[POWERPC] 4xx: Fix L1 cache size in katmai DTS

This patch changes the katmai (440SPe) L1 cache size to 32k. Some
whitespace issues are cleaned up too.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>

diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts
index bc32ac7250ec5448b4aacc09aec1d78b911e4be0..fc86e5a3afc47ebd16be1b2fc7115721d6d2f79e 100644 (file)
--- a/arch/powerpc/boot/dts/katmai.dts
+++ b/arch/powerpc/boot/dts/katmai.dts
@@ -38,8 +38,8 @@
                        timebase-frequency = <0>; /* Filled in by zImage */
                        i-cache-line-size = <20>;
                        d-cache-line-size = <20>;
-                       i-cache-size = <20000>;
-                       d-cache-size = <20000>;
+                       i-cache-size = <8000>;
+                       d-cache-size = <8000>;
                        dcr-controller;
                        dcr-access-method = "native";
                };
@@ -136,11 +136,11 @@
                };
 
                POB0: opb {
-                       compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
+                       compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
                        #address-cells = <1>;
                        #size-cells = <1>;
-                       ranges = <00000000 4 e0000000 20000000>;
-                       clock-frequency = <0>; /* Filled in by zImage */
+                       ranges = <00000000 4 e0000000 20000000>;
+                       clock-frequency = <0>; /* Filled in by zImage */
 
                        EBC0: ebc {
                                compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
@@ -153,38 +153,38 @@
                        };
 
                        UART0: serial@10000200 {
-                               device_type = "serial";
-                               compatible = "ns16550";
-                               reg = <10000200 8>;
+                               device_type = "serial";
+                               compatible = "ns16550";
+                               reg = <10000200 8>;
                                virtual-reg = <a0000200>;
-                               clock-frequency = <0>; /* Filled in by zImage */
-                               current-speed = <1c200>;
-                               interrupt-parent = <&UIC0>;
-                               interrupts = <0 4>;
-                       };
+                               clock-frequency = <0>; /* Filled in by zImage */
+                               current-speed = <1c200>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <0 4>;
+                       };
 
                        UART1: serial@10000300 {
-                               device_type = "serial";
-                               compatible = "ns16550";
-                               reg = <10000300 8>;
+                               device_type = "serial";
+                               compatible = "ns16550";
+                               reg = <10000300 8>;
                                virtual-reg = <a0000300>;
-                               clock-frequency = <0>;
-                               current-speed = <0>;
-                               interrupt-parent = <&UIC0>;
-                               interrupts = <1 4>;
-                       };
+                               clock-frequency = <0>;
+                               current-speed = <0>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <1 4>;
+                       };
 
 
                        UART2: serial@10000600 {
-                               device_type = "serial";
-                               compatible = "ns16550";
-                               reg = <10000600 8>;
+                               device_type = "serial";
+                               compatible = "ns16550";
+                               reg = <10000600 8>;
                                virtual-reg = <a0000600>;
-                               clock-frequency = <0>;
-                               current-speed = <0>;
-                               interrupt-parent = <&UIC1>;
-                               interrupts = <5 4>;
-                       };
+                               clock-frequency = <0>;
+                               current-speed = <0>;
+                               interrupt-parent = <&UIC1>;
+                               interrupts = <5 4>;
+                       };
 
                        IIC0: i2c@10000400 {
                                compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";