--- /dev/null
+/*
+ * AIRcable USB Bluetooth Dongle Driver.
+ *
+ * Copyright (C) 2006 Manuel Francisco Naranjo (naranjo.manuel@gmail.com)
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ *
+ * The device works as an standard CDC device, it has 2 interfaces, the first
+ * one is for firmware access and the second is the serial one.
+ * The protocol is very simply, there are two posibilities reading or writing.
+ * When writting the first urb must have a Header that starts with 0x20 0x29 the
+ * next two bytes must say how much data will be sended.
+ * When reading the process is almost equal except that the header starts with
+ * 0x00 0x20.
+ *
+ * The device simply need some stuff to understand data comming from the usb
+ * buffer: The First and Second byte is used for a Header, the Third and Fourth
+ * tells the device the amount of information the package holds.
+ * Packages are 60 bytes long Header Stuff.
+ * When writting to the device the first two bytes of the header are 0x20 0x29
+ * When reading the bytes are 0x00 0x20, or 0x00 0x10, there is an strange
+ * situation, when too much data arrives to the device because it sends the data
+ * but with out the header. I will use a simply hack to override this situation,
+ * if there is data coming that does not contain any header, then that is data
+ * that must go directly to the tty, as there is no documentation about if there
+ * is any other control code, I will simply check for the first
+ * one.
+ *
+ * The driver registers himself with the USB-serial core and the USB Core. I had
+ * to implement a probe function agains USB-serial, because other way, the
+ * driver was attaching himself to both interfaces. I have tryed with different
+ * configurations of usb_serial_driver with out exit, only the probe function
+ * could handle this correctly.
+ *
+ * I have taken some info from a Greg Kroah-Hartman article:
+ * http://www.linuxjournal.com/article/6573
+ * And from Linux Device Driver Kit CD, which is a great work, the authors taken
+ * the work to recompile lots of information an knowladge in drivers development
+ * and made it all avaible inside a cd.
+ * URL: http://kernel.org/pub/linux/kernel/people/gregkh/ddk/
+ *
+ */
+
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/circ_buf.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+static int debug;
+
+/* Vendor and Product ID */
+#define AIRCABLE_VID 0x16CA
+#define AIRCABLE_USB_PID 0x1502
+
+/* write buffer size defines */
+#define AIRCABLE_BUF_SIZE 2048
+
+/* Protocol Stuff */
+#define HCI_HEADER_LENGTH 0x4
+#define TX_HEADER_0 0x20
+#define TX_HEADER_1 0x29
+#define RX_HEADER_0 0x00
+#define RX_HEADER_1 0x20
+#define MAX_HCI_FRAMESIZE 60
+#define HCI_COMPLETE_FRAME 64
+
+/* rx_flags */
+#define THROTTLED 0x01
+#define ACTUALLY_THROTTLED 0x02
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v1.0b2"
+#define DRIVER_AUTHOR "Naranjo, Manuel Francisco <naranjo.manuel@gmail.com>"
+#define DRIVER_DESC "AIRcable USB Driver"
+
+/* ID table that will be registered with USB core */
+static struct usb_device_id id_table [] = {
+ { USB_DEVICE(AIRCABLE_VID, AIRCABLE_USB_PID) },
+ { },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+
+/* Internal Structure */
+struct aircable_private {
+ spinlock_t rx_lock; /* spinlock for the receive lines */
+ struct circ_buf *tx_buf; /* write buffer */
+ struct circ_buf *rx_buf; /* read buffer */
+ int rx_flags; /* for throttilng */
+ struct work_struct rx_work; /* work cue for the receiving line */
+};
+
+/* Private methods */
+
+/* Circular Buffer Methods, code from ti_usb_3410_5052 used */
+/*
+ * serial_buf_clear
+ *
+ * Clear out all data in the circular buffer.
+ */
+static void serial_buf_clear(struct circ_buf *cb)
+{
+ cb->head = cb->tail = 0;
+}
+
+/*
+ * serial_buf_alloc
+ *
+ * Allocate a circular buffer and all associated memory.
