}
}
- if((tty->flip.flag_buf_ptr == NULL) ||
- (tty->flip.char_buf_ptr == NULL))
- return;
tty_insert_flip_char(tty, ch, TTY_NORMAL);
}
chan = list_entry(ele, struct chan, list);
if(!chan->input || (chan->ops->read == NULL)) continue;
do {
- if((tty != NULL) &&
- (tty->flip.count >= TTY_FLIPBUF_SIZE)){
+ if (tty && !tty_buffer_request_room(tty, 1)) {
schedule_delayed_work(task, 1);
goto out;
}
tty->disc_data = hu;
hu->tty = tty;
+ tty->receive_room = 65536;
spin_lock_init(&hu->rx_lock);
hci_uart_tx_wakeup(hu);
}
-/* hci_uart_tty_room()
- *
- * Callback function from tty driver. Return the amount of
- * space left in the receiver's buffer to decide if remote
- * transmitter is to be throttled.
- *
- * Arguments: tty pointer to associated tty instance data
- * Return Value: number of bytes left in receive buffer
- */
-static int hci_uart_tty_room (struct tty_struct *tty)
-{
- return 65536;
-}
-
/* hci_uart_tty_receive()
*
* Called by tty low level driver when receive data is
hci_uart_ldisc.write = hci_uart_tty_write;
hci_uart_ldisc.ioctl = hci_uart_tty_ioctl;
hci_uart_ldisc.poll = hci_uart_tty_poll;
- hci_uart_ldisc.receive_room = hci_uart_tty_room;
hci_uart_ldisc.receive_buf = hci_uart_tty_receive;
hci_uart_ldisc.write_wakeup = hci_uart_tty_wakeup;
hci_uart_ldisc.owner = THIS_MODULE;
config COMPUTONE
tristate "Computone IntelliPort Plus serial support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD
---help---
This driver supports the entire family of Intelliport II/Plus
controllers with the exception of the MicroChannel controllers and
config ESPSERIAL
tristate "Hayes ESP serial port support"
- depends on SERIAL_NONSTANDARD && ISA && BROKEN_ON_SMP && ISA_DMA_API
+ depends on SERIAL_NONSTANDARD && ISA && ISA_DMA_API
help
This is a driver which supports Hayes ESP serial ports. Both single
port cards and multiport cards are supported. Make sure to read
config MOXA_INTELLIO
tristate "Moxa Intellio support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD
help
Say Y here if you have a Moxa Intellio multiport serial card.
int status;
int serdatr;
struct tty_struct *tty = info->tty;
- unsigned char ch;
+ unsigned char ch, flag;
struct async_icount *icount;
+ int oe = 0;
icount = &info->state->icount;
status |= UART_LSR_OE;
ch = serdatr & 0xff;
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- goto ignore_char;
- *tty->flip.char_buf_ptr = ch;
icount->rx++;
#ifdef SERIAL_DEBUG_INTR
printk("DR%02x:%02x...", ch, status);
#endif
- *tty->flip.flag_buf_ptr = 0;
+ flag = TTY_NORMAL;
/*
* We don't handle parity or frame errors - but I have left
* should be ignored.
*/
if (status & info->ignore_status_mask)
- goto ignore_char;
+ goto out;
status &= info->read_status_mask;
#ifdef SERIAL_DEBUG_INTR
printk("handling break....");
#endif
- *tty->flip.flag_buf_ptr = TTY_BREAK;
+ flag = TTY_BREAK;
if (info->flags & ASYNC_SAK)
do_SAK(tty);
} else if (status & UART_LSR_PE)
- *tty->flip.flag_buf_ptr = TTY_PARITY;
+ flag = TTY_PARITY;
else if (status & UART_LSR_FE)
- *tty->flip.flag_buf_ptr = TTY_FRAME;
+ flag = TTY_FRAME;
if (status & UART_LSR_OE) {
/*
* Overrun is special, since it's
* reported immediately, and doesn't
* affect the current character
*/
- if (tty->flip.count < TTY_FLIPBUF_SIZE) {
- tty->flip.count++;
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- *tty->flip.flag_buf_ptr = TTY_OVERRUN;
- }
+ oe = 1;
}
}
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
- ignore_char:
-
+ tty_insert_flip_char(tty, ch, flag);
+ if (oe == 1)
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
tty_flip_buffer_push(tty);
+out:
+ return;
}
static _INLINE_ void transmit_chars(struct async_struct *info)
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/serial.h>
#include <linux/major.h>
#include <linux/string.h>
int had_work;
int mdm_change;
int mdm_status;
-
+ int len;
if((cinfo = (struct cyclades_card *)dev_id) == 0){
#ifdef CY_DEBUG_INTERRUPTS
printk("cyy_interrupt: spurious interrupt %d\n\r", irq);
info->icount.rx++;
continue;
}
- if (tty->flip.count < TTY_FLIPBUF_SIZE){
- tty->flip.count++;
+ if (tty_buffer_request_room(tty, 1)) {
if (data & info->read_status_mask){
if(data & CyBREAK){
- *tty->flip.flag_buf_ptr++ =
- TTY_BREAK;
- *tty->flip.char_buf_ptr++ =
- cy_readb(base_addr+(CyRDSR<<index));
+ tty_insert_flip_char(tty, cy_readb(base_addr+(CyRDSR<<index)), TTY_BREAK);
info->icount.rx++;
if (info->flags & ASYNC_SAK){
do_SAK(tty);
}
}else if(data & CyFRAME){
- *tty->flip.flag_buf_ptr++ =
- TTY_FRAME;
- *tty->flip.char_buf_ptr++ =
- cy_readb(base_addr+(CyRDSR<<index));
+ tty_insert_flip_char(tty, cy_readb(base_addr+(CyRDSR<<index)), TTY_FRAME);
info->icount.rx++;
info->idle_stats.frame_errs++;
}else if(data & CyPARITY){
- *tty->flip.flag_buf_ptr++ =
- TTY_PARITY;
- *tty->flip.char_buf_ptr++ =
- cy_readb(base_addr+(CyRDSR<<index));
+ /* Pieces of seven... */
+ tty_insert_flip_char(tty, cy_readb(base_addr+(CyRDSR<<index)), TTY_PARITY);
info->icount.rx++;
info->idle_stats.parity_errs++;
}else if(data & CyOVERRUN){
- *tty->flip.flag_buf_ptr++ =
- TTY_OVERRUN;
- *tty->flip.char_buf_ptr++ = 0;
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
info->icount.rx++;
/* If the flip buffer itself is
overflowing, we still lose
the next incoming character.
*/
- if(tty->flip.count
- < TTY_FLIPBUF_SIZE){
- tty->flip.count++;
- *tty->flip.flag_buf_ptr++ =
- TTY_NORMAL;
- *tty->flip.char_buf_ptr++ =
- cy_readb(base_addr+(CyRDSR<<index));
- info->icount.rx++;
- }
+ tty_insert_flip_char(tty, cy_readb(base_addr+(CyRDSR<<index)), TTY_FRAME);
+ info->icount.rx++;
info->idle_stats.overruns++;
/* These two conditions may imply */
/* a normal read should be done. */
/* }else if(data & CyTIMEOUT){ */
/* }else if(data & CySPECHAR){ */
- }else{
- *tty->flip.flag_buf_ptr++ = 0;
- *tty->flip.char_buf_ptr++ = 0;
- info->icount.rx++;
+ }else {
+ tty_insert_flip_char(tty, 0, TTY_NORMAL);
+ info->icount.rx++;
}
}else{
- *tty->flip.flag_buf_ptr++ = 0;
- *tty->flip.char_buf_ptr++ = 0;
+ tty_insert_flip_char(tty, 0, TTY_NORMAL);
info->icount.rx++;
}
}else{
info->mon.char_max = char_count;
info->mon.char_last = char_count;
#endif
- while(char_count--){
- if (tty->flip.count >= TTY_FLIPBUF_SIZE){
- break;
- }
- tty->flip.count++;
+ len = tty_buffer_request_room(tty, char_count);
+ while(len--){
data = cy_readb(base_addr+(CyRDSR<<index));
- *tty->flip.flag_buf_ptr++ = TTY_NORMAL;
- *tty->flip.char_buf_ptr++ = data;
+ tty_insert_flip_char(tty, data, TTY_NORMAL);
info->idle_stats.recv_bytes++;
info->icount.rx++;
#ifdef CY_16Y_HACK
}
info->idle_stats.recv_idle = jiffies;
}
- schedule_delayed_work(&tty->flip.work, 1);
+ schedule_delayed_work(&tty->buf.work, 1);
}
/* end of service */
cy_writeb(base_addr+(CyRIR<<index), (save_xir & 0x3f));
struct cyclades_card *cinfo = &cy_card[info->card];
struct tty_struct *tty = info->tty;
volatile int char_count;
+ int len;
#ifdef BLOCKMOVE
int small_count;
#else
tty->flip.count += small_count;
}
#else
- while(char_count--){
- if (tty->flip.count >= N_TTY_BUF_SIZE - tty->read_cnt)
- break;
-
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- break;
-
+ len = tty_buffer_request_room(tty, char_count);
+ while(len--){
data = cy_readb(cinfo->base_addr + rx_bufaddr + new_rx_get);
new_rx_get = (new_rx_get + 1) & (rx_bufsize - 1);
- tty->flip.count++;
- *tty->flip.flag_buf_ptr++ = TTY_NORMAL;
- *tty->flip.char_buf_ptr++ = data;
+ tty_insert_flip_char(tty, data, TTY_NORMAL);
info->idle_stats.recv_bytes++;
info->icount.rx++;
}
}
#endif
info->idle_stats.recv_idle = jiffies;
- schedule_delayed_work(&tty->flip.work, 1);
+ schedule_delayed_work(&tty->buf.work, 1);
}
/* Update rx_get */
cy_writel(&buf_ctrl->rx_get, new_rx_get);
switch(cmd) {
case C_CM_PR_ERROR:
- tty->flip.count++;
- *tty->flip.flag_buf_ptr++ = TTY_PARITY;
- *tty->flip.char_buf_ptr++ = 0;
+ tty_insert_flip_char(tty, 0, TTY_PARITY);
info->icount.rx++;
special_count++;
break;
case C_CM_FR_ERROR:
- tty->flip.count++;
- *tty->flip.flag_buf_ptr++ = TTY_FRAME;
- *tty->flip.char_buf_ptr++ = 0;
+ tty_insert_flip_char(tty, 0, TTY_FRAME);
info->icount.rx++;
special_count++;
break;
case C_CM_RXBRK:
- tty->flip.count++;
- *tty->flip.flag_buf_ptr++ = TTY_BREAK;
- *tty->flip.char_buf_ptr++ = 0;
+ tty_insert_flip_char(tty, 0, TTY_BREAK);
info->icount.rx++;
special_count++;
break;
if(delta_count)
cy_sched_event(info, Cy_EVENT_DELTA_WAKEUP);
if(special_count)
- schedule_delayed_work(&tty->flip.work, 1);
+ schedule_delayed_work(&tty->buf.work, 1);
}
}
if (tty) { /* Begin if valid tty */
if (event & BREAK_IND) { /* Begin if BREAK_IND */
/* A break has been indicated */
- tty->flip.count++;
- *tty->flip.flag_buf_ptr++ = TTY_BREAK;
- *tty->flip.char_buf_ptr++ = 0;
+ tty_insert_flip_char(tty, 0, TTY_BREAK);
tty_schedule_flip(tty);
} else if (event & LOWTX_IND) { /* Begin LOWTX_IND */
if (ch->statusflags & LOWWAIT)
int dataToRead, wrapgap, bytesAvailable;
unsigned int tail, head;
unsigned int wrapmask;
- int rc;
/* ---------------------------------------------------------------
This routine is called by doint when a receive data event
return;
}
- if (tty->flip.count == TTY_FLIPBUF_SIZE)
+ if (tty_buffer_request_room(tty, bytesAvailable + 1) == 0)
return;
if (readb(&bc->orun)) {
writeb(0, &bc->orun);
printk(KERN_WARNING "epca; overrun! DigiBoard device %s\n",tty->name);
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
}
rxwinon(ch);
- rptr = tty->flip.char_buf_ptr;
- rc = tty->flip.count;
while (bytesAvailable > 0) { /* Begin while there is data on the card */
wrapgap = (head >= tail) ? head - tail : ch->rxbufsize - tail;
/* ---------------------------------------------------------------
/* --------------------------------------------------------------
Make sure we don't overflow the buffer
----------------------------------------------------------------- */
- if ((rc + dataToRead) > TTY_FLIPBUF_SIZE)
- dataToRead = TTY_FLIPBUF_SIZE - rc;
+ dataToRead = tty_prepare_flip_string(tty, &rptr, dataToRead);
if (dataToRead == 0)
break;
/* ---------------------------------------------------------------
for translation if necessary.
