spi: au1550_spi: proper platform device

Remove the Au1550 resource table and instead extract MMIO/IRQ/DMA
resources from platform resource information like any well-behaved
platform driver.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c
index 072c4a595334dd41de5ed7d7ec2f9bc85d6817b4..3860dd2fa5d9253d2e2f3ff050069165ce5009ab 100644 (file)
--- a/drivers/spi/au1550_spi.c
+++ b/drivers/spi/au1550_spi.c
@@ -26,6 +26,7 @@
 #include <linux/errno.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
+#include <linux/resource.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
 #include <linux/dma-mapping.h>
@@ -81,6 +82,7 @@ struct au1550_spi {
        struct spi_master *master;
        struct device *dev;
        struct au1550_spi_info *pdata;
+       struct resource *ioarea;
 };
 
 
@@ -96,6 +98,8 @@ static dbdev_tab_t au1550_spi_mem_dbdev =
        .dev_intpolarity        = 0
 };
 
+static int ddma_memid; /* id to above mem dma device */
+
 static void au1550_spi_bits_handlers_set(struct au1550_spi *hw, int bpw);
 
 
@@ -732,6 +736,7 @@ static int __init au1550_spi_probe(struct platform_device *pdev)
 {
        struct au1550_spi *hw;
        struct spi_master *master;
+       struct resource *r;
        int err = 0;
 
        master = spi_alloc_master(&pdev->dev, sizeof(struct au1550_spi));
@@ -753,76 +758,64 @@ static int __init au1550_spi_probe(struct platform_device *pdev)
                goto err_no_pdata;
        }
 
-       platform_set_drvdata(pdev, hw);
-
-       init_completion(&hw->master_done);
-
-       hw->bitbang.master = hw->master;
-       hw->bitbang.setup_transfer = au1550_spi_setupxfer;
-       hw->bitbang.chipselect = au1550_spi_chipsel;
-       hw->bitbang.master->setup = au1550_spi_setup;
-       hw->bitbang.txrx_bufs = au1550_spi_txrx_bufs;
+       r = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+       if (!r) {
+               dev_err(&pdev->dev, "no IRQ\n");
+               err = -ENODEV;
+               goto err_no_iores;
+       }
+       hw->irq = r->start;
+
+       hw->usedma = 0;
+       r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+       if (r) {
+               hw->dma_tx_id = r->start;
+               r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+               if (r) {
+                       hw->dma_rx_id = r->start;
+                       if (usedma && ddma_memid) {
+                               if (pdev->dev.dma_mask == NULL)
+                                       dev_warn(&pdev->dev, "no dma mask\n");
+                               else
+                                       hw->usedma = 1;
+                       }
+               }
+       }
 
-       switch (hw->pdata->bus_num) {
-       case 0:
-               hw->irq = AU1550_PSC0_INT;
-               hw->regs = (volatile psc_spi_t *)PSC0_BASE_ADDR;
-               hw->dma_rx_id = DSCR_CMD0_PSC0_RX;
-               hw->dma_tx_id = DSCR_CMD0_PSC0_TX;
-               break;
-       case 1:
-               hw->irq = AU1550_PSC1_INT;
-               hw->regs = (volatile psc_spi_t *)PSC1_BASE_ADDR;
-               hw->dma_rx_id = DSCR_CMD0_PSC1_RX;
-               hw->dma_tx_id = DSCR_CMD0_PSC1_TX;
-               break;
-       case 2:
-               hw->irq = AU1550_PSC2_INT;
-               hw->regs = (volatile psc_spi_t *)PSC2_BASE_ADDR;
-               hw->dma_rx_id = DSCR_CMD0_PSC2_RX;
-               hw->dma_tx_id = DSCR_CMD0_PSC2_TX;
-               break;
-       case 3:
-               hw->irq = AU1550_PSC3_INT;
-               hw->regs = (volatile psc_spi_t *)PSC3_BASE_ADDR;
-               hw->dma_rx_id = DSCR_CMD0_PSC3_RX;
-               hw->dma_tx_id = DSCR_CMD0_PSC3_TX;
-               break;
-       default:
-               dev_err(&pdev->dev, "Wrong bus_num of SPI\n");
-               err = -ENOENT;
-               goto err_no_pdata;
+       r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!r) {
+               dev_err(&pdev->dev, "no mmio resource\n");
+               err = -ENODEV;
+               goto err_no_iores;
        }
 
-       if (request_mem_region((unsigned long)hw->regs, sizeof(psc_spi_t),
-                       pdev->name) == NULL) {
+       hw->ioarea = request_mem_region(r->start, sizeof(psc_spi_t),
+                                       pdev->name);
+       if (!hw->ioarea) {
                dev_err(&pdev->dev, "Cannot reserve iomem region\n");
                err = -ENXIO;
                goto err_no_iores;
        }
 
-
-       if (usedma) {
-               if (pdev->dev.dma_mask == NULL)
-                       dev_warn(&pdev->dev, "no dma mask\n");
-               else
-                       hw->usedma = 1;
+       hw->regs = (psc_spi_t __iomem *)ioremap(r->start, sizeof(psc_spi_t));
+       if (!hw->regs) {
+               dev_err(&pdev->dev, "cannot ioremap\n");
+               err = -ENXIO;
+               goto err_ioremap;
        }
 
