--- /dev/null
+/*
+ * driver/usb/gadget/fsl_qe_udc.c
+ *
+ * Copyright (c) 2006-2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Xie Xiaobo <X.Xie@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ * Based on bareboard code from Shlomi Gridish.
+ *
+ * Description:
+ * Freescle QE/CPM USB Pheripheral Controller Driver
+ * The controller can be found on MPC8360, MPC8272, and etc.
+ * MPC8360 Rev 1.1 may need QE mircocode update
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#undef USB_TRACE
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/moduleparam.h>
+#include <linux/of_platform.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <asm/qe.h>
+#include <asm/cpm.h>
+#include <asm/dma.h>
+#include <asm/reg.h>
+#include "fsl_qe_udc.h"
+
+#define DRIVER_DESC "Freescale QE/CPM USB Device Controller driver"
+#define DRIVER_AUTHOR "Xie XiaoBo"
+#define DRIVER_VERSION "1.0"
+
+#define DMA_ADDR_INVALID (~(dma_addr_t)0)
+
+static const char driver_name[] = "fsl_qe_udc";
+static const char driver_desc[] = DRIVER_DESC;
+
+/*ep name is important in gadget, it should obey the convention of ep_match()*/
+static const char *const ep_name[] = {
+ "ep0-control", /* everyone has ep0 */
+ /* 3 configurable endpoints */
+ "ep1",
+ "ep2",
+ "ep3",
+};
+
+static struct usb_endpoint_descriptor qe_ep0_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = 0,
+ .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
+ .wMaxPacketSize = USB_MAX_CTRL_PAYLOAD,
+};
+
+/* it is initialized in probe() */
+static struct qe_udc *udc_controller;
+
+/********************************************************************
+ * Internal Used Function Start
+********************************************************************/
+/*-----------------------------------------------------------------
+ * done() - retire a request; caller blocked irqs
+ *--------------------------------------------------------------*/
+static void done(struct qe_ep *ep, struct qe_req *req, int status)
+{
+ struct qe_udc *udc = ep->udc;
+ unsigned char stopped = ep->stopped;
+
+ /* the req->queue pointer is used by ep_queue() func, in which
+ * the request will be added into a udc_ep->queue 'd tail
+ * so here the req will be dropped from the ep->queue
+ */
+ list_del_init(&req->queue);
+
+ /* req.status should be set as -EINPROGRESS in ep_queue() */
+ if (req->req.status == -EINPROGRESS)
+ req->req.status = status;
+ else
+ status = req->req.status;
+
+ if (req->mapped) {
+ dma_unmap_single(udc->gadget.dev.parent,
+ req->req.dma, req->req.length,
+ ep_is_in(ep)
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+ req->req.dma = DMA_ADDR_INVALID;
+ req->mapped = 0;
+ } else
+ dma_sync_single_for_cpu(udc->gadget.dev.parent,
+ req->req.dma, req->req.length,
+ ep_is_in(ep)
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+
+ if (status && (status != -ESHUTDOWN))
+ dev_vdbg(udc->dev, "complete %s req %p stat %d len %u/%u\n",
+ ep->ep.name, &req->req, status,
+ req->req.actual, req->req.length);
+
+ /* don't modify queue heads during completion callback */
+ ep->stopped = 1;
+ spin_unlock(&udc->lock);
+
+ /* this complete() should a func implemented by gadget layer,
+ * eg fsg->bulk_in_complete() */
+ if (req->req.complete)
+ req->req.complete(&ep->ep, &req->req);
+
+ spin_lock(&udc->lock);
+
+ ep->stopped = stopped;
+}
+
+/*-----------------------------------------------------------------
+ * nuke(): delete all requests related to this ep
+ *--------------------------------------------------------------*/
+static void nuke(struct qe_ep *ep, int status)
+{
+ /* Whether this eq has request linked */
+ while (!list_empty(&ep->queue)) {
+ struct qe_req *req = NULL;
+ req = list_entry(ep->queue.next, struct qe_req, queue);
+
+ done(ep, req, status);
+ }
+}
+
+/*---------------------------------------------------------------------------*
+ * USB and Endpoint manipulate process, include parameter and register *
+ *---------------------------------------------------------------------------*/
+/* @value: 1--set stall 0--clean stall */
+static int qe_eprx_stall_change(struct qe_ep *ep, int value)
+{
+ u16 tem_usep;
+ u8 epnum = ep->epnum;
+ struct qe_udc *udc = ep->udc;
+
+ tem_usep = in_be16(&udc->usb_regs->usb_usep[epnum]);
+ tem_usep = tem_usep & ~USB_RHS_MASK;
+ if (value == 1)
+ tem_usep |= USB_RHS_STALL;
+ else if (ep->dir == USB_DIR_IN)
+ tem_usep |= USB_RHS_IGNORE_OUT;
+
+ out_be16(&udc->usb_regs->usb_usep[epnum], tem_usep);
+ return 0;
+}
+
+static int qe_eptx_stall_change(struct qe_ep *ep, int value)
+{
+ u16 tem_usep;
+ u8 epnum = ep->epnum;
+ struct qe_udc *udc = ep->udc;
+
+ tem_usep = in_be16(&udc->usb_regs->usb_usep[epnum]);
+ tem_usep = tem_usep & ~USB_THS_MASK;
+ if (value == 1)
+ tem_usep |= USB_THS_STALL;
+ else if (ep->dir == USB_DIR_OUT)
+ tem_usep |= USB_THS_IGNORE_IN;
+
+ out_be16(&udc->usb_regs->usb_usep[epnum], tem_usep);
+
+ return 0;
+}
+
+static int qe_ep0_stall(struct qe_udc *udc)
+{
+ qe_eptx_stall_change(&udc->eps[0], 1);
+ qe_eprx_stall_change(&udc->eps[0], 1);
+ udc_controller->ep0_state = WAIT_FOR_SETUP;
+ udc_controller->ep0_dir = 0;
+ return 0;
+}
+
+static int qe_eprx_nack(struct qe_ep *ep)
+{
+ u8 epnum = ep->epnum;
+ struct qe_udc *udc = ep->udc;
+
+ if (ep->state == EP_STATE_IDLE) {
+ /* Set the ep's nack */
+ clrsetbits_be16(&udc->usb_regs->usb_usep[epnum],
+ USB_RHS_MASK, USB_RHS_NACK);
+
+ /* Mask Rx and Busy interrupts */
+ clrbits16(&udc->usb_regs->usb_usbmr,
+ (USB_E_RXB_MASK | USB_E_BSY_MASK));
+
+ ep->state = EP_STATE_NACK;
+ }
+ return 0;
+}
+
+static int qe_eprx_normal(struct qe_ep *ep)
+{
+ struct qe_udc *udc = ep->udc;
+
+ if (ep->state == EP_STATE_NACK) {
+ clrsetbits_be16(&udc->usb_regs->usb_usep[ep->epnum],
+ USB_RTHS_MASK, USB_THS_IGNORE_IN);
+
+ /* Unmask RX interrupts */
+ out_be16(&udc->usb_regs->usb_usber,
+ USB_E_BSY_MASK | USB_E_RXB_MASK);
+ setbits16(&udc->usb_regs->usb_usbmr,
+ (USB_E_RXB_MASK | USB_E_BSY_MASK));
+
+ ep->state = EP_STATE_IDLE;
+ ep->has_data = 0;
+ }
+
+ return 0;
+}
+
+static int qe_ep_cmd_stoptx(struct qe_ep *ep)
+{
+ if (ep->udc->soc_type == PORT_CPM)
+ cpm_command(CPM_USB_STOP_TX | (ep->epnum << CPM_USB_EP_SHIFT),
+ CPM_USB_STOP_TX_OPCODE);
+ else
+ qe_issue_cmd(QE_USB_STOP_TX, QE_CR_SUBBLOCK_USB,
+ ep->epnum, 0);
+
+ return 0;
+}
+
+static int qe_ep_cmd_restarttx(struct qe_ep *ep)
+{
+ if (ep->udc->soc_type == PORT_CPM)
+ cpm_command(CPM_USB_RESTART_TX | (ep->epnum <<
+ CPM_USB_EP_SHIFT), CPM_USB_RESTART_TX_OPCODE);
+ else
+ qe_issue_cmd(QE_USB_RESTART_TX, QE_CR_SUBBLOCK_USB,
+ ep->epnum, 0);
+
+ return 0;
+}
+
+static int qe_ep_flushtxfifo(struct qe_ep *ep)
+{
+ struct qe_udc *udc = ep->udc;
+ int i;
+
+ i = (int)ep->epnum;
+
+ qe_ep_cmd_stoptx(ep);
+ out_8(&udc->usb_regs->usb_uscom,
+ USB_CMD_FLUSH_FIFO | (USB_CMD_EP_MASK & (ep->epnum)));
+ out_be16(&udc->ep_param[i]->tbptr, in_be16(&udc->ep_param[i]->tbase));
+ out_be32(&udc->ep_param[i]->tstate, 0);
+ out_be16(&udc->ep_param[i]->tbcnt, 0);
+
+ ep->c_txbd = ep->txbase;
+ ep->n_txbd = ep->txbase;
+ qe_ep_cmd_restarttx(ep);
+ return 0;
+}
+
+static int qe_ep_filltxfifo(struct qe_ep *ep)
+{
+ struct qe_udc *udc = ep->udc;
+
+ out_8(&udc->usb_regs->usb_uscom,
+ USB_CMD_STR_FIFO | (USB_CMD_EP_MASK & (ep->epnum)));
+ return 0;
+}
+
+static int qe_epbds_reset(struct qe_udc *udc, int pipe_num)
+{
+ struct qe_ep *ep;
+ u32 bdring_len;
+ struct qe_bd __iomem *bd;
+ int i;
+
+ ep = &udc->eps[pipe_num];
+
+ if (ep->dir == USB_DIR_OUT)
+ bdring_len = USB_BDRING_LEN_RX;
+ else
+ bdring_len = USB_BDRING_LEN;
+
+ bd = ep->rxbase;
+ for (i = 0; i < (bdring_len - 1); i++) {
+ out_be32((u32 __iomem *)bd, R_E | R_I);
+ bd++;
+ }
+ out_be32((u32 __iomem *)bd, R_E | R_I | R_W);
+
+ bd = ep->txbase;
+ for (i = 0; i < USB_BDRING_LEN_TX - 1; i++) {
+ out_be32(&bd->buf, 0);
+ out_be32((u32 __iomem *)bd, 0);
+ bd++;
+ }
+ out_be32((u32 __iomem *)bd, T_W);
+
+ return 0;
+}
+
+static int qe_ep_reset(struct qe_udc *udc, int pipe_num)
+{
+ struct qe_ep *ep;
+ u16 tmpusep;
+
+ ep = &udc->eps[pipe_num];
+ tmpusep = in_be16(&udc->usb_regs->usb_usep[pipe_num]);
+ tmpusep &= ~USB_RTHS_MASK;
+
+ switch (ep->dir) {
+ case USB_DIR_BOTH:
+ qe_ep_flushtxfifo(ep);
+ break;
+ case USB_DIR_OUT:
+ tmpusep |= USB_THS_IGNORE_IN;
+ break;
+ case USB_DIR_IN:
+ qe_ep_flushtxfifo(ep);
+ tmpusep |= USB_RHS_IGNORE_OUT;
+ break;
+ default:
