]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
cxgb3: sge setup fixes
authorDivy Le Ray <divy@chelsio.com>
Thu, 26 Mar 2009 16:39:14 +0000 (16:39 +0000)
committerDavid S. Miller <davem@davemloft.net>
Fri, 27 Mar 2009 07:46:57 +0000 (00:46 -0700)
Enable timestamps, update delayed ack threshold for iSCSI/iWARP traffic
Remove the len flag in Tx requests. It might corrupt offload trace packets.
Update SGE context setup to avoid potential H/W misprogrammation.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/cxgb3/sge.c
drivers/net/cxgb3/t3_hw.c [changed mode: 0644->0755]

index fcd1a4f4f778254b987fb236c105422f0783b882..54667f0dde94c77f01ce6ebf7ab9c731ec68e703 100755 (executable)
@@ -1089,7 +1089,7 @@ static void write_tx_pkt_wr(struct adapter *adap, struct sk_buff *skb,
        struct tx_desc *d = &q->desc[pidx];
        struct cpl_tx_pkt *cpl = (struct cpl_tx_pkt *)d;
 
-       cpl->len = htonl(skb->len | 0x80000000);
+       cpl->len = htonl(skb->len);
        cntrl = V_TXPKT_INTF(pi->port_id);
 
        if (vlan_tx_tag_present(skb) && pi->vlan_grp)
old mode 100644 (file)
new mode 100755 (executable)
index ff262a0..7d8fbae
@@ -2128,16 +2128,40 @@ void t3_port_intr_clear(struct adapter *adapter, int idx)
 static int t3_sge_write_context(struct adapter *adapter, unsigned int id,
                                unsigned int type)
 {
-       t3_write_reg(adapter, A_SG_CONTEXT_MASK0, 0xffffffff);
-       t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0xffffffff);
-       t3_write_reg(adapter, A_SG_CONTEXT_MASK2, 0xffffffff);
-       t3_write_reg(adapter, A_SG_CONTEXT_MASK3, 0xffffffff);
+       if (type == F_RESPONSEQ) {
+               /*
+                * Can't write the Response Queue Context bits for
+                * Interrupt Armed or the Reserve bits after the chip
+                * has been initialized out of reset.  Writing to these
+                * bits can confuse the hardware.
+                */
+               t3_write_reg(adapter, A_SG_CONTEXT_MASK0, 0xffffffff);
+               t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0xffffffff);
+               t3_write_reg(adapter, A_SG_CONTEXT_MASK2, 0x17ffffff);
+               t3_write_reg(adapter, A_SG_CONTEXT_MASK3, 0xffffffff);
+       } else {
+               t3_write_reg(adapter, A_SG_CONTEXT_MASK0, 0xffffffff);
+               t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0xffffffff);
+               t3_write_reg(adapter, A_SG_CONTEXT_MASK2, 0xffffffff);
+               t3_write_reg(adapter, A_SG_CONTEXT_MASK3, 0xffffffff);
+       }
        t3_write_reg(adapter, A_SG_CONTEXT_CMD,
                     V_CONTEXT_CMD_OPCODE(1) | type | V_CONTEXT(id));
        return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY,
                               0, SG_CONTEXT_CMD_ATTEMPTS, 1);
 }
 
+/**
+ *     clear_sge_ctxt - completely clear an SGE context
+ *     @adapter: the adapter
+ *     @id: the context id
+ *     @type: the context type
+ *
+ *     Completely clear an SGE context.  Used predominantly at post-reset
+ *     initialization.  Note in particular that we don't skip writing to any
+ *     "sensitive bits" in the contexts the way that t3_sge_write_context()
+ *     does ...
+ */
 static int clear_sge_ctxt(struct adapter *adap, unsigned int id,
                          unsigned int type)
 {
@@ -2145,7 +2169,14 @@ static int clear_sge_ctxt(struct adapter *adap, unsigned int id,
        t3_write_reg(adap, A_SG_CONTEXT_DATA1, 0);
        t3_write_reg(adap, A_SG_CONTEXT_DATA2, 0);
        t3_write_reg(adap, A_SG_CONTEXT_DATA3, 0);
-       return t3_sge_write_context(adap, id, type);
+       t3_write_reg(adap, A_SG_CONTEXT_MASK0, 0xffffffff);
+       t3_write_reg(adap, A_SG_CONTEXT_MASK1, 0xffffffff);
+       t3_write_reg(adap, A_SG_CONTEXT_MASK2, 0xffffffff);
+       t3_write_reg(adap, A_SG_CONTEXT_MASK3, 0xffffffff);
+       t3_write_reg(adap, A_SG_CONTEXT_CMD,
+                    V_CONTEXT_CMD_OPCODE(1) | type | V_CONTEXT(id));
+       return t3_wait_op_done(adap, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY,
+                              0, SG_CONTEXT_CMD_ATTEMPTS, 1);
 }
 
 /**
@@ -2729,10 +2760,10 @@ static void tp_config(struct adapter *adap, const struct tp_params *p)
                     F_TCPCHECKSUMOFFLOAD | V_IPTTL(64));
        t3_write_reg(adap, A_TP_TCP_OPTIONS, V_MTUDEFAULT(576) |
                     F_MTUENABLE | V_WINDOWSCALEMODE(1) |
-                    V_TIMESTAMPSMODE(0) | V_SACKMODE(1) | V_SACKRX(1));
+                    V_TIMESTAMPSMODE(1) | V_SACKMODE(1) | V_SACKRX(1));
        t3_write_reg(adap, A_TP_DACK_CONFIG, V_AUTOSTATE3(1) |
                     V_AUTOSTATE2(1) | V_AUTOSTATE1(0) |
-                    V_BYTETHRESHOLD(16384) | V_MSSTHRESHOLD(2) |
+                    V_BYTETHRESHOLD(26880) | V_MSSTHRESHOLD(2) |
                     F_AUTOCAREFUL | F_AUTOENABLE | V_DACK_MODE(1));
        t3_set_reg_field(adap, A_TP_IN_CONFIG, F_RXFBARBPRIO | F_TXFBARBPRIO,
                         F_IPV6ENABLE | F_NICMODE);