]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[SCSI] aacraid: Fix aacraid probe breakage (updated)
authorMark Haverkamp <markh@osdl.org>
Mon, 15 Aug 2005 17:50:24 +0000 (10:50 -0700)
committerJames Bottomley <jejb@mulgrave.(none)>
Sun, 28 Aug 2005 16:14:07 +0000 (11:14 -0500)
This patch fixes the bad assumption of the aacraid driver with use_sg.
I used the 3w-xxxx driver fix as a guide for this.

Signed-off-by: Mark Haverkamp <markh@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
drivers/scsi/aacraid/aachba.c

index 8e3493587299d2de8ae6e503be0b02d01f473522..83bfab73ff65cd2deb2205ae75f7d3c067562e8f 100644 (file)
@@ -349,6 +349,27 @@ static void aac_io_done(struct scsi_cmnd * scsicmd)
        spin_unlock_irqrestore(host->host_lock, cpu_flags);
 }
 
+static void aac_internal_transfer(struct scsi_cmnd *scsicmd, void *data, unsigned int offset, unsigned int len)
+{
+       void *buf;
+       unsigned int transfer_len;
+       struct scatterlist *sg = scsicmd->request_buffer;
+
+       if (scsicmd->use_sg) {
+               buf = kmap_atomic(sg->page, KM_IRQ0) + sg->offset;
+               transfer_len = min(sg->length, len + offset);
+       } else {
+               buf = scsicmd->request_buffer;
+               transfer_len = min(scsicmd->request_bufflen, len + offset);
+       }
+
+       memcpy(buf + offset, data, transfer_len - offset);
+
+       if (scsicmd->use_sg) 
+               kunmap_atomic(buf - sg->offset, KM_IRQ0);
+
+}
+
 static void get_container_name_callback(void *context, struct fib * fibptr)
 {
        struct aac_get_name_resp * get_name_reply;
@@ -364,18 +385,22 @@ static void get_container_name_callback(void *context, struct fib * fibptr)
        /* Failure is irrelevant, using default value instead */
        if ((le32_to_cpu(get_name_reply->status) == CT_OK)
         && (get_name_reply->data[0] != '\0')) {
-               int    count;
-               char * dp;
-               char * sp = get_name_reply->data;
+               char *sp = get_name_reply->data;
                sp[sizeof(((struct aac_get_name_resp *)NULL)->data)-1] = '\0';
                while (*sp == ' ')
                        ++sp;
-               count = sizeof(((struct inquiry_data *)NULL)->inqd_pid);
-               dp = ((struct inquiry_data *)scsicmd->request_buffer)->inqd_pid;
-               if (*sp) do {
-                       *dp++ = (*sp) ? *sp++ : ' ';
-               } while (--count > 0);
+               if (*sp) {
+                       char d[sizeof(((struct inquiry_data *)NULL)->inqd_pid)];
+                       int count = sizeof(d);
+                       char *dp = d;
+                       do {
+                               *dp++ = (*sp) ? *sp++ : ' ';
+                       } while (--count > 0);
+                       aac_internal_transfer(scsicmd, d, 
+                         offsetof(struct inquiry_data, inqd_pid), sizeof(d));
+               }
        }
+
        scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
 
        fib_complete(fibptr);
@@ -1344,44 +1369,45 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
        switch (scsicmd->cmnd[0]) {
        case INQUIRY:
        {
-               struct inquiry_data *inq_data_ptr;
+               struct inquiry_data inq_data;
 
                dprintk((KERN_DEBUG "INQUIRY command, ID: %d.\n", scsicmd->device->id));
-               inq_data_ptr = (struct inquiry_data *)scsicmd->request_buffer;
-               memset(inq_data_ptr, 0, sizeof (struct inquiry_data));
+               memset(&inq_data, 0, sizeof (struct inquiry_data));
 