+ */
+static struct circ_buf *serial_buf_alloc(void)
+{
+ struct circ_buf *cb;
+ cb = kmalloc(sizeof(struct circ_buf), GFP_KERNEL);
+ if (cb == NULL)
+ return NULL;
+ cb->buf = kmalloc(AIRCABLE_BUF_SIZE, GFP_KERNEL);
+ if (cb->buf == NULL) {
+ kfree(cb);
+ return NULL;
+ }
+ serial_buf_clear(cb);
+ return cb;
+}
+
+/*
+ * serial_buf_free
+ *
+ * Free the buffer and all associated memory.
+ */
+static void serial_buf_free(struct circ_buf *cb)
+{
+ kfree(cb->buf);
+ kfree(cb);
+}
+
+/*
+ * serial_buf_data_avail
+ *
+ * Return the number of bytes of data available in the circular
+ * buffer.
+ */
+static int serial_buf_data_avail(struct circ_buf *cb)
+{
+ return CIRC_CNT(cb->head,cb->tail,AIRCABLE_BUF_SIZE);
+}
+
+/*
+ * serial_buf_put
+ *
+ * Copy data data from a user buffer and put it into the circular buffer.
+ * Restrict to the amount of space available.
+ *
+ * Return the number of bytes copied.
+ */
+static int serial_buf_put(struct circ_buf *cb, const char *buf, int count)
+{
+ int c, ret = 0;
+ while (1) {
+ c = CIRC_SPACE_TO_END(cb->head, cb->tail, AIRCABLE_BUF_SIZE);
+ if (count < c)
+ c = count;
+ if (c <= 0)
+ break;
+ memcpy(cb->buf + cb->head, buf, c);
+ cb->head = (cb->head + c) & (AIRCABLE_BUF_SIZE-1);
+ buf += c;
+ count -= c;
+ ret= c;
+ }
+ return ret;
+}
+
+/*
+ * serial_buf_get
+ *
+ * Get data from the circular buffer and copy to the given buffer.
+ * Restrict to the amount of data available.
+ *
+ * Return the number of bytes copied.
+ */
+static int serial_buf_get(struct circ_buf *cb, char *buf, int count)
+{
+ int c, ret = 0;
+ while (1) {
+ c = CIRC_CNT_TO_END(cb->head, cb->tail, AIRCABLE_BUF_SIZE);
+ if (count < c)
+ c = count;
+ if (c <= 0)
+ break;
+ memcpy(buf, cb->buf + cb->tail, c);
+ cb->tail = (cb->tail + c) & (AIRCABLE_BUF_SIZE-1);
+ buf += c;
+ count -= c;
+ ret= c;
+ }
+ return ret;
+}
+
+/* End of circula buffer methods */
+
+static void aircable_send(struct usb_serial_port *port)
+{
+ int count, result;
+ struct aircable_private *priv = usb_get_serial_port_data(port);
+ unsigned char* buf;
+ dbg("%s - port %d", __FUNCTION__, port->number);
+ if (port->write_urb_busy)
+ return;
+
+ count = min(serial_buf_data_avail(priv->tx_buf), MAX_HCI_FRAMESIZE);
+ if (count == 0)
+ return;
+
+ buf = kzalloc(count + HCI_HEADER_LENGTH, GFP_ATOMIC);
+ if (!buf) {
+ err("%s- kzalloc(%Zd) failed.", __FUNCTION__,
+ count + HCI_HEADER_LENGTH);
+ return;
+ }
+
+ buf[0] = TX_HEADER_0;
+ buf[1] = TX_HEADER_1;
+ buf[2] = (unsigned char)count;
+ buf[3] = (unsigned char)(count >> 8);
+ serial_buf_get(priv->tx_buf,buf + HCI_HEADER_LENGTH, MAX_HCI_FRAMESIZE);
+
+ memcpy(port->write_urb->transfer_buffer, buf,
+ count + HCI_HEADER_LENGTH);
+
+ kfree(buf);
+ port->write_urb_busy = 1;
+ usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
+ count + HCI_HEADER_LENGTH,
+ port->write_urb->transfer_buffer);
+ port->write_urb->transfer_buffer_length = count + HCI_HEADER_LENGTH;
+ port->write_urb->dev = port->serial->dev;
+ result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+
+ if (result) {
+ dev_err(&port->dev,
+ "%s - failed submitting write urb, error %d\n",
+ __FUNCTION__, result);
+ port->write_urb_busy = 0;
+ }
+
+ schedule_work(&port->work);
+}
+
+static void aircable_read(void *params)
+{
+ struct usb_serial_port *port = params;
+ struct aircable_private *priv = usb_get_serial_port_data(port);
+ struct tty_struct *tty;
+ unsigned char *data;
+ int count;
+ if (priv->rx_flags & THROTTLED){
+ if (priv->rx_flags & ACTUALLY_THROTTLED)
+ schedule_work(&priv->rx_work);
+ return;
+ }
+
+ /* By now I will flush data to the tty in packages of no more than
+ * 64 bytes, to ensure I do not get throttled.
