* SBP2 specific structures and defines
*/
-#define ORB_DIRECTION_WRITE_TO_MEDIA 0x0
-#define ORB_DIRECTION_READ_FROM_MEDIA 0x1
-#define ORB_DIRECTION_NO_DATA_TRANSFER 0x2
-
-#define ORB_SET_NULL_PTR(value) ((value & 0x1) << 31)
-#define ORB_SET_NOTIFY(value) ((value & 0x1) << 31)
-#define ORB_SET_RQ_FMT(value) ((value & 0x3) << 29) /* unused ? */
-#define ORB_SET_NODE_ID(value) ((value & 0xffff) << 16)
-#define ORB_SET_STATUS_FIFO_HI(value, id) (value >> 32 | ORB_SET_NODE_ID(id))
-#define ORB_SET_STATUS_FIFO_LO(value) (value & 0xffffffff)
-#define ORB_SET_DATA_SIZE(value) (value & 0xffff)
-#define ORB_SET_PAGE_SIZE(value) ((value & 0x7) << 16)
-#define ORB_SET_PAGE_TABLE_PRESENT(value) ((value & 0x1) << 19)
-#define ORB_SET_MAX_PAYLOAD(value) ((value & 0xf) << 20)
-#define ORB_SET_SPEED(value) ((value & 0x7) << 24)
-#define ORB_SET_DIRECTION(value) ((value & 0x1) << 27)
+#define ORB_DIRECTION_WRITE_TO_MEDIA 0x0
+#define ORB_DIRECTION_READ_FROM_MEDIA 0x1
+#define ORB_DIRECTION_NO_DATA_TRANSFER 0x2
+
+#define ORB_SET_NULL_PTR(v) (((v) & 0x1) << 31)
+#define ORB_SET_NOTIFY(v) (((v) & 0x1) << 31)
+#define ORB_SET_RQ_FMT(v) (((v) & 0x3) << 29)
+#define ORB_SET_NODE_ID(v) (((v) & 0xffff) << 16)
+#define ORB_SET_STATUS_FIFO_HI(v, id) ((v) >> 32 | ORB_SET_NODE_ID(id))
+#define ORB_SET_STATUS_FIFO_LO(v) ((v) & 0xffffffff)
+#define ORB_SET_DATA_SIZE(v) ((v) & 0xffff)
+#define ORB_SET_PAGE_SIZE(v) (((v) & 0x7) << 16)
+#define ORB_SET_PAGE_TABLE_PRESENT(v) (((v) & 0x1) << 19)
+#define ORB_SET_MAX_PAYLOAD(v) (((v) & 0xf) << 20)
+#define ORB_SET_SPEED(v) (((v) & 0x7) << 24)
+#define ORB_SET_DIRECTION(v) (((v) & 0x1) << 27)
struct sbp2_command_orb {
u32 next_ORB_hi;
#define SBP2_LOGICAL_UNIT_RESET 0xe
#define SBP2_TARGET_RESET_REQUEST 0xf
-#define ORB_SET_LUN(value) (value & 0xffff)
-#define ORB_SET_FUNCTION(value) ((value & 0xf) << 16)
-#define ORB_SET_RECONNECT(value) ((value & 0xf) << 20)
-#define ORB_SET_EXCLUSIVE(value) ((value & 0x1) << 28)
-#define ORB_SET_LOGIN_RESP_LENGTH(value) (value & 0xffff)
-#define ORB_SET_PASSWD_LENGTH(value) ((value & 0xffff) << 16)
+#define ORB_SET_LUN(v) ((v) & 0xffff)
+#define ORB_SET_FUNCTION(v) (((v) & 0xf) << 16)
+#define ORB_SET_RECONNECT(v) (((v) & 0xf) << 20)
+#define ORB_SET_EXCLUSIVE(v) (((v) & 0x1) << 28)
+#define ORB_SET_LOGIN_RESP_LENGTH(v) ((v) & 0xffff)
+#define ORB_SET_PASSWD_LENGTH(v) (((v) & 0xffff) << 16)
struct sbp2_login_orb {
u32 password_hi;
u32 status_fifo_lo;
} __attribute__((packed));
-#define RESPONSE_GET_LOGIN_ID(value) (value & 0xffff)
-#define RESPONSE_GET_LENGTH(value) ((value >> 16) & 0xffff)
-#define RESPONSE_GET_RECONNECT_HOLD(value) (value & 0xffff)
+#define RESPONSE_GET_LOGIN_ID(v) ((v) & 0xffff)
+#define RESPONSE_GET_LENGTH(v) (((v) >> 16) & 0xffff)
+#define RESPONSE_GET_RECONNECT_HOLD(v) ((v) & 0xffff)