------------------------------------------------------------------ */
memcpy_fromio(rptr, ch->rxptr + tail, dataToRead);
- rc += dataToRead;
- rptr += dataToRead;
tail = (tail + dataToRead) & wrapmask;
bytesAvailable -= dataToRead;
} /* End while there is data on the card */
- tty->flip.count = rc;
- tty->flip.char_buf_ptr = rptr;
globalwinon(ch);
writew(tail, &bc->rout);
/* Must be called with global data */
for (i = 0; i < num_bytes; i++) {
if (!(err_buf->data[i] & status_mask)) {
- *(tty->flip.char_buf_ptr++) = pio_buf->data[i];
+ int flag = 0;
if (err_buf->data[i] & 0x04) {
- *(tty->flip.flag_buf_ptr++) = TTY_BREAK;
-
+ flag = TTY_BREAK;
if (info->flags & ASYNC_SAK)
do_SAK(tty);
}
else if (err_buf->data[i] & 0x02)
- *(tty->flip.flag_buf_ptr++) = TTY_FRAME;
+ flag = TTY_FRAME;
else if (err_buf->data[i] & 0x01)
- *(tty->flip.flag_buf_ptr++) = TTY_PARITY;
- else
- *(tty->flip.flag_buf_ptr++) = 0;
-
- tty->flip.count++;
+ flag = TTY_PARITY;
+ tty_insert_flip_char(tty, pio_buf->data[i], flag);
}
}
- schedule_delayed_work(&tty->flip.work, 1);
+ schedule_delayed_work(&tty->buf.work, 1);
info->stat_flags &= ~ESP_STAT_RX_TIMEOUT;
release_pio_buffer(pio_buf);
int num_bytes;
unsigned long flags;
-
flags=claim_dma_lock();
disable_dma(dma);
clear_dma_ff(dma);
info->icount.rx += num_bytes;
- memcpy(tty->flip.char_buf_ptr, dma_buffer, num_bytes);
- tty->flip.char_buf_ptr += num_bytes;
- tty->flip.count += num_bytes;
- memset(tty->flip.flag_buf_ptr, 0, num_bytes);
- tty->flip.flag_buf_ptr += num_bytes;
-
if (num_bytes > 0) {
- tty->flip.flag_buf_ptr--;
+ tty_insert_flip_string(tty, dma_buffer, num_bytes - 1);
status &= (0x1c & info->read_status_mask);
+
+ /* Is the status significant or do we throw the last byte ? */
+ if (!(status & info->ignore_status_mask)) {
+ int statflag = 0;
- if (status & info->ignore_status_mask) {
- tty->flip.count--;
- tty->flip.char_buf_ptr--;
- tty->flip.flag_buf_ptr--;
- } else if (status & 0x10) {
- *tty->flip.flag_buf_ptr = TTY_BREAK;
- (info->icount.brk)++;
- if (info->flags & ASYNC_SAK)
- do_SAK(tty);
- } else if (status & 0x08) {
- *tty->flip.flag_buf_ptr = TTY_FRAME;
- (info->icount.frame)++;
- }
- else if (status & 0x04) {
- *tty->flip.flag_buf_ptr = TTY_PARITY;
- (info->icount.parity)++;
+ if (status & 0x10) {
+ statflag = TTY_BREAK;
+ (info->icount.brk)++;
+ if (info->flags & ASYNC_SAK)
+ do_SAK(tty);
+ } else if (status & 0x08) {
+ statflag = TTY_FRAME;
+ (info->icount.frame)++;
+ }
+ else if (status & 0x04) {
+ statflag = TTY_PARITY;
+ (info->icount.parity)++;
+ }
+ tty_insert_flip_char(tty, dma_buffer[num_bytes - 1], statflag);
}
-
- tty->flip.flag_buf_ptr++;
-
- schedule_delayed_work(&tty->flip.work, 1);
+ schedule_delayed_work(&tty->buf.work, 1);
}
if (dma_bytes != num_bytes) {
num_bytes = serial_in(info, UART_ESI_STAT1) << 8;
num_bytes |= serial_in(info, UART_ESI_STAT2);
- if (num_bytes > (TTY_FLIPBUF_SIZE - info->tty->flip.count))
- num_bytes = TTY_FLIPBUF_SIZE - info->tty->flip.count;
+ num_bytes = tty_buffer_request_room(info->tty, num_bytes);
if (num_bytes) {
if (dma_bytes ||
/* Read data if any */
for (;;) {
- int count = N_INBUF;
- if (count > (TTY_FLIPBUF_SIZE - tty->flip.count))
- count = TTY_FLIPBUF_SIZE - tty->flip.count;
+ int count = tty_buffer_request_room(tty, N_INBUF);
/* If flip is full, just reschedule a later read */
if (count == 0) {
tty_insert_flip_char(tty, buf[i], 0);
}
- if (tty->flip.count)
+ if (count)
tty_schedule_flip(tty);
/*
/* remove the read masks */
hvcsd->todo_mask &= ~(HVCS_READ_MASK);
- if ((tty->flip.count + HVCS_BUFF_LEN) < TTY_FLIPBUF_SIZE) {
+ if (tty_buffer_request_room(tty, HVCS_BUFF_LEN) >= HVCS_BUFF_LEN) {
got = hvc_get_chars(unit_address,
&buf[0],
HVCS_BUFF_LEN);
- for (i=0;got && i<got;i++)
- tty_insert_flip_char(tty, buf[i], TTY_NORMAL);
+ tty_insert_flip_string(tty, buf, got);
}
/* Give the TTY time to process the data we just sent. */
hvcsd->todo_mask |= HVCS_QUICK_READ;
spin_unlock_irqrestore(&hvcsd->lock, flags);
- if (tty->flip.count) {
- /* This is synch because tty->low_latency == 1 */
+ /* This is synch because tty->low_latency == 1 */
+ if(got)
tty_flip_buffer_push(tty);
- }
if (!got) {
/* Do this _after_ the flip_buffer_push */
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/termios.h>
#include <linux/fs.h>
#include <linux/sched.h>
unsigned short base, header, word_count, count;
unsigned char channel;
short byte_count;
+ unsigned char *rp;
card = (struct isi_board *) dev_id;
break;
case 1: /* Received Break !!! */
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- break;
- *tty->flip.flag_buf_ptr++ = TTY_BREAK;
- *tty->flip.char_buf_ptr++ = 0;
- tty->flip.count++;
+ tty_insert_flip_char(tty, 0, TTY_BREAK);
if (port->flags & ASYNC_SAK)
do_SAK(tty);
- schedule_delayed_work(&tty->flip.work, 1);
+ tty_flip_buffer_push(tty);
break;
case 2: /* Statistics */
}
}
else { /* Data Packet */
- count = min_t(unsigned short, byte_count, (TTY_FLIPBUF_SIZE - tty->flip.count));
+
+ count = tty_prepare_flip_string(tty, &rp, byte_count & ~1);
#ifdef ISICOM_DEBUG
printk(KERN_DEBUG "ISICOM: Intr: Can rx %d of %d bytes.\n",
count, byte_count);
#endif
word_count = count >> 1;
- insw(base, tty->flip.char_buf_ptr, word_count);
- tty->flip.char_buf_ptr += (word_count << 1);
+ insw(base, rp, word_count);
byte_count -= (word_count << 1);
if (count & 0x0001) {
- *tty->flip.char_buf_ptr++ = (char)(inw(base) & 0xff);
+ tty_insert_flip_char(tty, inw(base) & 0xff, TTY_NORMAL);
byte_count -= 2;
}
- memset(tty->flip.flag_buf_ptr, 0, count);
- tty->flip.flag_buf_ptr += count;
- tty->flip.count += count;
-
if (byte_count > 0) {
printk(KERN_DEBUG "ISICOM: Intr(0x%x:%d): Flip buffer overflow! dropping bytes...\n",
base, channel+1);
byte_count -= 2;
}
}
- schedule_delayed_work(&tty->flip.work, 1);
+ tty_flip_buffer_push(tty);
}
if (card->isa == YES)
ClearInterrupt(base);
stlen = size - tail;
}
- len = MIN(len, (TTY_FLIPBUF_SIZE - tty->flip.count));
+ len = tty_buffer_request_room(tty, len);
+ /* FIXME : iomap ? */
shbuf = (volatile char *) EBRDGETMEMPTR(brdp, portp->rxoffset);
while (len > 0) {
stlen = MIN(len, stlen);
- memcpy(tty->flip.char_buf_ptr, (char *) (shbuf + tail), stlen);
- memset(tty->flip.flag_buf_ptr, 0, stlen);
- tty->flip.char_buf_ptr += stlen;
- tty->flip.flag_buf_ptr += stlen;
- tty->flip.count += stlen;
-
+ tty_insert_flip_string(tty, (char *)(shbuf + tail), stlen);
len -= stlen;
tail += stlen;
if (tail >= size) {
if ((nt.data & DT_RXBREAK) && (portp->rxmarkmsk & BRKINT)) {
if (tty != (struct tty_struct *) NULL) {
- if (tty->flip.count < TTY_FLIPBUF_SIZE) {
- tty->flip.count++;
- *tty->flip.flag_buf_ptr++ = TTY_BREAK;
- *tty->flip.char_buf_ptr++ = 0;
- if (portp->flags & ASYNC_SAK) {
- do_SAK(tty);
- EBRDENABLE(brdp);
- }
- tty_schedule_flip(tty);
+ tty_insert_flip_char(tty, 0, TTY_BREAK);
+ if (portp->flags & ASYNC_SAK) {
+ do_SAK(tty);
+ EBRDENABLE(brdp);
}
+ tty_schedule_flip(tty);
}
}
if (portp->tty != (struct tty_struct *) NULL) {
if (portp->tty->driver_data == portp) {
stli_comstats.ttystate = portp->tty->flags;
- stli_comstats.rxbuffered = portp->tty->flip.count;
+ stli_comstats.rxbuffered = -1 /*portp->tty->flip.count*/;
if (portp->tty->termios != (struct termios *) NULL) {
stli_comstats.cflags = portp->tty->termios->c_cflag;
stli_comstats.iflags = portp->tty->termios->c_iflag;
static int MoxaPortDCDON(int);
static void MoxaPortFlushData(int, int);
static int MoxaPortWriteData(int, unsigned char *, int);
-static int MoxaPortReadData(int, unsigned char *, int);
+static int MoxaPortReadData(int, struct tty_struct *tty);
static int MoxaPortTxQueue(int);
static int MoxaPortRxQueue(int);
static int MoxaPortTxFree(int);
.tiocmset = moxa_tiocmset,
};
+static spinlock_t moxa_lock = SPIN_LOCK_UNLOCKED;
+
#ifdef CONFIG_PCI
static int moxa_get_PCI_conf(struct pci_dev *p, int board_type, moxa_board_conf * board)
{
if (ch == NULL)
return (0);
port = ch->port;
- save_flags(flags);
- cli();
+
+ spin_lock_irqsave(&moxa_lock, flags);
len = MoxaPortWriteData(port, (unsigned char *) buf, count);
- restore_flags(flags);
+ spin_unlock_irqrestore(&moxa_lock, flags);
/*********************************************
if ( !(ch->statusflags & LOWWAIT) &&
if (ch == NULL)
return;
port = ch->port;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&moxa_lock, flags);
moxaXmitBuff[0] = c;
MoxaPortWriteData(port, moxaXmitBuff, 1);
- restore_flags(flags);
+ spin_unlock_irqrestore(&moxa_lock, flags);
/************************************************
if ( !(ch->statusflags & LOWWAIT) && (MoxaPortTxFree(port) <= 100) )
*************************************************/
printk("block_til_ready before block: ttys%d, count = %d\n",
ch->line, ch->count);
#endif
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&moxa_lock, flags);
if (!tty_hung_up_p(filp))
ch->count--;
- restore_flags(flags);
ch->blocked_open++;
+ spin_unlock_irqrestore(&moxa_lock, flags);
+
while (1) {
set_current_state(TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp) ||
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&ch->open_wait, &wait);
+
+ spin_lock_irqsave(&moxa_lock, flags);
if (!tty_hung_up_p(filp))
ch->count++;
ch->blocked_open--;
+ spin_unlock_irqrestore(&moxa_lock, flags);
#ifdef SERIAL_DEBUG_OPEN
printk("block_til_ready after blocking: ttys%d, count = %d\n",
ch->line, ch->count);
#endif
if (retval)
return (retval);
+ /* FIXME: review to see if we need to use set_bit on these */
ch->asyncflags |= ASYNC_NORMAL_ACTIVE;
- return (0);
+ return 0;
}
static void setup_empty_event(struct tty_struct *tty)
struct moxa_str *ch = tty->driver_data;
unsigned long flags;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&moxa_lock, flags);
ch->statusflags |= EMPTYWAIT;
moxaEmptyTimer_on[ch->port] = 0;
del_timer(&moxaEmptyTimer[ch->port]);
moxaEmptyTimer[ch->port].expires = jiffies + HZ;
moxaEmptyTimer_on[ch->port] = 1;
add_timer(&moxaEmptyTimer[ch->port]);
- restore_flags(flags);
+ spin_unlock_irqrestore(&moxa_lock, flags);
}
static void check_xmit_empty(unsigned long data)
{
struct tty_struct *tp;
struct termios *ts;
- int i, count, rc, space;
- unsigned char *charptr, *flagptr;
unsigned long flags;
ts = NULL;
MoxaPortFlushData(ch->port, 0);
return;
}
- space = TTY_FLIPBUF_SIZE - tp->flip.count;
- if (space <= 0)
- return;
- charptr = tp->flip.char_buf_ptr;
- flagptr = tp->flip.flag_buf_ptr;
- rc = tp->flip.count;
- save_flags(flags);
- cli();
- count = MoxaPortReadData(ch->port, charptr, space);
- restore_flags(flags);
- for (i = 0; i < count; i++)
- *flagptr++ = 0;
- charptr += count;
- rc += count;
- tp->flip.count = rc;
- tp->flip.char_buf_ptr = charptr;
- tp->flip.flag_buf_ptr = flagptr;
- tty_schedule_flip(ch->tty);
+ spin_lock_irqsave(&moxa_lock, flags);
+ MoxaPortReadData(ch->port, tp);
+ spin_unlock_irqrestore(&moxa_lock, flags);
+ tty_schedule_flip(tp);
}
#define Magic_code 0x404
* 14. MoxaPortDCDON(int port); *
* 15. MoxaPortFlushData(int port, int mode); *
* 16. MoxaPortWriteData(int port, unsigned char * buffer, int length); *
- * 17. MoxaPortReadData(int port, unsigned char * buffer, int length); *
+ * 17. MoxaPortReadData(int port, struct tty_struct *tty); *
* 18. MoxaPortTxBufSize(int port); *
* 19. MoxaPortRxBufSize(int port); *
* 20. MoxaPortTxQueue(int port); *
*
* Function 21: Read data.
