b43legacy: fix TBTT and PU timings

This fixes some timings for pre-TBTT and synthetic PU.
The patch by Michael Buesch has been ported to b43legacy.

Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/b43legacy/b43legacy.h b/drivers/net/wireless/b43legacy/b43legacy.h
index 242b8ad4e33c88f22f7a175fa61f6c72546080f1..ded3cd31b3df40bceac4a5208414eb8cc12f55ea 100644 (file)
--- a/drivers/net/wireless/b43legacy/b43legacy.h
+++ b/drivers/net/wireless/b43legacy/b43legacy.h
@@ -97,6 +97,7 @@
 #define B43legacy_MMIO_RADIO_HWENABLED_LO      0x49A
 #define B43legacy_MMIO_GPIO_CONTROL    0x49C
 #define B43legacy_MMIO_GPIO_MASK               0x49E
+#define B43legacy_MMIO_TSF_CFP_PRETBTT 0x612
 #define B43legacy_MMIO_TSF_0           0x632 /* core rev < 3 only */
 #define B43legacy_MMIO_TSF_1           0x634 /* core rev < 3 only */
 #define B43legacy_MMIO_TSF_2           0x636 /* core rev < 3 only */
@@ -149,6 +150,8 @@
 #define B43legacy_SHM_SH_UCODEPATCH    0x0002 /* Microcode patchlevel */
 #define B43legacy_SHM_SH_UCODEDATE     0x0004 /* Microcode date */
 #define B43legacy_SHM_SH_UCODETIME     0x0006 /* Microcode time */
+#define B43legacy_SHM_SH_SPUWKUP       0x0094 /* pre-wakeup for synth PU in us */
+#define B43legacy_SHM_SH_PRETBTT       0x0096 /* pre-TBTT in us */
 
 #define B43legacy_UCODEFLAGS_OFFSET     0x005E
 

diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index f518e796bdecd5eace6293a570433dc27a90a604..2422a5dab1d2b89cdd891b5f283bf988c80934c6 100644 (file)
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -3005,6 +3005,34 @@ static void b43legacy_set_retry_limits(struct b43legacy_wldev *dev,
        b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS, 0x0007, long_retry);
 }
 
+static void b43legacy_set_synth_pu_delay(struct b43legacy_wldev *dev,
+                                         bool idle) {
+       u16 pu_delay = 1050;
+
+       if (b43legacy_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS) || idle)
+               pu_delay = 500;
+       if ((dev->phy.radio_ver == 0x2050) && (dev->phy.radio_rev == 8))
+               pu_delay = max(pu_delay, (u16)2400);
+
+       b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
+                             B43legacy_SHM_SH_SPUWKUP, pu_delay);
+}
+
+/* Set the TSF CFP pre-TargetBeaconTransmissionTime. */
+static void b43legacy_set_pretbtt(struct b43legacy_wldev *dev)
+{
+       u16 pretbtt;
+
+       /* The time value is in microseconds. */
+       if (b43legacy_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS))
+               pretbtt = 2;
+       else
+               pretbtt = 250;
+       b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
+                             B43legacy_SHM_SH_PRETBTT, pretbtt);
+       b43legacy_write16(dev, B43legacy_MMIO_TSF_CFP_PRETBTT, pretbtt);
+}
+
 /* Shutdown a wireless core */
 /* Locking: wl->mutex */
 static void b43legacy_wireless_core_exit(struct b43legacy_wldev *dev)
@@ -3191,9 +3219,7 @@ static int b43legacy_wireless_core_init(struct b43legacy_wldev *dev)
        if (err)
                goto err_chip_exit;
 
-       b43legacy_write16(dev, 0x0612, 0x0050);
-       b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, 0x0416, 0x0050);
-       b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, 0x0414, 0x01F4);
+       b43legacy_set_synth_pu_delay(dev, 1);
 
        ssb_bus_powerup(bus, 1); /* Enable dynamic PCTL */
        b43legacy_upload_card_macaddress(dev);
@@ -3249,6 +3275,8 @@ static int b43legacy_op_add_interface(struct ieee80211_hw *hw,
 
        spin_lock_irqsave(&wl->irq_lock, flags);
        b43legacy_adjust_opmode(dev);
+       b43legacy_set_pretbtt(dev);
+       b43legacy_set_synth_pu_delay(dev, 0);
        b43legacy_upload_card_macaddress(dev);
        spin_unlock_irqrestore(&wl->irq_lock, flags);