+ break;
+ }
+ out_be16(&udc->usb_regs->usb_usep[pipe_num], tmpusep);
+
+ qe_epbds_reset(udc, pipe_num);
+
+ return 0;
+}
+
+static int qe_ep_toggledata01(struct qe_ep *ep)
+{
+ ep->data01 ^= 0x1;
+ return 0;
+}
+
+static int qe_ep_bd_init(struct qe_udc *udc, unsigned char pipe_num)
+{
+ struct qe_ep *ep = &udc->eps[pipe_num];
+ unsigned long tmp_addr = 0;
+ struct usb_ep_para __iomem *epparam;
+ int i;
+ struct qe_bd __iomem *bd;
+ int bdring_len;
+
+ if (ep->dir == USB_DIR_OUT)
+ bdring_len = USB_BDRING_LEN_RX;
+ else
+ bdring_len = USB_BDRING_LEN;
+
+ epparam = udc->ep_param[pipe_num];
+ /* alloc multi-ram for BD rings and set the ep parameters */
+ tmp_addr = cpm_muram_alloc(sizeof(struct qe_bd) * (bdring_len +
+ USB_BDRING_LEN_TX), QE_ALIGNMENT_OF_BD);
+ out_be16(&epparam->rbase, (u16)tmp_addr);
+ out_be16(&epparam->tbase, (u16)(tmp_addr +
+ (sizeof(struct qe_bd) * bdring_len)));
+
+ out_be16(&epparam->rbptr, in_be16(&epparam->rbase));
+ out_be16(&epparam->tbptr, in_be16(&epparam->tbase));
+
+ ep->rxbase = cpm_muram_addr(tmp_addr);
+ ep->txbase = cpm_muram_addr(tmp_addr + (sizeof(struct qe_bd)
+ * bdring_len));
+ ep->n_rxbd = ep->rxbase;
+ ep->e_rxbd = ep->rxbase;
+ ep->n_txbd = ep->txbase;
+ ep->c_txbd = ep->txbase;
+ ep->data01 = 0; /* data0 */
+
+ /* Init TX and RX bds */
+ bd = ep->rxbase;
+ for (i = 0; i < bdring_len - 1; i++) {
+ out_be32(&bd->buf, 0);
+ out_be32((u32 __iomem *)bd, 0);
+ bd++;
+ }
+ out_be32(&bd->buf, 0);
+ out_be32((u32 __iomem *)bd, R_W);
+
+ bd = ep->txbase;
+ for (i = 0; i < USB_BDRING_LEN_TX - 1; i++) {
+ out_be32(&bd->buf, 0);
+ out_be32((u32 __iomem *)bd, 0);
+ bd++;
+ }
+ out_be32(&bd->buf, 0);
+ out_be32((u32 __iomem *)bd, T_W);
+
+ return 0;
+}
+
+static int qe_ep_rxbd_update(struct qe_ep *ep)
+{
+ unsigned int size;
+ int i;
+ unsigned int tmp;
+ struct qe_bd __iomem *bd;
+ unsigned int bdring_len;
+
+ if (ep->rxbase == NULL)
+ return -EINVAL;
+
+ bd = ep->rxbase;
+
+ ep->rxframe = kmalloc(sizeof(*ep->rxframe), GFP_ATOMIC);
+ if (ep->rxframe == NULL) {
+ dev_err(ep->udc->dev, "malloc rxframe failed\n");
+ return -ENOMEM;
+ }
+
+ qe_frame_init(ep->rxframe);
+
+ if (ep->dir == USB_DIR_OUT)
+ bdring_len = USB_BDRING_LEN_RX;
+ else
+ bdring_len = USB_BDRING_LEN;
+
+ size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) * (bdring_len + 1);
+ ep->rxbuffer = kzalloc(size, GFP_ATOMIC);
+ if (ep->rxbuffer == NULL) {
+ dev_err(ep->udc->dev, "malloc rxbuffer failed,size=%d\n",
+ size);
+ kfree(ep->rxframe);
+ return -ENOMEM;
+ }
+
+ ep->rxbuf_d = virt_to_phys((void *)ep->rxbuffer);
+ if (ep->rxbuf_d == DMA_ADDR_INVALID) {
+ ep->rxbuf_d = dma_map_single(udc_controller->gadget.dev.parent,
+ ep->rxbuffer,
+ size,
+ DMA_FROM_DEVICE);
+ ep->rxbufmap = 1;
+ } else {
+ dma_sync_single_for_device(udc_controller->gadget.dev.parent,
+ ep->rxbuf_d, size,
+ DMA_FROM_DEVICE);
+ ep->rxbufmap = 0;
+ }
+
+ size = ep->ep.maxpacket + USB_CRC_SIZE + 2;
+ tmp = ep->rxbuf_d;
+ tmp = (u32)(((tmp >> 2) << 2) + 4);
+
+ for (i = 0; i < bdring_len - 1; i++) {
+ out_be32(&bd->buf, tmp);
+ out_be32((u32 __iomem *)bd, (R_E | R_I));
+ tmp = tmp + size;
+ bd++;
+ }
+ out_be32(&bd->buf, tmp);
+ out_be32((u32 __iomem *)bd, (R_E | R_I | R_W));
+
+ return 0;
+}
+
+static int qe_ep_register_init(struct qe_udc *udc, unsigned char pipe_num)
+{
+ struct qe_ep *ep = &udc->eps[pipe_num];
+ struct usb_ep_para __iomem *epparam;
+ u16 usep, logepnum;
+ u16 tmp;
+ u8 rtfcr = 0;
+
+ epparam = udc->ep_param[pipe_num];
+
+ usep = 0;
+ logepnum = (ep->desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+ usep |= (logepnum << USB_EPNUM_SHIFT);
+
+ switch (ep->desc->bmAttributes & 0x03) {
+ case USB_ENDPOINT_XFER_BULK:
+ usep |= USB_TRANS_BULK;
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ usep |= USB_TRANS_ISO;
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ usep |= USB_TRANS_INT;
+ break;
+ default:
+ usep |= USB_TRANS_CTR;
+ break;
+ }
+
+ switch (ep->dir) {
+ case USB_DIR_OUT:
+ usep |= USB_THS_IGNORE_IN;
+ break;
+ case USB_DIR_IN:
+ usep |= USB_RHS_IGNORE_OUT;
+ break;
+ default:
+ break;
+ }
+ out_be16(&udc->usb_regs->usb_usep[pipe_num], usep);
+
+ rtfcr = 0x30;
+ out_8(&epparam->rbmr, rtfcr);
+ out_8(&epparam->tbmr, rtfcr);
+
+ tmp = (u16)(ep->ep.maxpacket + USB_CRC_SIZE);
+ /* MRBLR must be divisble by 4 */
+ tmp = (u16)(((tmp >> 2) << 2) + 4);
+ out_be16(&epparam->mrblr, tmp);
+
+ return 0;
+}
+
+static int qe_ep_init(struct qe_udc *udc,
+ unsigned char pipe_num,
+ const struct usb_endpoint_descriptor *desc)
+{
+ struct qe_ep *ep = &udc->eps[pipe_num];
+ unsigned long flags;
+ int reval = 0;
+ u16 max = 0;
+
+ max = le16_to_cpu(desc->wMaxPacketSize);
+
+ /* check the max package size validate for this endpoint */
+ /* Refer to USB2.0 spec table 9-13,
+ */
+ if (pipe_num != 0) {
+ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+ case USB_ENDPOINT_XFER_BULK:
+ if (strstr(ep->ep.name, "-iso")
+ || strstr(ep->ep.name, "-int"))
+ goto en_done;
+ switch (udc->gadget.speed) {
+ case USB_SPEED_HIGH:
+ if ((max == 128) || (max == 256) || (max == 512))
+ break;
+ default:
+ switch (max) {
+ case 4:
+ case 8:
+ case 16:
+ case 32:
+ case 64:
+ break;
+ default:
+ case USB_SPEED_LOW:
+ goto en_done;
+ }
+ }
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ if (strstr(ep->ep.name, "-iso")) /* bulk is ok */
+ goto en_done;
+ switch (udc->gadget.speed) {
+ case USB_SPEED_HIGH:
+ if (max <= 1024)
+ break;
+ case USB_SPEED_FULL:
+ if (max <= 64)
+ break;
+ default:
+ if (max <= 8)
+ break;
+ goto en_done;
+ }
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ if (strstr(ep->ep.name, "-bulk")
+ || strstr(ep->ep.name, "-int"))
+ goto en_done;
+ switch (udc->gadget.speed) {
+ case USB_SPEED_HIGH:
+ if (max <= 1024)
+ break;
+ case USB_SPEED_FULL:
+ if (max <= 1023)
+ break;
+ default:
+ goto en_done;
+ }
+ break;
+ case USB_ENDPOINT_XFER_CONTROL:
+ if (strstr(ep->ep.name, "-iso")
+ || strstr(ep->ep.name, "-int"))
+ goto en_done;
+ switch (udc->gadget.speed) {
+ case USB_SPEED_HIGH:
+ case USB_SPEED_FULL:
+ switch (max) {
+ case 1:
+ case 2:
+ case 4:
+ case 8:
+ case 16:
+ case 32:
+ case 64:
+ break;
+ default:
+ goto en_done;
+ }
+ case USB_SPEED_LOW:
+ switch (max) {
+ case 1:
+ case 2:
+ case 4:
+ case 8:
+ break;
+ default:
+ goto en_done;
+ }
+ default:
+ goto en_done;
+ }
+ break;
+
+ default:
+ goto en_done;
+ }
+ } /* if ep0*/
+
+ spin_lock_irqsave(&udc->lock, flags);
+
+ /* initialize ep structure */
+ ep->ep.maxpacket = max;
+ ep->tm = (u8)(desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK);
+ ep->desc = desc;
+ ep->stopped = 0;
+ ep->init = 1;
+
+ if (pipe_num == 0) {
+ ep->dir = USB_DIR_BOTH;
+ udc->ep0_dir = USB_DIR_OUT;
+ udc->ep0_state = WAIT_FOR_SETUP;
+ } else {
+ switch (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) {
+ case USB_DIR_OUT:
+ ep->dir = USB_DIR_OUT;
+ break;
+ case USB_DIR_IN:
+ ep->dir = USB_DIR_IN;
+ default:
+ break;
+ }
+ }
+
+ /* hardware special operation */
+ qe_ep_bd_init(udc, pipe_num);
+ if ((ep->tm == USBP_TM_CTL) || (ep->dir == USB_DIR_OUT)) {
+ reval = qe_ep_rxbd_update(ep);
+ if (reval)
+ goto en_done1;
+ }
+
+ if ((ep->tm == USBP_TM_CTL) || (ep->dir == USB_DIR_IN)) {
+ ep->txframe = kmalloc(sizeof(*ep->txframe), GFP_ATOMIC);
+ if (ep->txframe == NULL) {
+ dev_err(udc->dev, "malloc txframe failed\n");
+ goto en_done2;
+ }
+ qe_frame_init(ep->txframe);
+ }
+
+ qe_ep_register_init(udc, pipe_num);
+
+ /* Now HW will be NAKing transfers to that EP,
+ * until a buffer is queued to it. */
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ return 0;
+en_done2:
+ kfree(ep->rxbuffer);
+ kfree(ep->rxframe);
+en_done1:
+ spin_unlock_irqrestore(&udc->lock, flags);
+en_done:
+ dev_dbg(udc->dev, "failed to initialize %s\n", ep->ep.name);
+ return -ENODEV;
+}
+
+static inline void qe_usb_enable(void)
+{
+ setbits8(&udc_controller->usb_regs->usb_usmod, USB_MODE_EN);
+}
+
+static inline void qe_usb_disable(void)
+{
+ clrbits8(&udc_controller->usb_regs->usb_usmod, USB_MODE_EN);
+}
+
+/*----------------------------------------------------------------------------*
+ * USB and EP basic manipulate function end *
+ *----------------------------------------------------------------------------*/
+
+
+/******************************************************************************
+ UDC transmit and receive process
