{ USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_VARIAX) },
{ },
};
-MODULE_DEVICE_TABLE (usb, line6_id_table);
+MODULE_DEVICE_TABLE(usb, line6_id_table);
static struct line6_properties line6_properties_table[] = {
{ "BassPODxt", LINE6_BIT_BASSPODXT, LINE6_BIT_CONTROL_PCM },
/**
Class for asynchronous messages.
*/
-struct message
-{
+struct message {
struct usb_line6 *line6;
const char *buffer;
int size;
Forward declarations.
*/
static void line6_data_received(struct urb *urb);
-static int line6_send_raw_message_async_part(struct message *msg, struct urb *urb);
+static int line6_send_raw_message_async_part(struct message *msg,
+ struct urb *urb);
/*
*/
static int line6_start_listen(struct usb_line6 *line6)
{
- usb_fill_int_urb(line6->urb_listen,
- line6->usbdev,
- usb_rcvintpipe(line6->usbdev, line6->ep_control_read),
- line6->buffer_listen, LINE6_BUFSIZE_LISTEN,
- line6_data_received,
- line6,
- line6->interval);
+ usb_fill_int_urb(line6->urb_listen, line6->usbdev,
+ usb_rcvintpipe(line6->usbdev, line6->ep_control_read),
+ line6->buffer_listen, LINE6_BUFSIZE_LISTEN,
+ line6_data_received, line6, line6->interval);
line6->urb_listen->actual_length = 0;
return usb_submit_urb(line6->urb_listen, GFP_KERNEL);
}
/*
Write hexdump to syslog.
*/
-void line6_write_hexdump(struct usb_line6 *line6, char dir, const unsigned char *buffer, int size)
+void line6_write_hexdump(struct usb_line6 *line6, char dir,
+ const unsigned char *buffer, int size)
{
static const int BYTES_PER_LINE = 8;
char hexdump[100];
char asc[BYTES_PER_LINE + 1];
int i, j;
- for(i = 0; i < size; i += BYTES_PER_LINE) {
+ for (i = 0; i < size; i += BYTES_PER_LINE) {
int hexdumpsize = sizeof(hexdump);
char *p = hexdump;
int n = min(size - i, BYTES_PER_LINE);
asc[n] = 0;
- for(j = 0; j < BYTES_PER_LINE; ++j) {
+ for (j = 0; j < BYTES_PER_LINE; ++j) {
int bytes;
- if(j < n) {
+ if (j < n) {
unsigned char val = buffer[i + j];
bytes = snprintf(p, hexdumpsize, " %02X", val);
asc[j] = ((val >= 0x20) && (val < 0x7f)) ? val : '.';
- }
- else
+ } else
bytes = snprintf(p, hexdumpsize, " ");
- if(bytes > hexdumpsize)
+ if (bytes > hexdumpsize)
break; /* buffer overflow */
p += bytes;
{
struct usb_line6 *line6 = (struct usb_line6 *)urb->context;
- if(urb->status < 0)
+ if (urb->status < 0)
return;
- line6_write_hexdump(line6, 'R', (unsigned char *)urb->transfer_buffer, urb->actual_length);
+ line6_write_hexdump(line6, 'R', (unsigned char *)urb->transfer_buffer,
+ urb->actual_length);
}
#endif
/*
Send raw message in pieces of wMaxPacketSize bytes.
*/
-int line6_send_raw_message(struct usb_line6 *line6, const char *buffer, int size)
+int line6_send_raw_message(struct usb_line6 *line6, const char *buffer,
+ int size)
{
int i, done = 0;
line6_write_hexdump(line6, 'S', buffer, size);
#endif
- for(i = 0; i < size; i += line6->max_packet_size) {
+ for (i = 0; i < size; i += line6->max_packet_size) {
int partial;
const char *frag_buf = buffer + i;
int frag_size = min(line6->max_packet_size, size - i);
- int retval = usb_interrupt_msg(line6->usbdev,
- usb_sndintpipe(line6->usbdev, line6->ep_control_write),
- (char *)frag_buf, frag_size, &partial, LINE6_TIMEOUT * HZ);
+ int retval;
+
+ retval = usb_interrupt_msg(line6->usbdev,
+ usb_sndintpipe(line6->usbdev,
+ line6->ep_control_write),
+ (char *)frag_buf, frag_size,
+ &partial, LINE6_TIMEOUT * HZ);
- if(retval) {
- dev_err(line6->ifcdev, "usb_interrupt_msg failed (%d)\n", retval);
+ if (retval) {
+ dev_err(line6->ifcdev,
+ "usb_interrupt_msg failed (%d)\n", retval);
break;
}
{
struct message *msg = (struct message *)urb->context;
- if(msg->done >= msg->size) {
+ if (msg->done >= msg->size) {
usb_free_urb(urb);
kfree(msg);
- }
- else
+ } else
line6_send_raw_message_async_part(msg, urb);
}
/*
Asynchronously send part of a raw message.
