/*P:100 This is the Launcher code, a simple program which lays out the
* "physical" memory for the new Guest by mapping the kernel image and the
* virtual devices, then reads repeatedly from /dev/lguest to run the Guest.
- *
- * The only trick: the Makefile links it at a high address so it will be clear
- * of the guest memory region. It means that each Guest cannot have more than
- * about 2.5G of memory on a normally configured Host. :*/
+:*/
#define _LARGEFILE64_SOURCE
#define _GNU_SOURCE
#include <stdio.h>
#ifndef SIOCBRADDIF
#define SIOCBRADDIF 0x89a2 /* add interface to bridge */
#endif
+/* We can have up to 256 pages for devices. */
+#define DEVICE_PAGES 256
/*L:120 verbose is both a global flag and a macro. The C preprocessor allows
* this, and although I wouldn't recommend it, it works quite nicely here. */
/* The pipe to send commands to the waker process */
static int waker_fd;
-/* The top of guest physical memory. */
-static u32 top;
+/* The pointer to the start of guest memory. */
+static void *guest_base;
+/* The maximum guest physical address allowed, and maximum possible. */
+static unsigned long guest_limit, guest_max;
/* This is our list of devices. */
struct device_list
void *priv;
};
+/*L:100 The Launcher code itself takes us out into userspace, that scary place
+ * where pointers run wild and free! Unfortunately, like most userspace
+ * programs, it's quite boring (which is why everyone likes to hack on the
+ * kernel!). Perhaps if you make up an Lguest Drinking Game at this point, it
+ * will get you through this section. Or, maybe not.
+ *
+ * The Launcher sets up a big chunk of memory to be the Guest's "physical"
+ * memory and stores it in "guest_base". In other words, Guest physical ==
+ * Launcher virtual with an offset.
+ *
+ * This can be tough to get your head around, but usually it just means that we
+ * use these trivial conversion functions when the Guest gives us it's
+ * "physical" addresses: */
+static void *from_guest_phys(unsigned long addr)
+{
+ return guest_base + addr;
+}
+
+static unsigned long to_guest_phys(const void *addr)
+{
+ return (addr - guest_base);
+}
+
/*L:130
* Loading the Kernel.
*
return fd;
}
-/* map_zeroed_pages() takes a (page-aligned) address and a number of pages. */
-static void *map_zeroed_pages(unsigned long addr, unsigned int num)
+/* map_zeroed_pages() takes a number of pages. */
+static void *map_zeroed_pages(unsigned int num)
{
- /* We cache the /dev/zero file-descriptor so we only open it once. */
- static int fd = -1;
-
- if (fd == -1)
- fd = open_or_die("/dev/zero", O_RDONLY);
+ int fd = open_or_die("/dev/zero", O_RDONLY);
+ void *addr;
/* We use a private mapping (ie. if we write to the page, it will be
- * copied), and obviously we insist that it be mapped where we ask. */
- if (mmap((void *)addr, getpagesize() * num,
- PROT_READ|PROT_WRITE|PROT_EXEC, MAP_FIXED|MAP_PRIVATE, fd, 0)
- != (void *)addr)
- err(1, "Mmaping %u pages of /dev/zero @%p", num, (void *)addr);
-
- /* Returning the address is just a courtesy: can simplify callers. */
- return (void *)addr;
+ * copied). */
+ addr = mmap(NULL, getpagesize() * num,
+ PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, fd, 0);
+ if (addr == MAP_FAILED)
+ err(1, "Mmaping %u pages of /dev/zero", num);
+
+ return addr;
+}
+
+/* Get some more pages for a device. */