+ ******************************************************************************/
+static void recycle_one_rxbd(struct qe_ep *ep)
+{
+ u32 bdstatus;
+
+ bdstatus = in_be32((u32 __iomem *)ep->e_rxbd);
+ bdstatus = R_I | R_E | (bdstatus & R_W);
+ out_be32((u32 __iomem *)ep->e_rxbd, bdstatus);
+
+ if (bdstatus & R_W)
+ ep->e_rxbd = ep->rxbase;
+ else
+ ep->e_rxbd++;
+}
+
+static void recycle_rxbds(struct qe_ep *ep, unsigned char stopatnext)
+{
+ u32 bdstatus;
+ struct qe_bd __iomem *bd, *nextbd;
+ unsigned char stop = 0;
+
+ nextbd = ep->n_rxbd;
+ bd = ep->e_rxbd;
+ bdstatus = in_be32((u32 __iomem *)bd);
+
+ while (!(bdstatus & R_E) && !(bdstatus & BD_LENGTH_MASK) && !stop) {
+ bdstatus = R_E | R_I | (bdstatus & R_W);
+ out_be32((u32 __iomem *)bd, bdstatus);
+
+ if (bdstatus & R_W)
+ bd = ep->rxbase;
+ else
+ bd++;
+
+ bdstatus = in_be32((u32 __iomem *)bd);
+ if (stopatnext && (bd == nextbd))
+ stop = 1;
+ }
+
+ ep->e_rxbd = bd;
+}
+
+static void ep_recycle_rxbds(struct qe_ep *ep)
+{
+ struct qe_bd __iomem *bd = ep->n_rxbd;
+ u32 bdstatus;
+ u8 epnum = ep->epnum;
+ struct qe_udc *udc = ep->udc;
+
+ bdstatus = in_be32((u32 __iomem *)bd);
+ if (!(bdstatus & R_E) && !(bdstatus & BD_LENGTH_MASK)) {
+ bd = ep->rxbase +
+ ((in_be16(&udc->ep_param[epnum]->rbptr) -
+ in_be16(&udc->ep_param[epnum]->rbase))
+ >> 3);
+ bdstatus = in_be32((u32 __iomem *)bd);
+
+ if (bdstatus & R_W)
+ bd = ep->rxbase;
+ else
+ bd++;
+
+ ep->e_rxbd = bd;
+ recycle_rxbds(ep, 0);
+ ep->e_rxbd = ep->n_rxbd;
+ } else
+ recycle_rxbds(ep, 1);
+
+ if (in_be16(&udc->usb_regs->usb_usber) & USB_E_BSY_MASK)
+ out_be16(&udc->usb_regs->usb_usber, USB_E_BSY_MASK);
+
+ if (ep->has_data <= 0 && (!list_empty(&ep->queue)))
+ qe_eprx_normal(ep);
+
+ ep->localnack = 0;
+}
+
+static void setup_received_handle(struct qe_udc *udc,
+ struct usb_ctrlrequest *setup);
+static int qe_ep_rxframe_handle(struct qe_ep *ep);
+static void ep0_req_complete(struct qe_udc *udc, struct qe_req *req);
+/* when BD PID is setup, handle the packet */
+static int ep0_setup_handle(struct qe_udc *udc)
+{
+ struct qe_ep *ep = &udc->eps[0];
+ struct qe_frame *pframe;
+ unsigned int fsize;
+ u8 *cp;
+
+ pframe = ep->rxframe;
+ if ((frame_get_info(pframe) & PID_SETUP)
+ && (udc->ep0_state == WAIT_FOR_SETUP)) {
+ fsize = frame_get_length(pframe);
+ if (unlikely(fsize != 8))
+ return -EINVAL;
+ cp = (u8 *)&udc->local_setup_buff;
+ memcpy(cp, pframe->data, fsize);
+ ep->data01 = 1;
+
+ /* handle the usb command base on the usb_ctrlrequest */
+ setup_received_handle(udc, &udc->local_setup_buff);
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static int qe_ep0_rx(struct qe_udc *udc)
+{
+ struct qe_ep *ep = &udc->eps[0];
+ struct qe_frame *pframe;
+ struct qe_bd __iomem *bd;
+ u32 bdstatus, length;
+ u32 vaddr;
+
+ pframe = ep->rxframe;
+
+ if (ep->dir == USB_DIR_IN) {
+ dev_err(udc->dev, "ep0 not a control endpoint\n");
+ return -EINVAL;
+ }
+
+ bd = ep->n_rxbd;
+ bdstatus = in_be32((u32 __iomem *)bd);
+ length = bdstatus & BD_LENGTH_MASK;
+
+ while (!(bdstatus & R_E) && length) {
+ if ((bdstatus & R_F) && (bdstatus & R_L)
+ && !(bdstatus & R_ERROR)) {
+ if (length == USB_CRC_SIZE) {
+ udc->ep0_state = WAIT_FOR_SETUP;
+ dev_vdbg(udc->dev,
+ "receive a ZLP in status phase\n");
+ } else {
+ qe_frame_clean(pframe);
+ vaddr = (u32)phys_to_virt(in_be32(&bd->buf));
+ frame_set_data(pframe, (u8 *)vaddr);
+ frame_set_length(pframe,
+ (length - USB_CRC_SIZE));
+ frame_set_status(pframe, FRAME_OK);
+ switch (bdstatus & R_PID) {
+ case R_PID_SETUP:
+ frame_set_info(pframe, PID_SETUP);
+ break;
+ case R_PID_DATA1:
+ frame_set_info(pframe, PID_DATA1);
+ break;
+ default:
+ frame_set_info(pframe, PID_DATA0);
+ break;
+ }
+
+ if ((bdstatus & R_PID) == R_PID_SETUP)
+ ep0_setup_handle(udc);
+ else
+ qe_ep_rxframe_handle(ep);
+ }
+ } else {
+ dev_err(udc->dev, "The receive frame with error!\n");
+ }
+
+ /* note: don't clear the rxbd's buffer address */
+ recycle_one_rxbd(ep);
+
+ /* Get next BD */
+ if (bdstatus & R_W)
+ bd = ep->rxbase;
+ else
+ bd++;
+
+ bdstatus = in_be32((u32 __iomem *)bd);
+ length = bdstatus & BD_LENGTH_MASK;
+
+ }
+
+ ep->n_rxbd = bd;
+
+ return 0;
+}
+
+static int qe_ep_rxframe_handle(struct qe_ep *ep)
+{
+ struct qe_frame *pframe;
+ u8 framepid = 0;
+ unsigned int fsize;
+ u8 *cp;
+ struct qe_req *req;
+
+ pframe = ep->rxframe;
+
+ if (frame_get_info(pframe) & PID_DATA1)
+ framepid = 0x1;
+
+ if (framepid != ep->data01) {
+ dev_err(ep->udc->dev, "the data01 error!\n");
+ return -EIO;
+ }
+
+ fsize = frame_get_length(pframe);
+ if (list_empty(&ep->queue)) {
+ dev_err(ep->udc->dev, "the %s have no requeue!\n", ep->name);
+ } else {
+ req = list_entry(ep->queue.next, struct qe_req, queue);
+
+ cp = (u8 *)(req->req.buf) + req->req.actual;
+ if (cp) {
+ memcpy(cp, pframe->data, fsize);
+ req->req.actual += fsize;
+ if ((fsize < ep->ep.maxpacket) ||
+ (req->req.actual >= req->req.length)) {
+ if (ep->epnum == 0)
+ ep0_req_complete(ep->udc, req);
+ else
+ done(ep, req, 0);
+ if (list_empty(&ep->queue) && ep->epnum != 0)
+ qe_eprx_nack(ep);
+ }
+ }
+ }
+
+ qe_ep_toggledata01(ep);
+
+ return 0;
+}
+
+static void ep_rx_tasklet(unsigned long data)
+{
+ struct qe_udc *udc = (struct qe_udc *)data;
+ struct qe_ep *ep;
+ struct qe_frame *pframe;
+ struct qe_bd __iomem *bd;
+ unsigned long flags;
+ u32 bdstatus, length;
+ u32 vaddr, i;
+
+ spin_lock_irqsave(&udc->lock, flags);
+
+ for (i = 1; i < USB_MAX_ENDPOINTS; i++) {
+ ep = &udc->eps[i];
+
+ if (ep->dir == USB_DIR_IN || ep->enable_tasklet == 0) {
+ dev_dbg(udc->dev,
+ "This is a transmit ep or disable tasklet!\n");
+ continue;
+ }
+
+ pframe = ep->rxframe;
+ bd = ep->n_rxbd;
+ bdstatus = in_be32((u32 __iomem *)bd);
+ length = bdstatus & BD_LENGTH_MASK;
+
+ while (!(bdstatus & R_E) && length) {
+ if (list_empty(&ep->queue)) {
+ qe_eprx_nack(ep);
+ dev_dbg(udc->dev,
+ "The rxep have noreq %d\n",
+ ep->has_data);
+ break;
+ }
+
+ if ((bdstatus & R_F) && (bdstatus & R_L)
+ && !(bdstatus & R_ERROR)) {
+ qe_frame_clean(pframe);
+ vaddr = (u32)phys_to_virt(in_be32(&bd->buf));
+ frame_set_data(pframe, (u8 *)vaddr);
+ frame_set_length(pframe,
+ (length - USB_CRC_SIZE));
+ frame_set_status(pframe, FRAME_OK);
+ switch (bdstatus & R_PID) {
+ case R_PID_DATA1:
+ frame_set_info(pframe, PID_DATA1);
+ break;
+ case R_PID_SETUP:
+ frame_set_info(pframe, PID_SETUP);
+ break;
+ default:
+ frame_set_info(pframe, PID_DATA0);
+ break;
+ }
+ /* handle the rx frame */
+ qe_ep_rxframe_handle(ep);
+ } else {
+ dev_err(udc->dev,
+ "error in received frame\n");
+ }
+ /* note: don't clear the rxbd's buffer address */
+ /*clear the length */
+ out_be32((u32 __iomem *)bd, bdstatus & BD_STATUS_MASK);
+ ep->has_data--;
+ if (!(ep->localnack))
+ recycle_one_rxbd(ep);
+
+ /* Get next BD */
+ if (bdstatus & R_W)
+ bd = ep->rxbase;
+ else
+ bd++;
+
+ bdstatus = in_be32((u32 __iomem *)bd);
+ length = bdstatus & BD_LENGTH_MASK;
+ }
+
+ ep->n_rxbd = bd;
+
+ if (ep->localnack)
+ ep_recycle_rxbds(ep);
+
+ ep->enable_tasklet = 0;
+ } /* for i=1 */
+
+ spin_unlock_irqrestore(&udc->lock, flags);
+}
+
+static int qe_ep_rx(struct qe_ep *ep)
+{
+ struct qe_udc *udc;
+ struct qe_frame *pframe;
+ struct qe_bd __iomem *bd;
+ u16 swoffs, ucoffs, emptybds;
+
+ udc = ep->udc;
+ pframe = ep->rxframe;
+
+ if (ep->dir == USB_DIR_IN) {
+ dev_err(udc->dev, "transmit ep in rx function\n");
+ return -EINVAL;
+ }
+
+ bd = ep->n_rxbd;
+
+ swoffs = (u16)(bd - ep->rxbase);
+ ucoffs = (u16)((in_be16(&udc->ep_param[ep->epnum]->rbptr) -
+ in_be16(&udc->ep_param[ep->epnum]->rbase)) >> 3);
+ if (swoffs < ucoffs)
+ emptybds = USB_BDRING_LEN_RX - ucoffs + swoffs;
+ else
+ emptybds = swoffs - ucoffs;
+
+ if (emptybds < MIN_EMPTY_BDS) {
+ qe_eprx_nack(ep);
+ ep->localnack = 1;
+ dev_vdbg(udc->dev, "%d empty bds, send NACK\n", emptybds);
+ }
+ ep->has_data = USB_BDRING_LEN_RX - emptybds;
+
+ if (list_empty(&ep->queue)) {
+ qe_eprx_nack(ep);
+ dev_vdbg(udc->dev, "The rxep have no req queued with %d BDs\n",
+ ep->has_data);
+ return 0;
+ }
+
+ tasklet_schedule(&udc->rx_tasklet);
+ ep->enable_tasklet = 1;
+
+ return 0;
+}
+
+/* send data from a frame, no matter what tx_req */
+static int qe_ep_tx(struct qe_ep *ep, struct qe_frame *frame)
+{
+ struct qe_udc *udc = ep->udc;
+ struct qe_bd __iomem *bd;
+ u16 saveusbmr;
+ u32 bdstatus, pidmask;
+ u32 paddr;
+
+ if (ep->dir == USB_DIR_OUT) {