*/
-static int line6_send_raw_message_async_part(struct message *msg, struct urb *urb)
+static int line6_send_raw_message_async_part(struct message *msg,
+ struct urb *urb)
{
int retval;
struct usb_line6 *line6 = msg->line6;
int done = msg->done;
int bytes = min(msg->size - done, line6->max_packet_size);
- usb_fill_int_urb(urb,
- line6->usbdev,
- usb_sndintpipe(line6->usbdev, line6->ep_control_write),
- (char *)msg->buffer + done, bytes,
- line6_async_request_sent, msg, line6->interval);
+ usb_fill_int_urb(urb, line6->usbdev,
+ usb_sndintpipe(line6->usbdev, line6->ep_control_write),
+ (char *)msg->buffer + done, bytes,
+ line6_async_request_sent, msg, line6->interval);
#if DO_DUMP_URB_SEND
line6_write_hexdump(line6, 'S', (char *)msg->buffer + done, bytes);
msg->done += bytes;
retval = usb_submit_urb(urb, GFP_ATOMIC);
- if(retval < 0) {
- dev_err(line6->ifcdev, "line6_send_raw_message_async: usb_submit_urb failed (%d)\n", retval);
+ if (retval < 0) {
+ dev_err(line6->ifcdev, "%s: usb_submit_urb failed (%d)\n",
+ __func__, retval);
usb_free_urb(urb);
kfree(msg);
return -EINVAL;
/*
Asynchronously send raw message.
*/
-int line6_send_raw_message_async(struct usb_line6 *line6, const char *buffer, int size)
+int line6_send_raw_message_async(struct usb_line6 *line6, const char *buffer,
+ int size)
{
struct message *msg;
struct urb *urb;
/* create message: */
msg = kmalloc(sizeof(struct message), GFP_ATOMIC);
- if(msg == NULL) {
+ if (msg == NULL) {
dev_err(line6->ifcdev, "Out of memory\n");
return -ENOMEM;
}
/* create URB: */
urb = usb_alloc_urb(0, GFP_ATOMIC);
- if(urb == NULL) {
+ if (urb == NULL) {
kfree(msg);
dev_err(line6->ifcdev, "Out of memory\n");
return -ENOMEM;
/*
Send sysex message in pieces of wMaxPacketSize bytes.
*/
-int line6_send_sysex_message(struct usb_line6 *line6, const char *buffer, int size)
+int line6_send_sysex_message(struct usb_line6 *line6, const char *buffer,
+ int size)
{
return line6_send_raw_message(line6, buffer, size + SYSEX_EXTRA_SIZE) - SYSEX_EXTRA_SIZE;
}
@param code sysex message code
@param size number of bytes between code and sysex end
*/
-char *line6_alloc_sysex_buffer(struct usb_line6 *line6, int code1, int code2, int size)
+char *line6_alloc_sysex_buffer(struct usb_line6 *line6, int code1, int code2,
+ int size)
{
char *buffer = kmalloc(size + SYSEX_EXTRA_SIZE, GFP_KERNEL);
- if(!buffer) {
+ if (!buffer) {
dev_err(line6->ifcdev, "out of memory\n");
return NULL;
}
struct MidiBuffer *mb = &line6->line6midi->midibuf_in;
int done;
- if(urb->status == -ESHUTDOWN)
+ if (urb->status == -ESHUTDOWN)
return;
#if DO_DUMP_URB_RECEIVE
done = midibuf_write(mb, urb->transfer_buffer, urb->actual_length);
- if(done < urb->actual_length) {
+ if (done < urb->actual_length) {
midibuf_ignore(mb, done);
DEBUG_MESSAGES(dev_err(line6->ifcdev, "%d %d buffer overflow - message skipped\n", done, urb->actual_length));
}
- for(;;) {
+ for (;;) {
done = midibuf_read(mb, line6->buffer_message, LINE6_MESSAGE_MAXLEN);
- if(done == 0)
