]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[AVR32] Add support for AT32AP7001 and AT32AP7002
authorHaavard Skinnemoen <hskinnemoen@atmel.com>
Mon, 29 Oct 2007 14:28:07 +0000 (15:28 +0100)
committerHaavard Skinnemoen <hskinnemoen@atmel.com>
Fri, 25 Jan 2008 07:31:41 +0000 (08:31 +0100)
These are derivatives of the AT32AP7000 chip, which means that most of
the code stays the same. Rename a few files, functions, definitions
and config symbols to reflect that they apply to all AP700x chips, and
exclude some platform devices from chips where they aren't present.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12 files changed:
arch/avr32/Kconfig
arch/avr32/Makefile
arch/avr32/boards/atngw100/setup.c
arch/avr32/configs/atngw100_defconfig
arch/avr32/configs/atstk1002_defconfig
arch/avr32/mach-at32ap/Kconfig
arch/avr32/mach-at32ap/Makefile
arch/avr32/mach-at32ap/at32ap700x.c [moved from arch/avr32/mach-at32ap/at32ap7000.c with 99% similarity]
drivers/watchdog/Kconfig
include/asm-avr32/arch-at32ap/at32ap700x.h [moved from include/asm-avr32/arch-at32ap/at32ap7000.h with 89% similarity]
include/asm-avr32/arch-at32ap/cpu.h
include/asm-avr32/arch-at32ap/io.h

index 767a19cfa423f46124b3f11245ab01e98e764f75..e37e6b92658d53f83a4da900ca365e7df72e80b9 100644 (file)
@@ -84,13 +84,26 @@ config PLATFORM_AT32AP
        select MMU
        select PERFORMANCE_COUNTERS
 
+config CPU_AT32AP700X
+       bool
+       select PLATFORM_AT32AP
+
 choice
        prompt "AVR32 CPU type"
        default CPU_AT32AP7000
 
 config CPU_AT32AP7000
        bool "AT32AP7000"
-       select PLATFORM_AT32AP
+       select CPU_AT32AP700X
+
+config CPU_AT32AP7001
+       bool "AT32AP7001"
+       select CPU_AT32AP700X
+
+config CPU_AT32AP7002
+       bool "AT32AP7002"
+       select CPU_AT32AP700X
+
 endchoice
 
 #
@@ -126,15 +139,15 @@ source "arch/avr32/mach-at32ap/Kconfig"
 
 config LOAD_ADDRESS
        hex
-       default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
+       default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
 
 config ENTRY_ADDRESS
        hex
-       default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
+       default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
 
 config PHYS_OFFSET
        hex
-       default 0x10000000 if CPU_AT32AP7000=y
+       default 0x10000000 if CPU_AT32AP700X=y
 
 source "kernel/Kconfig.preempt"
 
index f75d52cd2a4c2c963bef5bc8325c0a07b433dc47..17a3529341ddef62eb5c6129a84e25622a280c4a 100644 (file)
@@ -16,7 +16,7 @@ KBUILD_AFLAGS += -mrelax -mno-pic
 CFLAGS_MODULE  += -mno-relax
 LDFLAGS_vmlinux        += --relax
 
-cpuflags-$(CONFIG_CPU_AT32AP7000)      += -mcpu=ap7000
+cpuflags-$(CONFIG_PLATFORM_AT32AP)     += -march=ap
 
 KBUILD_CFLAGS  += $(cpuflags-y)
 KBUILD_AFLAGS  += $(cpuflags-y)
index 52987c81d668d1c5825f3f209058e99080ab462e..a398be2849666bf974696ba383800df885ee3cf7 100644 (file)
@@ -20,7 +20,7 @@
 #include <asm/io.h>
 #include <asm/setup.h>
 