+ dev_err(udc->dev, "receive ep passed to tx function\n");
+ return -EINVAL;
+ }
+
+ /* Disable the Tx interrupt */
+ saveusbmr = in_be16(&udc->usb_regs->usb_usbmr);
+ out_be16(&udc->usb_regs->usb_usbmr,
+ saveusbmr & ~(USB_E_TXB_MASK | USB_E_TXE_MASK));
+
+ bd = ep->n_txbd;
+ bdstatus = in_be32((u32 __iomem *)bd);
+
+ if (!(bdstatus & (T_R | BD_LENGTH_MASK))) {
+ if (frame_get_length(frame) == 0) {
+ frame_set_data(frame, udc->nullbuf);
+ frame_set_length(frame, 2);
+ frame->info |= (ZLP | NO_CRC);
+ dev_vdbg(udc->dev, "the frame size = 0\n");
+ }
+ paddr = virt_to_phys((void *)frame->data);
+ out_be32(&bd->buf, paddr);
+ bdstatus = (bdstatus&T_W);
+ if (!(frame_get_info(frame) & NO_CRC))
+ bdstatus |= T_R | T_I | T_L | T_TC
+ | frame_get_length(frame);
+ else
+ bdstatus |= T_R | T_I | T_L | frame_get_length(frame);
+
+ /* if the packet is a ZLP in status phase */
+ if ((ep->epnum == 0) && (udc->ep0_state == DATA_STATE_NEED_ZLP))
+ ep->data01 = 0x1;
+
+ if (ep->data01) {
+ pidmask = T_PID_DATA1;
+ frame->info |= PID_DATA1;
+ } else {
+ pidmask = T_PID_DATA0;
+ frame->info |= PID_DATA0;
+ }
+ bdstatus |= T_CNF;
+ bdstatus |= pidmask;
+ out_be32((u32 __iomem *)bd, bdstatus);
+ qe_ep_filltxfifo(ep);
+
+ /* enable the TX interrupt */
+ out_be16(&udc->usb_regs->usb_usbmr, saveusbmr);
+
+ qe_ep_toggledata01(ep);
+ if (bdstatus & T_W)
+ ep->n_txbd = ep->txbase;
+ else
+ ep->n_txbd++;
+
+ return 0;
+ } else {
+ out_be16(&udc->usb_regs->usb_usbmr, saveusbmr);
+ dev_vdbg(udc->dev, "The tx bd is not ready!\n");
+ return -EBUSY;
+ }
+}
+
+/* when an bd was transmitted, the function can *
+ * handle the tx_req, not include ep0 */
+static int txcomplete(struct qe_ep *ep, unsigned char restart)
+{
+ if (ep->tx_req != NULL) {
+ if (!restart) {
+ int asent = ep->last;
+ ep->sent += asent;
+ ep->last -= asent;
+ } else {
+ ep->last = 0;
+ }
+
+ /* a request already were transmitted completely */
+ if ((ep->tx_req->req.length - ep->sent) <= 0) {
+ ep->tx_req->req.actual = (unsigned int)ep->sent;
+ done(ep, ep->tx_req, 0);
+ ep->tx_req = NULL;
+ ep->last = 0;
+ ep->sent = 0;
+ }
+ }
+
+ /* we should gain a new tx_req fot this endpoint */
+ if (ep->tx_req == NULL) {
+ if (!list_empty(&ep->queue)) {
+ ep->tx_req = list_entry(ep->queue.next, struct qe_req,
+ queue);
+ ep->last = 0;
+ ep->sent = 0;
+ }
+ }
+
+ return 0;
+}
+
+/* give a frame and a tx_req,send some data */
+static int qe_usb_senddata(struct qe_ep *ep, struct qe_frame *frame)
+{
+ unsigned int size;
+ u8 *buf;
+
+ qe_frame_clean(frame);
+ size = min_t(u32, (ep->tx_req->req.length - ep->sent),
+ ep->ep.maxpacket);
+ buf = (u8 *)ep->tx_req->req.buf + ep->sent;
+ if (buf && size) {
+ ep->last = size;
+ frame_set_data(frame, buf);
+ frame_set_length(frame, size);
+ frame_set_status(frame, FRAME_OK);
+ frame_set_info(frame, 0);
+ return qe_ep_tx(ep, frame);
+ }
+ return -EIO;
+}
+
+/* give a frame struct,send a ZLP */
+static int sendnulldata(struct qe_ep *ep, struct qe_frame *frame, uint infor)
+{
+ struct qe_udc *udc = ep->udc;
+
+ if (frame == NULL)
+ return -ENODEV;
+
+ qe_frame_clean(frame);
+ frame_set_data(frame, (u8 *)udc->nullbuf);
+ frame_set_length(frame, 2);
+ frame_set_status(frame, FRAME_OK);
+ frame_set_info(frame, (ZLP | NO_CRC | infor));
+
+ return qe_ep_tx(ep, frame);
+}
+
+static int frame_create_tx(struct qe_ep *ep, struct qe_frame *frame)
+{
+ struct qe_req *req = ep->tx_req;
+ int reval;
+
+ if (req == NULL)
+ return -ENODEV;
+
+ if ((req->req.length - ep->sent) > 0)
+ reval = qe_usb_senddata(ep, frame);
+ else
+ reval = sendnulldata(ep, frame, 0);
+
+ return reval;
+}
+
+/* if direction is DIR_IN, the status is Device->Host
+ * if direction is DIR_OUT, the status transaction is Device<-Host
+ * in status phase, udc create a request and gain status */
+static int ep0_prime_status(struct qe_udc *udc, int direction)
+{
+
+ struct qe_ep *ep = &udc->eps[0];
+
+ if (direction == USB_DIR_IN) {
+ udc->ep0_state = DATA_STATE_NEED_ZLP;
+ udc->ep0_dir = USB_DIR_IN;
+ sendnulldata(ep, ep->txframe, SETUP_STATUS | NO_REQ);
+ } else {
+ udc->ep0_dir = USB_DIR_OUT;
+ udc->ep0_state = WAIT_FOR_OUT_STATUS;
+ }
+
+ return 0;
+}
+
+/* a request complete in ep0, whether gadget request or udc request */
+static void ep0_req_complete(struct qe_udc *udc, struct qe_req *req)
+{
+ struct qe_ep *ep = &udc->eps[0];
+ /* because usb and ep's status already been set in ch9setaddress() */
+
+ switch (udc->ep0_state) {
+ case DATA_STATE_XMIT:
+ done(ep, req, 0);
+ /* receive status phase */
+ if (ep0_prime_status(udc, USB_DIR_OUT))
+ qe_ep0_stall(udc);
+ break;
+
+ case DATA_STATE_NEED_ZLP:
+ done(ep, req, 0);
+ udc->ep0_state = WAIT_FOR_SETUP;
+ break;
+
+ case DATA_STATE_RECV:
+ done(ep, req, 0);
+ /* send status phase */
+ if (ep0_prime_status(udc, USB_DIR_IN))
+ qe_ep0_stall(udc);
+ break;
+
+ case WAIT_FOR_OUT_STATUS:
+ done(ep, req, 0);
+ udc->ep0_state = WAIT_FOR_SETUP;
+ break;
+
+ case WAIT_FOR_SETUP:
+ dev_vdbg(udc->dev, "Unexpected interrupt\n");
+ break;
+
+ default:
+ qe_ep0_stall(udc);
+ break;
+ }
+}
+
+static int ep0_txcomplete(struct qe_ep *ep, unsigned char restart)
+{
+ struct qe_req *tx_req = NULL;
+ struct qe_frame *frame = ep->txframe;
+
+ if ((frame_get_info(frame) & (ZLP | NO_REQ)) == (ZLP | NO_REQ)) {
+ if (!restart)
+ ep->udc->ep0_state = WAIT_FOR_SETUP;
+ else
+ sendnulldata(ep, ep->txframe, SETUP_STATUS | NO_REQ);
+ return 0;
+ }
+
+ tx_req = ep->tx_req;
+ if (tx_req != NULL) {
+ if (!restart) {
+ int asent = ep->last;
+ ep->sent += asent;
+ ep->last -= asent;
+ } else {
+ ep->last = 0;
+ }
+
+ /* a request already were transmitted completely */
+ if ((ep->tx_req->req.length - ep->sent) <= 0) {
+ ep->tx_req->req.actual = (unsigned int)ep->sent;
+ ep0_req_complete(ep->udc, ep->tx_req);
+ ep->tx_req = NULL;
+ ep->last = 0;
+ ep->sent = 0;
+ }
+ } else {
+ dev_vdbg(ep->udc->dev, "the ep0_controller have no req\n");
+ }
+
+ return 0;
+}
+
+static int ep0_txframe_handle(struct qe_ep *ep)
+{
+ /* if have error, transmit again */
+ if (frame_get_status(ep->txframe) & FRAME_ERROR) {
+ qe_ep_flushtxfifo(ep);
+ dev_vdbg(ep->udc->dev, "The EP0 transmit data have error!\n");
+ if (frame_get_info(ep->txframe) & PID_DATA0)
+ ep->data01 = 0;
+ else
+ ep->data01 = 1;
+
+ ep0_txcomplete(ep, 1);
+ } else
+ ep0_txcomplete(ep, 0);
+
+ frame_create_tx(ep, ep->txframe);
+ return 0;
+}
+
+static int qe_ep0_txconf(struct qe_ep *ep)
+{
+ struct qe_bd __iomem *bd;
+ struct qe_frame *pframe;
+ u32 bdstatus;
+
+ bd = ep->c_txbd;
+ bdstatus = in_be32((u32 __iomem *)bd);
+ while (!(bdstatus & T_R) && (bdstatus & ~T_W)) {
+ pframe = ep->txframe;
+
+ /* clear and recycle the BD */
+ out_be32((u32 __iomem *)bd, bdstatus & T_W);
+ out_be32(&bd->buf, 0);
+ if (bdstatus & T_W)
+ ep->c_txbd = ep->txbase;
+ else
+ ep->c_txbd++;
+
+ if (ep->c_txbd == ep->n_txbd) {
+ if (bdstatus & DEVICE_T_ERROR) {
+ frame_set_status(pframe, FRAME_ERROR);
+ if (bdstatus & T_TO)
+ pframe->status |= TX_ER_TIMEOUT;
+ if (bdstatus & T_UN)
+ pframe->status |= TX_ER_UNDERUN;
+ }
+ ep0_txframe_handle(ep);
+ }
+
+ bd = ep->c_txbd;
+ bdstatus = in_be32((u32 __iomem *)bd);
+ }
+
+ return 0;
+}
+
+static int ep_txframe_handle(struct qe_ep *ep)
+{
+ if (frame_get_status(ep->txframe) & FRAME_ERROR) {
+ qe_ep_flushtxfifo(ep);
+ dev_vdbg(ep->udc->dev, "The EP0 transmit data have error!\n");
+ if (frame_get_info(ep->txframe) & PID_DATA0)
+ ep->data01 = 0;
+ else
+ ep->data01 = 1;
+
+ txcomplete(ep, 1);
+ } else
+ txcomplete(ep, 0);
+
+ frame_create_tx(ep, ep->txframe); /* send the data */
+ return 0;
+}
+
+/* confirm the already trainsmited bd */
+static int qe_ep_txconf(struct qe_ep *ep)
+{
+ struct qe_bd __iomem *bd;
+ struct qe_frame *pframe = NULL;
+ u32 bdstatus;
+ unsigned char breakonrxinterrupt = 0;
+
+ bd = ep->c_txbd;
+ bdstatus = in_be32((u32 __iomem *)bd);
+ while (!(bdstatus & T_R) && (bdstatus & ~T_W)) {
+ pframe = ep->txframe;
+ if (bdstatus & DEVICE_T_ERROR) {
+ frame_set_status(pframe, FRAME_ERROR);
+ if (bdstatus & T_TO)
+ pframe->status |= TX_ER_TIMEOUT;
+ if (bdstatus & T_UN)
+ pframe->status |= TX_ER_UNDERUN;
+ }
+
+ /* clear and recycle the BD */
+ out_be32((u32 __iomem *)bd, bdstatus & T_W);
+ out_be32(&bd->buf, 0);
+ if (bdstatus & T_W)
+ ep->c_txbd = ep->txbase;
+ else
+ ep->c_txbd++;
+
+ /* handle the tx frame */
+ ep_txframe_handle(ep);
+ bd = ep->c_txbd;
+ bdstatus = in_be32((u32 __iomem *)bd);