+ if (done == 0)
break;
/* MIDI input filter */
- if(midibuf_skip_message(mb, line6->line6midi->midi_mask_receive))
+ if (midibuf_skip_message(mb, line6->line6midi->midi_mask_receive))
continue;
line6->message_length = done;
#endif
line6_midi_receive(line6, line6->buffer_message, done);
- switch(line6->usbdev->descriptor.idProduct) {
+ switch (line6->usbdev->descriptor.idProduct) {
case LINE6_DEVID_BASSPODXT:
case LINE6_DEVID_BASSPODXTLIVE:
case LINE6_DEVID_BASSPODXTPRO:
break;
case LINE6_DEVID_PODXTLIVE:
- switch(line6->interface_number) {
+ switch (line6->interface_number) {
case PODXTLIVE_INTERFACE_POD:
pod_process_message((struct usb_line6_pod *)line6);
break;
buffer = kmalloc(2, GFP_KERNEL);
- if(!buffer) {
+ if (!buffer) {
dev_err(line6->ifcdev, "out of memory\n");
return -ENOMEM;
}
#endif
retval = usb_interrupt_msg(line6->usbdev,
- usb_sndintpipe(line6->usbdev, line6->ep_control_write),
- buffer, 2, &partial, LINE6_TIMEOUT * HZ);
+ usb_sndintpipe(line6->usbdev,
+ line6->ep_control_write),
+ buffer, 2, &partial, LINE6_TIMEOUT * HZ);
- if(retval)
+ if (retval)
dev_err(line6->ifcdev, "usb_interrupt_msg failed (%d)\n", retval);
kfree(buffer);
buffer = kmalloc(3, GFP_KERNEL);
- if(!buffer) {
+ if (!buffer) {
dev_err(line6->ifcdev, "out of memory\n");
return -ENOMEM;
}
usb_sndintpipe(line6->usbdev, line6->ep_control_write),
buffer, 3, &partial, LINE6_TIMEOUT * HZ);
- if(retval)
+ if (retval)
dev_err(line6->ifcdev, "usb_interrupt_msg failed (%d)\n", retval);
kfree(buffer);
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
(datalen << 8) | 0x21, address, NULL, 0, LINE6_TIMEOUT * HZ);
- if(ret < 0) {
+ if (ret < 0) {
dev_err(line6->ifcdev, "read request failed (error %d)\n", ret);
return ret;
}
/* Wait for data length. We'll get a couple of 0xff until length arrives. */
do {
ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0x0012, 0x0000, &len, 1, LINE6_TIMEOUT * HZ);
- if(ret < 0) {
- dev_err(line6->ifcdev, "receive length failed (error %d)\n", ret);
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE |
+ USB_DIR_IN,
+ 0x0012, 0x0000, &len, 1,
+ LINE6_TIMEOUT * HZ);
+ if (ret < 0) {
+ dev_err(line6->ifcdev,
+ "receive length failed (error %d)\n", ret);
return ret;
}
}
- while(len == 0xff);
-
- if(len != datalen) { /* should be equal or something went wrong */
- dev_err(line6->ifcdev, "length mismatch (expected %d, got %d)\n", (int)datalen, (int)len);
+ while (len == 0xff)
+ ;
+
+ if (len != datalen) {
+ /* should be equal or something went wrong */
+ dev_err(line6->ifcdev,
+ "length mismatch (expected %d, got %d)\n",
+ (int)datalen, (int)len);
return -EINVAL;
}
/* receive the result: */
ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0x0013, 0x0000, data, datalen, LINE6_TIMEOUT * HZ);
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ 0x0013, 0x0000, data, datalen,
+ LINE6_TIMEOUT * HZ);
- if(ret < 0) {
+ if (ret < 0) {
dev_err(line6->ifcdev, "read failed (error %d)\n", ret);
return ret;
}
/*
Write data to device.