struct sbp2_login_response {
u32 length_login_ID;
u32 reconnect_hold;
} __attribute__((packed));
-#define ORB_SET_LOGIN_ID(value) (value & 0xffff)
-
-#define ORB_SET_QUERY_LOGINS_RESP_LENGTH(value) (value & 0xffff)
+#define ORB_SET_LOGIN_ID(v) ((v) & 0xffff)
+#define ORB_SET_QUERY_LOGINS_RESP_LENGTH(v) ((v) & 0xffff)
struct sbp2_query_logins_orb {
u32 reserved1;
u32 status_fifo_lo;
} __attribute__((packed));
-#define RESPONSE_GET_MAX_LOGINS(value) (value & 0xffff)
-#define RESPONSE_GET_ACTIVE_LOGINS(value) ((RESPONSE_GET_LENGTH(value) - 4) / 12)
+#define RESPONSE_GET_MAX_LOGINS(v) ((v) & 0xffff)
+#define RESPONSE_GET_ACTIVE_LOGINS(v) ((RESPONSE_GET_LENGTH((v)) - 4) / 12)
struct sbp2_query_logins_response {
u32 length_max_logins;
u32 status_fifo_lo;
} __attribute__((packed));
-#define PAGE_TABLE_SET_SEGMENT_BASE_HI(value) (value & 0xffff)
-#define PAGE_TABLE_SET_SEGMENT_LENGTH(value) ((value & 0xffff) << 16)
+#define PAGE_TABLE_SET_SEGMENT_BASE_HI(v) ((v) & 0xffff)
+#define PAGE_TABLE_SET_SEGMENT_LENGTH(v) (((v) & 0xffff) << 16)
struct sbp2_unrestricted_page_table {
u32 length_segment_base_hi;
#define SFMT_DEFERRED_ERROR 0x1
#define SFMT_VENDOR_DEPENDENT_STATUS 0x3
-#define SBP2_SCSI_STATUS_GOOD 0x0
-#define SBP2_SCSI_STATUS_CHECK_CONDITION 0x2
-#define SBP2_SCSI_STATUS_CONDITION_MET 0x4
-#define SBP2_SCSI_STATUS_BUSY 0x8
-#define SBP2_SCSI_STATUS_RESERVATION_CONFLICT 0x18
-#define SBP2_SCSI_STATUS_COMMAND_TERMINATED 0x22
-
-#define SBP2_SCSI_STATUS_SELECTION_TIMEOUT 0xff
-
-#define STATUS_GET_SRC(value) (((value) >> 30) & 0x3)
-#define STATUS_GET_RESP(value) (((value) >> 28) & 0x3)
-#define STATUS_GET_LEN(value) (((value) >> 24) & 0x7)
-#define STATUS_GET_SBP_STATUS(value) (((value) >> 16) & 0xff)
-#define STATUS_GET_ORB_OFFSET_HI(value) ((value) & 0x0000ffff)
-#define STATUS_TEST_DEAD(value) ((value) & 0x08000000)
+#define STATUS_GET_SRC(v) (((v) >> 30) & 0x3)
+#define STATUS_GET_RESP(v) (((v) >> 28) & 0x3)
+#define STATUS_GET_LEN(v) (((v) >> 24) & 0x7)
+#define STATUS_GET_SBP_STATUS(v) (((v) >> 16) & 0xff)
+#define STATUS_GET_ORB_OFFSET_HI(v) ((v) & 0x0000ffff)
+#define STATUS_TEST_DEAD(v) ((v) & 0x08000000)
/* test 'resp' | 'dead' | 'sbp2_status' */
-#define STATUS_TEST_RDS(value) ((value) & 0x38ff0000)
+#define STATUS_TEST_RDS(v) ((v) & 0x38ff0000)
struct sbp2_status_block {
u32 ORB_offset_hi_misc;
* Miscellaneous SBP2 related config rom defines
*/
-#define SBP2_UNIT_DIRECTORY_OFFSET_KEY 0xd1
-#define SBP2_CSR_OFFSET_KEY 0x54
-#define SBP2_UNIT_SPEC_ID_KEY 0x12
-#define SBP2_UNIT_SW_VERSION_KEY 0x13
-#define SBP2_COMMAND_SET_SPEC_ID_KEY 0x38
-#define SBP2_COMMAND_SET_KEY 0x39
-#define SBP2_UNIT_CHARACTERISTICS_KEY 0x3a
-#define SBP2_DEVICE_TYPE_AND_LUN_KEY 0x14
-#define SBP2_FIRMWARE_REVISION_KEY 0x3c
+#define SBP2_UNIT_DIRECTORY_OFFSET_KEY 0xd1