+ }
+ if (breakonrxinterrupt)
+ return -EIO;
+ else
+ return 0;
+}
+
+/* Add a request in queue, and try to transmit a packet */
+static int ep_req_send(struct qe_ep *ep, struct qe_req *req)
+{
+ int reval = 0;
+
+ if (ep->tx_req == NULL) {
+ ep->sent = 0;
+ ep->last = 0;
+ txcomplete(ep, 0); /* can gain a new tx_req */
+ reval = frame_create_tx(ep, ep->txframe);
+ }
+ return reval;
+}
+
+/* Maybe this is a good ideal */
+static int ep_req_rx(struct qe_ep *ep, struct qe_req *req)
+{
+ struct qe_udc *udc = ep->udc;
+ struct qe_frame *pframe = NULL;
+ struct qe_bd __iomem *bd;
+ u32 bdstatus, length;
+ u32 vaddr, fsize;
+ u8 *cp;
+ u8 finish_req = 0;
+ u8 framepid;
+
+ if (list_empty(&ep->queue)) {
+ dev_vdbg(udc->dev, "the req already finish!\n");
+ return 0;
+ }
+ pframe = ep->rxframe;
+
+ bd = ep->n_rxbd;
+ bdstatus = in_be32((u32 __iomem *)bd);
+ length = bdstatus & BD_LENGTH_MASK;
+
+ while (!(bdstatus & R_E) && length) {
+ if (finish_req)
+ break;
+ if ((bdstatus & R_F) && (bdstatus & R_L)
+ && !(bdstatus & R_ERROR)) {
+ qe_frame_clean(pframe);
+ vaddr = (u32)phys_to_virt(in_be32(&bd->buf));
+ frame_set_data(pframe, (u8 *)vaddr);
+ frame_set_length(pframe, (length - USB_CRC_SIZE));
+ frame_set_status(pframe, FRAME_OK);
+ switch (bdstatus & R_PID) {
+ case R_PID_DATA1:
+ frame_set_info(pframe, PID_DATA1); break;
+ default:
+ frame_set_info(pframe, PID_DATA0); break;
+ }
+ /* handle the rx frame */
+
+ if (frame_get_info(pframe) & PID_DATA1)
+ framepid = 0x1;
+ else
+ framepid = 0;
+
+ if (framepid != ep->data01) {
+ dev_vdbg(udc->dev, "the data01 error!\n");
+ } else {
+ fsize = frame_get_length(pframe);
+
+ cp = (u8 *)(req->req.buf) + req->req.actual;
+ if (cp) {
+ memcpy(cp, pframe->data, fsize);
+ req->req.actual += fsize;
+ if ((fsize < ep->ep.maxpacket)
+ || (req->req.actual >=
+ req->req.length)) {
+ finish_req = 1;
+ done(ep, req, 0);
+ if (list_empty(&ep->queue))
+ qe_eprx_nack(ep);
+ }
+ }
+ qe_ep_toggledata01(ep);
+ }
+ } else {
+ dev_err(udc->dev, "The receive frame with error!\n");
+ }
+
+ /* note: don't clear the rxbd's buffer address *
+ * only Clear the length */
+ out_be32((u32 __iomem *)bd, (bdstatus & BD_STATUS_MASK));
+ ep->has_data--;
+
+ /* Get next BD */
+ if (bdstatus & R_W)
+ bd = ep->rxbase;
+ else
+ bd++;
+
+ bdstatus = in_be32((u32 __iomem *)bd);
+ length = bdstatus & BD_LENGTH_MASK;
+ }
+
+ ep->n_rxbd = bd;
+ ep_recycle_rxbds(ep);
+
+ return 0;
+}
+
+/* only add the request in queue */
+static int ep_req_receive(struct qe_ep *ep, struct qe_req *req)
+{
+ if (ep->state == EP_STATE_NACK) {
+ if (ep->has_data <= 0) {
+ /* Enable rx and unmask rx interrupt */
+ qe_eprx_normal(ep);
+ } else {
+ /* Copy the exist BD data */
+ ep_req_rx(ep, req);
+ }
+ }
+
+ return 0;
+}
+
+/********************************************************************
+ Internal Used Function End
+********************************************************************/
+
+/*-----------------------------------------------------------------------
+ Endpoint Management Functions For Gadget
+ -----------------------------------------------------------------------*/
+static int qe_ep_enable(struct usb_ep *_ep,
+ const struct usb_endpoint_descriptor *desc)
+{
+ struct qe_udc *udc;
+ struct qe_ep *ep;
+ int retval = 0;
+ unsigned char epnum;
+
+ ep = container_of(_ep, struct qe_ep, ep);
+
+ /* catch various bogus parameters */
+ if (!_ep || !desc || ep->desc || _ep->name == ep_name[0] ||
+ (desc->bDescriptorType != USB_DT_ENDPOINT))
+ return -EINVAL;
+
+ udc = ep->udc;
+ if (!udc->driver || (udc->gadget.speed == USB_SPEED_UNKNOWN))
+ return -ESHUTDOWN;
+
+ epnum = (u8)desc->bEndpointAddress & 0xF;
+
+ retval = qe_ep_init(udc, epnum, desc);
+ if (retval != 0) {
+ cpm_muram_free(cpm_muram_offset(ep->rxbase));
+ dev_dbg(udc->dev, "enable ep%d failed\n", ep->epnum);
+ return -EINVAL;
+ }
+ dev_dbg(udc->dev, "enable ep%d successful\n", ep->epnum);
+ return 0;
+}
+
+static int qe_ep_disable(struct usb_ep *_ep)
+{
+ struct qe_udc *udc;
+ struct qe_ep *ep;
+ unsigned long flags;
+ unsigned int size;
+
+ ep = container_of(_ep, struct qe_ep, ep);
+ udc = ep->udc;
+
+ if (!_ep || !ep->desc) {
+ dev_dbg(udc->dev, "%s not enabled\n", _ep ? ep->ep.name : NULL);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&udc->lock, flags);
+ /* Nuke all pending requests (does flush) */
+ nuke(ep, -ESHUTDOWN);
+ ep->desc = NULL;
+ ep->stopped = 1;
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ cpm_muram_free(cpm_muram_offset(ep->rxbase));
+
+ if (ep->dir == USB_DIR_OUT)
+ size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) *
+ (USB_BDRING_LEN_RX + 1);
+ else
+ size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) *
+ (USB_BDRING_LEN + 1);
+
+ if (ep->dir != USB_DIR_IN) {
+ kfree(ep->rxframe);
+ if (ep->rxbufmap) {
+ dma_unmap_single(udc_controller->gadget.dev.parent,
+ ep->rxbuf_d, size,
+ DMA_FROM_DEVICE);
+ ep->rxbuf_d = DMA_ADDR_INVALID;
+ } else {
+ dma_sync_single_for_cpu(
+ udc_controller->gadget.dev.parent,
+ ep->rxbuf_d, size,
+ DMA_FROM_DEVICE);
+ }
+ kfree(ep->rxbuffer);
+ }
+
+ if (ep->dir != USB_DIR_OUT)
+ kfree(ep->txframe);
+
+ dev_dbg(udc->dev, "disabled %s OK\n", _ep->name);
+ return 0;
+}
+
+static struct usb_request *qe_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
+{
+ struct qe_req *req;
+
+ req = kzalloc(sizeof(*req), gfp_flags);
+ if (!req)
+ return NULL;
+
+ req->req.dma = DMA_ADDR_INVALID;
+
+ INIT_LIST_HEAD(&req->queue);
+
+ return &req->req;
+}
+
+static void qe_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct qe_req *req;
+
+ req = container_of(_req, struct qe_req, req);
+
+ if (_req)
+ kfree(req);
+}
+
+/* queues (submits) an I/O request to an endpoint */
+static int qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
+ gfp_t gfp_flags)
+{
+ struct qe_ep *ep = container_of(_ep, struct qe_ep, ep);
+ struct qe_req *req = container_of(_req, struct qe_req, req);
+ struct qe_udc *udc;
+ unsigned long flags;
+ int reval;
+
+ udc = ep->udc;
+ /* catch various bogus parameters */
+ if (!_req || !req->req.complete || !req->req.buf
+ || !list_empty(&req->queue)) {
+ dev_dbg(udc->dev, "bad params\n");
+ return -EINVAL;
+ }
+ if (!_ep || (!ep->desc && ep_index(ep))) {
+ dev_dbg(udc->dev, "bad ep\n");
+ return -EINVAL;
+ }
+
+ if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
+ return -ESHUTDOWN;
+
+ req->ep = ep;
+
+ /* map virtual address to hardware */
+ if (req->req.dma == DMA_ADDR_INVALID) {
+ req->req.dma = dma_map_single(ep->udc->gadget.dev.parent,
+ req->req.buf,
+ req->req.length,
+ ep_is_in(ep)
+ ? DMA_TO_DEVICE :
+ DMA_FROM_DEVICE);
+ req->mapped = 1;
+ } else {
+ dma_sync_single_for_device(ep->udc->gadget.dev.parent,
+ req->req.dma, req->req.length,
+ ep_is_in(ep)
+ ? DMA_TO_DEVICE :
+ DMA_FROM_DEVICE);
+ req->mapped = 0;
+ }
+
+ req->req.status = -EINPROGRESS;
+ req->req.actual = 0;
+
+ list_add_tail(&req->queue, &ep->queue);
+ dev_vdbg(udc->dev, "gadget have request in %s! %d\n",
+ ep->name, req->req.length);
+ spin_lock_irqsave(&udc->lock, flags);
+ /* push the request to device */
+ if (ep_is_in(ep))
+ reval = ep_req_send(ep, req);
+
+ /* EP0 */
+ if (ep_index(ep) == 0 && req->req.length > 0) {
+ if (ep_is_in(ep))
+ udc->ep0_state = DATA_STATE_XMIT;
+ else
+ udc->ep0_state = DATA_STATE_RECV;
+ }
+
+ if (ep->dir == USB_DIR_OUT)
+ reval = ep_req_receive(ep, req);
+
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ return 0;
+}
+
+/* dequeues (cancels, unlinks) an I/O request from an endpoint */
+static int qe_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct qe_ep *ep = container_of(_ep, struct qe_ep, ep);
+ struct qe_req *req;
+ unsigned long flags;
+
+ if (!_ep || !_req)
+ return -EINVAL;
+
+ spin_lock_irqsave(&ep->udc->lock, flags);
+
+ /* make sure it's actually queued on this endpoint */
+ list_for_each_entry(req, &ep->queue, queue) {
+ if (&req->req == _req)
+ break;
+ }
+
+ if (&req->req != _req) {
+ spin_unlock_irqrestore(&ep->udc->lock, flags);
+ return -EINVAL;
+ }
+
+ done(ep, req, -ECONNRESET);
+
+ spin_unlock_irqrestore(&ep->udc->lock, flags);
+ return 0;
+}
+
+/*-----------------------------------------------------------------
+ * modify the endpoint halt feature
+ * @ep: the non-isochronous endpoint being stalled
+ * @value: 1--set halt 0--clear halt
+ * Returns zero, or a negative error code.
