return (ip->status & ISI_DCD)?1 : 0;
}
-static int block_til_ready(struct tty_struct *tty, struct file *filp,
- struct isi_port *ip)
-{
- struct tty_port *port = &ip->port;
- int do_clocal = 0, retval;
- unsigned long flags;
- DECLARE_WAITQUEUE(wait, current);
- int cd;
-
- /* block if port is in the process of being closed */
-
- if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
- pr_dbg("block_til_ready: close in progress.\n");
- interruptible_sleep_on(&port->close_wait);
- if (port->flags & ASYNC_HUP_NOTIFY)
- return -EAGAIN;
- else
- return -ERESTARTSYS;
- }
-
- /* if non-blocking mode is set ... */
-
- if ((filp->f_flags & O_NONBLOCK) ||
- (tty->flags & (1 << TTY_IO_ERROR))) {
- pr_dbg("block_til_ready: non-block mode.\n");
- port->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
- }
-
- if (C_CLOCAL(tty))
- do_clocal = 1;
-
- /* block waiting for DCD to be asserted, and while
- callout dev is busy */
- retval = 0;
- add_wait_queue(&port->open_wait, &wait);
-
- spin_lock_irqsave(&port->lock, flags);
- if (!tty_hung_up_p(filp))
- port->count--;
- port->blocked_open++;
- spin_unlock_irqrestore(&port->lock, flags);
-
- while (1) {
- tty_port_raise_dtr_rts(port);
-
- set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) {
- if (port->flags & ASYNC_HUP_NOTIFY)
- retval = -EAGAIN;
- else
- retval = -ERESTARTSYS;
- break;
- }
- cd = tty_port_carrier_raised(port);
- if (!(port->flags & ASYNC_CLOSING) &&
- (do_clocal || cd))
- break;
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
- schedule();
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->open_wait, &wait);
- spin_lock_irqsave(&port->lock, flags);
- if (!tty_hung_up_p(filp))
- port->count++;
- port->blocked_open--;
- if (retval == 0)
- port->flags |= ASYNC_NORMAL_ACTIVE;
- spin_unlock_irqrestore(&port->lock, flags);
- return 0;
-}
-
static int isicom_open(struct tty_struct *tty, struct file *filp)
{
struct isi_port *port;
isicom_setup_board(card);
+ /* FIXME: locking on port.count etc */
port->port.count++;
tty->driver_data = port;
tty_port_tty_set(&port->port, tty);
error = isicom_setup_port(tty);
if (error == 0)
- error = block_til_ready(tty, filp, port);
+ error = tty_port_block_til_ready(&port->port, tty, filp);
return error;
}
spin_unlock_irqrestore(&mp->slock, flags);
}
-static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp,
- struct mxser_port *mp)
-{
- DECLARE_WAITQUEUE(wait, current);
- int retval;
- int do_clocal = 0;
- unsigned long flags;
- int cd;
- struct tty_port *port = &mp->port;
-
- /*
- * If non-blocking mode is set, or the port is not enabled,
- * then make the check up front and then exit.
- */
- if ((filp->f_flags & O_NONBLOCK) ||
- test_bit(TTY_IO_ERROR, &tty->flags)) {
- port->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
- }
-
- if (tty->termios->c_cflag & CLOCAL)
- do_clocal = 1;
-
- /*
- * Block waiting for the carrier detect and the line to become
- * free (i.e., not in use by the callout). While we are in
- * this loop, port->count is dropped by one, so that
- * mxser_close() knows when to free things. We restore it upon
- * exit, either normal or abnormal.