* Syntax:
- * int MoxaPortReadData(int port, unsigned char * buffer, int length);
+ * int MoxaPortReadData(int port, struct tty_struct *tty);
* int port : port number (0 - 127)
- * unsigned char * buffer : pointer to read data buffer.
- * int length : read data buffer length
+ * struct tty_struct *tty : tty for data
*
* return: 0 - length : real read data length
*
return (total);
}
-int MoxaPortReadData(int port, unsigned char * buffer, int space)
+int MoxaPortReadData(int port, struct tty_struct *tty)
{
register ushort head, pageofs;
int i, count, cnt, len, total, remain;
count = (tail >= head) ? (tail - head)
: (tail - head + rx_mask + 1);
if (count == 0)
- return (0);
+ return 0;
- total = (space > count) ? count : space;
+ total = count;
remain = count - total;
moxaLog.rxcnt[port] += total;
count = total;
len = (count > len) ? len : count;
ofs = baseAddr + DynPage_addr + bufhead + head;
for (i = 0; i < len; i++)
- *buffer++ = readb(ofs + i);
+ tty_insert_flip_char(tty, readb(ofs + i), TTY_NORMAL);
head = (head + len) & rx_mask;
count -= len;
}
writew(pageno, baseAddr + Control_reg);
ofs = baseAddr + DynPage_addr + pageofs;
for (i = 0; i < cnt; i++)
- *buffer++ = readb(ofs + i);
+ tty_insert_flip_char(tty, readb(ofs + i), TTY_NORMAL);
if (count == 0) {
writew((head + len) & rx_mask, ofsAddr + RXrptr);
break;
spin_lock_irqsave(&info->slock, flags);
- recv_room = tty->ldisc.receive_room(tty);
+ recv_room = tty->receive_room;
if ((recv_room == 0) && (!info->ldisc_stop_rx)) {
//mxser_throttle(tty);
mxser_stoprx(tty);
.ioctl = n_hdlc_tty_ioctl,
.poll = n_hdlc_tty_poll,
.receive_buf = n_hdlc_tty_receive,
- .receive_room = n_hdlc_tty_room,
.write_wakeup = n_hdlc_tty_wakeup,
};
tty->disc_data = n_hdlc;
n_hdlc->tty = tty;
+ tty->receive_room = 65536;
#if defined(TTY_NO_WRITE_SPLIT)
/* change tty_io write() to not split large writes into 8K chunks */
} /* end of n_hdlc_tty_wakeup() */
-/**
- * n_hdlc_tty_room - Return the amount of space left in the receiver's buffer
- * @tty - pointer to associated tty instance data
- *
- * Callback function from tty driver. Return the amount of space left in the
- * receiver's buffer to decide if remote transmitter is to be throttled.
- */
-static int n_hdlc_tty_room(struct tty_struct *tty)
-{
- if (debuglevel >= DEBUG_LEVEL_INFO)
- printk("%s(%d)n_hdlc_tty_room() called\n",__FILE__,__LINE__);
- /* always return a larger number to prevent */
- /* throttling of remote transmitter. */
- return 65536;
-} /* end of n_hdlc_tty_root() */
-
/**
* n_hdlc_tty_receive - Called by tty driver when receive data is available
* @tty - pointer to tty instance data
struct poll_table_struct *wait);
static void r3964_receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count);
-static int r3964_receive_room(struct tty_struct *tty);
static struct tty_ldisc tty_ldisc_N_R3964 = {
.owner = THIS_MODULE,
.set_termios = r3964_set_termios,
.poll = r3964_poll,
.receive_buf = r3964_receive_buf,
- .receive_room = r3964_receive_room,
};
pInfo->nRetry = 0;
tty->disc_data = pInfo;
+ tty->receive_room = 65536;
init_timer(&pInfo->tmr);
pInfo->tmr.data = (unsigned long)pInfo;
}
}
-static int r3964_receive_room(struct tty_struct *tty)
-{
- TRACE_L("receive_room");
- return -1;
-}
-
-
MODULE_LICENSE("GPL");
MODULE_ALIAS_LDISC(N_R3964);
free_page((unsigned long) buf);
}
-static inline void put_tty_queue_nolock(unsigned char c, struct tty_struct *tty)
+/**
+ * n_tty_set__room - receive space
+ * @tty: terminal
+ *
+ * Called by the driver to find out how much data it is
+ * permitted to feed to the line discipline without any being lost
+ * and thus to manage flow control. Not serialized. Answers for the
+ * "instant".
+ */
+
+static void n_tty_set_room(struct tty_struct *tty)
+{
+ int left = N_TTY_BUF_SIZE - tty->read_cnt - 1;
+
+ /*
+ * If we are doing input canonicalization, and there are no
+ * pending newlines, let characters through without limit, so
+ * that erase characters will be handled. Other excess
+ * characters will be beeped.
+ */
+ if (left <= 0)
+ left = tty->icanon && !tty->canon_data;
+ tty->receive_room = left;
+}
+
+static void put_tty_queue_nolock(unsigned char c, struct tty_struct *tty)
{
if (tty->read_cnt < N_TTY_BUF_SIZE) {
tty->read_buf[tty->read_head] = c;
}
}
-static inline void put_tty_queue(unsigned char c, struct tty_struct *tty)
+static void put_tty_queue(unsigned char c, struct tty_struct *tty)
{
unsigned long flags;
/*
spin_unlock_irqrestore(&tty->read_lock, flags);
tty->canon_head = tty->canon_data = tty->erasing = 0;
memset(&tty->read_flags, 0, sizeof tty->read_flags);
+ n_tty_set_room(tty);
check_unthrottle(tty);
}
put_tty_queue(c, tty);
}
-/**
- * n_tty_receive_room - receive space
- * @tty: terminal
- *
- * Called by the driver to find out how much data it is
- * permitted to feed to the line discipline without any being lost
- * and thus to manage flow control. Not serialized. Answers for the
- * "instant".
- */
-
-static int n_tty_receive_room(struct tty_struct *tty)
-{
- int left = N_TTY_BUF_SIZE - tty->read_cnt - 1;
-
- /*
- * If we are doing input canonicalization, and there are no
- * pending newlines, let characters through without limit, so
- * that erase characters will be handled. Other excess
- * characters will be beeped.
- */
- if (left <= 0)
- left = tty->icanon && !tty->canon_data;
- return left;
-}
/**
* n_tty_write_wakeup - asynchronous I/O notifier
tty->driver->flush_chars(tty);
}
+ n_tty_set_room(tty);
+
if (!tty->icanon && (tty->read_cnt >= tty->minimum_to_wake)) {
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
if (waitqueue_active(&tty->read_wait))
* mode. We don't want to throttle the driver if we're in
* canonical mode and don't have a newline yet!
*/
- if (n_tty_receive_room(tty) < TTY_THRESHOLD_THROTTLE) {
+ if (tty->receive_room < TTY_THRESHOLD_THROTTLE) {
/* check TTY_THROTTLED first so it indicates our state */
if (!test_and_set_bit(TTY_THROTTLED, &tty->flags) &&
tty->driver->throttle)
if (test_bit(TTY_HW_COOK_IN, &tty->flags)) {
tty->raw = 1;
tty->real_raw = 1;
+ n_tty_set_room(tty);
return;
}
if (I_ISTRIP(tty) || I_IUCLC(tty) || I_IGNCR(tty) ||
else
tty->real_raw = 0;
}
+ n_tty_set_room(tty);
}
/**
*
*/
-static inline int copy_from_read_buf(struct tty_struct *tty,
+static int copy_from_read_buf(struct tty_struct *tty,
unsigned char __user **b,
size_t *nr)
retval = -ERESTARTSYS;
break;
}
+ n_tty_set_room(tty);
clear_bit(TTY_DONT_FLIP, &tty->flags);
timeout = schedule_timeout(timeout);
set_bit(TTY_DONT_FLIP, &tty->flags);
} else if (test_and_clear_bit(TTY_PUSH, &tty->flags))
goto do_it_again;
+ n_tty_set_room(tty);
+
return retval;
}
normal_poll, /* poll */
NULL, /* hangup */
n_tty_receive_buf, /* receive_buf */
- n_tty_receive_room, /* receive_room */
n_tty_write_wakeup /* write_wakeup */
};
static void rx_ready_async(MGSLPC_INFO *info, int tcd)
{
- unsigned char data, status;
+ unsigned char data, status, flag;
int fifo_count;
+ int work = 0;
struct tty_struct *tty = info->tty;
struct mgsl_icount *icount = &info->icount;
fifo_count = 32;
} else
fifo_count = 32;
-
+
+ tty_buffer_request_room(tty, fifo_count);
/* Flush received async data to receive data buffer. */
while (fifo_count) {
data = read_reg(info, CHA + RXFIFO);
status = read_reg(info, CHA + RXFIFO);
fifo_count -= 2;
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- break;
-
- *tty->flip.char_buf_ptr = data;
icount->rx++;
-
- *tty->flip.flag_buf_ptr = 0;
+ flag = TTY_NORMAL;
// if no frameing/crc error then save data
// BIT7:parity error
status &= info->read_status_mask;
if (status & BIT7)
- *tty->flip.flag_buf_ptr = TTY_PARITY;
+ flag = TTY_PARITY;
else if (status & BIT6)
- *tty->flip.flag_buf_ptr = TTY_FRAME;
+ flag = TTY_FRAME;
}
-
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
+ work += tty_insert_flip_char(tty, data, flag);
}
issue_command(info, CHA, CMD_RXFIFO);
if (debug_level >= DEBUG_LEVEL_ISR) {
- printk("%s(%d):rx_ready_async count=%d\n",
- __FILE__,__LINE__,tty->flip.count);
+ printk("%s(%d):rx_ready_async",
+ __FILE__,__LINE__);
printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
__FILE__,__LINE__,icount->rx,icount->brk,
icount->parity,icount->frame,icount->overrun);
}
- if (tty->flip.count)
+ if (work)
tty_flip_buffer_push(tty);
}
if (!to || tty->stopped)
return 0;
- c = to->ldisc.receive_room(to);
+ c = to->receive_room;
if (c > count)
c = count;
to->ldisc.receive_buf(to, buf, NULL, c);
if (!to || tty->stopped)
return 0;
- return to->ldisc.receive_room(to);
+ return to->receive_room;
}
/*
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/string.h>
struct PKT *PacketP;
register uint DataCnt;
uchar * ptr;
+ unsigned char *buf;
int copied =0;
static int intCount, RxIntCnt;