+*----------------------------------------------------------------*/
+static int qe_ep_set_halt(struct usb_ep *_ep, int value)
+{
+ struct qe_ep *ep;
+ unsigned long flags;
+ int status = -EOPNOTSUPP;
+ struct qe_udc *udc;
+
+ ep = container_of(_ep, struct qe_ep, ep);
+ if (!_ep || !ep->desc) {
+ status = -EINVAL;
+ goto out;
+ }
+
+ if (ep->epnum != 0) {
+ status = 0;
+ goto out;
+ }
+
+ udc = ep->udc;
+ /* Attempt to halt IN ep will fail if any transfer requests
+ * are still queue */
+ if (value && ep_is_in(ep) && !list_empty(&ep->queue)) {
+ status = -EAGAIN;
+ goto out;
+ }
+
+ status = 0;
+ spin_lock_irqsave(&ep->udc->lock, flags);
+ qe_eptx_stall_change(ep, value);
+ qe_eprx_stall_change(ep, value);
+ spin_unlock_irqrestore(&ep->udc->lock, flags);
+
+ if (ep->epnum == 0) {
+ udc->ep0_state = WAIT_FOR_SETUP;
+ udc->ep0_dir = 0;
+ }
+out:
+ dev_vdbg(udc->dev, " %s %s halt stat %d\n", ep->ep.name,
+ value ? "set" : "clear", status);
+
+ return status;
+}
+
+static struct usb_ep_ops qe_ep_ops = {
+ .enable = qe_ep_enable,
+ .disable = qe_ep_disable,
+
+ .alloc_request = qe_alloc_request,
+ .free_request = qe_free_request,
+
+ .queue = qe_ep_queue,
+ .dequeue = qe_ep_dequeue,
+
+ .set_halt = qe_ep_set_halt,
+};
+
+/*------------------------------------------------------------------------
+ Gadget Driver Layer Operations
+ ------------------------------------------------------------------------*/
+
+/* Get the current frame number */
+static int qe_get_frame(struct usb_gadget *gadget)
+{
+ u16 tmp;
+
+ tmp = in_be16(&udc_controller->usb_param->frame_n);
+ if (tmp & 0x8000)
+ tmp = tmp & 0x07ff;
+ else
+ tmp = -EINVAL;
+
+ return (int)tmp;
+}
+
+/* Tries to wake up the host connected to this gadget
+ *
+ * Return : 0-success
+ * Negative-this feature not enabled by host or not supported by device hw
+ */
+static int qe_wakeup(struct usb_gadget *gadget)
+{
+ return -ENOTSUPP;
+}
+
+/* Notify controller that VBUS is powered, Called by whatever
+ detects VBUS sessions */
+static int qe_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+ return -ENOTSUPP;
+}
+
+/* constrain controller's VBUS power usage
+ * This call is used by gadget drivers during SET_CONFIGURATION calls,
+ * reporting how much power the device may consume. For example, this
+ * could affect how quickly batteries are recharged.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static int qe_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+ return -ENOTSUPP;
+}
+
+/* Change Data+ pullup status
+ * this func is used by usb_gadget_connect/disconnect
+ */
+static int qe_pullup(struct usb_gadget *gadget, int is_on)
+{
+ return -ENOTSUPP;
+}
+
+/* defined in usb_gadget.h */
+static struct usb_gadget_ops qe_gadget_ops = {
+ .get_frame = qe_get_frame,
+ .wakeup = qe_wakeup,
+/* .set_selfpowered = qe_set_selfpowered,*/ /* always selfpowered */
+ .vbus_session = qe_vbus_session,
+ .vbus_draw = qe_vbus_draw,
+ .pullup = qe_pullup,
+};
+
+/*-------------------------------------------------------------------------
+ USB ep0 Setup process in BUS Enumeration
+ -------------------------------------------------------------------------*/
+static int udc_reset_ep_queue(struct qe_udc *udc, u8 pipe)
+{
+ struct qe_ep *ep = &udc->eps[pipe];
+
+ nuke(ep, -ECONNRESET);
+ ep->tx_req = NULL;
+ return 0;
+}
+
+static int reset_queues(struct qe_udc *udc)
+{
+ u8 pipe;
+
+ for (pipe = 0; pipe < USB_MAX_ENDPOINTS; pipe++)
+ udc_reset_ep_queue(udc, pipe);
+
+ /* report disconnect; the driver is already quiesced */
+ spin_unlock(&udc->lock);
+ udc->driver->disconnect(&udc->gadget);
+ spin_lock(&udc->lock);
+
+ return 0;
+}
+
+static void ch9setaddress(struct qe_udc *udc, u16 value, u16 index,
+ u16 length)
+{
+ /* Save the new address to device struct */
+ udc->device_address = (u8) value;
+ /* Update usb state */
+ udc->usb_state = USB_STATE_ADDRESS;
+
+ /* Status phase , send a ZLP */
+ if (ep0_prime_status(udc, USB_DIR_IN))
+ qe_ep0_stall(udc);
+}
+
+static void ownercomplete(struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct qe_req *req = container_of(_req, struct qe_req, req);
+
+ req->req.buf = NULL;
+ kfree(req);
+}
+
+static void ch9getstatus(struct qe_udc *udc, u16 value, u16 index,
+ u16 length)
+{
+ u16 usb_status = 0; /* fix me to give correct status */
+
+ struct qe_req *req;
+ struct qe_ep *ep;
+ int status = 0;
+
+ ep = &udc->eps[0];
+
+ req = container_of(qe_alloc_request(&ep->ep, GFP_KERNEL),
+ struct qe_req, req);
+ req->req.length = 2;
+ req->req.buf = udc->nullbuf;
+ memcpy(req->req.buf, (u8 *)&usb_status, 2);
+ req->req.status = -EINPROGRESS;
+ req->req.actual = 0;
+ req->req.complete = ownercomplete;
+
+ udc->ep0_dir = USB_DIR_IN;
+
+ /* data phase */
+ status = qe_ep_queue(&ep->ep, &req->req, GFP_ATOMIC);
+
+ if (status) {
+ dev_err(udc->dev, "Can't respond to getstatus request \n");
+ qe_ep0_stall(udc);
+ }
+}
+
+/* only handle the setup request, suppose the device in normal status */
+static void setup_received_handle(struct qe_udc *udc,
+ struct usb_ctrlrequest *setup)
+{
+ /* Fix Endian (udc->local_setup_buff is cpu Endian now)*/
+ u16 wValue = le16_to_cpu(setup->wValue);
+ u16 wIndex = le16_to_cpu(setup->wIndex);
+ u16 wLength = le16_to_cpu(setup->wLength);
+
+ /* clear the previous request in the ep0 */
+ udc_reset_ep_queue(udc, 0);
+
+ if (setup->bRequestType & USB_DIR_IN)
+ udc->ep0_dir = USB_DIR_IN;
+ else
+ udc->ep0_dir = USB_DIR_OUT;
+
+ switch (setup->bRequest) {
+ case USB_REQ_GET_STATUS:
+ /* Data+Status phase form udc */
+ if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK))
+ != (USB_DIR_IN | USB_TYPE_STANDARD))
+ break;
+ ch9getstatus(udc, wValue, wIndex, wLength);
+ return;
+
+ case USB_REQ_SET_ADDRESS:
+ /* Status phase from udc */
+ if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD |
+ USB_RECIP_DEVICE))
+ break;
+ ch9setaddress(udc, wValue, wIndex, wLength);
+ return;
+
+ case USB_REQ_CLEAR_FEATURE:
+ case USB_REQ_SET_FEATURE:
+ /* Requests with no data phase, status phase from udc */
+ if ((setup->bRequestType & USB_TYPE_MASK)
+ != USB_TYPE_STANDARD)
+ break;
+
+ if ((setup->bRequestType & USB_RECIP_MASK)
+ == USB_RECIP_ENDPOINT) {
+ int pipe = wIndex & USB_ENDPOINT_NUMBER_MASK;
+ struct qe_ep *ep;
+
+ if (wValue != 0 || wLength != 0
+ || pipe > USB_MAX_ENDPOINTS)
+ break;
+ ep = &udc->eps[pipe];
+
+ spin_unlock(&udc->lock);
+ qe_ep_set_halt(&ep->ep,
+ (setup->bRequest == USB_REQ_SET_FEATURE)
+ ? 1 : 0);
+ spin_lock(&udc->lock);
+ }
+
+ ep0_prime_status(udc, USB_DIR_IN);
+
+ return;
+
+ default:
+ break;
+ }
+
+ if (wLength) {
+ /* Data phase from gadget, status phase from udc */
+ if (setup->bRequestType & USB_DIR_IN) {
+ udc->ep0_state = DATA_STATE_XMIT;
+ udc->ep0_dir = USB_DIR_IN;
+ } else{
+ udc->ep0_state = DATA_STATE_RECV;
+ udc->ep0_dir = USB_DIR_OUT;
+ }
+ spin_unlock(&udc->lock);
+ if (udc->driver->setup(&udc->gadget,
+ &udc->local_setup_buff) < 0)
+ qe_ep0_stall(udc);
+ spin_lock(&udc->lock);
+ } else {
+ /* No data phase, IN status from gadget */
+ udc->ep0_dir = USB_DIR_IN;
+ spin_unlock(&udc->lock);
+ if (udc->driver->setup(&udc->gadget,
+ &udc->local_setup_buff) < 0)
+ qe_ep0_stall(udc);
+ spin_lock(&udc->lock);
+ udc->ep0_state = DATA_STATE_NEED_ZLP;
+ }
+}
+
+/*-------------------------------------------------------------------------
+ USB Interrupt handlers
+ -------------------------------------------------------------------------*/
+static void suspend_irq(struct qe_udc *udc)
+{
+ udc->resume_state = udc->usb_state;
+ udc->usb_state = USB_STATE_SUSPENDED;
+
+ /* report suspend to the driver ,serial.c not support this*/
+ if (udc->driver->suspend)
+ udc->driver->suspend(&udc->gadget);
+}
+
+static void resume_irq(struct qe_udc *udc)
+{
+ udc->usb_state = udc->resume_state;
+ udc->resume_state = 0;
+