+ * Ask USB mailing list for better aproach.
+ */
+ tty = port->tty;
+
+ if (!tty)
+ schedule_work(&priv->rx_work);
+
+ count = min(64, serial_buf_data_avail(priv->rx_buf));
+
+ if (count <= 0)
+ return; //We have finished sending everything.
+
+ tty_prepare_flip_string(tty, &data, count);
+ if (!data){
+ err("%s- kzalloc(%Zd) failed.", __FUNCTION__, count);
+ return;
+ }
+
+ serial_buf_get(priv->rx_buf, data, count);
+
+ tty_flip_buffer_push(tty);
+
+ if (serial_buf_data_avail(priv->rx_buf))
+ schedule_work(&priv->rx_work);
+
+ return;
+}
+/* End of private methods */
+
+static int aircable_probe(struct usb_serial *serial,
+ const struct usb_device_id *id)
+{
+ struct usb_host_interface *iface_desc = serial->interface->cur_altsetting;
+ struct usb_endpoint_descriptor *endpoint;
+ int num_bulk_out=0;
+ int i;
+
+ for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
+ endpoint = &iface_desc->endpoint[i].desc;
+ if (((endpoint->bEndpointAddress & 0x80) == 0x00) &&
+ ((endpoint->bmAttributes & 3) == 0x02)) {
+ /* we found our bulk out endpoint */
+ dbg("found bulk out on endpoint %d", i);
+ ++num_bulk_out;
+ }
+ }
+
+ if (num_bulk_out == 0) {
+ dbg("Invalid interface, discarding");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int aircable_attach (struct usb_serial *serial)
+{
+ struct usb_serial_port *port = serial->port[0];
+ struct aircable_private *priv;
+
+ priv = kzalloc(sizeof(struct aircable_private), GFP_KERNEL);
+ if (!priv){
+ err("%s- kmalloc(%Zd) failed.", __FUNCTION__,
+ sizeof(struct aircable_private));
+ return -ENOMEM;
+ }
+
+ /* Allocation of Circular Buffers */
+ priv->tx_buf = serial_buf_alloc();
+ if (priv->tx_buf == NULL) {
+ kfree(priv);
+ return -ENOMEM;
+ }
+
+ priv->rx_buf = serial_buf_alloc();
+ if (priv->rx_buf == NULL) {
+ kfree(priv->tx_buf);
+ kfree(priv);
+ return -ENOMEM;
+ }
+
+ priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
+ INIT_WORK(&priv->rx_work, aircable_read, port);
+
+ usb_set_serial_port_data(serial->port[0], priv);
+
+ return 0;
+}
+
+static void aircable_shutdown(struct usb_serial *serial)
+{
+
+ struct usb_serial_port *port = serial->port[0];
+ struct aircable_private *priv = usb_get_serial_port_data(port);
+
+ dbg("%s", __FUNCTION__);
+
+ if (priv) {
+ serial_buf_free(priv->tx_buf);
+ serial_buf_free(priv->rx_buf);
+ usb_set_serial_port_data(port, NULL);
+ kfree(priv);
+ }
+}
+
+static int aircable_write_room(struct usb_serial_port *port)
+{
+ struct aircable_private *priv = usb_get_serial_port_data(port);
+ return serial_buf_data_avail(priv->tx_buf);
+}
+
+static int aircable_write(struct usb_serial_port *port,
+ const unsigned char *source, int count)
+{
+ struct aircable_private *priv = usb_get_serial_port_data(port);
+ int temp;
+
+ dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count);
+
+ usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, source);
+
+ if (!count){
+ dbg("%s - write request of 0 bytes", __FUNCTION__);