** and available space.
*/
- transCount = min_t(unsigned int, PacketP->len & PKT_LEN_MASK,
- TTY_FLIPBUF_SIZE - TtyP->flip.count);
+ transCount = tty_buffer_request_room(TtyP, PacketP->len & PKT_LEN_MASK);
rio_dprintk (RIO_DEBUG_REC, "port %d: Copy %d bytes\n",
PortP->PortNum, transCount);
/*
#endif
ptr = (uchar *) PacketP->data + PortP->RxDataStart;
- rio_memcpy_fromio (TtyP->flip.char_buf_ptr, ptr, transCount);
- memset(TtyP->flip.flag_buf_ptr, TTY_NORMAL, transCount);
-
+ tty_prepare_flip_string(TtyP, &buf, transCount);
+ rio_memcpy_fromio (buf, ptr, transCount);
#ifdef STATS
/*
** keep a count for statistical purposes
PortP->RxDataStart += transCount;
PacketP->len -= transCount;
copied += transCount;
- TtyP->flip.count += transCount;
- TtyP->flip.char_buf_ptr += transCount;
- TtyP->flip.flag_buf_ptr += transCount;
#ifdef ___DEBUG_IT___
#include <linux/major.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/tty_flip.h>
#include <asm/uaccess.h>
struct riscom_port *port;
struct tty_struct *tty;
unsigned char status;
- unsigned char ch;
+ unsigned char ch, flag;
if (!(port = rc_get_port(bp, "Receive")))
return;
tty = port->tty;
- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
- printk(KERN_WARNING "rc%d: port %d: Working around flip "
- "buffer overflow.\n",
- board_No(bp), port_No(port));
- return;
- }
#ifdef RC_REPORT_OVERRUN
status = rc_in(bp, CD180_RCSR);
- if (status & RCSR_OE) {
+ if (status & RCSR_OE)
port->overrun++;
-#if 0
- printk(KERN_ERR "rc%d: port %d: Overrun. Total %ld overruns\n",
- board_No(bp), port_No(port), port->overrun);
-#endif
- }
status &= port->mark_mask;
#else
status = rc_in(bp, CD180_RCSR) & port->mark_mask;
} else if (status & RCSR_BREAK) {
printk(KERN_INFO "rc%d: port %d: Handling break...\n",
board_No(bp), port_No(port));
- *tty->flip.flag_buf_ptr++ = TTY_BREAK;
+ flag = TTY_BREAK;
if (port->flags & ASYNC_SAK)
do_SAK(tty);
} else if (status & RCSR_PE)
- *tty->flip.flag_buf_ptr++ = TTY_PARITY;
+ flag = TTY_PARITY;
else if (status & RCSR_FE)
- *tty->flip.flag_buf_ptr++ = TTY_FRAME;
+ flag = TTY_FRAME;
else if (status & RCSR_OE)
- *tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
+ flag = TTY_OVERRUN;
else
- *tty->flip.flag_buf_ptr++ = 0;
+ flag = TTY_NORMAL;
- *tty->flip.char_buf_ptr++ = ch;
- tty->flip.count++;
- schedule_delayed_work(&tty->flip.work, 1);
+ tty_insert_flip_char(tty, ch, flag);
+ tty_flip_buffer_push(tty);
}
static inline void rc_receive(struct riscom_board const * bp)
#endif
while (count--) {
- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
+ if (tty_buffer_request_room(tty, 1) == 0) {
printk(KERN_WARNING "rc%d: port %d: Working around "
"flip buffer overflow.\n",
board_No(bp), port_No(port));
break;
}
- *tty->flip.char_buf_ptr++ = rc_in(bp, CD180_RDR);
- *tty->flip.flag_buf_ptr++ = 0;
- tty->flip.count++;
+ tty_insert_flip_char(tty, rc_in(bp, CD180_RDR), TTY_NORMAL);
}
- schedule_delayed_work(&tty->flip.work, 1);
+ tty_flip_buffer_push(tty);
}
static inline void rc_transmit(struct riscom_board const * bp)
{
unsigned int CharNStat;
int ToRecv, wRecv, space = 0, count;
- unsigned char *cbuf;
- char *fbuf;
+ unsigned char *cbuf, *chead;
+ char *fbuf, *fhead;
struct tty_ldisc *ld;
ld = tty_ldisc_ref(tty);
ToRecv = sGetRxCnt(cp);
- if (ld)
- space = ld->receive_room(tty);
+ space = tty->receive_room;
if (space > 2 * TTY_FLIPBUF_SIZE)
space = 2 * TTY_FLIPBUF_SIZE;
- cbuf = tty->flip.char_buf;
- fbuf = tty->flip.flag_buf;
count = 0;
#ifdef ROCKET_DEBUG_INTR
printk(KERN_INFO "rp_do_receive(%d, %d)...", ToRecv, space);
if (ToRecv > space)
ToRecv = space;
+ ToRecv = tty_prepare_flip_string_flags(tty, &chead, &fhead, ToRecv);
if (ToRecv <= 0)
goto done;
+ cbuf = chead;
+ fbuf = fhead;
+
/*
* if status indicates there are errored characters in the
* FIFO, then enter status mode (a word in FIFO holds
else if (CharNStat & STMRCVROVRH)
*fbuf++ = TTY_OVERRUN;
else
- *fbuf++ = 0;
+ *fbuf++ = TTY_NORMAL;
*cbuf++ = CharNStat & 0xff;
count++;
ToRecv--;
sInStrW(sGetTxRxDataIO(cp), (unsigned short *) cbuf, wRecv);
if (ToRecv & 1)
cbuf[ToRecv - 1] = sInB(sGetTxRxDataIO(cp));
- memset(fbuf, 0, ToRecv);
+ memset(fbuf, TTY_NORMAL, ToRecv);
cbuf += ToRecv;
fbuf += ToRecv;
count += ToRecv;
}
/* Push the data up to the tty layer */
- ld->receive_buf(tty, tty->flip.char_buf, tty->flip.flag_buf, count);
+ ld->receive_buf(tty, cbuf, fbuf, count);
done:
tty_ldisc_deref(ld);
}
int paste_selection(struct tty_struct *tty)
{
struct vc_data *vc = (struct vc_data *)tty->driver_data;
- int pasted = 0, count;
+ int pasted = 0;
+ unsigned int count;
struct tty_ldisc *ld;
DECLARE_WAITQUEUE(wait, current);
continue;
}
count = sel_buffer_lth - pasted;
- count = min(count, tty->ldisc.receive_room(tty));
+ count = min(count, tty->receive_room);
tty->ldisc.receive_buf(tty, sel_buffer + pasted, NULL, count);
pasted += count;
}
*/
struct tty_struct *tty = port->gs.tty;
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- return;
-
- tty->flip.count++;
-
#if 0
switch(err) {
case TTY_BREAK:
}
#endif
- *tty->flip.flag_buf_ptr++ = err;
- *tty->flip.char_buf_ptr++ = ch;
+ tty_insert_flip_char(tty, ch, err);
tty_flip_buffer_push(tty);
}
base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS;
return IRQ_HANDLED;
}
- if (tty->flip.count < TTY_FLIPBUF_SIZE){
- tty->flip.count++;
+ if (tty_buffer_request_room(tty, 1) != 0){
if (err & info->read_status_mask){
if(err & CyBREAK){
- *tty->flip.flag_buf_ptr++ = TTY_BREAK;
- *tty->flip.char_buf_ptr++ = data;
+ tty_insert_flip_char(tty, data, TTY_BREAK);
if (info->flags & ASYNC_SAK){
do_SAK(tty);
}
}else if(err & CyFRAME){
- *tty->flip.flag_buf_ptr++ = TTY_FRAME;
- *tty->flip.char_buf_ptr++ = data;
+ tty_insert_flip_char(tty, data, TTY_FRAME);
}else if(err & CyPARITY){
- *tty->flip.flag_buf_ptr++ = TTY_PARITY;
- *tty->flip.char_buf_ptr++ = data;
+ tty_insert_flip_char(tty, data, TTY_PARITY);
}else if(err & CyOVERRUN){
- *tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
- *tty->flip.char_buf_ptr++ = 0;
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
/*
If the flip buffer itself is
overflowing, we still loose
the next incoming character.
*/
- if(tty->flip.count < TTY_FLIPBUF_SIZE){
- tty->flip.count++;
- *tty->flip.flag_buf_ptr++ = TTY_NORMAL;
- *tty->flip.char_buf_ptr++ = data;
- }
+ tty_insert_flip_char(tty, data, TTY_NORMAL);
+ }
/* These two conditions may imply */
/* a normal read should be done. */
/* else if(data & CyTIMEOUT) */
/* else if(data & CySPECHAR) */
}else{
- *tty->flip.flag_buf_ptr++ = 0;
- *tty->flip.char_buf_ptr++ = 0;
+ tty_insert_flip_char(tty, 0, TTY_NORMAL);
}
}else{
- *tty->flip.flag_buf_ptr++ = 0;
- *tty->flip.char_buf_ptr++ = 0;
+ tty_insert_flip_char(tty, data, TTY_NORMAL);
}
}else{
/* there was a software buffer overrun
#endif
while(char_count--){
data = base_addr[CyRDR];
- if (tty->flip.count >= TTY_FLIPBUF_SIZE){
- continue;
- }
- tty->flip.count++;
- *tty->flip.flag_buf_ptr++ = TTY_NORMAL;
- *tty->flip.char_buf_ptr++ = data;
+ tty_insert_flip_char(tty, data, TTY_NORMAL);
#ifdef CYCLOM_16Y_HACK
udelay(10L);
#endif
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/mm.h>
#include <linux/serial.h>
#include <linux/fcntl.h>
struct specialix_port *port;
struct tty_struct *tty;
unsigned char status;
- unsigned char ch;
+ unsigned char ch, flag;
func_enter();
return;
}
tty = port->tty;
- dprintk (SX_DEBUG_RX, "port: %p count: %d BUFF_SIZE: %d\n",
- port, tty->flip.count, TTY_FLIPBUF_SIZE);
status = sx_in(bp, CD186x_RCSR);
/* This flip buffer check needs to be below the reading of the
status register to reset the chip's IRQ.... */
- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
+ if (tty_buffer_request_room(tty, 1) == 0) {
dprintk(SX_DEBUG_FIFO, "sx%d: port %d: Working around flip buffer overflow.\n",
board_No(bp), port_No(port));
func_exit();
} else if (status & RCSR_BREAK) {
dprintk(SX_DEBUG_RX, "sx%d: port %d: Handling break...\n",
board_No(bp), port_No(port));
- *tty->flip.flag_buf_ptr++ = TTY_BREAK;
+ flag = TTY_BREAK;
if (port->flags & ASYNC_SAK)
do_SAK(tty);
} else if (status & RCSR_PE)
- *tty->flip.flag_buf_ptr++ = TTY_PARITY;
+ flag = TTY_PARITY;
else if (status & RCSR_FE)
- *tty->flip.flag_buf_ptr++ = TTY_FRAME;
+ flag = TTY_FRAME;
else if (status & RCSR_OE)
- *tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
+ flag = TTY_OVERRUN;
else
- *tty->flip.flag_buf_ptr++ = 0;
-
- *tty->flip.char_buf_ptr++ = ch;
- tty->flip.count++;
- schedule_delayed_work(&tty->flip.work, 1);
+ flag = TTY_NORMAL;
+ if(tty_insert_flip_char(tty, ch, flag))
+ tty_flip_buffer_push(tty);
func_exit();
}
dprintk (SX_DEBUG_RX, "port: %p: count: %d\n", port, count);
port->hits[count > 8 ? 9 : count]++;
- while (count--) {
- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
- printk(KERN_INFO "sx%d: port %d: Working around flip buffer overflow.\n",
- board_No(bp), port_No(port));
- break;
- }
- *tty->flip.char_buf_ptr++ = sx_in(bp, CD186x_RDR);
- *tty->flip.flag_buf_ptr++ = 0;
- tty->flip.count++;
- }
- schedule_delayed_work(&tty->flip.work, 1);
+ tty_buffer_request_room(tty, count);
+ while (count--)
+ tty_insert_flip_char(tty, sx_in(bp, CD186x_RDR), TTY_NORMAL);
+ tty_flip_buffer_push(tty);
func_exit();
}
if (portp->tty != (struct tty_struct *) NULL) {
if (portp->tty->driver_data == portp) {
portp->stats.ttystate = portp->tty->flags;
- portp->stats.rxbuffered = portp->tty->flip.count;
+ /* No longer available as a statistic */
+ portp->stats.rxbuffered = 1; /*portp->tty->flip.count; */
if (portp->tty->termios != (struct termios *) NULL) {
portp->stats.cflags = portp->tty->termios->c_cflag;
portp->stats.iflags = portp->tty->termios->c_iflag;
if ((ioack & ACK_TYPMASK) == ACK_TYPRXGOOD) {
outb((RDCR + portp->uartaddr), ioaddr);
len = inb(ioaddr + EREG_DATA);
- if ((tty == (struct tty_struct *) NULL) ||