+static void *get_pages(unsigned int num)
+{
+ void *addr = from_guest_phys(guest_limit);
+
+ guest_limit += num * getpagesize();
+ if (guest_limit > guest_max)
+ errx(1, "Not enough memory for devices");
+ return addr;
}
/* To find out where to start we look for the magic Guest string, which marks
* the code we see in lguest_asm.S. This is a hack which we are currently
* plotting to replace with the normal Linux entry point. */
-static unsigned long entry_point(void *start, void *end,
+static unsigned long entry_point(const void *start, const void *end,
unsigned long page_offset)
{
- void *p;
+ const void *p;
/* The scan gives us the physical starting address. We want the
* virtual address in this case, and fortunately, we already figured
* "page_offset". */
for (p = start; p < end; p++)
if (memcmp(p, "GenuineLguest", strlen("GenuineLguest")) == 0)
- return (long)p + strlen("GenuineLguest") + page_offset;
+ return to_guest_phys(p + strlen("GenuineLguest"))
+ + page_offset;
errx(1, "Is this image a genuine lguest?");
}
static unsigned long map_elf(int elf_fd, const Elf32_Ehdr *ehdr,
unsigned long *page_offset)
{
+ void *start = (void *)-1, *end = NULL;
Elf32_Phdr phdr[ehdr->e_phnum];
unsigned int i;
- unsigned long start = -1UL, end = 0;
/* Sanity checks on the main ELF header: an x86 executable with a
* reasonable number of correctly-sized program headers. */
/* We track the first and last address we mapped, so we can
* tell entry_point() where to scan. */
- if (phdr[i].p_paddr < start)
- start = phdr[i].p_paddr;
- if (phdr[i].p_paddr + phdr[i].p_filesz > end)
- end = phdr[i].p_paddr + phdr[i].p_filesz;
+ if (from_guest_phys(phdr[i].p_paddr) < start)
+ start = from_guest_phys(phdr[i].p_paddr);
+ if (from_guest_phys(phdr[i].p_paddr) + phdr[i].p_filesz > end)
+ end=from_guest_phys(phdr[i].p_paddr)+phdr[i].p_filesz;
/* We map this section of the file at its physical address. */
- map_at(elf_fd, (void *)phdr[i].p_paddr,
+ map_at(elf_fd, from_guest_phys(phdr[i].p_paddr),
phdr[i].p_offset, phdr[i].p_filesz);
}
- return entry_point((void *)start, (void *)end, *page_offset);
+ return entry_point(start, end, *page_offset);
}
/*L:170 Prepare to be SHOCKED and AMAZED. And possibly a trifle nauseated.
* actually configurable as CONFIG_PHYSICAL_START, but as the comment
* there says, "Don't change this unless you know what you are doing".
* Indeed. */
- void *img = (void *)0x100000;
+ void *img = from_guest_phys(0x100000);
/* gzdopen takes our file descriptor (carefully placed at the start of
* the GZIP header we found) and returns a gzFile. */
/* We map the initrd at the top of memory, but mmap wants it to be
* page-aligned, so we round the size up for that. */
len = page_align(st.st_size);
- map_at(ifd, (void *)mem - len, 0, st.st_size);
+ map_at(ifd, from_guest_phys(mem - len), 0, st.st_size);
/* Once a file is mapped, you can close the file descriptor. It's a
* little odd, but quite useful. */
close(ifd);
return len;
}
-/* Once we know how much memory we have, and the address the Guest kernel
- * expects, we can construct simple linear page tables which will get the Guest
- * far enough into the boot to create its own.
+/* Once we know the address the Guest kernel expects, we can construct simple
+ * linear page tables for all of memory which will get the Guest far enough
+ * into the boot to create its own.