-#include <asm/arch/at32ap7000.h>
+#include <asm/arch/at32ap700x.h>
 #include <asm/arch/board.h>
 #include <asm/arch/init.h>
 #include <asm/arch/portmux.h>
index b799a68ffd9706d74afef2942d0ef0ea45b302ab..374c17bcc05e024f6f0b916ec8278b98a8939f4a 100644 (file)
@@ -111,7 +111,10 @@ CONFIG_SUBARCH_AVR32B=y
 CONFIG_MMU=y
 CONFIG_PERFORMANCE_COUNTERS=y
 CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP700X=y
 CONFIG_CPU_AT32AP7000=y
+# CONFIG_CPU_AT32AP7001 is not set
+# CONFIG_CPU_AT32AP7002 is not set
 # CONFIG_BOARD_ATSTK1000 is not set
 CONFIG_BOARD_ATNGW100=y
 CONFIG_LOADER_U_BOOT=y
@@ -119,9 +122,9 @@ CONFIG_LOADER_U_BOOT=y
 #
 # Atmel AVR32 AP options
 #
-# CONFIG_AP7000_32_BIT_SMC is not set
-CONFIG_AP7000_16_BIT_SMC=y
-# CONFIG_AP7000_8_BIT_SMC is not set
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
 CONFIG_LOAD_ADDRESS=0x10000000
 CONFIG_ENTRY_ADDRESS=0x90000000
 CONFIG_PHYS_OFFSET=0x10000000
index 3b977fdbaa78f25dd40af9d7f9affb955305d11a..7614c5465cd678201c7e362a75c6ad703a9414b0 100644 (file)
@@ -114,6 +114,8 @@ CONFIG_MMU=y
 CONFIG_PERFORMANCE_COUNTERS=y
 CONFIG_PLATFORM_AT32AP=y
 CONFIG_CPU_AT32AP7000=y
+# CONFIG_CPU_AT32AP7001 is not set
+# CONFIG_CPU_AT32AP7002 is not set
 CONFIG_BOARD_ATSTK1002=y
 CONFIG_BOARD_ATSTK1000=y
 # CONFIG_BOARD_ATNGW100 is not set
@@ -122,9 +124,9 @@ CONFIG_LOADER_U_BOOT=y
 #
 # Atmel AVR32 AP options
 #
-# CONFIG_AP7000_32_BIT_SMC is not set
-CONFIG_AP7000_16_BIT_SMC=y
-# CONFIG_AP7000_8_BIT_SMC is not set
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
 CONFIG_LOAD_ADDRESS=0x10000000
 CONFIG_ENTRY_ADDRESS=0x90000000
 CONFIG_PHYS_OFFSET=0x10000000
index eb307838457b3aea4b175e68759ce0d2186253c7..a7bbcc82058edc5828b7a67b3c90747f04ab5a88 100644 (file)
@@ -3,9 +3,9 @@ if PLATFORM_AT32AP
 menu "Atmel AVR32 AP options"
 
 choice
-       prompt "AT32AP7000 static memory bus width"
-       depends on CPU_AT32AP7000
-       default AP7000_16_BIT_SMC
+       prompt "AT32AP700x static memory bus width"
+       depends on CPU_AT32AP700X
+       default AP700X_16_BIT_SMC
        help
          Define the width of the AP7000 external static memory interface.
          This is used to determine how to mangle the address and/or data
@@ -15,13 +15,13 @@ choice
          width for all chip selects, excluding the flash (which is using
          raw access and is thus not affected by any of this.)
 
-config AP7000_32_BIT_SMC
+config AP700X_32_BIT_SMC
        bool "32 bit"
 
-config AP7000_16_BIT_SMC
+config AP700X_16_BIT_SMC
        bool "16 bit"
 
-config AP7000_8_BIT_SMC
+config AP700X_8_BIT_SMC
        bool "8 bit"
 
 endchoice
index a8b445046e3e3843135f2a1e4c21b93239b79d8b..5e9f8217befc16f4095918f8be3c710a1c4fb621 100644 (file)
@@ -1,4 +1,4 @@
 obj-y                          += at32ap.o clock.o intc.o extint.o pio.o hsmc.o
-obj-$(CONFIG_CPU_AT32AP7000)   += at32ap7000.o
-obj-$(CONFIG_CPU_AT32AP7000)   += time-tc.o
+obj-$(CONFIG_CPU_AT32AP700X)   += at32ap700x.o
+obj-$(CONFIG_CPU_AT32AP700X)   += time-tc.o
 obj-$(CONFIG_CPU_FREQ_AT32AP)  += cpufreq.o
similarity index 99%
rename from arch/avr32/mach-at32ap/at32ap7000.c
rename to arch/avr32/mach-at32ap/at32ap700x.c
index 7c4388f4f17ff697405455c39a0bd78641ae4ca9..9386e1f82fb8c16cf783bab5ace42650bee497d7 100644 (file)
@@ -14,7 +14,7 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/at32ap7000.h>
+#include <asm/arch/at32ap700x.h>
 #include <asm/arch/board.h>
 #include <asm/arch/portmux.h>
 
@@ -803,6 +803,7 @@ void __init at32_setup_serial_console(unsigned int usart_id)
  *  Ethernet
  * -------------------------------------------------------------------- */
 
+#ifdef CONFIG_CPU_AT32AP7000
 static struct eth_platform_data macb0_data;
 static struct resource macb0_resource[] = {
        PBMEM(0xfff01800),
@@ -890,6 +891,7 @@ at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
 
        return pdev;
 }
+#endif
 
 /* --------------------------------------------------------------------
  *  SPI
@@ -1064,6 +1066,7 @@ err_add_resources:
 /* --------------------------------------------------------------------
  *  LCDC
  * -------------------------------------------------------------------- */
+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
 static struct atmel_lcdfb_info atmel_lcdfb0_data;
 static struct resource atmel_lcdfb0_resource[] = {
        {
@@ -1179,6 +1182,7 @@ err_dup_modedb:
        kfree(monspecs);
        return NULL;
 }
+#endif
 