+#define SBP2_CSR_OFFSET_KEY 0x54
+#define SBP2_UNIT_SPEC_ID_KEY 0x12
+#define SBP2_UNIT_SW_VERSION_KEY 0x13
+#define SBP2_COMMAND_SET_SPEC_ID_KEY 0x38
+#define SBP2_COMMAND_SET_KEY 0x39
+#define SBP2_UNIT_CHARACTERISTICS_KEY 0x3a
+#define SBP2_DEVICE_TYPE_AND_LUN_KEY 0x14
+#define SBP2_FIRMWARE_REVISION_KEY 0x3c
-#define SBP2_AGENT_STATE_OFFSET 0x00ULL
-#define SBP2_AGENT_RESET_OFFSET 0x04ULL
-#define SBP2_ORB_POINTER_OFFSET 0x08ULL
-#define SBP2_DOORBELL_OFFSET 0x10ULL
-#define SBP2_UNSOLICITED_STATUS_ENABLE_OFFSET 0x14ULL
-#define SBP2_UNSOLICITED_STATUS_VALUE 0xf
+#define SBP2_AGENT_STATE_OFFSET 0x00ULL
+#define SBP2_AGENT_RESET_OFFSET 0x04ULL
+#define SBP2_ORB_POINTER_OFFSET 0x08ULL
+#define SBP2_DOORBELL_OFFSET 0x10ULL
+#define SBP2_UNSOLICITED_STATUS_ENABLE_OFFSET 0x14ULL
+#define SBP2_UNSOLICITED_STATUS_VALUE 0xf
-#define SBP2_BUSY_TIMEOUT_ADDRESS 0xfffff0000210ULL
-#define SBP2_BUSY_TIMEOUT_VALUE 0xf
+#define SBP2_BUSY_TIMEOUT_ADDRESS 0xfffff0000210ULL
+#define SBP2_BUSY_TIMEOUT_VALUE 0xf
-#define SBP2_AGENT_RESET_DATA 0xf
+#define SBP2_AGENT_RESET_DATA 0xf
/*
* Unit spec id and sw version entry for SBP-2 devices
*/
-#define SBP2_UNIT_SPEC_ID_ENTRY 0x0000609e
-#define SBP2_SW_VERSION_ENTRY 0x00010483
+#define SBP2_UNIT_SPEC_ID_ENTRY 0x0000609e
+#define SBP2_SW_VERSION_ENTRY 0x00010483
/*
* SCSI specific stuff
*/
-#define SBP2_MAX_SG_ELEMENT_LENGTH 0xf000
-#define SBP2_MAX_SECTORS 255 /* Max sectors supported */
-#define SBP2_MAX_CMDS 8 /* This should be safe */
+#define SBP2_MAX_SG_ELEMENT_LENGTH 0xf000
+#define SBP2_MAX_SECTORS 255
+/* There is no real limitation of the queue depth (i.e. length of the linked
+ * list of command ORBs) at the target. The chosen depth is merely an
+ * implementation detail of the sbp2 driver. */
+#define SBP2_MAX_CMDS 8
-/* Flags for detected oddities and brokeness */
-#define SBP2_WORKAROUND_128K_MAX_TRANS 0x1
-#define SBP2_WORKAROUND_INQUIRY_36 0x2
-#define SBP2_WORKAROUND_MODE_SENSE_8 0x4
-#define SBP2_WORKAROUND_FIX_CAPACITY 0x8
-#define SBP2_WORKAROUND_OVERRIDE 0x100
+#define SBP2_SCSI_STATUS_GOOD 0x0
+#define SBP2_SCSI_STATUS_CHECK_CONDITION 0x2
+#define SBP2_SCSI_STATUS_CONDITION_MET 0x4
+#define SBP2_SCSI_STATUS_BUSY 0x8
+#define SBP2_SCSI_STATUS_RESERVATION_CONFLICT 0x18
+#define SBP2_SCSI_STATUS_COMMAND_TERMINATED 0x22
+#define SBP2_SCSI_STATUS_SELECTION_TIMEOUT 0xff
/* This is the two dma types we use for cmd_dma below */
enum cmd_dma_types {
struct list_head scsi_ids; /* List of scsi ids on this host */
};
+/* Flags for detected oddities and brokeness */
+#define SBP2_WORKAROUND_128K_MAX_TRANS 0x1
+#define SBP2_WORKAROUND_INQUIRY_36 0x2
+#define SBP2_WORKAROUND_MODE_SENSE_8 0x4
+#define SBP2_WORKAROUND_FIX_CAPACITY 0x8
+#define SBP2_WORKAROUND_OVERRIDE 0x100
+
#endif /* SBP2_H */
projects / linux-2.6-omap-h63xx.git / commitdiff