HDQ driver:protect the shared flag

This patch moves the shared variable into the local structure and
protects its updation.

Signed-off-by: Madhusudhan Chikkature <madhu.cr@ti.com>
Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index 85ce7ec981d01eef33198a91b1e91f98cdc15a74..34129e7066e20cc28ca18bbd0d182df31be9f5a5 100644 (file)
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -61,6 +61,12 @@ struct hdq_data {
        struct  clk             *hdq_fck;
        u8                      hdq_irqstatus;
        spinlock_t              hdq_spinlock;
+       /*
+        * Used to control the call to omap_hdq_get and omap_hdq_put.
+        * HDQ Protocol: Write the CMD|REG_address first, followed by
+        * the data wrire or read.
+        */
+       int                     init_trans;
 };
 
 static int omap_hdq_get(struct hdq_data *hdq_data);
@@ -504,13 +510,6 @@ omap_hdq_put(struct hdq_data *hdq_data)
        return ret;
 }
 
-/*
- * Used to control the call to omap_hdq_get and omap_hdq_put.
- * HDQ Protocol: Write the CMD|REG_address first, followed by
- * the data wrire or read.
- */
-static int init_trans;
-
 /*
  * Read a byte of data from the device.
  */
@@ -522,14 +521,26 @@ static u8 omap_w1_read_byte(void *_hdq)
 
        ret = hdq_read_byte(hdq_data, &val);
        if (ret) {
-               init_trans = 0;
+               ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+               if (ret < 0) {
+                       dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+                       return -EINTR;
+               }
+               hdq_data->init_trans = 0;
+               mutex_unlock(&hdq_data->hdq_mutex);
                omap_hdq_put(hdq_data);
                return -1;
        }
 
        /* Write followed by a read, release the module */
-       if (init_trans) {
-               init_trans = 0;
+       if (hdq_data->init_trans) {
+               ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+               if (ret < 0) {
+                       dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+                       return -EINTR;
+               }
+               hdq_data->init_trans = 0;
+               mutex_unlock(&hdq_data->hdq_mutex);
                omap_hdq_put(hdq_data);
        }
 
@@ -542,21 +553,34 @@ static u8 omap_w1_read_byte(void *_hdq)
 static void omap_w1_write_byte(void *_hdq, u8 byte)
 {
        struct hdq_data *hdq_data = _hdq;
+       int ret;
        u8 status;
 
        /* First write to initialize the transfer */
-       if (init_trans == 0)
+       if (hdq_data->init_trans == 0)
                omap_hdq_get(hdq_data);
 
-       init_trans++;
+       ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+       if (ret < 0) {
+               dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+               return;
+       }
+       hdq_data->init_trans++;
+       mutex_unlock(&hdq_data->hdq_mutex);
 
        hdq_write_byte(hdq_data, byte, &status);
        dev_dbg(hdq_data->dev, "Ctrl status %x\n", status);
 
        /* Second write, data transfered. Release the module */
-       if (init_trans > 1) {
+       if (hdq_data->init_trans > 1) {
                omap_hdq_put(hdq_data);
-               init_trans = 0;
+               ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+               if (ret < 0) {
+                       dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+                       return;
+               }
+               hdq_data->init_trans = 0;
+               mutex_unlock(&hdq_data->hdq_mutex);
        }
 
        return;