- (tty->flip.char_buf_ptr == (char *) NULL) ||
- ((buflen = TTY_FLIPBUF_SIZE - tty->flip.count) == 0)) {
+ if (tty == NULL || (buflen = tty_buffer_request_room(tty, len)) == 0) {
len = MIN(len, sizeof(stl_unwanted));
outb((RDSR + portp->uartaddr), ioaddr);
insb((ioaddr + EREG_DATA), &stl_unwanted[0], len);
} else {
len = MIN(len, buflen);
if (len > 0) {
+ unsigned char *ptr;
outb((RDSR + portp->uartaddr), ioaddr);
- insb((ioaddr + EREG_DATA), tty->flip.char_buf_ptr, len);
- memset(tty->flip.flag_buf_ptr, 0, len);
- tty->flip.flag_buf_ptr += len;
- tty->flip.char_buf_ptr += len;
- tty->flip.count += len;
+ tty_prepare_flip_string(tty, &ptr, len);
+ insb((ioaddr + EREG_DATA), ptr, len);
tty_schedule_flip(tty);
portp->stats.rxtotal += len;
}
portp->stats.txxoff++;
goto stl_rxalldone;
}
- if ((tty != (struct tty_struct *) NULL) &&
- ((portp->rxignoremsk & status) == 0)) {
+ if (tty != NULL && (portp->rxignoremsk & status) == 0) {
if (portp->rxmarkmsk & status) {
if (status & ST_BREAK) {
status = TTY_BREAK;
} else {
status = 0;
}
- if (tty->flip.char_buf_ptr != (char *) NULL) {
- if (tty->flip.count < TTY_FLIPBUF_SIZE) {
- *tty->flip.flag_buf_ptr++ = status;
- *tty->flip.char_buf_ptr++ = ch;
- tty->flip.count++;
- }
- tty_schedule_flip(tty);
- }
+ tty_insert_flip_char(tty, ch, status);
+ tty_schedule_flip(tty);
}
} else {
printk("STALLION: bad RX interrupt ack value=%x\n", ioack);
len = inb(ioaddr + XP_DATA) + 1;
if ((iack & IVR_TYPEMASK) == IVR_RXDATA) {
- if ((tty == (struct tty_struct *) NULL) ||
- (tty->flip.char_buf_ptr == (char *) NULL) ||
- ((buflen = TTY_FLIPBUF_SIZE - tty->flip.count) == 0)) {
+ if (tty == NULL || (buflen = tty_buffer_request_room(tty, len)) == 0) {
len = MIN(len, sizeof(stl_unwanted));
outb(GRXFIFO, (ioaddr + XP_ADDR));
insb((ioaddr + XP_DATA), &stl_unwanted[0], len);
} else {
len = MIN(len, buflen);
if (len > 0) {
+ unsigned char *ptr;
outb(GRXFIFO, (ioaddr + XP_ADDR));
- insb((ioaddr + XP_DATA), tty->flip.char_buf_ptr, len);
- memset(tty->flip.flag_buf_ptr, 0, len);
- tty->flip.flag_buf_ptr += len;
- tty->flip.char_buf_ptr += len;
- tty->flip.count += len;
+ tty_prepare_flip_string(tty, &ptr, len);
+ insb((ioaddr + XP_DATA), ptr, len);
tty_schedule_flip(tty);
portp->stats.rxtotal += len;
}
status = 0;
}
- if (tty->flip.char_buf_ptr != (char *) NULL) {
- if (tty->flip.count < TTY_FLIPBUF_SIZE) {
- *tty->flip.flag_buf_ptr++ = status;
- *tty->flip.char_buf_ptr++ = ch;
- tty->flip.count++;
- }
- tty_schedule_flip(tty);
- }
+ tty_insert_flip_char(tty, ch, status);
+ tty_schedule_flip(tty);
if (status == 0)
portp->stats.rxtotal++;
int rx_op;
struct tty_struct *tty;
int copied=0;
+ unsigned char *rp;
func_enter2 ();
tty = port->gs.tty;
sx_dprintk (SX_DEBUG_RECEIVE, "rxop=%d, c = %d.\n", rx_op, c);
/* Don't copy more bytes than there is room for in the buffer */
- if (tty->flip.count + c > TTY_FLIPBUF_SIZE)
- c = TTY_FLIPBUF_SIZE - tty->flip.count;
+
+ c = tty_prepare_flip_string(tty, &rp, c);
sx_dprintk (SX_DEBUG_RECEIVE, "c = %d.\n", c);
sx_dprintk (SX_DEBUG_RECEIVE , "Copying over %d chars. First is %d at %lx\n", c,
read_sx_byte (port->board, CHAN_OFFSET(port,hi_rxbuf) + rx_op),
CHAN_OFFSET(port, hi_rxbuf));
- memcpy_fromio (tty->flip.char_buf_ptr,
+ memcpy_fromio (rp,
port->board->base + CHAN_OFFSET(port,hi_rxbuf) + rx_op, c);
- memset(tty->flip.flag_buf_ptr, TTY_NORMAL, c);
-
- /* Update the kernel buffer end */
- tty->flip.count += c;
- tty->flip.char_buf_ptr += c;
- tty->flip.flag_buf_ptr += c;
/* This one last. ( Not essential.)
It allows the card to start putting more data into the buffer!
{
int Fifocount;
u16 status;
+ int work = 0;
unsigned char DataByte;
struct tty_struct *tty = info->tty;
struct mgsl_icount *icount = &info->icount;
/* flush the receive FIFO */
while( (Fifocount = (usc_InReg(info,RICR) >> 8)) ) {
+ int flag;
+
/* read one byte from RxFIFO */
outw( (inw(info->io_base + CCAR) & 0x0780) | (RDR+LSBONLY),
info->io_base + CCAR );
RXSTATUS_OVERRUN + RXSTATUS_BREAK_RECEIVED) )
usc_UnlatchRxstatusBits(info,RXSTATUS_ALL);
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- continue;
-
- *tty->flip.char_buf_ptr = DataByte;
icount->rx++;
- *tty->flip.flag_buf_ptr = 0;
+ flag = 0;
if ( status & (RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR +
RXSTATUS_OVERRUN + RXSTATUS_BREAK_RECEIVED) ) {
printk("rxerr=%04X\n",status);
status &= info->read_status_mask;
if (status & RXSTATUS_BREAK_RECEIVED) {
- *tty->flip.flag_buf_ptr = TTY_BREAK;
+ flag = TTY_BREAK;
if (info->flags & ASYNC_SAK)
do_SAK(tty);
} else if (status & RXSTATUS_PARITY_ERROR)
- *tty->flip.flag_buf_ptr = TTY_PARITY;
+ flag = TTY_PARITY;
else if (status & RXSTATUS_FRAMING_ERROR)
- *tty->flip.flag_buf_ptr = TTY_FRAME;
- if (status & RXSTATUS_OVERRUN) {
- /* Overrun is special, since it's
- * reported immediately, and doesn't
- * affect the current character
- */
- if (tty->flip.count < TTY_FLIPBUF_SIZE) {
- tty->flip.count++;
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- *tty->flip.flag_buf_ptr = TTY_OVERRUN;
- }
- }
+ flag = TTY_FRAME;
} /* end of if (error) */
-
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
+ tty_insert_flip_char(tty, DataByte, flag);
+ if (status & RXSTATUS_OVERRUN) {
+ /* Overrun is special, since it's
+ * reported immediately, and doesn't
+ * affect the current character
+ */
+ work += tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
}
if ( debug_level >= DEBUG_LEVEL_ISR ) {
- printk("%s(%d):mgsl_isr_receive_data flip count=%d\n",
- __FILE__,__LINE__,tty->flip.count);
printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
__FILE__,__LINE__,icount->rx,icount->brk,
icount->parity,icount->frame,icount->overrun);
}
- if ( tty->flip.count )
+ if(work)
tty_flip_buffer_push(tty);
}
unsigned char status;
struct slgt_desc *bufs = info->rbufs;
int i, count;
+ int chars = 0;
+ int stat;
+ unsigned char ch;
start = end = info->rbuf_current;
DBGDATA(info, p, count, "rx");
for(i=0 ; i < count; i+=2, p+=2) {
- if (tty) {
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- tty_flip_buffer_push(tty);
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- break;
- *tty->flip.char_buf_ptr = *p;
- *tty->flip.flag_buf_ptr = 0;
+ if (tty && chars) {
+ tty_flip_buffer_push(tty);
+ chars = 0;
}
+ ch = *p;
icount->rx++;
+ stat = 0;
+
if ((status = *(p+1) & (BIT9 + BIT8))) {
if (status & BIT9)
icount->parity++;
/* discard char if tty control flags say so */
if (status & info->ignore_status_mask)
continue;
- if (tty) {
- if (status & BIT9)
- *tty->flip.flag_buf_ptr = TTY_PARITY;
- else if (status & BIT8)
- *tty->flip.flag_buf_ptr = TTY_FRAME;
- }
+ if (status & BIT9)
+ stat = TTY_PARITY;
+ else if (status & BIT8)
+ stat = TTY_FRAME;
}
if (tty) {
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
+ tty_insert_flip_char(tty, ch, stat);
+ chars++;
}
}
break;
}
- if (tty && tty->flip.count)
+ if (tty && chars)
tty_flip_buffer_push(tty);
}
if (info->tty) {
if (!(status & info->ignore_status_mask)) {
if (info->read_status_mask & MASK_BREAK) {
- *info->tty->flip.flag_buf_ptr = TTY_BREAK;
+ tty_insert_flip_char(info->tty, 0, TTY_BREAK);
if (info->flags & ASYNC_SAK)
do_SAK(info->tty);
}
if ( tty ) {
if (!(status & info->ignore_status_mask1)) {
if (info->read_status_mask1 & BRKD) {
- *tty->flip.flag_buf_ptr = TTY_BREAK;
+ tty_insert_flip_char(tty, 0, TTY_BREAK);
if (info->flags & ASYNC_SAK)
do_SAK(tty);
}
while((status = read_reg(info,CST0)) & BIT0)
{
+ int flag = 0;
+ int over = 0;
DataByte = read_reg(info,TRB);
- if ( tty ) {
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- continue;
-
- *tty->flip.char_buf_ptr = DataByte;
- *tty->flip.flag_buf_ptr = 0;
- }
-
icount->rx++;
if ( status & (PE + FRME + OVRN) ) {
if ( tty ) {
if (status & PE)
- *tty->flip.flag_buf_ptr = TTY_PARITY;
+ flag = TTY_PARITY;
else if (status & FRME)
- *tty->flip.flag_buf_ptr = TTY_FRAME;
+ flag = TTY_FRAME;
if (status & OVRN) {
/* Overrun is special, since it's
* reported immediately, and doesn't
* affect the current character
*/
- if (tty->flip.count < TTY_FLIPBUF_SIZE) {
- tty->flip.count++;
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- *tty->flip.flag_buf_ptr = TTY_OVERRUN;
- }
+ over = 1;
}
}
} /* end of if (error) */
if ( tty ) {
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
+ tty_insert_flip_char(tty, DataByte, flag);
+ if (over)
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
}
}
if ( debug_level >= DEBUG_LEVEL_ISR ) {
- printk("%s(%d):%s isr_rxrdy() flip count=%d\n",
- __FILE__,__LINE__,info->device_name,
- tty ? tty->flip.count : 0);
printk("%s(%d):%s rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
__FILE__,__LINE__,info->device_name,
icount->rx,icount->brk,icount->parity,
icount->frame,icount->overrun);
}
- if ( tty && tty->flip.count )
+ if ( tty )
tty_flip_buffer_push(tty);
}
return tty;
}
+static void tty_buffer_free_all(struct tty_struct *);
+
static inline void free_tty_struct(struct tty_struct *tty)
{
kfree(tty->write_buf);
+ tty_buffer_free_all(tty);
kfree(tty);
}
return 0;
}
+/*
+ * Tty buffer allocation management
+ */
+
+static void tty_buffer_free_all(struct tty_struct *tty)
+{
+ struct tty_buffer *thead;
+ while((thead = tty->buf.head) != NULL) {
+ tty->buf.head = thead->next;
+ kfree(thead);
+ }
+ while((thead = tty->buf.free) != NULL) {
+ tty->buf.free = thead->next;
+ kfree(thead);
+ }
+ tty->buf.tail = NULL;
+}
+
+static void tty_buffer_init(struct tty_struct *tty)
+{
+ tty->buf.head = NULL;
+ tty->buf.tail = NULL;
+ tty->buf.free = NULL;
+}
+
+static struct tty_buffer *tty_buffer_alloc(size_t size)
+{
+ struct tty_buffer *p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC);
+ if(p == NULL)
+ return NULL;
+ p->used = 0;
+ p->size = size;
+ p->next = NULL;
+ p->char_buf_ptr = (char *)(p->data);