+ /* report resume to the driver , serial.c not support this*/
+ if (udc->driver->resume)
+ udc->driver->resume(&udc->gadget);
+}
+
+static void idle_irq(struct qe_udc *udc)
+{
+ u8 usbs;
+
+ usbs = in_8(&udc->usb_regs->usb_usbs);
+ if (usbs & USB_IDLE_STATUS_MASK) {
+ if ((udc->usb_state) != USB_STATE_SUSPENDED)
+ suspend_irq(udc);
+ } else {
+ if (udc->usb_state == USB_STATE_SUSPENDED)
+ resume_irq(udc);
+ }
+}
+
+static int reset_irq(struct qe_udc *udc)
+{
+ unsigned char i;
+
+ qe_usb_disable();
+ out_8(&udc->usb_regs->usb_usadr, 0);
+
+ for (i = 0; i < USB_MAX_ENDPOINTS; i++) {
+ if (udc->eps[i].init)
+ qe_ep_reset(udc, i);
+ }
+
+ reset_queues(udc);
+ udc->usb_state = USB_STATE_DEFAULT;
+ udc->ep0_state = WAIT_FOR_SETUP;
+ udc->ep0_dir = USB_DIR_OUT;
+ qe_usb_enable();
+ return 0;
+}
+
+static int bsy_irq(struct qe_udc *udc)
+{
+ return 0;
+}
+
+static int txe_irq(struct qe_udc *udc)
+{
+ return 0;
+}
+
+/* ep0 tx interrupt also in here */
+static int tx_irq(struct qe_udc *udc)
+{
+ struct qe_ep *ep;
+ struct qe_bd __iomem *bd;
+ int i, res = 0;
+
+ if ((udc->usb_state == USB_STATE_ADDRESS)
+ && (in_8(&udc->usb_regs->usb_usadr) == 0))
+ out_8(&udc->usb_regs->usb_usadr, udc->device_address);
+
+ for (i = (USB_MAX_ENDPOINTS-1); ((i >= 0) && (res == 0)); i--) {
+ ep = &udc->eps[i];
+ if (ep && ep->init && (ep->dir != USB_DIR_OUT)) {
+ bd = ep->c_txbd;
+ if (!(in_be32((u32 __iomem *)bd) & T_R)
+ && (in_be32(&bd->buf))) {
+ /* Disable the TX Interrupt */
+ /*confirm the transmitted bd*/
+ if (ep->epnum == 0)
+ res = qe_ep0_txconf(ep);
+ else
+ res = qe_ep_txconf(ep);
+ /* Enable the TX Interrupt */
+ }
+ }
+ }
+ return res;
+}
+
+
+/* setup packect's rx is handle in the function too */
+static void rx_irq(struct qe_udc *udc)
+{
+ struct qe_ep *ep;
+ struct qe_bd __iomem *bd;
+ int i;
+
+ for (i = 0; i < USB_MAX_ENDPOINTS; i++) {
+ ep = &udc->eps[i];
+ if (ep && ep->init && (ep->dir != USB_DIR_IN)) {
+ bd = ep->n_rxbd;
+ if (!(in_be32((u32 __iomem *)bd) & R_E)
+ && (in_be32(&bd->buf))) {
+ if (ep->epnum == 0) {
+ qe_ep0_rx(udc);
+ } else {
+ /*non-setup package receive*/
+ qe_ep_rx(ep);
+ }
+ }
+ }
+ }
+}
+
+static irqreturn_t qe_udc_irq(int irq, void *_udc)
+{
+ struct qe_udc *udc = (struct qe_udc *)_udc;
+ u16 irq_src;
+ irqreturn_t status = IRQ_NONE;
+ unsigned long flags;
+
+
+ spin_lock_irqsave(&udc->lock, flags);
+
+ irq_src = in_be16(&udc->usb_regs->usb_usber) &
+ in_be16(&udc->usb_regs->usb_usbmr);
+ /* Clear notification bits */
+ out_be16(&udc->usb_regs->usb_usber, irq_src);
+ /* USB Interrupt */
+ if (irq_src & USB_E_IDLE_MASK) {
+ idle_irq(udc);
+ irq_src &= ~USB_E_IDLE_MASK;
+ status = IRQ_HANDLED;
+ }
+
+ if (irq_src & USB_E_TXB_MASK) {
+ tx_irq(udc);
+ irq_src &= ~USB_E_TXB_MASK;
+ status = IRQ_HANDLED;
+ }
+
+ if (irq_src & USB_E_RXB_MASK) {
+ rx_irq(udc);
+ irq_src &= ~USB_E_RXB_MASK;
+ status = IRQ_HANDLED;
+ }
+
+ if (irq_src & USB_E_RESET_MASK) {
+ reset_irq(udc);
+ irq_src &= ~USB_E_RESET_MASK;
+ status = IRQ_HANDLED;
+ }
+
+ if (irq_src & USB_E_BSY_MASK) {
+ bsy_irq(udc);
+ irq_src &= ~USB_E_BSY_MASK;
+ status = IRQ_HANDLED;
+ }
+
+ if (irq_src & USB_E_TXE_MASK) {
+ txe_irq(udc);
+ irq_src &= ~USB_E_TXE_MASK;
+ status = IRQ_HANDLED;
+ }
+
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ return status;
+}
+
+/*-------------------------------------------------------------------------
+ Gadget driver register and unregister.
+ --------------------------------------------------------------------------*/
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+ int retval;
+ unsigned long flags = 0;
+
+ /* standard operations */
+ if (!udc_controller)
+ return -ENODEV;
+
+ if (!driver || (driver->speed != USB_SPEED_FULL
+ && driver->speed != USB_SPEED_HIGH)
+ || !driver->bind || !driver->disconnect
+ || !driver->setup)
+ return -EINVAL;
+
+ if (udc_controller->driver)
+ return -EBUSY;
+
+ /* lock is needed but whether should use this lock or another */
+ spin_lock_irqsave(&udc_controller->lock, flags);
+
+ driver->driver.bus = NULL;
+ /* hook up the driver */
+ udc_controller->driver = driver;
+ udc_controller->gadget.dev.driver = &driver->driver;
+ udc_controller->gadget.speed = (enum usb_device_speed)(driver->speed);
+ spin_unlock_irqrestore(&udc_controller->lock, flags);
+
+ retval = driver->bind(&udc_controller->gadget);
+ if (retval) {
+ dev_err(udc_controller->dev, "bind to %s --> %d",
+ driver->driver.name, retval);
+ udc_controller->gadget.dev.driver = NULL;
+ udc_controller->driver = NULL;
+ return retval;
+ }
+
+ /* Enable IRQ reg and Set usbcmd reg EN bit */
+ qe_usb_enable();
+
+ out_be16(&udc_controller->usb_regs->usb_usber, 0xffff);
+ out_be16(&udc_controller->usb_regs->usb_usbmr, USB_E_DEFAULT_DEVICE);
+ udc_controller->usb_state = USB_STATE_ATTACHED;
+ udc_controller->ep0_state = WAIT_FOR_SETUP;
+ udc_controller->ep0_dir = USB_DIR_OUT;
+ dev_info(udc_controller->dev, "%s bind to driver %s \n",
+ udc_controller->gadget.name, driver->driver.name);
+ return 0;
+}
+EXPORT_SYMBOL(usb_gadget_register_driver);
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+ struct qe_ep *loop_ep;
+ unsigned long flags;
+
+ if (!udc_controller)
+ return -ENODEV;
+
+ if (!driver || driver != udc_controller->driver)
+ return -EINVAL;
+
+ /* stop usb controller, disable intr */
+ qe_usb_disable();
+
+ /* in fact, no needed */
+ udc_controller->usb_state = USB_STATE_ATTACHED;
+ udc_controller->ep0_state = WAIT_FOR_SETUP;
+ udc_controller->ep0_dir = 0;
+
+ /* stand operation */
+ spin_lock_irqsave(&udc_controller->lock, flags);
+ udc_controller->gadget.speed = USB_SPEED_UNKNOWN;
+ nuke(&udc_controller->eps[0], -ESHUTDOWN);
+ list_for_each_entry(loop_ep, &udc_controller->gadget.ep_list,
+ ep.ep_list)
+ nuke(loop_ep, -ESHUTDOWN);
+ spin_unlock_irqrestore(&udc_controller->lock, flags);
+
+ /* unbind gadget and unhook driver. */
+ driver->unbind(&udc_controller->gadget);
+ udc_controller->gadget.dev.driver = NULL;
+ udc_controller->driver = NULL;
+
+ dev_info(udc_controller->dev, "unregistered gadget driver '%s'\r\n",
+ driver->driver.name);
+ return 0;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+/* udc structure's alloc and setup, include ep-param alloc */
+static struct qe_udc __devinit *qe_udc_config(struct of_device *ofdev)
+{
+ struct qe_udc *udc;
+ struct device_node *np = ofdev->node;
+ unsigned int tmp_addr = 0;
+ struct usb_device_para __iomem *usbpram;
+ unsigned int i;
+ u64 size;
+ u32 offset;
+
+ udc = kzalloc(sizeof(*udc), GFP_KERNEL);
+ if (udc == NULL) {
+ dev_err(&ofdev->dev, "malloc udc failed\n");
+ goto cleanup;
+ }
+
+ udc->dev = &ofdev->dev;
+
+ /* get default address of usb parameter in MURAM from device tree */
+ offset = *of_get_address(np, 1, &size, NULL);
+ udc->usb_param = cpm_muram_addr(offset);
+ memset_io(udc->usb_param, 0, size);
+
+ usbpram = udc->usb_param;
+ out_be16(&usbpram->frame_n, 0);
+ out_be32(&usbpram->rstate, 0);
+
+ tmp_addr = cpm_muram_alloc((USB_MAX_ENDPOINTS *
+ sizeof(struct usb_ep_para)),
+ USB_EP_PARA_ALIGNMENT);
+
+ for (i = 0; i < USB_MAX_ENDPOINTS; i++) {
+ out_be16(&usbpram->epptr[i], (u16)tmp_addr);
+ udc->ep_param[i] = cpm_muram_addr(tmp_addr);
+ tmp_addr += 32;
+ }
+
+ memset_io(udc->ep_param[0], 0,
+ USB_MAX_ENDPOINTS * sizeof(struct usb_ep_para));
+
+ udc->resume_state = USB_STATE_NOTATTACHED;
+ udc->usb_state = USB_STATE_POWERED;
+ udc->ep0_dir = 0;
+
+ spin_lock_init(&udc->lock);
+ return udc;
+
+cleanup:
+ kfree(udc);
+ return NULL;
+}
+
+/* USB Controller register init */
+static int __devinit qe_udc_reg_init(struct qe_udc *udc)
+{
+ struct usb_ctlr __iomem *qe_usbregs;
+ qe_usbregs = udc->usb_regs;
+
+ /* Init the usb register */
+ out_8(&qe_usbregs->usb_usmod, 0x01);
+ out_be16(&qe_usbregs->usb_usbmr, 0);
+ out_8(&qe_usbregs->usb_uscom, 0);