*
* We lay them out of the way, just below the initrd (which is why we need to
* know its size). */
linear_pages = (mapped_pages + ptes_per_page-1)/ptes_per_page;
/* We put the toplevel page directory page at the top of memory. */
- pgdir = (void *)mem - initrd_size - getpagesize();
+ pgdir = from_guest_phys(mem) - initrd_size - getpagesize();
/* Now we use the next linear_pages pages as pte pages */
linear = (void *)pgdir - linear_pages*getpagesize();
* continue from there. */
for (i = 0; i < mapped_pages; i += ptes_per_page) {
pgdir[(i + page_offset/getpagesize())/ptes_per_page]
- = (((u32)linear + i*sizeof(u32)) | PAGE_PRESENT);
+ = ((to_guest_phys(linear) + i*sizeof(u32))
+ | PAGE_PRESENT);
}
- verbose("Linear mapping of %u pages in %u pte pages at %p\n",
- mapped_pages, linear_pages, linear);
+ verbose("Linear mapping of %u pages in %u pte pages at %#lx\n",
+ mapped_pages, linear_pages, to_guest_phys(linear));
/* We return the top level (guest-physical) address: the kernel needs
* to know where it is. */
- return (unsigned long)pgdir;
+ return to_guest_phys(pgdir);
}
/* Simple routine to roll all the commandline arguments together with spaces
/* This is where we actually tell the kernel to initialize the Guest. We saw
* the arguments it expects when we looked at initialize() in lguest_user.c:
- * the top physical page to allow, the top level pagetable, the entry point and
- * the page_offset constant for the Guest. */
+ * the base of guest "physical" memory, the top physical page to allow, the
+ * top level pagetable, the entry point and the page_offset constant for the
+ * Guest. */
static int tell_kernel(u32 pgdir, u32 start, u32 page_offset)
{
u32 args[] = { LHREQ_INITIALIZE,
- top/getpagesize(), pgdir, start, page_offset };
+ (unsigned long)guest_base,
+ guest_limit / getpagesize(),
+ pgdir, start, page_offset };
int fd;
+ verbose("Guest: %p - %p (%#lx)\n",
+ guest_base, guest_base + guest_limit, guest_limit);
fd = open_or_die("/dev/lguest", O_RDWR);
if (write(fd, args, sizeof(args)) < 0)
err(1, "Writing to /dev/lguest");
{
/* We have to separately check addr and addr+size, because size could
* be huge and addr + size might wrap around. */
- if (addr >= top || addr + size >= top)
+ if (addr >= guest_limit || addr + size >= guest_limit)
errx(1, "%s:%i: Invalid address %li", __FILE__, line, addr);
/* We return a pointer for the caller's convenience, now we know it's
* safe to use. */
- return (void *)addr;
+ return from_guest_phys(addr);
}
/* A macro which transparently hands the line number to the real function. */
#define check_pointer(addr,size) _check_pointer(addr, size, __LINE__)
static u32 *get_dma_buffer(int fd, void *key,
struct iovec iov[], unsigned int *num, u32 *irq)
{
- u32 buf[] = { LHREQ_GETDMA, (u32)key };
+ u32 buf[] = { LHREQ_GETDMA, to_guest_phys(key) };
unsigned long udma;
u32 *res;
descs[i].features = features;
descs[i].num_pages = num_pages;
/* If they said the device needs memory, we allocate
- * that now, bumping up the top of Guest memory. */
+ * that now. */
if (num_pages) {
- map_zeroed_pages(top, num_pages);
- descs[i].pfn = top/getpagesize();
- top += num_pages*getpagesize();
+ unsigned long pa;
+ pa = to_guest_phys(get_pages(num_pages));
+ descs[i].pfn = pa / getpagesize();
}
return &descs[i];
}
if (handle_input)
set_fd(dev->fd, devices);
dev->desc = new_dev_desc(devices->descs, type, features, num_pages);
- dev->mem = (void *)(dev->desc->pfn * getpagesize());
+ dev->mem = from_guest_phys(dev->desc->pfn * getpagesize());
dev->handle_input = handle_input;
- dev->watch_key = (unsigned long)dev->mem + watch_off;
+ dev->watch_key = to_guest_phys(dev->mem) + watch_off;
dev->handle_output = handle_output;
return dev;
}
"<mem-in-mb> vmlinux [args...]");
}
-/*L:100 The Launcher code itself takes us out into userspace, that scary place
- * where pointers run wild and free! Unfortunately, like most userspace
- * programs, it's quite boring (which is why everyone like to hack on the
- * kernel!). Perhaps if you make up an Lguest Drinking Game at this point, it
- * will get you through this section. Or, maybe not.
- *
- * The Launcher binary sits up high, usually starting at address 0xB8000000.
- * Everything below this is the "physical" memory for the Guest. For example,
- * if the Guest were to write a "1" at physical address 0, we would see a "1"
- * in the Launcher at "(int *)0". Guest physical == Launcher virtual.