+ p->flag_buf_ptr = (unsigned char *)p->char_buf_ptr + size;
+/* printk("Flip create %p\n", p); */
+ return p;
+}
+
+/* Must be called with the tty_read lock held. This needs to acquire strategy
+ code to decide if we should kfree or relink a given expired buffer */
+
+static void tty_buffer_free(struct tty_struct *tty, struct tty_buffer *b)
+{
+ /* Dumb strategy for now - should keep some stats */
+/* printk("Flip dispose %p\n", b); */
+ if(b->size >= 512)
+ kfree(b);
+ else {
+ b->next = tty->buf.free;
+ tty->buf.free = b;
+ }
+}
+
+static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
+{
+ struct tty_buffer **tbh = &tty->buf.free;
+ while((*tbh) != NULL) {
+ struct tty_buffer *t = *tbh;
+ if(t->size >= size) {
+ *tbh = t->next;
+ t->next = NULL;
+ t->used = 0;
+ /* DEBUG ONLY */
+ memset(t->data, '*', size);
+/* printk("Flip recycle %p\n", t); */
+ return t;
+ }
+ tbh = &((*tbh)->next);
+ }
+ /* Round the buffer size out */
+ size = (size + 0xFF) & ~ 0xFF;
+ return tty_buffer_alloc(size);
+ /* Should possibly check if this fails for the largest buffer we
+ have queued and recycle that ? */
+}
+
+int tty_buffer_request_room(struct tty_struct *tty, size_t size)
+{
+ struct tty_buffer *b = tty->buf.head, *n;
+ int left = 0;
+
+ /* OPTIMISATION: We could keep a per tty "zero" sized buffer to
+ remove this conditional if its worth it. This would be invisible
+ to the callers */
+ if(b != NULL)
+ left = b->size - b->used;
+ if(left >= size)
+ return size;
+ /* This is the slow path - looking for new buffers to use */
+ n = tty_buffer_find(tty, size);
+ if(n == NULL)
+ return left;
+ n->next = b;
+ if(b != NULL)
+ b->next = n;
+ else
+ tty->buf.head = n;
+ tty->buf.tail = n;
+ return size;
+}
+
+EXPORT_SYMBOL_GPL(tty_buffer_request_room);
+
+int tty_insert_flip_string(struct tty_struct *tty, unsigned char *chars, size_t size)
+{
+ int copied = 0;
+ do {
+ int space = tty_buffer_request_room(tty, size - copied);
+ struct tty_buffer *tb = tty->buf.tail;
+ /* If there is no space then tb may be NULL */
+ if(unlikely(space == 0))
+ break;
+ memcpy(tb->char_buf_ptr + tb->used, chars, space);
+ memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
+ tb->used += space;
+ copied += space;
+ chars += space;
+/* printk("Flip insert %d.\n", space); */
+ }
+ /* There is a small chance that we need to split the data over
+ several buffers. If this is the case we must loop */
+ while (unlikely(size > copied));
+ return copied;
+}
+
+EXPORT_SYMBOL_GPL(tty_insert_flip_string);
+
+int tty_insert_flip_string_flags(struct tty_struct *tty, unsigned char *chars, char *flags, size_t size)
+{
+ int copied = 0;
+ do {
+ int space = tty_buffer_request_room(tty, size - copied);
+ struct tty_buffer *tb = tty->buf.tail;
+ /* If there is no space then tb may be NULL */
+ if(unlikely(space == 0))
+ break;
+ memcpy(tb->char_buf_ptr + tb->used, chars, space);
+ memcpy(tb->flag_buf_ptr + tb->used, flags, space);
+ tb->used += space;
+ copied += space;
+ chars += space;
+ flags += space;
+ }
+ /* There is a small chance that we need to split the data over
+ several buffers. If this is the case we must loop */
+ while (unlikely(size > copied));
+ return copied;
+}
+
+EXPORT_SYMBOL_GPL(tty_insert_flip_string_flags);
+
+
+/*
+ * Prepare a block of space in the buffer for data. Returns the length
+ * available and buffer pointer to the space which is now allocated and
+ * accounted for as ready for normal characters. This is used for drivers
+ * that need their own block copy routines into the buffer. There is no
+ * guarantee the buffer is a DMA target!
+ */
+
+int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars, size_t size)
+{
+ int space = tty_buffer_request_room(tty, size);
+ struct tty_buffer *tb = tty->buf.tail;
+ *chars = tb->char_buf_ptr + tb->used;
+ memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
+ tb->used += space;
+ return space;
+}
+
+EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
+
+/*
+ * Prepare a block of space in the buffer for data. Returns the length
+ * available and buffer pointer to the space which is now allocated and
+ * accounted for as ready for characters. This is used for drivers
+ * that need their own block copy routines into the buffer. There is no
+ * guarantee the buffer is a DMA target!
+ */
+
+int tty_prepare_flip_string_flags(struct tty_struct *tty, unsigned char **chars, char **flags, size_t size)
+{
+ int space = tty_buffer_request_room(tty, size);
+ struct tty_buffer *tb = tty->buf.tail;
+ *chars = tb->char_buf_ptr + tb->used;
+ *flags = tb->flag_buf_ptr + tb->used;
+ tb->used += space;
+ return space;
+}
+
+EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags);
+
+
+
/*
* This is probably overkill for real world processors but
* they are not on hot paths so a little discipline won't do
if (ld == NULL)
return -EINVAL;
+ /*
+ * No more input please, we are switching. The new ldisc
+ * will update this value in the ldisc open function
+ */
+
+ tty->receive_room = 0;
+
+ /*
+ * Problem: What do we do if this blocks ?
+ */
+
tty_wait_until_sent(tty, 0);
if (tty->ldisc.num == ldisc) {
* we say so later on.
*/
- work = cancel_delayed_work(&tty->flip.work);
+ work = cancel_delayed_work(&tty->buf.work);
/*
- * Wait for ->hangup_work and ->flip.work handlers to terminate
+ * Wait for ->hangup_work and ->buf.work handlers to terminate
*/
flush_scheduled_work();
/* Restart it in case no characters kick it off. Safe if
already running */
if (work)
- schedule_delayed_work(&tty->flip.work, 1);
+ schedule_delayed_work(&tty->buf.work, 1);
return retval;
}
*/
clear_bit(TTY_LDISC, &tty->flags);
clear_bit(TTY_DONT_FLIP, &tty->flags);
- cancel_delayed_work(&tty->flip.work);
+ cancel_delayed_work(&tty->buf.work);
/*
- * Wait for ->hangup_work and ->flip.work handlers to terminate
+ * Wait for ->hangup_work and ->buf.work handlers to terminate
*/
flush_scheduled_work();
/*
* This routine is called out of the software interrupt to flush data
- * from the flip buffer to the line discipline.
+ * from the buffer chain to the line discipline.
*/
static void flush_to_ldisc(void *private_)
{
struct tty_struct *tty = (struct tty_struct *) private_;
- unsigned char *cp;
- char *fp;
- int count;
unsigned long flags;
struct tty_ldisc *disc;
+ struct tty_buffer *tbuf;
disc = tty_ldisc_ref(tty);
if (disc == NULL) /* !TTY_LDISC */
/*
* Do it after the next timer tick:
*/
- schedule_delayed_work(&tty->flip.work, 1);
+ schedule_delayed_work(&tty->buf.work, 1);
goto out;
}
spin_lock_irqsave(&tty->read_lock, flags);
- if (tty->flip.buf_num) {
- cp = tty->flip.char_buf + TTY_FLIPBUF_SIZE;
- fp = tty->flip.flag_buf + TTY_FLIPBUF_SIZE;
- tty->flip.buf_num = 0;
- tty->flip.char_buf_ptr = tty->flip.char_buf;
- tty->flip.flag_buf_ptr = tty->flip.flag_buf;
- } else {
- cp = tty->flip.char_buf;
- fp = tty->flip.flag_buf;
- tty->flip.buf_num = 1;
- tty->flip.char_buf_ptr = tty->flip.char_buf + TTY_FLIPBUF_SIZE;
- tty->flip.flag_buf_ptr = tty->flip.flag_buf + TTY_FLIPBUF_SIZE;
- }
- count = tty->flip.count;
- tty->flip.count = 0;
+ while((tbuf = tty->buf.head) != NULL) {
+ tty->buf.head = tbuf->next;
+ spin_unlock_irqrestore(&tty->read_lock, flags);
+ /* printk("Process buffer %p for %d\n", tbuf, tbuf->used); */
+ disc->receive_buf(tty, tbuf->char_buf_ptr,
+ tbuf->flag_buf_ptr,
+ tbuf->used);
+ spin_lock_irqsave(&tty->read_lock, flags);
+ tty_buffer_free(tty, tbuf);
+ }
+ tty->buf.tail = NULL;
spin_unlock_irqrestore(&tty->read_lock, flags);
-
- disc->receive_buf(tty, cp, fp, count);
out:
tty_ldisc_deref(disc);
}
if (tty->low_latency)
flush_to_ldisc((void *) tty);
else
- schedule_delayed_work(&tty->flip.work, 1);
+ schedule_delayed_work(&tty->buf.work, 1);
}
EXPORT_SYMBOL(tty_flip_buffer_push);
+
/*
* This subroutine initializes a tty structure.
*/
tty_ldisc_assign(tty, tty_ldisc_get(N_TTY));
tty->pgrp = -1;
tty->overrun_time = jiffies;
- tty->flip.char_buf_ptr = tty->flip.char_buf;
- tty->flip.flag_buf_ptr = tty->flip.flag_buf;
- INIT_WORK(&tty->flip.work, flush_to_ldisc, tty);
- init_MUTEX(&tty->flip.pty_sem);
+ tty->buf.head = tty->buf.tail = NULL;
+ tty_buffer_init(tty);
+ INIT_WORK(&tty->buf.work, flush_to_ldisc, tty);
+ init_MUTEX(&tty->buf.pty_sem);
init_MUTEX(&tty->termios_sem);
init_waitqueue_head(&tty->write_wait);
init_waitqueue_head(&tty->read_wait);
* Don't attempt to copy more data into the buffer than we
* have room for because it would fail without indication.
*/
- if ((tty->flip.count + 1) > TTY_FLIPBUF_SIZE) {
+ if(tty_insert_flip_char(tty, cevent->data[index], TTY_NORMAL) == 0) {
printk(VIOCONS_KERN_WARN "input buffer overflow!\n");
break;
}
- tty_insert_flip_char(tty, cevent->data[index], TTY_NORMAL);
}
/* if cevent->len == 0 then no data was added to the buffer and flip.count == 0 */
SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
return IRQ_HANDLED;
}
- if (tty->flip.count < TTY_FLIPBUF_SIZE) {
- *tty->flip.char_buf_ptr = ch;
- *tty->flip.flag_buf_ptr = 0;
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
- }
+ tty_insert_flip_char(tty, ch, 0);
/* Check if another character is already ready; in that case, the
* spcond_int() function must be used, because this character may have an
else
err = 0;
- if (tty->flip.count < TTY_FLIPBUF_SIZE) {
- *tty->flip.char_buf_ptr = ch;
- *tty->flip.flag_buf_ptr = err;
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
- }
+ tty_insert_flip_char(tty, ch, err);
/* ++TeSche: *All* errors have to be cleared manually,
* else the condition persists for the next chars
init_waitqueue_head(&serport->wait);
tty->disc_data = serport;
+ tty->receive_room = 256;
set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
return 0;
spin_unlock_irqrestore(&serport->lock, flags);
}
-/*
- * serport_ldisc_room() reports how much room we do have for receiving data.