-       if (hw->usedma) {
-               /*
-                * create memory device with 8 bits dev_devwidth
-                * needed for proper byte ordering to spi fifo
-                */
-               int memid = au1xxx_ddma_add_device(&au1550_spi_mem_dbdev);
-               if (!memid) {
-                       dev_err(&pdev->dev,
-                               "Cannot create dma 8 bit mem device\n");
-                       err = -ENXIO;
-                       goto err_dma_add_dev;
-               }
+       platform_set_drvdata(pdev, hw);
 
-               hw->dma_tx_ch = au1xxx_dbdma_chan_alloc(memid,
+       init_completion(&hw->master_done);
+
+       hw->bitbang.master = hw->master;
+       hw->bitbang.setup_transfer = au1550_spi_setupxfer;
+       hw->bitbang.chipselect = au1550_spi_chipsel;
+       hw->bitbang.master->setup = au1550_spi_setup;
+       hw->bitbang.txrx_bufs = au1550_spi_txrx_bufs;
+
+       if (hw->usedma) {
+               hw->dma_tx_ch = au1xxx_dbdma_chan_alloc(ddma_memid,
                        hw->dma_tx_id, NULL, (void *)hw);
                if (hw->dma_tx_ch == 0) {
                        dev_err(&pdev->dev,
@@ -841,7 +834,7 @@ static int __init au1550_spi_probe(struct platform_device *pdev)
 
 
                hw->dma_rx_ch = au1xxx_dbdma_chan_alloc(hw->dma_rx_id,
-                       memid, NULL, (void *)hw);
+                       ddma_memid, NULL, (void *)hw);
                if (hw->dma_rx_ch == 0) {
                        dev_err(&pdev->dev,
                                "Cannot allocate rx dma channel\n");
@@ -874,7 +867,7 @@ static int __init au1550_spi_probe(struct platform_device *pdev)
                goto err_no_irq;
        }
 
-       master->bus_num = hw->pdata->bus_num;
+       master->bus_num = pdev->id;
        master->num_chipselect = hw->pdata->num_chipselect;
 
        /*
@@ -924,8 +917,11 @@ err_no_txdma_descr:
                au1xxx_dbdma_chan_free(hw->dma_tx_ch);
 
 err_no_txdma:
-err_dma_add_dev:
-       release_mem_region((unsigned long)hw->regs, sizeof(psc_spi_t));
+       iounmap((void __iomem *)hw->regs);
+
+err_ioremap:
+       release_resource(hw->ioarea);
+       kfree(hw->ioarea);
 
 err_no_iores:
 err_no_pdata:
@@ -944,7 +940,9 @@ static int __exit au1550_spi_remove(struct platform_device *pdev)
 
        spi_bitbang_stop(&hw->bitbang);
        free_irq(hw->irq, hw);
-       release_mem_region((unsigned long)hw->regs, sizeof(psc_spi_t));
+       iounmap((void __iomem *)hw->regs);
+       release_resource(hw->ioarea);
+       kfree(hw->ioarea);
 
        if (hw->usedma) {
                au1550_spi_dma_rxtmp_free(hw);
@@ -971,12 +969,24 @@ static struct platform_driver au1550_spi_drv = {
 
 static int __init au1550_spi_init(void)
 {
+       /*
+        * create memory device with 8 bits dev_devwidth
+        * needed for proper byte ordering to spi fifo
+        */
+       if (usedma) {
+               ddma_memid = au1xxx_ddma_add_device(&au1550_spi_mem_dbdev);
+               if (!ddma_memid)
+                       printk(KERN_ERR "au1550-spi: cannot add memory"
+                                       "dbdma device\n");
+       }
        return platform_driver_probe(&au1550_spi_drv, au1550_spi_probe);
 }
 module_init(au1550_spi_init);
 
 static void __exit au1550_spi_exit(void)
 {
+       if (usedma && ddma_memid)
+               au1xxx_ddma_del_device(ddma_memid);
        platform_driver_unregister(&au1550_spi_drv);
 }
 module_exit(au1550_spi_exit);

diff --git a/include/asm-mips/mach-au1x00/au1550_spi.h b/include/asm-mips/mach-au1x00/au1550_spi.h
index 40e6c489833a06ae628460dfbe11326d2541cc6b..08e1958e9410e40c7078fc0fd10d5cafae9ee06c 100644 (file)
--- a/include/asm-mips/mach-au1x00/au1550_spi.h
+++ b/include/asm-mips/mach-au1x00/au1550_spi.h
@@ -6,7 +6,6 @@
 #define _AU1550_SPI_H_
 
 struct au1550_spi_info {
-       s16 bus_num;            /* defines which PSC and IRQ to use */
        u32 mainclk_hz;         /* main input clock frequency of PSC */
        u16 num_chipselect;     /* number of chipselects supported */
        void (*activate_cs)(struct au1550_spi_info *spi, int cs, int polarity);