- */
- retval = 0;
- add_wait_queue(&port->open_wait, &wait);
-
- spin_lock_irqsave(&port->lock, flags);
- if (!tty_hung_up_p(filp))
- port->count--;
- port->blocked_open++;
- spin_unlock_irqrestore(&port->lock, flags);
- while (1) {
- tty_port_raise_dtr_rts(port);
- set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) {
- if (port->flags & ASYNC_HUP_NOTIFY)
- retval = -EAGAIN;
- else
- retval = -ERESTARTSYS;
- break;
- }
- cd = tty_port_carrier_raised(port);
- if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd))
- break;
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
- schedule();
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->open_wait, &wait);
- spin_lock_irqsave(&port->lock, flags);
- if (!tty_hung_up_p(filp))
- port->count++;
- port->blocked_open--;
- if (retval == 0)
- port->flags |= ASYNC_NORMAL_ACTIVE;
- spin_unlock_irqrestore(&port->lock, flags);
- return 0;
-}
-
static int mxser_set_baud(struct tty_struct *tty, long newspd)
{
struct mxser_port *info = tty->driver_data;
if (retval)
return retval;
- retval = mxser_block_til_ready(tty, filp, info);
+ retval = tty_port_block_til_ready(&info->port, tty, filp);
if (retval)
return retval;
return CD;
}
-static int block_til_ready(struct tty_struct *tty, struct file *filp,
- struct riscom_port *rp)
-{
- DECLARE_WAITQUEUE(wait, current);
- int retval;
- int do_clocal = 0;
- int CD;
- unsigned long flags;
- struct tty_port *port = &rp->port;
-
- /*
- * If the device is in the middle of being closed, then block
- * until it's done, and then try again.
- */
- if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
- interruptible_sleep_on(&port->close_wait);
- if (port->flags & ASYNC_HUP_NOTIFY)
- return -EAGAIN;
- else
- return -ERESTARTSYS;
- }
-
- /*
- * If non-blocking mode is set, or the port is not enabled,
- * then make the check up front and then exit.
- */
- if ((filp->f_flags & O_NONBLOCK) ||
- (tty->flags & (1 << TTY_IO_ERROR))) {
- port->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
- }
-
- if (C_CLOCAL(tty))
- do_clocal = 1;
-
- /*
- * Block waiting for the carrier detect and the line to become
- * free (i.e., not in use by the callout). While we are in
- * this loop, info->count is dropped by one, so that
- * rs_close() knows when to free things. We restore it upon
- * exit, either normal or abnormal.
- */
- retval = 0;
- add_wait_queue(&port->open_wait, &wait);
-
- spin_lock_irqsave(&port->lock, flags);
- if (!tty_hung_up_p(filp))
- port->count--;
- port->blocked_open++;
- spin_unlock_irqrestore(&port->lock, flags);
-
- while (1) {
-
- CD = tty_port_carrier_raised(port);
- set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) ||
- !(port->flags & ASYNC_INITIALIZED)) {
- if (port->flags & ASYNC_HUP_NOTIFY)
- retval = -EAGAIN;
- else
- retval = -ERESTARTSYS;
- break;
- }
- if (!(port->flags & ASYNC_CLOSING) &&
- (do_clocal || CD))
- break;
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
- schedule();
- }
- __set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->open_wait, &wait);
- spin_lock_irqsave(&port->lock, flags);
- if (!tty_hung_up_p(filp))
- port->count++;
- port->blocked_open--;
- if (retval == 0)
- port->flags |= ASYNC_NORMAL_ACTIVE;
- spin_unlock_irqrestore(&port->lock, flags);
- return 0;
-}
-
static int rc_open(struct tty_struct *tty, struct file *filp)
{
int board;
error = rc_setup_port(bp, port);
if (error == 0)
- error = block_til_ready(tty, filp, port);
+ error = tty_port_block_til_ready(&port->port, tty, filp);
return error;
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&port->open_wait, &wait);
+ /* FIXME: Racy on hangup during close wait */
if (extra_count)
port->count++;
port->blocked_open--;
port->ops->raise_dtr_rts(port);
}
EXPORT_SYMBOL(tty_port_raise_dtr_rts);
+
+/**
+ * tty_port_block_til_ready - Waiting logic for tty open
+ * @port: the tty port being opened
+ * @tty: the tty device being bound
+ * @filp: the file pointer of the opener
+ *
+ * Implement the core POSIX/SuS tty behaviour when opening a tty device.