-               inq_data_ptr->inqd_ver = 2;     /* claim compliance to SCSI-2 */
-               inq_data_ptr->inqd_dtq = 0x80;  /* set RMB bit to one indicating that the medium is removable */
-               inq_data_ptr->inqd_rdf = 2;     /* A response data format value of two indicates that the data shall be in the format specified in SCSI-2 */
-               inq_data_ptr->inqd_len = 31;
+               inq_data.inqd_ver = 2;  /* claim compliance to SCSI-2 */
+               inq_data.inqd_dtq = 0x80;       /* set RMB bit to one indicating that the medium is removable */
+               inq_data.inqd_rdf = 2;  /* A response data format value of two indicates that the data shall be in the format specified in SCSI-2 */
+               inq_data.inqd_len = 31;
                /*Format for "pad2" is  RelAdr | WBus32 | WBus16 |  Sync  | Linked |Reserved| CmdQue | SftRe */
-               inq_data_ptr->inqd_pad2= 0x32 ;  /*WBus16|Sync|CmdQue */
+               inq_data.inqd_pad2= 0x32 ;       /*WBus16|Sync|CmdQue */
                /*
                 *      Set the Vendor, Product, and Revision Level
                 *      see: <vendor>.c i.e. aac.c
                 */
                if (scsicmd->device->id == host->this_id) {
-                       setinqstr(cardtype, (void *) (inq_data_ptr->inqd_vid), (sizeof(container_types)/sizeof(char *)));
-                       inq_data_ptr->inqd_pdt = INQD_PDT_PROC; /* Processor device */
+                       setinqstr(cardtype, (void *) (inq_data.inqd_vid), (sizeof(container_types)/sizeof(char *)));
+                       inq_data.inqd_pdt = INQD_PDT_PROC;      /* Processor device */
+                       aac_internal_transfer(scsicmd, &inq_data, 0, sizeof(inq_data));
                        scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
                        scsicmd->scsi_done(scsicmd);
                        return 0;
                }
-               setinqstr(cardtype, (void *) (inq_data_ptr->inqd_vid), fsa_dev_ptr[cid].type);
-               inq_data_ptr->inqd_pdt = INQD_PDT_DA;   /* Direct/random access device */
+               setinqstr(cardtype, (void *) (inq_data.inqd_vid), fsa_dev_ptr[cid].type);
+               inq_data.inqd_pdt = INQD_PDT_DA;        /* Direct/random access device */
+               aac_internal_transfer(scsicmd, &inq_data, 0, sizeof(inq_data));
                return aac_get_container_name(scsicmd, cid);
        }
        case READ_CAPACITY:
        {
                u32 capacity;
-               char *cp;
+               char cp[8];
 
                dprintk((KERN_DEBUG "READ CAPACITY command.\n"));
                if (fsa_dev_ptr[cid].size <= 0x100000000LL)
                        capacity = fsa_dev_ptr[cid].size - 1;
                else
                        capacity = (u32)-1;
-               cp = scsicmd->request_buffer;
+
                cp[0] = (capacity >> 24) & 0xff;
                cp[1] = (capacity >> 16) & 0xff;
                cp[2] = (capacity >> 8) & 0xff;
@@ -1390,6 +1416,7 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
                cp[5] = 0;
                cp[6] = 2;
                cp[7] = 0;
+               aac_internal_transfer(scsicmd, cp, 0, sizeof(cp));
 
                scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
                scsicmd->scsi_done(scsicmd);
@@ -1399,15 +1426,15 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
 
        case MODE_SENSE:
        {
-               char *mode_buf;
+               char mode_buf[4];
 
                dprintk((KERN_DEBUG "MODE SENSE command.\n"));
-               mode_buf = scsicmd->request_buffer;
                mode_buf[0] = 3;        /* Mode data length */
                mode_buf[1] = 0;        /* Medium type - default */
                mode_buf[2] = 0;        /* Device-specific param, bit 8: 0/1 = write enabled/protected */
                mode_buf[3] = 0;        /* Block descriptor length */
 
+               aac_internal_transfer(scsicmd, mode_buf, 0, sizeof(mode_buf));
                scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
                scsicmd->scsi_done(scsicmd);
 
@@ -1415,10 +1442,9 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
        }
        case MODE_SENSE_10:
        {
-               char *mode_buf;
+               char mode_buf[8];
 
                dprintk((KERN_DEBUG "MODE SENSE 10 byte command.\n"));
-               mode_buf = scsicmd->request_buffer;
                mode_buf[0] = 0;        /* Mode data length (MSB) */
                mode_buf[1] = 6;        /* Mode data length (LSB) */
                mode_buf[2] = 0;        /* Medium type - default */
@@ -1427,6 +1453,7 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
                mode_buf[5] = 0;        /* reserved */
                mode_buf[6] = 0;        /* Block descriptor length (MSB) */
                mode_buf[7] = 0;        /* Block descriptor length (LSB) */
+               aac_internal_transfer(scsicmd, mode_buf, 0, sizeof(mode_buf));
 
                scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
                scsicmd->scsi_done(scsicmd);