- * Although we in fact have infinite room, we need to specify some value
- * here, and 256 seems to be reasonable.
- */
-
-static int serport_ldisc_room(struct tty_struct *tty)
-{
- return 256;
-}
-
/*
* serport_ldisc_read() just waits indefinitely if everything goes well.
* However, when the serio driver closes the serio port, it finishes,
.read = serport_ldisc_read,
.ioctl = serport_ldisc_ioctl,
.receive_buf = serport_ldisc_receive,
- .receive_room = serport_ldisc_room,
.write_wakeup = serport_ldisc_write_wakeup
};
#endif
goto bad;
}
- if (ld->receive_room &&
- ld->receive_room(mp->tty) < datalen) {
+ if (mp->tty->receive_room < datalen) {
#if defined(_DEBUG_DATAFLOW) || defined(_DEBUG_TTYFUNCS)
printk(KERN_DEBUG "capi: no room in tty\n");
#endif
return count;
}
+/*
+ * isdn_readbchan_tty() tries to get data from the read-queue.
+ * It MUST be called with interrupts off.
+ *
+ * Be aware that this is not an atomic operation when sleep != 0, even though
+ * interrupts are turned off! Well, like that we are currently only called
+ * on behalf of a read system call on raw device files (which are documented
+ * to be dangerous and for for debugging purpose only). The inode semaphore
+ * takes care that this is not called for the same minor device number while
+ * we are sleeping, but access is not serialized against simultaneous read()
+ * from the corresponding ttyI device. Can other ugly events, like changes
+ * of the mapping (di,ch)<->minor, happen during the sleep? --he
+ */
+int
+isdn_readbchan_tty(int di, int channel, struct tty_struct *tty, int cisco_hack)
+{
+ int count;
+ int count_pull;
+ int count_put;
+ int dflag;
+ struct sk_buff *skb;
+ char last = 0;
+ int len;
+
+ if (!dev->drv[di])
+ return 0;
+ if (skb_queue_empty(&dev->drv[di]->rpqueue[channel]))
+ return 0;
+
+ len = tty_buffer_request_room(tty, dev->drv[di]->rcvcount[channel]);
+ if(len == 0)
+ return len;
+
+ count = 0;
+ while (len) {
+ if (!(skb = skb_peek(&dev->drv[di]->rpqueue[channel])))
+ break;
+#ifdef CONFIG_ISDN_AUDIO
+ if (ISDN_AUDIO_SKB_LOCK(skb))
+ break;
+ ISDN_AUDIO_SKB_LOCK(skb) = 1;
+ if ((ISDN_AUDIO_SKB_DLECOUNT(skb)) || (dev->drv[di]->DLEflag & (1 << channel))) {
+ char *p = skb->data;
+ unsigned long DLEmask = (1 << channel);
+
+ dflag = 0;
+ count_pull = count_put = 0;
+ while ((count_pull < skb->len) && (len > 0)) {
+ len--;
+ if (dev->drv[di]->DLEflag & DLEmask) {
+ last = DLE;
+ dev->drv[di]->DLEflag &= ~DLEmask;
+ } else {
+ last = *p;
+ if (last == DLE) {
+ dev->drv[di]->DLEflag |= DLEmask;
+ (ISDN_AUDIO_SKB_DLECOUNT(skb))--;
+ }
+ p++;
+ count_pull++;
+ }
+ count_put++;
+ }
+ if (count_pull >= skb->len)
+ dflag = 1;
+ } else {
+#endif
+ /* No DLE's in buff, so simply copy it */
+ dflag = 1;
+ if ((count_pull = skb->len) > len) {
+ count_pull = len;
+ dflag = 0;
+ }
+ count_put = count_pull;
+ if(count_put > 1)
+ tty_insert_flip_string(tty, skb->data, count_put - 1);
+ last = skb->data[count_put] - 1;
+ len -= count_put;
+#ifdef CONFIG_ISDN_AUDIO
+ }
+#endif
+ count += count_put;
+ if (dflag) {
+ /* We got all the data in this buff.
+ * Now we can dequeue it.
+ */
+ if(cisco_hack)
+ tty_insert_flip_char(tty, last, 0xFF);
+ else
+ tty_insert_flip_char(tty, last, TTY_NORMAL);
+#ifdef CONFIG_ISDN_AUDIO
+ ISDN_AUDIO_SKB_LOCK(skb) = 0;
+#endif
+ skb = skb_dequeue(&dev->drv[di]->rpqueue[channel]);
+ dev_kfree_skb(skb);
+ } else {
+ tty_insert_flip_char(tty, last, TTY_NORMAL);
+ /* Not yet emptied this buff, so it
+ * must stay in the queue, for further calls
+ * but we pull off the data we got until now.
+ */
+ skb_pull(skb, count_pull);
+#ifdef CONFIG_ISDN_AUDIO
+ ISDN_AUDIO_SKB_LOCK(skb) = 0;
+#endif
+ }
+ dev->drv[di]->rcvcount[channel] -= count_put;
+ }
+ return count;
+}
+
+
static __inline int
isdn_minor2drv(int minor)
{
extern void isdn_unexclusive_channel(int di, int ch);
extern int isdn_getnum(char **);
extern int isdn_readbchan(int, int, u_char *, u_char *, int, wait_queue_head_t *);
+extern int isdn_readbchan_tty(int, int, struct tty_struct *, int);
extern int isdn_get_free_channel(int, int, int, int, int, char *);
extern int isdn_writebuf_skb_stub(int, int, int, struct sk_buff *);
extern int register_isdn(isdn_if * i);
int c;
int len;
struct tty_struct *tty;
+ char last;
if (info->online) {
if ((tty = info->tty)) {
if (info->mcr & UART_MCR_RTS) {
- c = TTY_FLIPBUF_SIZE - tty->flip.count;
len = skb->len
#ifdef CONFIG_ISDN_AUDIO
+ ISDN_AUDIO_SKB_DLECOUNT(skb)
#endif
;
+
+ c = tty_buffer_request_room(tty, len);
if (c >= len) {
#ifdef CONFIG_ISDN_AUDIO
- if (ISDN_AUDIO_SKB_DLECOUNT(skb))
- while (skb->len--) {
+ if (ISDN_AUDIO_SKB_DLECOUNT(skb)) {
+ int l = skb->len;
+ unsigned char *dp = skb->data;
+ while (--l) {
if (*skb->data == DLE)
tty_insert_flip_char(tty, DLE, 0);
- tty_insert_flip_char(tty, *skb->data++, 0);
+ tty_insert_flip_char(tty, *dp++, 0);
+ }
+ last = *dp;
} else {
#endif
- memcpy(tty->flip.char_buf_ptr,
- skb->data, len);
- tty->flip.count += len;
- tty->flip.char_buf_ptr += len;
- memset(tty->flip.flag_buf_ptr, 0, len);
- tty->flip.flag_buf_ptr += len;
+ if(len > 1)
+ tty_insert_flip_string(tty, skb->data, len - 1);
+ last = skb->data[len - 1];
#ifdef CONFIG_ISDN_AUDIO
}
#endif
if (info->emu.mdmreg[REG_CPPP] & BIT_CPPP)
- tty->flip.flag_buf_ptr[len - 1] = 0xff;
- schedule_delayed_work(&tty->flip.work, 1);
+ tty_insert_flip_char(tty, last, 0xFF);
+ else
+ tty_insert_flip_char(tty, last, TTY_NORMAL);
+ tty_flip_buffer_push(tty);
kfree_skb(skb);
return 1;
}
int resched = 0;
int midx;
int i;
- int c;
int r;
struct tty_struct *tty;
modem_info *info;
#endif
if ((tty = info->tty)) {
if (info->mcr & UART_MCR_RTS) {
- c = TTY_FLIPBUF_SIZE - tty->flip.count;
- if (c > 0) {
- r = isdn_readbchan(info->isdn_driver, info->isdn_channel,
- tty->flip.char_buf_ptr,
- tty->flip.flag_buf_ptr, c, NULL);
- /* CISCO AsyncPPP Hack */
- if (!(info->emu.mdmreg[REG_CPPP] & BIT_CPPP))
- memset(tty->flip.flag_buf_ptr, 0, r);
- tty->flip.count += r;
- tty->flip.flag_buf_ptr += r;
- tty->flip.char_buf_ptr += r;
- if (r)
- schedule_delayed_work(&tty->flip.work, 1);
- }
+ /* CISCO AsyncPPP Hack */
+ if (!(info->emu.mdmreg[REG_CPPP] & BIT_CPPP))
+ r = isdn_readbchan_tty(info->isdn_driver, info->isdn_channel, tty, 0);
+ else
+ r = isdn_readbchan_tty(info->isdn_driver, info->isdn_channel, tty, 1);
+ if (r)
+ tty_flip_buffer_push(tty);
} else
r = 1;
} else
}
#endif
#endif
- /* Try to deliver directly via tty-flip-buf if queue is empty */
+ /* Try to deliver directly via tty-buf if queue is empty */
spin_lock_irqsave(&info->readlock, flags);
if (skb_queue_empty(&dev->drv[di]->rpqueue[channel]))
if (isdn_tty_try_read(info, skb)) {
/* The next routine is called once from within timer-interrupt
* triggered within isdn_tty_modem_ncarrier(). It calls
* isdn_tty_modem_result() to stuff a "NO CARRIER" Message
- * into the tty's flip-buffer.
+ * into the tty's buffer.
*/
static void
isdn_tty_modem_do_ncarrier(unsigned long data)
u_long flags;
struct sk_buff *skb = NULL;
char *sp = NULL;
+ int l = strlen(msg);
if (!msg) {
printk(KERN_WARNING "isdn_tty: Null-Message in isdn_tty_at_cout\n");
return;
}
- /* use queue instead of direct flip, if online and */
- /* data is in queue or flip buffer is full */
- if ((info->online) && (((tty->flip.count + strlen(msg)) >= TTY_FLIPBUF_SIZE) ||
- (!skb_queue_empty(&dev->drv[info->isdn_driver]->rpqueue[info->isdn_channel])))) {
- skb = alloc_skb(strlen(msg), GFP_ATOMIC);
+ /* use queue instead of direct, if online and */
+ /* data is in queue or buffer is full */
+ if ((info->online && tty_buffer_request_room(tty, l) < l) ||
+ (!skb_queue_empty(&dev->drv[info->isdn_driver]->rpqueue[info->isdn_channel]))) {
+ skb = alloc_skb(l, GFP_ATOMIC);
if (!skb) {
spin_unlock_irqrestore(&info->readlock, flags);
return;
}
- sp = skb_put(skb, strlen(msg));
+ sp = skb_put(skb, l);
#ifdef CONFIG_ISDN_AUDIO
ISDN_AUDIO_SKB_DLECOUNT(skb) = 0;
ISDN_AUDIO_SKB_LOCK(skb) = 0;
if (skb) {
*sp++ = c;
} else {
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ if(tty_insert_flip_char(tty, c, TTY_NORMAL) == 0)
break;
- tty_insert_flip_char(tty, c, 0);
}
}
if (skb) {
dev->drv[info->isdn_driver]->rcvcount[info->isdn_channel] += skb->len;
spin_unlock_irqrestore(&info->readlock, flags);
/* Schedule dequeuing */
- if ((dev->modempoll) && (info->rcvsched))
+ if (dev->modempoll && info->rcvsched)
isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 1);
} else {
spin_unlock_irqrestore(&info->readlock, flags);
- schedule_delayed_work(&tty->flip.work, 1);
+ tty_flip_buffer_push(tty);
}
}
/* ----------------------------------------------------------------------- */
-static int sixpack_receive_room(struct tty_struct *tty)
-{
- return 65536; /* We can handle an infinite amount of data. :-) */
-}
-
/*
* Handle the 'receiver data ready' interrupt.
* This function is called by the 'tty_io' module in the kernel when
/* Done. We have linked the TTY line to a channel. */
tty->disc_data = sp;
+ tty->receive_room = 65536;
/* Now we're ready to register. */
if (register_netdev(dev))
.close = sixpack_close,
.ioctl = sixpack_ioctl,
.receive_buf = sixpack_receive_buf,
- .receive_room = sixpack_receive_room,
.write_wakeup = sixpack_write_wakeup,
};
ax->tty = tty;
tty->disc_data = ax;
+ tty->receive_room = 65535;
if (tty->driver->flush_buffer)
tty->driver->flush_buffer(tty);
tty->driver->unthrottle(tty);
}
-static int mkiss_receive_room(struct tty_struct *tty)
-{
- return 65536; /* We can handle an infinite amount of data. :-) */
-}
-
/*
* Called by the driver when there's room for more data. If we have
* more packets to send, we send them here.