*/
-int line6_write_data(struct usb_line6 *line6, int address, void *data, size_t datalen)
+int line6_write_data(struct usb_line6 *line6, int address, void *data,
+ size_t datalen)
{
struct usb_device *usbdev = line6->usbdev;
int ret;
unsigned char status;
- ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev,0), 0x67,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
- 0x0022, address, data, datalen, LINE6_TIMEOUT * HZ);
+ ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+ 0x0022, address, data, datalen,
+ LINE6_TIMEOUT * HZ);
- if(ret < 0) {
- dev_err(line6->ifcdev, "write request failed (error %d)\n", ret);
+ if (ret < 0) {
+ dev_err(line6->ifcdev,
+ "write request failed (error %d)\n", ret);
return ret;
}
do {
- ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev,0), 0x67,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0x0012, 0x0000, &status, 1, LINE6_TIMEOUT * HZ);
-
- if(ret < 0) {
- dev_err(line6->ifcdev, "receiving status failed (error %d)\n", ret);
+ ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0),
+ 0x67,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE |
+ USB_DIR_IN,
+ 0x0012, 0x0000,
+ &status, 1, LINE6_TIMEOUT * HZ);
+
+ if (ret < 0) {
+ dev_err(line6->ifcdev,
+ "receiving status failed (error %d)\n", ret);
return ret;
}
}
- while(status == 0xff);
+ while (status == 0xff)
+ ;
- if(status != 0) {
+ if (status != 0) {
dev_err(line6->ifcdev, "write failed (error %d)\n", ret);
return -EINVAL;
}
static void line6_destruct(struct usb_interface *interface)
{
struct usb_line6 *line6;
- if(interface == NULL) return;
+
+ if (interface == NULL)
+ return;
line6 = usb_get_intfdata(interface);
- if(line6 == NULL) return;
+ if (line6 == NULL)
+ return;
/* free buffer memory first: */
- if(line6->buffer_message != NULL) kfree(line6->buffer_message);
- if(line6->buffer_listen != NULL) kfree(line6->buffer_listen);
+ kfree(line6->buffer_message);
+ kfree(line6->buffer_listen);
/* then free URBs: */
- if(line6->urb_listen != NULL) usb_free_urb(line6->urb_listen);
+ usb_free_urb(line6->urb_listen);
/* make sure the device isn't destructed twice: */
usb_set_intfdata(interface, NULL);
{
int i;
- for(i = 0; i < LINE6_MAX_DEVICES; ++i) {
+ for (i = 0; i < LINE6_MAX_DEVICES; ++i) {
struct usb_line6 *dev = line6_devices[i];
printk(KERN_INFO "Line6 device %d: ", i);
- if(dev == NULL)
+ if (dev == NULL)
printk("(not used)\n");
else
printk("%s:%d\n", dev->properties->name, dev->interface_number);
int ep_read = 0, ep_write = 0;
int ret;
- if(interface == NULL) return -ENODEV;
+ if (interface == NULL)
+ return -ENODEV;
usbdev = interface_to_usbdev(interface);
- if(usbdev == NULL) return -ENODEV;
+ if (usbdev == NULL)
+ return -ENODEV;
/* increment reference counters: */
usb_get_intf(interface);
usb_get_dev(usbdev);
/* we don't handle multiple configurations */
- if(usbdev->descriptor.bNumConfigurations != 1)
+ if (usbdev->descriptor.bNumConfigurations != 1)
return -ENODEV;
/* check vendor and product id */
- for(devtype = sizeof(line6_id_table) / sizeof(line6_id_table[0]) - 1; devtype--;)
- if((le16_to_cpu(usbdev->descriptor.idVendor) == line6_id_table[devtype].idVendor) &&
+ for (devtype = sizeof(line6_id_table) / sizeof(line6_id_table[0]) - 1; devtype--;)
+ if ((le16_to_cpu(usbdev->descriptor.idVendor) == line6_id_table[devtype].idVendor) &&
(le16_to_cpu(usbdev->descriptor.idProduct) == line6_id_table[devtype].idProduct))
break;
- if(devtype < 0)
+ if (devtype < 0)
return -ENODEV;