+ * Handles:
+ * - hangup (both before and during)
+ * - non blocking open
+ * - rts/dtr/dcd
+ * - signals
+ * - port flags and counts
+ *
+ * The passed tty_port must implement the carrier_raised method if it can
+ * do carrier detect and the raise_dtr_rts method if it supports software
+ * management of these lines. Note that the dtr/rts raise is done each
+ * iteration as a hangup may have previously dropped them while we wait.
+ */
+
+int tty_port_block_til_ready(struct tty_port *port,
+ struct tty_struct *tty, struct file *filp)
+{
+ int do_clocal = 0, retval;
+ unsigned long flags;
+ DECLARE_WAITQUEUE(wait, current);
+ int cd;
+
+ /* block if port is in the process of being closed */
+ if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
+ interruptible_sleep_on(&port->close_wait);
+ if (port->flags & ASYNC_HUP_NOTIFY)
+ return -EAGAIN;
+ else
+ return -ERESTARTSYS;
+ }
+
+ /* if non-blocking mode is set we can pass directly to open unless
+ the port has just hung up or is in another error state */
+ if ((filp->f_flags & O_NONBLOCK) ||
+ (tty->flags & (1 << TTY_IO_ERROR))) {
+ port->flags |= ASYNC_NORMAL_ACTIVE;
+ return 0;
+ }
+
+ if (C_CLOCAL(tty))
+ do_clocal = 1;
+
+ /* Block waiting until we can proceed. We may need to wait for the
+ carrier, but we must also wait for any close that is in progress
+ before the next open may complete */
+
+ retval = 0;
+ add_wait_queue(&port->open_wait, &wait);
+
+ /* The port lock protects the port counts */
+ spin_lock_irqsave(&port->lock, flags);
+ if (!tty_hung_up_p(filp))
+ port->count--;
+ port->blocked_open++;
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ while (1) {
+ /* Indicate we are open */
+ tty_port_raise_dtr_rts(port);
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ /* Check for a hangup or uninitialised port. Return accordingly */
+ if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) {
+ if (port->flags & ASYNC_HUP_NOTIFY)
+ retval = -EAGAIN;
+ else
+ retval = -ERESTARTSYS;
+ break;
+ }
+ /* Probe the carrier. For devices with no carrier detect this
+ will always return true */
+ cd = tty_port_carrier_raised(port);
+ if (!(port->flags & ASYNC_CLOSING) &&
+ (do_clocal || cd))
+ break;
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ break;
+ }
+ schedule();
+ }
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&port->open_wait, &wait);
+
+ /* Update counts. A parallel hangup will have set count to zero and
+ we must not mess that up further */
+ spin_lock_irqsave(&port->lock, flags);
+ if (!tty_hung_up_p(filp))
+ port->count++;
+ port->blocked_open--;
+ if (retval == 0)
+ port->flags |= ASYNC_NORMAL_ACTIVE;
+ spin_unlock_irqrestore(&port->lock, flags);
+ return 0;
+
+}
+EXPORT_SYMBOL(tty_port_block_til_ready);
+
static int scc_carrier_raised(struct tty_port *port)
{
- struct scc_port *scc = container_of(port, struct scc_port, gs.port);
- unsigned channel = port->channel;
+ struct scc_port *sc = container_of(port, struct scc_port, gs.port);
+ unsigned channel = sc->channel;
return !!(scc_last_status_reg[channel] & SR_DCD);
}
struct scc_port *port = ptr;
port->gs.port.flags &= ~ GS_ACTIVE;
- if (port->gs.port.tty && port->gs.port.tty->termios->c_cflag & HUPCL) {
+ if (port->gs.port.tty && (port->gs.port.tty->termios->c_cflag & HUPCL)) {
scc_setsignals (port, 0, 0);
}
}
extern int tty_port_carrier_raised(struct tty_port *port);
extern void tty_port_raise_dtr_rts(struct tty_port *port);
extern void tty_port_hangup(struct tty_port *port);
+extern int tty_port_block_til_ready(struct tty_port *port,
+ struct tty_struct *tty, struct file *filp);
extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc);
extern int tty_unregister_ldisc(int disc);
projects / linux-2.6-omap-h63xx.git / commitdiff