--- /dev/null
+/**************************************************************************
+
+ Copyright 2006 Dave Airlie <airlied@linux.ie>
+
+All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of this software and associated documentation files (the "Software"),
+to deal in the Software without restriction, including without limitation
+on the rights to use, copy, modify, merge, publish, distribute, sub
+license, and/or sell copies of the Software, and to permit persons to whom
+the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice (including the next
+paragraph) shall be included in all copies or substantial portions of the
+Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+THE COPYRIGHT HOLDERS AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM,
+DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+**************************************************************************/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/fb.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-id.h>
+#include <linux/i2c-algo-bit.h>
+
+#include <asm/io.h>
+
+#include "intelfb.h"
+#include "intelfbhw.h"
+
+/* bit locations in the registers */
+#define SCL_DIR_MASK 0x0001
+#define SCL_DIR 0x0002
+#define SCL_VAL_MASK 0x0004
+#define SCL_VAL_OUT 0x0008
+#define SCL_VAL_IN 0x0010
+#define SDA_DIR_MASK 0x0100
+#define SDA_DIR 0x0200
+#define SDA_VAL_MASK 0x0400
+#define SDA_VAL_OUT 0x0800
+#define SDA_VAL_IN 0x1000
+
+static void intelfb_gpio_setscl(void *data, int state)
+{
+ struct intelfb_i2c_chan *chan = data;
+ struct intelfb_info *dinfo = chan->dinfo;
+ u32 val;
+
+ OUTREG(chan->reg, (state ? SCL_VAL_OUT : 0) | SCL_DIR | SCL_DIR_MASK | SCL_VAL_MASK);
+ val = INREG(chan->reg);
+}
+
+static void intelfb_gpio_setsda(void *data, int state)
+{
+ struct intelfb_i2c_chan *chan = data;
+ struct intelfb_info *dinfo = chan->dinfo;
+ u32 val;
+
+ OUTREG(chan->reg, (state ? SDA_VAL_OUT : 0) | SDA_DIR | SDA_DIR_MASK | SDA_VAL_MASK);
+ val = INREG(chan->reg);
+}
+
+static int intelfb_gpio_getscl(void *data)
+{
+ struct intelfb_i2c_chan *chan = data;
+ struct intelfb_info *dinfo = chan->dinfo;
+ u32 val;
+
+ OUTREG(chan->reg, SCL_DIR_MASK);
+ OUTREG(chan->reg, 0);
+ val = INREG(chan->reg);
+ return ((val & SCL_VAL_IN) != 0);
+}
+
+static int intelfb_gpio_getsda(void *data)
+{
+ struct intelfb_i2c_chan *chan = data;
+ struct intelfb_info *dinfo = chan->dinfo;
+ u32 val;
+
+ OUTREG(chan->reg, SDA_DIR_MASK);
+ OUTREG(chan->reg, 0);
+ val = INREG(chan->reg);
+ return ((val & SDA_VAL_IN) != 0);
+}
+
+static int intelfb_setup_i2c_bus(struct intelfb_info *dinfo,
+ struct intelfb_i2c_chan *chan,
+ const u32 reg, const char *name)
+{
+ int rc;
+
+ chan->dinfo = dinfo;
+ chan->reg = reg;
+ snprintf(chan->adapter.name, I2C_NAME_SIZE, "intelfb %s", name);
+ chan->adapter.owner = THIS_MODULE;
+ chan->adapter.id = I2C_HW_B_INTELFB;
+ chan->adapter.algo_data = &chan->algo;
+ chan->adapter.dev.parent = &chan->dinfo->pdev->dev;
+ chan->algo.setsda = intelfb_gpio_setsda;
+ chan->algo.setscl = intelfb_gpio_setscl;
+ chan->algo.getsda = intelfb_gpio_getsda;
+ chan->algo.getscl = intelfb_gpio_getscl;
+ chan->algo.udelay = 40;
+ chan->algo.timeout = 20;
+ chan->algo.data = chan;
+
+ i2c_set_adapdata(&chan->adapter, chan);
+
+ /* Raise SCL and SDA */
+ intelfb_gpio_setsda(chan, 1);
+ intelfb_gpio_setscl(chan, 1);
+ udelay(20);
+
+ rc = i2c_bit_add_bus(&chan->adapter);
+ if (rc == 0)
+ DBG_MSG("I2C bus %s registered.\n", name);
+ else
+ WRN_MSG("Failed to register I2C bus %s.\n", name);
+ return rc;
+}
+
+void intelfb_create_i2c_busses(struct intelfb_info *dinfo)
+{
+ int i = 0;
+
+ /* everyone has at least a single analog output */
+ dinfo->num_outputs = 1;
+ dinfo->output[i].type = INTELFB_OUTPUT_ANALOG;
+
+ /* setup the DDC bus for analog output */
+ intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].ddc_bus, GPIOA, "CRTDDC_A");
+ i++;
+
+ /* need to add the output busses for each device
+ - this function is very incomplete
+ - i915GM has LVDS and TVOUT for example
+ */
+ switch(dinfo->chipset) {
+ case INTEL_830M:
+ case INTEL_845G:
+ case INTEL_855GM:
+ case INTEL_865G:
+ dinfo->output[i].type = INTELFB_OUTPUT_DVO;
+ intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].ddc_bus, GPIOD, "DVODDC_D");
+ intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].i2c_bus, GPIOE, "DVOI2C_E");
+ i++;
+ break;
+ case INTEL_915G:
+ case INTEL_915GM:
+ /* has some LVDS + tv-out */
+ case INTEL_945G:
+ case INTEL_945GM:
+ /* SDVO ports have a single control bus - 2 devices */
+ dinfo->output[i].type = INTELFB_OUTPUT_SDVO;
+ intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].i2c_bus, GPIOE, "SDVOCTRL_E");
+ /* TODO: initialize the SDVO */
+// I830SDVOInit(pScrn, i, DVOB);
+ i++;
+
+ /* set up SDVOC */
+ dinfo->output[i].type = INTELFB_OUTPUT_SDVO;
+ dinfo->output[i].i2c_bus = dinfo->output[i - 1].i2c_bus;
+ /* TODO: initialize the SDVO */
+// I830SDVOInit(pScrn, i, DVOC);
+ i++;
+ break;
+ }
+ dinfo->num_outputs = i;
+}
projects / linux-2.6-omap-h63xx.git / commitdiff