/* find free slot in device table: */
- for(devnum = 0; devnum < LINE6_MAX_DEVICES; ++devnum)
- if(line6_devices[devnum] == NULL)
+ for (devnum = 0; devnum < LINE6_MAX_DEVICES; ++devnum)
+ if (line6_devices[devnum] == NULL)
break;
- if(devnum == LINE6_MAX_DEVICES)
+ if (devnum == LINE6_MAX_DEVICES)
return -ENODEV;
/* initialize device info: */
/* query interface number */
interface_number = interface->cur_altsetting->desc.bInterfaceNumber;
- switch(product) {
+ switch (product) {
case LINE6_DEVID_BASSPODXTLIVE:
case LINE6_DEVID_POCKETPOD:
case LINE6_DEVID_PODXTLIVE:
case LINE6_DEVID_PODX3:
case LINE6_DEVID_PODX3LIVE:
- switch(interface_number) {
- case 0: alternate = 1; break;
- case 1: alternate = 0; break;
- default: MISSING_CASE;
+ switch (interface_number) {
+ case 0:
+ alternate = 1;
+ break;
+ case 1:
+ alternate = 0;
+ break;
+ default:
+ MISSING_CASE;
}
break;
case LINE6_DEVID_TONEPORT_GX:
case LINE6_DEVID_GUITARPORT:
- alternate = 2; // 1..4 seem to be ok
+ alternate = 2; /* 1..4 seem to be ok */
break;
case LINE6_DEVID_TONEPORT_UX1:
case LINE6_DEVID_TONEPORT_UX2:
- switch(interface_number) {
- case 0: alternate = 2; break; /* defaults to 44.1kHz, 16-bit */
- case 1: alternate = 0; break;
- default: MISSING_CASE;
+ switch (interface_number) {
+ case 0:
+ /* defaults to 44.1kHz, 16-bit */
+ alternate = 2;
+ break;
+ case 1:
+ alternate = 0;
+ break;
+ default:
+ MISSING_CASE;
}
break;
return -ENODEV;
}
- if((ret = usb_set_interface(usbdev, interface_number, alternate)) < 0) {
+ ret = usb_set_interface(usbdev, interface_number, alternate);
+ if (ret < 0) {
dev_err(&interface->dev, "set_interface failed\n");
return ret;
}
/* initialize device data based on product id: */
- switch(product) {
+ switch (product) {
case LINE6_DEVID_BASSPODXT:
case LINE6_DEVID_BASSPODXTLIVE:
case LINE6_DEVID_BASSPODXTPRO:
break;
case LINE6_DEVID_PODXTLIVE:
- switch(interface_number) {
+ switch (interface_number) {
case PODXTLIVE_INTERFACE_POD:
size = sizeof(struct usb_line6_pod);
ep_read = 0x84;
return -ENODEV;
}
- if(size == 0) {
+ if (size == 0) {
dev_err(line6->ifcdev, "driver bug: interface data size not set\n");
return -ENODEV;
}
line6 = kzalloc(size, GFP_KERNEL);
- if(line6 == NULL) {
+ if (line6 == NULL) {
dev_err(&interface->dev, "Out of memory\n");
return -ENOMEM;
}
unsigned epnum = usb_pipeendpoint(usb_rcvintpipe(usbdev, ep_read));
ep = usbdev->ep_in[epnum];
- if(ep != NULL) {
+ if (ep != NULL) {
line6->interval = ep->desc.bInterval;
line6->max_packet_size = le16_to_cpu(ep->desc.wMaxPacketSize);
- }
- else {
+ } else {
line6->interval = LINE6_FALLBACK_INTERVAL;
line6->max_packet_size = LINE6_FALLBACK_MAXPACKETSIZE;
dev_err(line6->ifcdev, "endpoint not available, using fallback values");
usb_set_intfdata(interface, line6);
- if(properties->capabilities & LINE6_BIT_CONTROL) {
+ if (properties->capabilities & LINE6_BIT_CONTROL) {
/* initialize USB buffers: */
line6->buffer_listen = kmalloc(LINE6_BUFSIZE_LISTEN, GFP_KERNEL);
- if(line6->buffer_listen == NULL) {
+ if (line6->buffer_listen == NULL) {
dev_err(&interface->dev, "Out of memory\n");
line6_destruct(interface);
return -ENOMEM;
line6->buffer_message = kmalloc(LINE6_MESSAGE_MAXLEN, GFP_KERNEL);
- if(line6->buffer_message == NULL) {
+ if (line6->buffer_message == NULL) {
dev_err(&interface->dev, "Out of memory\n");
line6_destruct(interface);
return -ENOMEM;
line6->urb_listen = usb_alloc_urb(0, GFP_KERNEL);
- if(line6->urb_listen == NULL) {
