]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
ide-tape: struct idetape_tape_t: remove unused members
authorBorislav Petkov <petkovbb@googlemail.com>
Wed, 6 Feb 2008 01:57:52 +0000 (02:57 +0100)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Wed, 6 Feb 2008 01:57:52 +0000 (02:57 +0100)
- last_frame_position: only being written to once
- firmware_revision, product_id, vendor_id: used once, remove from struct
  idetape_tape_t and deal with them locally
- firmware_revision_num: only written to once
- tape_still_time_begin: completely unused
- tape_still_time: never written to; remove corresponding code chunk
- uncontrolled_last_pipeline_head: only once written to
- blocks_in_buffer: only written to

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/ide-tape.c

index 73f06c859301d332085d5c2663672fab98924fb7..ad13527ff44076cd78f0a1bcc9fd843eb2a1bd9e 100644 (file)
@@ -311,8 +311,6 @@ typedef struct ide_tape_obj {
        u8 partition;
        /* Current block */
        unsigned int first_frame_position;
-       unsigned int last_frame_position;
-       unsigned int blocks_in_buffer;
 
        /*
         *      Last error information
@@ -399,11 +397,6 @@ typedef struct ide_tape_obj {
        int avg_size;
        int avg_speed;
 
-       char vendor_id[10];
-       char product_id[18];
-       char firmware_revision[6];
-       int firmware_revision_num;
-
        /* the door is currently locked */
        int door_locked;
        /* the tape hardware is write protected */
@@ -440,12 +433,6 @@ typedef struct ide_tape_obj {
        int max_insert_speed;
        int measure_insert_time;
 
-       /*
-        * Measure tape still time, in milliseconds
-        */
-       unsigned long tape_still_time_begin;
-       int tape_still_time;
-
        /*
         * Speed regulation negative feedback loop
         */
@@ -454,7 +441,6 @@ typedef struct ide_tape_obj {
        int controlled_pipeline_head_speed;
        int uncontrolled_pipeline_head_speed;
        int controlled_last_pipeline_head;
-       int uncontrolled_last_pipeline_head;
        unsigned long uncontrolled_pipeline_head_time;
        unsigned long controlled_pipeline_head_time;
        int controlled_previous_pipeline_head;
@@ -1696,8 +1682,6 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
                drive->post_reset = 0;
        }
 
-       if (tape->tape_still_time > 100 && tape->tape_still_time < 200)
-               tape->measure_insert_time = 1;
        if (time_after(jiffies, tape->insert_time))
                tape->insert_speed = tape->insert_size / 1024 * HZ / (jiffies - tape->insert_time);
        idetape_calculate_speeds(drive);
@@ -2009,9 +1993,6 @@ static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive)
                        tape->partition = readpos[1];
                        tape->first_frame_position =
                                be32_to_cpu(*(u32 *)&readpos[4]);
-                       tape->last_frame_position =
-                               be32_to_cpu(*(u32 *)&readpos[8]);
-                       tape->blocks_in_buffer = readpos[15];
                        set_bit(IDETAPE_ADDRESS_VALID, &tape->flags);
                        idetape_end_request(drive, 1, 0);
                }
@@ -2540,7 +2521,7 @@ static void idetape_restart_speed_control (ide_drive_t *drive)
 
        tape->restart_speed_control_req = 0;
        tape->pipeline_head = 0;
-       tape->controlled_last_pipeline_head = tape->uncontrolled_last_pipeline_head = 0;
+       tape->controlled_last_pipeline_head = 0;
        tape->controlled_previous_pipeline_head = tape->uncontrolled_previous_pipeline_head = 0;
        tape->pipeline_head_speed = tape->controlled_pipeline_head_speed = 5000;
        tape->uncontrolled_pipeline_head_speed = 0;
@@ -3438,9 +3419,9 @@ static int idetape_identify_device (ide_drive_t *drive)
 
 static void idetape_get_inquiry_results(ide_drive_t *drive)
 {
-       char *r;
        idetape_tape_t *tape = drive->driver_data;
        idetape_pc_t pc;
+       char fw_rev[6], vendor_id[10], product_id[18];
 
        idetape_create_inquiry_cmd(&pc);
        if (idetape_queue_pc_tail(drive, &pc)) {
@@ -3448,20 +3429,16 @@ static void idetape_get_inquiry_results(ide_drive_t *drive)
                                tape->name);
                return;
        }
-       memcpy(tape->vendor_id, &pc.buffer[8], 8);
-       memcpy(tape->product_id, &pc.buffer[16], 16);
-       memcpy(tape->firmware_revision, &pc.buffer[32], 4);
-
-       ide_fixstring(tape->vendor_id, 10, 0);
-       ide_fixstring(tape->product_id, 18, 0);
-       ide_fixstring(tape->firmware_revision, 6, 0);
-       r = tape->firmware_revision;
-       if (*(r + 1) == '.')
-               tape->firmware_revision_num = (*r - '0') * 100 +
-                       (*(r + 2) - '0') * 10 + *(r + 3) - '0';
+       memcpy(vendor_id, &pc.buffer[8], 8);
+       memcpy(product_id, &pc.buffer[16], 16);
+       memcpy(fw_rev, &pc.buffer[32], 4);
+
+       ide_fixstring(vendor_id, 10, 0);
+       ide_fixstring(product_id, 18, 0);
+       ide_fixstring(fw_rev, 6, 0);
+
        printk(KERN_INFO "ide-tape: %s <-> %s: %s %s rev %s\n",
-                       drive->name, tape->name, tape->vendor_id,
-                       tape->product_id, tape->firmware_revision);
+                       drive->name, tape->name, vendor_id, product_id, fw_rev);
 }
 
 /*