+ return count;
+ }
+
+ temp = serial_buf_put(priv->tx_buf, source, count);
+
+ aircable_send(port);
+
+ if (count > AIRCABLE_BUF_SIZE)
+ count = AIRCABLE_BUF_SIZE;
+
+ return count;
+
+}
+
+static void aircable_write_bulk_callback(struct urb *urb, struct pt_regs *regs)
+{
+ struct usb_serial_port *port = urb->context;
+ int result;
+
+ dbg("%s - urb->status: %d", __FUNCTION__ , urb->status);
+
+ /* This has been taken from cypress_m8.c cypress_write_int_callback */
+ switch (urb->status) {
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dbg("%s - urb shutting down with status: %d",
+ __FUNCTION__, urb->status);
+ port->write_urb_busy = 0;
+ return;
+ default:
+ /* error in the urb, so we have to resubmit it */
+ dbg("%s - Overflow in write", __FUNCTION__);
+ dbg("%s - nonzero write bulk status received: %d",
+ __FUNCTION__, urb->status);
+ port->write_urb->transfer_buffer_length = 1;
+ port->write_urb->dev = port->serial->dev;
+ result = usb_submit_urb(port->write_urb, GFP_KERNEL);
+ if (result)
+ dev_err(&urb->dev->dev,
+ "%s - failed resubmitting write urb, error %d\n",
+ __FUNCTION__, result);
+ else
+ return;
+ }
+
+ port->write_urb_busy = 0;
+
+ aircable_send(port);
+}
+
+static void aircable_read_bulk_callback(struct urb *urb, struct pt_regs *regs)
+{
+ struct usb_serial_port *port = urb->context;
+ struct aircable_private *priv = usb_get_serial_port_data(port);
+ struct tty_struct *tty;
+ unsigned long no_packages, remaining, package_length, i;
+ int result, shift = 0;
+ unsigned char *temp;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if (urb->status) {
+ dbg("%s - urb->status = %d", __FUNCTION__, urb->status);
+ if (!port->open_count) {
+ dbg("%s - port is closed, exiting.", __FUNCTION__);
+ return;
+ }
+ if (urb->status == -EPROTO) {
+ dbg("%s - caught -EPROTO, resubmitting the urb",
+ __FUNCTION__);
+ usb_fill_bulk_urb(port->read_urb, port->serial->dev,
+ usb_rcvbulkpipe(port->serial->dev,
+ port->bulk_in_endpointAddress),
+ port->read_urb->transfer_buffer,
+ port->read_urb->transfer_buffer_length,
+ aircable_read_bulk_callback, port);
+
+ result = usb_submit_urb(urb, GFP_ATOMIC);
+ if (result)
+ dev_err(&urb->dev->dev,
+ "%s - failed resubmitting read urb, error %d\n",
+ __FUNCTION__, result);
+ return;
+ }
+ dbg("%s - unable to handle the error, exiting.", __FUNCTION__);
+ return;
+ }
+
+ usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
+ urb->actual_length,urb->transfer_buffer);
+
+ tty = port->tty;
+ if (tty && urb->actual_length) {
+ if (urb->actual_length <= 2) {
+ /* This is an incomplete package */
+ serial_buf_put(priv->rx_buf, urb->transfer_buffer,
+ urb->actual_length);
+ } else {
+ temp = urb->transfer_buffer;
+ if (temp[0] == RX_HEADER_0)
+ shift = HCI_HEADER_LENGTH;
+
+ remaining = urb->actual_length;
+ no_packages = urb->actual_length / (HCI_COMPLETE_FRAME);
+
+ if (urb->actual_length % HCI_COMPLETE_FRAME != 0)
+ no_packages+=1;
+
+ for (i = 0; i < no_packages ;i++) {