+ if (line6->urb_listen == NULL) {
dev_err(&interface->dev, "Out of memory\n");
line6_destruct(interface);
return -ENOMEM;
}
- if((ret = line6_start_listen(line6)) < 0) {
- dev_err(&interface->dev, " line6_probe: usb_submit_urb failed\n");
+ ret = line6_start_listen(line6);
+ if (ret < 0) {
+ dev_err(&interface->dev, "%s: usb_submit_urb failed\n",
+ __func__);
line6_destruct(interface);
return ret;
}
}
/* initialize device data based on product id: */
- switch(product) {
+ switch (product) {
case LINE6_DEVID_BASSPODXT:
case LINE6_DEVID_BASSPODXTLIVE:
case LINE6_DEVID_BASSPODXTPRO:
break;
case LINE6_DEVID_PODXTLIVE:
- switch(interface_number) {
+ switch (interface_number) {
case PODXTLIVE_INTERFACE_POD:
ret = pod_init(interface, (struct usb_line6_pod *)line6);
break;
break;
default:
- dev_err(&interface->dev, "PODxt Live interface %d not supported\n", interface_number);
+ dev_err(&interface->dev,
+ "PODxt Live interface %d not supported\n",
+ interface_number);
ret = -ENODEV;
}
ret = -ENODEV;
}
- if(ret < 0) {
+ if (ret < 0) {
line6_destruct(interface);
return ret;
}
- if((ret = sysfs_create_link(&interface->dev.kobj, &usbdev->dev.kobj, "usb_device")) < 0) {
+ ret = sysfs_create_link(&interface->dev.kobj, &usbdev->dev.kobj,
+ "usb_device");
+ if (ret < 0) {
line6_destruct(interface);
return ret;
}
- dev_info(&interface->dev, "Line6 %s now attached\n", line6->properties->name);
+ dev_info(&interface->dev, "Line6 %s now attached\n",
+ line6->properties->name);
line6_devices[devnum] = line6;
line6_list_devices();
return ret;
struct usb_device *usbdev;
int interface_number, i;
- if(interface == NULL) return;
+ if (interface == NULL)
+ return;
usbdev = interface_to_usbdev(interface);
- if(usbdev == NULL) return;
+ if (usbdev == NULL)
+ return;
sysfs_remove_link(&interface->dev.kobj, "usb_device");
interface_number = interface->cur_altsetting->desc.bInterfaceNumber;
line6 = usb_get_intfdata(interface);
- if(line6 != NULL) {
- if(line6->urb_listen != NULL) usb_kill_urb(line6->urb_listen);
+ if (line6 != NULL) {
+ if (line6->urb_listen != NULL)
+ usb_kill_urb(line6->urb_listen);
- if(usbdev != line6->usbdev)
- dev_err(line6->ifcdev, "driver bug: inconsistent usb device\n");
+ if (usbdev != line6->usbdev)
+ dev_err(line6->ifcdev,
+ "driver bug: inconsistent usb device\n");
- switch(line6->usbdev->descriptor.idProduct) {
+ switch (line6->usbdev->descriptor.idProduct) {
case LINE6_DEVID_BASSPODXT:
case LINE6_DEVID_BASSPODXTLIVE:
case LINE6_DEVID_BASSPODXTPRO:
break;
case LINE6_DEVID_PODXTLIVE:
- switch(interface_number) {
+ switch (interface_number) {
case PODXTLIVE_INTERFACE_POD:
pod_disconnect(interface);
break;
dev_info(&interface->dev, "Line6 %s now disconnected\n", line6->properties->name);
- for(i = LINE6_MAX_DEVICES; i--;)
- if(line6_devices[i] == line6)
+ for (i = LINE6_MAX_DEVICES; i--;)
+ if (line6_devices[i] == line6)
line6_devices[i] = NULL;
}
{
int i, retval;
- printk("%s driver version %s%s\n", DRIVER_NAME, DRIVER_VERSION, DRIVER_REVISION);
+ printk(KERN_INFO "%s driver version %s%s\n",
+ DRIVER_NAME, DRIVER_VERSION, DRIVER_REVISION);
line6_workqueue = create_workqueue(DRIVER_NAME);
if (line6_workqueue == NULL) {
return -EINVAL;
}
- for(i = LINE6_MAX_DEVICES; i--;)
+ for (i = LINE6_MAX_DEVICES; i--;)
line6_devices[i] = NULL;
retval = usb_register(&line6_driver);
- if(retval)
+ if (retval)
err("usb_register failed. Error number %d", retval);
return retval;
projects / linux-2.6-omap-h63xx.git / commitdiff