 /* --------------------------------------------------------------------
  *  SSC
@@ -1332,6 +1336,7 @@ out_free_pdev:
 /* --------------------------------------------------------------------
  * IDE / CompactFlash
  * -------------------------------------------------------------------- */
+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7001)
 static struct resource at32_smc_cs4_resource[] __initdata = {
        {
                .start  = 0x04000000,
@@ -1464,6 +1469,7 @@ fail:
        platform_device_put(pdev);
        return NULL;
 }
+#endif
 
 /* --------------------------------------------------------------------
  * AC97C
@@ -1639,16 +1645,20 @@ struct clk *at32_clock_list[] = {
        &atmel_usart1_usart,
        &atmel_usart2_usart,
        &atmel_usart3_usart,
+#if defined(CONFIG_CPU_AT32AP7000)
        &macb0_hclk,
        &macb0_pclk,
        &macb1_hclk,
        &macb1_pclk,
+#endif
        &atmel_spi0_spi_clk,
        &atmel_spi1_spi_clk,
        &atmel_twi0_pclk,
        &atmel_mci0_pclk,
+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
        &atmel_lcdfb0_hck1,
        &atmel_lcdfb0_pixclk,
+#endif
        &ssc0_pclk,
        &ssc1_pclk,
        &ssc2_pclk,
@@ -1697,7 +1707,9 @@ void __init at32_clock_init(void)
        genclk_init_parent(&gclk2);
        genclk_init_parent(&gclk3);
        genclk_init_parent(&gclk4);
+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
        genclk_init_parent(&atmel_lcdfb0_pixclk);
+#endif
        genclk_init_parent(&abdac0_sample_clk);
 
        /*
index 52dff40ec192caeea2042f07cb09021914c52c36..fbd61127b9d9942ccd96f1ddcbab383d7d2761a2 100644 (file)
@@ -223,7 +223,7 @@ config DAVINCI_WATCHDOG
 
 config AT32AP700X_WDT
        tristate "AT32AP700x watchdog"
-       depends on CPU_AT32AP7000
+       depends on CPU_AT32AP700X
        help
          Watchdog timer embedded into AT32AP700x devices. This will reboot
          your system when the timeout is reached.
similarity index 89%
rename from include/asm-avr32/arch-at32ap/at32ap7000.h
rename to include/asm-avr32/arch-at32ap/at32ap700x.h
index 3914d7b94ff4e7b6c7181f067df744c484ad7caa..99684d6f39677fbb29a1a4481be58bc226d31204 100644 (file)
@@ -7,8 +7,8 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#ifndef __ASM_ARCH_AT32AP7000_H__
-#define __ASM_ARCH_AT32AP7000_H__
+#ifndef __ASM_ARCH_AT32AP700X_H__
+#define __ASM_ARCH_AT32AP700X_H__
 
 #define GPIO_PERIPH_A  0
 #define GPIO_PERIPH_B  1
@@ -32,4 +32,4 @@
 #define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N))
 #define GPIO_PIN_PE(N) (GPIO_PIOE_BASE + (N))
 
-#endif /* __ASM_ARCH_AT32AP7000_H__ */
+#endif /* __ASM_ARCH_AT32AP700X_H__ */
index a762f42cbb71538d0eb5d0f484ccda952aa2132d..0dc20261c1ea2d8a02ef094f28afb59b6550d7cf 100644 (file)
@@ -14,7 +14,7 @@
  * Only AT32AP7000 is defined for now. We can identify the specific
  * chip at runtime, but I'm not sure if it's really worth it.
  */
-#ifdef CONFIG_CPU_AT32AP7000
+#ifdef CONFIG_CPU_AT32AP700X
 # define cpu_is_at32ap7000()   (1)
 #else
 # define cpu_is_at32ap7000()   (0)
index ee59e401f041569af2a7077540f371add0362160..4ec6abc68ea38084fae0a1d269f5fd53ebe34589 100644 (file)
@@ -4,7 +4,7 @@
 /* For "bizarre" halfword swapping */
 #include <linux/byteorder/swabb.h>
 
-#if defined(CONFIG_AP7000_32_BIT_SMC)
+#if defined(CONFIG_AP700X_32_BIT_SMC)
 # define __swizzle_addr_b(addr)        (addr ^ 3UL)
 # define __swizzle_addr_w(addr)        (addr ^ 2UL)
 # define __swizzle_addr_l(addr)        (addr)
@@ -14,7 +14,7 @@
 # define __mem_ioswabb(a, x)   (x)
 # define __mem_ioswabw(a, x)   swab16(x)
 # define __mem_ioswabl(a, x)   swab32(x)
-#elif defined(CONFIG_AP7000_16_BIT_SMC)
+#elif defined(CONFIG_AP700X_16_BIT_SMC)
 # define __swizzle_addr_b(addr)        (addr ^ 1UL)
 # define __swizzle_addr_w(addr)        (addr)
 # define __swizzle_addr_l(addr)        (addr)