[ALSA] opti93x: fix sound ouput for Opti930

This patch fixes silenced output from the Opti930.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c
index fe1afc13a01d4bdf6a373a40611f24e734788dcf..fc15b88364b4f6f0444a57100eca8f3c1cb289b2 100644 (file)
--- a/sound/isa/opti9xx/opti92x-ad1848.c
+++ b/sound/isa/opti9xx/opti92x-ad1848.c
@@ -491,16 +491,9 @@ static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip)
                break;
 
 #else  /* OPTi93X */
-       case OPTi9XX_HW_82C930:
        case OPTi9XX_HW_82C931:
        case OPTi9XX_HW_82C933:
-               snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(6), 0x02, 0x03);
-               snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(3), 0x00, 0xff);
-               snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(4), 0x10 |
-                       (chip->hardware == OPTi9XX_HW_82C930 ? 0x00 : 0x04),
-                       0x34);
-               snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(5), 0x20, 0xbf);
-               /* 
+               /*
                 * The BTC 1817DW has QS1000 wavetable which is connected
                 * to the serial digital input of the OPTI931.
                 */
@@ -510,6 +503,13 @@ static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip)
                 * or digital input signal.
                 */
                snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(26), 0x01, 0x01);
+       case OPTi9XX_HW_82C930: /* FALL THROUGH */
+               snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(6), 0x02, 0x03);
+               snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(3), 0x00, 0xff);
+               snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(4), 0x10 |
+                       (chip->hardware == OPTi9XX_HW_82C930 ? 0x00 : 0x04),
+                       0x34);
+               snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(5), 0x20, 0xbf);
                break;
 #endif /* OPTi93X */