_rxon_cmd(&priv->staging_rxon);
-       if (rc) {
+       ret = iwl4965_check_rxon_cmd(&priv->staging_rxon);
+       if (ret) {
                IWL_ERROR("Invalid RXON configuration.  Not committing.\n");
                return -EINVAL;
        }
@@ -259,15 +261,13 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv)
         * iwl4965_rxon_assoc_cmd which is used to reconfigure filter
         * and other flags for the current radio configuration. */
        if (!iwl4965_full_rxon_required(priv)) {
-               rc = iwl_send_rxon_assoc(priv);
-               if (rc) {
-                       IWL_ERROR("Error setting RXON_ASSOC "
-                                 "configuration (%d).\n", rc);
-                       return rc;
+               ret = iwl_send_rxon_assoc(priv);
+               if (ret) {
+                       IWL_ERROR("Error setting RXON_ASSOC (%d)\n", ret);
+                       return ret;
                }
 
                memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
-
                return 0;
        }
 
@@ -278,22 +278,20 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv)
         * an RXON_ASSOC and the new config wants the associated mask enabled,
         * we must clear the associated from the active configuration
         * before we apply the new config */
-       if (iwl_is_associated(priv) &&
-           (priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK)) {
+       if (iwl_is_associated(priv) && new_assoc) {
                IWL_DEBUG_INFO("Toggling associated bit on current RXON\n");
                active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
 
-               rc = iwl_send_cmd_pdu(priv, REPLY_RXON,
+               ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
                                      sizeof(struct iwl_rxon_cmd),
                                      &priv->active_rxon);
 
                /* If the mask clearing failed then we set
                 * active_rxon back to what it was previously */
-               if (rc) {
+               if (ret) {
                        active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
-                       IWL_ERROR("Error clearing ASSOC_MSK on current "
-                                 "configuration (%d).\n", rc);
-                       return rc;
+                       IWL_ERROR("Error clearing ASSOC_MSK (%d)\n", ret);
+                       return ret;
                }
        }
 
@@ -301,18 +299,25 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv)
                       "* with%s RXON_FILTER_ASSOC_MSK\n"
                       "* channel = %d\n"
                       "* bssid = %s\n",
-                      ((priv->staging_rxon.filter_flags &
-                        RXON_FILTER_ASSOC_MSK) ? "" : "out"),
+                      (new_assoc ? "" : "out"),
                       le16_to_cpu(priv->staging_rxon.channel),
                       print_mac(mac, priv->staging_rxon.bssid_addr));
 
        iwl4965_set_rxon_hwcrypto(priv, !priv->hw_params.sw_crypto);
-       /* Apply the new configuration */
-       rc = iwl_send_cmd_pdu(priv, REPLY_RXON,
+
+       /* Apply the new configuration
+        * RXON unassoc clears the station table in uCode, send it before
+        * we add the bcast station. If assoc bit is set, we will send RXON
+        * after having added the bcast and bssid station.
+        */
+       if (!new_assoc) {
+               ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
                              sizeof(struct iwl_rxon_cmd), &priv->staging_rxon);
-       if (rc) {
-               IWL_ERROR("Error setting new configuration (%d).\n", rc);
-               return rc;
+               if (ret) {
+                       IWL_ERROR("Error setting new RXON (%d)\n", ret);
+                       return ret;
+               }
+               memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
        }
 
        iwlcore_clear_stations_table(priv);
@@ -322,27 +327,24 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv)
 
        iwl_init_sensitivity(priv);
 
-       memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
-
        /* If we issue a new RXON command which required a tune then we must
         * send a new TXPOWER command or we won't be able to Tx any frames */
-       rc = iwl_set_tx_power(priv, priv->tx_power_user_lmt, true);
-       if (rc) {
-               IWL_ERROR("Error sending TX power (%d).\n", rc);
-               return rc;
+       ret = iwl_set_tx_power(priv, priv->tx_power_user_lmt, true);
+       if (ret) {
+               IWL_ERROR("Error sending TX power (%d)\n", ret);
+               return ret;
        }
 
        /* Add the broadcast address so we can send broadcast frames */
        if (iwl_rxon_add_station(priv, iwl_bcast_addr, 0) ==
-           IWL_INVALID_STATION) {
+                                               IWL_INVALID_STATION) {
                IWL_ERROR("Error adding BROADCAST address for transmit.\n");
                return -EIO;
        }
 
        /* If we have set the ASSOC_MSK and we are in BSS mode then
         * add the IWL_AP_ID to the station rate table */
-       if (iwl_is_associated(priv) &&
-           (priv->iw_mode == IEEE80211_IF_TYPE_STA)) {
+       if (new_assoc && (priv->iw_mode == IEEE80211_IF_TYPE_STA)) {
                if (iwl_rxon_add_station(priv, priv->active_rxon.bssid_addr, 1)
                    == IWL_INVALID_STATION) {
                        IWL_ERROR("Error adding AP address for transmit.\n");
@@ -352,6 +354,17 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv)
                if (priv->default_wep_key &&
                    iwl_send_static_wepkey_cmd(priv, 0))
                        IWL_ERROR("Could not send WEP static key.\n");
+
+               /* Apply the new configuration
+                * RXON assoc doesn't clear the station table in uCode,
+                */
+               ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
+                             sizeof(struct iwl_rxon_cmd), &priv->staging_rxon);
+               if (ret) {
+                       IWL_ERROR("Error setting new RXON (%d)\n", ret);
+                       return ret;
+               }
+               memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
        }
 
        return 0;