+ if (remaining > (HCI_COMPLETE_FRAME))
+ package_length = HCI_COMPLETE_FRAME;
+ else
+ package_length = remaining;
+ remaining -= package_length;
+
+ serial_buf_put(priv->rx_buf,
+ urb->transfer_buffer + shift +
+ (HCI_COMPLETE_FRAME) * (i),
+ package_length - shift);
+ }
+ }
+ aircable_read(port);
+ }
+
+ /* Schedule the next read _if_ we are still open */
+ if (port->open_count) {
+ usb_fill_bulk_urb(port->read_urb, port->serial->dev,
+ usb_rcvbulkpipe(port->serial->dev,
+ port->bulk_in_endpointAddress),
+ port->read_urb->transfer_buffer,
+ port->read_urb->transfer_buffer_length,
+ aircable_read_bulk_callback, port);
+
+ result = usb_submit_urb(urb, GFP_ATOMIC);
+ if (result)
+ dev_err(&urb->dev->dev,
+ "%s - failed resubmitting read urb, error %d\n",
+ __FUNCTION__, result);
+ }
+
+ return;
+}
+
+/* Based on ftdi_sio.c throttle */
+static void aircable_throttle(struct usb_serial_port *port)
+{
+ struct aircable_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ spin_lock_irqsave(&priv->rx_lock, flags);
+ priv->rx_flags |= THROTTLED;
+ spin_unlock_irqrestore(&priv->rx_lock, flags);
+}
+
+/* Based on ftdi_sio.c unthrottle */
+static void aircable_unthrottle(struct usb_serial_port *port)
+{
+ struct aircable_private *priv = usb_get_serial_port_data(port);
+ int actually_throttled;
+ unsigned long flags;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ spin_lock_irqsave(&priv->rx_lock, flags);
+ actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
+ priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
+ spin_unlock_irqrestore(&priv->rx_lock, flags);
+
+ if (actually_throttled)
+ schedule_work(&priv->rx_work);
+}
+
+static struct usb_serial_driver aircable_device = {
+ .description = "aircable",
+ .id_table = id_table,
+ .num_ports = 1,
+ .attach = aircable_attach,
+ .probe = aircable_probe,
+ .shutdown = aircable_shutdown,
+ .write = aircable_write,
+ .write_room = aircable_write_room,
+ .write_bulk_callback = aircable_write_bulk_callback,
+ .read_bulk_callback = aircable_read_bulk_callback,
+ .throttle = aircable_throttle,
+ .unthrottle = aircable_unthrottle,
+};
+
+static struct usb_driver aircable_driver = {
+ .name = "aircable",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table,
+};
+
+static int __init aircable_init (void)
+{
+ int retval;
+ retval = usb_serial_register(&aircable_device);
+ if (retval)
+ goto failed_serial_register;
+ retval = usb_register(&aircable_driver);
+ if (retval)
+ goto failed_usb_register;
+ return 0;
+
+failed_serial_register:
+ usb_serial_deregister(&aircable_device);
+failed_usb_register:
+ return retval;
+}
+
+static void __exit aircable_exit (void)
+{
+ usb_deregister(&aircable_driver);
+ usb_serial_deregister(&aircable_device);
+}
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+
+module_init(aircable_init);
+module_exit(aircable_exit);
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
projects / linux-2.6-omap-h63xx.git / commitdiff