- *
- * This can be tough to get your head around, but usually it just means that we
- * don't need to do any conversion when the Guest gives us it's "physical"
- * addresses.
- */
+/*L:105 The main routine is where the real work begins: */
int main(int argc, char *argv[])
{
/* Memory, top-level pagetable, code startpoint, PAGE_OFFSET and size
int i, c, lguest_fd;
/* The list of Guest devices, based on command line arguments. */
struct device_list device_list;
- /* The boot information for the Guest: at guest-physical address 0. */
- void *boot = (void *)0;
+ /* The boot information for the Guest. */
+ void *boot;
/* If they specify an initrd file to load. */
const char *initrd_name = NULL;
* of memory now. */
for (i = 1; i < argc; i++) {
if (argv[i][0] != '-') {
- mem = top = atoi(argv[i]) * 1024 * 1024;
- device_list.descs = map_zeroed_pages(top, 1);
- top += getpagesize();
+ mem = atoi(argv[i]) * 1024 * 1024;
+ /* We start by mapping anonymous pages over all of
+ * guest-physical memory range. This fills it with 0,
+ * and ensures that the Guest won't be killed when it
+ * tries to access it. */
+ guest_base = map_zeroed_pages(mem / getpagesize()
+ + DEVICE_PAGES);
+ guest_limit = mem;
+ guest_max = mem + DEVICE_PAGES*getpagesize();
+ device_list.descs = get_pages(1);
break;
}
}
if (optind + 2 > argc)
usage();
+ verbose("Guest base is at %p\n", guest_base);
+
/* We always have a console device */
setup_console(&device_list);
- /* We start by mapping anonymous pages over all of guest-physical
- * memory range. This fills it with 0, and ensures that the Guest
- * won't be killed when it tries to access it. */
- map_zeroed_pages(0, mem / getpagesize());
-
/* Now we load the kernel */
start = load_kernel(open_or_die(argv[optind+1], O_RDONLY),
&page_offset);
+ /* Boot information is stashed at physical address 0 */
+ boot = from_guest_phys(0);
+
/* Map the initrd image if requested (at top of physical memory) */
if (initrd_name) {
initrd_size = load_initrd(initrd_name, mem);
= ((struct e820entry) { 0, mem, E820_RAM });
/* The boot header contains a command line pointer: we put the command
* line after the boot header (at address 4096) */
- *(void **)(boot + 0x228) = boot + 4096;
+ *(u32 *)(boot + 0x228) = 4096;
concat(boot + 4096, argv+optind+2);
/* The guest type value of "1" tells the Guest it's under lguest. */
* Dealing With Guest Memory.
*
* When the Guest gives us (what it thinks is) a physical address, we can use
- * the normal copy_from_user() & copy_to_user() on that address: remember,
- * Guest physical == Launcher virtual.
+ * the normal copy_from_user() & copy_to_user() on the corresponding place in
+ * the memory region allocated by the Launcher.
*
* But we can't trust the Guest: it might be trying to access the Launcher
* code. We have to check that the range is below the pfn_limit the Launcher
/* Don't let them access lguest binary. */
if (!lguest_address_ok(lg, addr, sizeof(val))
- || get_user(val, (u32 __user *)addr) != 0)
- kill_guest(lg, "bad read address %#lx", addr);
+ || get_user(val, (u32 *)(lg->mem_base + addr)) != 0)
+ kill_guest(lg, "bad read address %#lx: pfn_limit=%u membase=%p", addr, lg->pfn_limit, lg->mem_base);
return val;
}
void lgwrite_u32(struct lguest *lg, unsigned long addr, u32 val)
{
if (!lguest_address_ok(lg, addr, sizeof(val))
- || put_user(val, (u32 __user *)addr) != 0)
+ || put_user(val, (u32 *)(lg->mem_base + addr)) != 0)
kill_guest(lg, "bad write address %#lx", addr);