+ out_be16(&qe_usbregs->usb_usber, USBER_ALL_CLEAR);
+
+ return 0;
+}
+
+static int __devinit qe_ep_config(struct qe_udc *udc, unsigned char pipe_num)
+{
+ struct qe_ep *ep = &udc->eps[pipe_num];
+
+ ep->udc = udc;
+ strcpy(ep->name, ep_name[pipe_num]);
+ ep->ep.name = ep_name[pipe_num];
+
+ ep->ep.ops = &qe_ep_ops;
+ ep->stopped = 1;
+ ep->ep.maxpacket = (unsigned short) ~0;
+ ep->desc = NULL;
+ ep->dir = 0xff;
+ ep->epnum = (u8)pipe_num;
+ ep->sent = 0;
+ ep->last = 0;
+ ep->init = 0;
+ ep->rxframe = NULL;
+ ep->txframe = NULL;
+ ep->tx_req = NULL;
+ ep->state = EP_STATE_IDLE;
+ ep->has_data = 0;
+
+ /* the queue lists any req for this ep */
+ INIT_LIST_HEAD(&ep->queue);
+
+ /* gagdet.ep_list used for ep_autoconfig so no ep0*/
+ if (pipe_num != 0)
+ list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+
+ ep->gadget = &udc->gadget;
+
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * UDC device Driver operation functions *
+ *----------------------------------------------------------------------*/
+static void qe_udc_release(struct device *dev)
+{
+ int i = 0;
+
+ complete(udc_controller->done);
+ cpm_muram_free(cpm_muram_offset(udc_controller->ep_param[0]));
+ for (i = 0; i < USB_MAX_ENDPOINTS; i++)
+ udc_controller->ep_param[i] = NULL;
+
+ kfree(udc_controller);
+ udc_controller = NULL;
+}
+
+/* Driver probe functions */
+static int __devinit qe_udc_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
+{
+ struct device_node *np = ofdev->node;
+ struct qe_ep *ep;
+ unsigned int ret = 0;
+ unsigned int i;
+ const void *prop;
+
+ prop = of_get_property(np, "mode", NULL);
+ if (!prop || strcmp(prop, "peripheral"))
+ return -ENODEV;
+
+ /* Initialize the udc structure including QH member and other member */
+ udc_controller = qe_udc_config(ofdev);
+ if (!udc_controller) {
+ dev_dbg(&ofdev->dev, "udc_controll is NULL\n");
+ return -ENOMEM;
+ }
+
+ udc_controller->soc_type = (unsigned long)match->data;
+ udc_controller->usb_regs = of_iomap(np, 0);
+ if (!udc_controller->usb_regs) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+
+ /* initialize usb hw reg except for regs for EP,
+ * leave usbintr reg untouched*/
+ qe_udc_reg_init(udc_controller);
+
+ /* here comes the stand operations for probe
+ * set the qe_udc->gadget.xxx */
+ udc_controller->gadget.ops = &qe_gadget_ops;
+
+ /* gadget.ep0 is a pointer */
+ udc_controller->gadget.ep0 = &udc_controller->eps[0].ep;
+
+ INIT_LIST_HEAD(&udc_controller->gadget.ep_list);
+
+ /* modify in register gadget process */
+ udc_controller->gadget.speed = USB_SPEED_UNKNOWN;
+
+ /* name: Identifies the controller hardware type. */
+ udc_controller->gadget.name = driver_name;
+
+ device_initialize(&udc_controller->gadget.dev);
+
+ strcpy(udc_controller->gadget.dev.bus_id, "gadget");
+
+ udc_controller->gadget.dev.release = qe_udc_release;
+ udc_controller->gadget.dev.parent = &ofdev->dev;
+
+
+ /* EP:intialization qe_ep struct */
+ for (i = 0; i < USB_MAX_ENDPOINTS ; i++) {
+ /*because the ep type isn't decide here so
+ * qe_ep_init() should be called in ep_enable() */
+
+ /* setup the qe_ep struct and link ep.ep.list
+ * into gadget.ep_list */
+ qe_ep_config(udc_controller, (unsigned char)i);
+ }
+
+ /* ep0 initialization in here */
+ ret = qe_ep_init(udc_controller, 0, &qe_ep0_desc);
+ if (ret)
+ goto err2;
+
+ /* create a buf for ZLP send */
+ udc_controller->nullbuf = kzalloc(256, GFP_KERNEL);
+ if (udc_controller->nullbuf == NULL) {
+ dev_dbg(udc_controller->dev, "cannot alloc nullbuf\n");
+ ret = -ENOMEM;
+ goto err3;
+ }
+
+ udc_controller->nullp = virt_to_phys((void *)udc_controller->nullbuf);
+ if (udc_controller->nullp == DMA_ADDR_INVALID) {
+ udc_controller->nullp = dma_map_single(
+ udc_controller->gadget.dev.parent,
+ udc_controller->nullbuf,
+ 256,
+ DMA_TO_DEVICE);
+ udc_controller->nullmap = 1;
+ } else {
+ dma_sync_single_for_device(udc_controller->gadget.dev.parent,
+ udc_controller->nullp, 256,
+ DMA_TO_DEVICE);
+ }
+
+ tasklet_init(&udc_controller->rx_tasklet, ep_rx_tasklet,
+ (unsigned long)udc_controller);
+ /* request irq and disable DR */
+ udc_controller->usb_irq = irq_of_parse_and_map(np, 0);
+
+ ret = request_irq(udc_controller->usb_irq, qe_udc_irq, 0,
+ driver_name, udc_controller);
+ if (ret) {
+ dev_err(udc_controller->dev, "cannot request irq %d err %d \n",
+ udc_controller->usb_irq, ret);
+ goto err4;
+ }
+
+ ret = device_add(&udc_controller->gadget.dev);
+ if (ret)
+ goto err5;
+
+ dev_info(udc_controller->dev,
+ "QE/CPM USB controller initialized as device\n");
+ return 0;
+
+err5:
+ free_irq(udc_controller->usb_irq, udc_controller);
+err4:
+ if (udc_controller->nullmap) {
+ dma_unmap_single(udc_controller->gadget.dev.parent,
+ udc_controller->nullp, 256,
+ DMA_TO_DEVICE);
+ udc_controller->nullp = DMA_ADDR_INVALID;
+ } else {
+ dma_sync_single_for_cpu(udc_controller->gadget.dev.parent,
+ udc_controller->nullp, 256,
+ DMA_TO_DEVICE);
+ }
+ kfree(udc_controller->nullbuf);
+err3:
+ ep = &udc_controller->eps[0];
+ cpm_muram_free(cpm_muram_offset(ep->rxbase));
+ kfree(ep->rxframe);
+ kfree(ep->rxbuffer);
+ kfree(ep->txframe);
+err2:
+ iounmap(udc_controller->usb_regs);
+err1:
+ kfree(udc_controller);
+
+ return ret;
+}
+
+#ifdef CONFIG_PM
+static int qe_udc_suspend(struct of_device *dev, pm_message_t state)
+{
+ return -ENOTSUPP;
+}
+
+static int qe_udc_resume(struct of_device *dev)
+{
+ return -ENOTSUPP;
+}
+#endif
+
+static int __devexit qe_udc_remove(struct of_device *ofdev)
+{
+ struct qe_ep *ep;
+ unsigned int size;
+
+ DECLARE_COMPLETION(done);
+
+ if (!udc_controller)
+ return -ENODEV;
+
+ udc_controller->done = &done;
+ tasklet_disable(&udc_controller->rx_tasklet);
+
+ if (udc_controller->nullmap) {
+ dma_unmap_single(udc_controller->gadget.dev.parent,
+ udc_controller->nullp, 256,
+ DMA_TO_DEVICE);
+ udc_controller->nullp = DMA_ADDR_INVALID;
+ } else {
+ dma_sync_single_for_cpu(udc_controller->gadget.dev.parent,
+ udc_controller->nullp, 256,
+ DMA_TO_DEVICE);
+ }
+ kfree(udc_controller->nullbuf);
+
+ ep = &udc_controller->eps[0];
+ cpm_muram_free(cpm_muram_offset(ep->rxbase));
+ size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) * (USB_BDRING_LEN + 1);
+
+ kfree(ep->rxframe);
+ if (ep->rxbufmap) {
+ dma_unmap_single(udc_controller->gadget.dev.parent,
+ ep->rxbuf_d, size,
+ DMA_FROM_DEVICE);
+ ep->rxbuf_d = DMA_ADDR_INVALID;
+ } else {
+ dma_sync_single_for_cpu(udc_controller->gadget.dev.parent,
+ ep->rxbuf_d, size,
+ DMA_FROM_DEVICE);
+ }
+
+ kfree(ep->rxbuffer);
+ kfree(ep->txframe);
+
+ free_irq(udc_controller->usb_irq, udc_controller);
+
+ tasklet_kill(&udc_controller->rx_tasklet);
+
+ iounmap(udc_controller->usb_regs);
+
+ device_unregister(&udc_controller->gadget.dev);
+ /* wait for release() of gadget.dev to free udc */
+ wait_for_completion(&done);
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static struct of_device_id __devinitdata qe_udc_match[] = {
+ {
+ .compatible = "fsl,mpc8360-qe-usb",
+ .data = (void *)PORT_QE,
+ },
+ {
+ .compatible = "fsl,mpc8272-cpm-usb",
+ .data = (void *)PORT_CPM,
+ },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, qe_udc_match);
+
+static struct of_platform_driver udc_driver = {
+ .name = (char *)driver_name,
+ .match_table = qe_udc_match,
+ .probe = qe_udc_probe,
+ .remove = __devexit_p(qe_udc_remove),
+#ifdef CONFIG_PM
+ .suspend = qe_udc_suspend,
+ .resume = qe_udc_resume,
+#endif
+};
+
+static int __init qe_udc_init(void)
+{
+ printk(KERN_INFO "%s: %s, %s\n", driver_name, driver_desc,
+ DRIVER_VERSION);
+ return of_register_platform_driver(&udc_driver);
+}
+
+static void __exit qe_udc_exit(void)
+{
+ of_unregister_platform_driver(&udc_driver);
+}
+
+module_init(qe_udc_init);
+module_exit(qe_udc_exit);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
+
projects / linux-2.6-omap-h63xx.git / commitdiff