}
void lgread(struct lguest *lg, void *b, unsigned long addr, unsigned bytes)
{
if (!lguest_address_ok(lg, addr, bytes)
- || copy_from_user(b, (void __user *)addr, bytes) != 0) {
+ || copy_from_user(b, lg->mem_base + addr, bytes) != 0) {
/* copy_from_user should do this, but as we rely on it... */
memset(b, 0, bytes);
kill_guest(lg, "bad read address %#lx len %u", addr, bytes);
unsigned bytes)
{
if (!lguest_address_ok(lg, addr, bytes)
- || copy_to_user((void __user *)addr, b, bytes) != 0)
+ || copy_to_user(lg->mem_base + addr, b, bytes) != 0)
kill_guest(lg, "bad write address %#lx len %u", addr, bytes);
}
/* (end of memory access helper routines) :*/
*
* Note that if the Guest were really messed up, this
* could happen before it's done the INITIALIZE
- * hypercall, so lg->lguest_data will be NULL, so
- * &lg->lguest_data->cr2 will be address 8. Writing
- * into that address won't hurt the Host at all,
- * though. */
- if (put_user(cr2, &lg->lguest_data->cr2))
+ * hypercall, so lg->lguest_data will be NULL */
+ if (lg->lguest_data
+ && put_user(cr2, &lg->lguest_data->cr2))
kill_guest(lg, "Writing cr2");
break;
case 7: /* We've intercepted a Device Not Available fault. */
* we're doing this. */
mutex_lock(&lguest_lock);
down_read(fshared);
- if (get_futex_key((u32 __user *)ukey, fshared, &key) != 0) {
+ if (get_futex_key(lg->mem_base + ukey, fshared, &key) != 0) {
kill_guest(lg, "bad dma key %#lx", ukey);
goto unlock;
}
void *buf, u32 addr, unsigned bytes)
{
if (!lguest_address_ok(lg, addr, bytes)
- || access_process_vm(lg->tsk, addr, buf, bytes, 0) != bytes) {
+ || access_process_vm(lg->tsk, (unsigned long)lg->mem_base + addr,
+ buf, bytes, 0) != bytes) {
memset(buf, 0, bytes);
kill_guest(lg, "bad address in registered DMA struct");
return 0;
const void *buf, unsigned bytes)
{
if (!lguest_address_ok(lg, addr, bytes)
- || (access_process_vm(lg->tsk, addr, (void *)buf, bytes, 1)
- != bytes)) {
+ || access_process_vm(lg->tsk, (unsigned long)lg->mem_base + addr,
+ (void *)buf, bytes, 1) != bytes) {
kill_guest(lg, "bad address writing to registered DMA");
return 0;
}
* copy_to_user_page(), and some arch's seem to need special
* flushes. x86 is fine. */
if (copy_from_user(maddr + (dst->addr[di] + dstoff)%PAGE_SIZE,
- (void __user *)src->addr[si], len) != 0) {
+ srclg->mem_base+src->addr[si], len) != 0) {
/* If a copy failed, it's the source's fault. */
kill_guest(srclg, "bad address in sending DMA");
totlen = 0;
* number of pages. Note that we're holding the destination's
* mmap_sem, as get_user_pages() requires. */
if (get_user_pages(dstlg->tsk, dstlg->mm,
- dst->addr[i], 1, 1, 1, pages+i, NULL)
+ (unsigned long)dstlg->mem_base+dst->addr[i],
+ 1, 1, 1, pages+i, NULL)
!= 1) {
/* This means the destination gave us a bogus buffer */
kill_guest(dstlg, "Error mapping DMA pages");
mutex_lock(&lguest_lock);
down_read(fshared);
/* Get the futex key for the key the Guest gave us */
- if (get_futex_key((u32 __user *)ukey, fshared, &key) != 0) {
+ if (get_futex_key(lg->mem_base + ukey, fshared, &key) != 0) {
kill_guest(lg, "bad sending DMA key");
goto unlock;
}
/* This can fail if it's not a valid address, or if the address is not
* divisible by 4 (the futex code needs that, we don't really). */
- if (get_futex_key((u32 __user *)ukey, fshared, &key) != 0) {
+ if (get_futex_key(lg->mem_base + ukey, fshared, &key) != 0) {
kill_guest(lg, "bad registered DMA buffer");
goto unlock;
}
projects / linux-2.6-omap-h63xx.git / commitdiff