.close = mkiss_close,
.ioctl = mkiss_ioctl,
.receive_buf = mkiss_receive_buf,
- .receive_room = mkiss_receive_room,
.write_wakeup = mkiss_write_wakeup
};
sirdev_receive(dev, cp, count);
}
-/*
- * Function irtty_receive_room (tty)
- *
- * Used by the TTY to find out how much data we can receive at a time
- *
-*/
-static int irtty_receive_room(struct tty_struct *tty)
-{
- struct sirtty_cb *priv = tty->disc_data;
-
- IRDA_ASSERT(priv != NULL, return 0;);
- IRDA_ASSERT(priv->magic == IRTTY_MAGIC, return 0;);
-
- return 65536; /* We can handle an infinite amount of data. :-) */
-}
-
/*
* Function irtty_write_wakeup (tty)
*
dev->priv = priv;
tty->disc_data = priv;
+ tty->receive_room = 65536;
up(&irtty_sem);
.ioctl = irtty_ioctl,
.poll = NULL,
.receive_buf = irtty_receive_buf,
- .receive_room = irtty_receive_room,
.write_wakeup = irtty_write_wakeup,
.owner = THIS_MODULE,
};
goto out_free;
tty->disc_data = ap;
-
+ tty->receive_room = 65536;
return 0;
out_free:
return 0;
}
-static int
-ppp_asynctty_room(struct tty_struct *tty)
-{
- return 65535;
-}
-
/*
* This can now be called from hard interrupt level as well
* as soft interrupt level or mainline.
.write = ppp_asynctty_write,
.ioctl = ppp_asynctty_ioctl,
.poll = ppp_asynctty_poll,
- .receive_room = ppp_asynctty_room,
.receive_buf = ppp_asynctty_receive,
.write_wakeup = ppp_asynctty_wakeup,
};
goto out_free;
tty->disc_data = ap;
-
+ tty->receive_room = 65536;
return 0;
out_free:
return 0;
}
-static int
-ppp_sync_room(struct tty_struct *tty)
-{
- return 65535;
-}
-
/*
* This can now be called from hard interrupt level as well
* as soft interrupt level or mainline.
.write = ppp_sync_write,
.ioctl = ppp_synctty_ioctl,
.poll = ppp_sync_poll,
- .receive_room = ppp_sync_room,
.receive_buf = ppp_sync_receive,
.write_wakeup = ppp_sync_wakeup,
};
******************************************/
-static int slip_receive_room(struct tty_struct *tty)
-{
- return 65536; /* We can handle an infinite amount of data. :-) */
-}
-
/*
* Handle the 'receiver data ready' interrupt.
* This function is called by the 'tty_io' module in the kernel when
sl->line = tty_devnum(tty);
sl->pid = current->pid;
- /* FIXME: already done before we were called - seems this can go */
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
-
if (!test_bit(SLF_INUSE, &sl->flags)) {
/* Perform the low-level SLIP initialization. */
if ((err = sl_alloc_bufs(sl, SL_MTU)) != 0)
/* Done. We have linked the TTY line to a channel. */
rtnl_unlock();
+ tty->receive_room = 65536; /* We don't flow control */
return sl->dev->base_addr;
err_free_bufs:
.close = slip_close,
.ioctl = slip_ioctl,
.receive_buf = slip_receive_buf,
- .receive_room = slip_receive_room,
.write_wakeup = slip_write_wakeup,
};
}
}
cpc_tty->buf_rx.first = cpc_tty->buf_rx.first->next;
- kfree(buf);
+ kfree((void *)buf);
buf = cpc_tty->buf_rx.first;
flg_rx = 1;
}
return 0;
}
-static int x25_asy_receive_room(struct tty_struct *tty)
-{
- return 65536; /* We can handle an infinite amount of data. :-) */
-}
-
/*
* Handle the 'receiver data ready' interrupt.
* This function is called by the 'tty_io' module in the kernel when
sl->tty = tty;
tty->disc_data = sl;
+ tty->receive_room = 65536;
if (tty->driver->flush_buffer) {
tty->driver->flush_buffer(tty);
}
.close = x25_asy_close_tty,
.ioctl = x25_asy_ioctl,
.receive_buf = x25_asy_receive_buf,
- .receive_room = x25_asy_receive_room,
.write_wakeup = x25_asy_write_wakeup,
};
/************************************************************************/
/* Receiving routines */
-static int strip_receive_room(struct tty_struct *tty)
-{
- return 0x10000; /* We can handle an infinite amount of data. :-) */
-}
-
/*
* This function parses the response to the ATS300? command,
* extracting the radio version and serial number.
/*
* Here's the order things happen:
* When the user runs "slattach -p strip ..."
- * 1. The TTY module calls strip_open
+ * 1. The TTY module calls strip_open;;
* 2. strip_open calls strip_alloc
* 3. strip_alloc calls register_netdev
* 4. register_netdev calls strip_dev_init
strip_info->tty = tty;
tty->disc_data = strip_info;
+ tty->receive_room = 65536;
+
if (tty->driver->flush_buffer)
tty->driver->flush_buffer(tty);
.close = strip_close,
.ioctl = strip_ioctl,
.receive_buf = strip_receive_buf,
- .receive_room = strip_receive_room,
.write_wakeup = strip_write_some_more,
};
#include <linux/types.h>
#include <linux/kdev_t.h>
#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/vt_kern.h>
#include <linux/init.h>
#include <linux/console.h>
if (count > slen)
count = slen;
} else
- if (count >= TTY_FLIPBUF_SIZE - tty->flip.count)
- count = TTY_FLIPBUF_SIZE - tty->flip.count - 1;
EBCASC(raw->inbuf, count);
cchar = ctrlchar_handle(raw->inbuf, count, tty);
switch (cchar & CTRLCHAR_MASK) {
break;
case CTRLCHAR_CTRL:
- tty->flip.count++;
- *tty->flip.flag_buf_ptr++ = TTY_NORMAL;
- *tty->flip.char_buf_ptr++ = cchar;
+ tty_insert_flip_char(tty, cchar, TTY_NORMAL);
tty_flip_buffer_push(raw->tty);
break;
case CTRLCHAR_NONE:
- memcpy(tty->flip.char_buf_ptr,
- raw->inbuf, count);
if (count < 2 ||
- (strncmp(raw->inbuf+count-2, "^n", 2) &&
- strncmp(raw->inbuf+count-2, "\252n", 2)) ) {
- /* don't add the auto \n */
- tty->flip.char_buf_ptr[count] = '\n';
- memset(tty->flip.flag_buf_ptr,
- TTY_NORMAL, count + 1);
+ (strncmp(raw->inbuf+count-2, "\252n", 2) &&
+ strncmp(raw->inbuf+count-2, "^n", 2)) ) {
+ /* add the auto \n */
+ raw->inbuf[count] = '\n';
count++;
} else
- count-=2;
- tty->flip.char_buf_ptr += count;
- tty->flip.flag_buf_ptr += count;
- tty->flip.count += count;
+ count -= 2;
+ tty_insert_flip_string(tty, raw->inbuf, count);
tty_flip_buffer_push(raw->tty);
break;
}
#include <linux/kmod.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
#include <linux/sched.h>
#include <linux/wait.h>
#include <linux/slab.h>
case CTRLCHAR_SYSRQ:
break;
case CTRLCHAR_CTRL:
- sclp_tty->flip.count++;
- *sclp_tty->flip.flag_buf_ptr++ = TTY_NORMAL;
- *sclp_tty->flip.char_buf_ptr++ = cchar;
+ tty_insert_flip_char(sclp_tty, cchar, TTY_NORMAL);
tty_flip_buffer_push(sclp_tty);
break;
case CTRLCHAR_NONE:
/* send (normal) input to line discipline */
- memcpy(sclp_tty->flip.char_buf_ptr, buf, count);
if (count < 2 ||
- (strncmp ((const char *) buf + count - 2, "^n", 2) &&
- strncmp ((const char *) buf + count - 2, "\0252n", 2))) {
- sclp_tty->flip.char_buf_ptr[count] = '\n';
- count++;
+ (strncmp((const char *) buf + count - 2, "^n", 2) &&
+ strncmp((const char *) buf + count - 2, "\252n", 2))) {
+ /* add the auto \n */
+ tty_insert_flip_string(sclp_tty, buf, count);
+ tty_insert_flip_char(sclp_tty, '\n', TTY_NORMAL);
} else
- count -= 2;
- memset(sclp_tty->flip.flag_buf_ptr, TTY_NORMAL, count);
- sclp_tty->flip.char_buf_ptr += count;
- sclp_tty->flip.flag_buf_ptr += count;
- sclp_tty->flip.count += count;
+ tty_insert_flip_string(sclp_tty, buf, count - 2);
tty_flip_buffer_push(sclp_tty);
break;
}
#include <linux/kernel.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/mm.h>
/* Send input to line discipline */
buffer++;
count--;
- /* Prevent buffer overrun by discarding input. Note that
- * because buffer_push works asynchronously, we cannot wait
- * for the buffer to be emptied. */
- if (count + sclp_vt220_tty->flip.count > TTY_FLIPBUF_SIZE)
- count = TTY_FLIPBUF_SIZE - sclp_vt220_tty->flip.count;
- memcpy(sclp_vt220_tty->flip.char_buf_ptr, buffer, count);
- memset(sclp_vt220_tty->flip.flag_buf_ptr, TTY_NORMAL, count);
- sclp_vt220_tty->flip.char_buf_ptr += count;
- sclp_vt220_tty->flip.flag_buf_ptr += count;
- sclp_vt220_tty->flip.count += count;
+ tty_insert_flip_string(sclp_vt220_tty, buffer, count);
tty_flip_buffer_push(sclp_vt220_tty);
break;
}
#include <linux/config.h>
#include <linux/module.h>
#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/serial_reg.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
static int
ctc_tty_try_read(ctc_tty_info * info, struct sk_buff *skb)
{
- int c;
int len;
struct tty_struct *tty;
DBF_TEXT(trace, 5, __FUNCTION__);
if ((tty = info->tty)) {
if (info->mcr & UART_MCR_RTS) {
- c = TTY_FLIPBUF_SIZE - tty->flip.count;
len = skb->len;
- if (c >= len) {
- memcpy(tty->flip.char_buf_ptr, skb->data, len);
- memset(tty->flip.flag_buf_ptr, 0, len);
- tty->flip.count += len;
- tty->flip.char_buf_ptr += len;
- tty->flip.flag_buf_ptr += len;
- tty_flip_buffer_push(tty);
- kfree_skb(skb);
- return 1;
- }
+ tty_insert_flip_string(tty, skb->data, len);
+ tty_flip_buffer_push(tty);
+ kfree_skb(skb);
+ return 1;
}
}
return 0;
DBF_TEXT(trace, 5, __FUNCTION__);
if ((tty = info->tty)) {
if (info->mcr & UART_MCR_RTS) {
- int c = TTY_FLIPBUF_SIZE - tty->flip.count;
struct sk_buff *skb;
- if ((c > 0) && (skb = skb_dequeue(&info->rx_queue))) {
+ if ((skb = skb_dequeue(&info->rx_queue))) {
int len = skb->len;
- if (len > c)
- len = c;
- memcpy(tty->flip.char_buf_ptr, skb->data, len);
+ tty_insert_flip_string(tty, skb->data, len);
skb_pull(skb, len);
- memset(tty->flip.flag_buf_ptr, 0, len);
- tty->flip.count += len;
- tty->flip.char_buf_ptr += len;
- tty->flip.flag_buf_ptr += len;
tty_flip_buffer_push(tty);
if (skb->len > 0)
skb_queue_head(&info->rx_queue, skb);
status = *CSR_UARTFLG;
while (!(status & 0x10) && max_count--) {
- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
- if (tty->low_latency)
- tty_flip_buffer_push(tty);
- /*
- * If this failed then we will throw away the
- * bytes but must do so to clear interrupts
- */
- }
-
ch = *CSR_UARTDR;
flag = TTY_NORMAL;
port->icount.rx++;
{
struct tty_struct *tty = info->tty;
m68328_uart *uart = &uart_addr[info->line];
- unsigned char ch;
+ unsigned char ch, flag;
/*
* This do { } while() loop will get ALL chars out of Rx FIFO
/*
* Make sure that we do not overflow the buffer
*/
- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
+ if (tty_request_buffer_room(tty, 1) == 0) {
schedule_work(&tty->flip.work);
return;
}
+ flag = TTY_NORMAL;
+
if(rx & URX_PARITY_ERROR) {
- *tty->flip.flag_buf_ptr++ = TTY_PARITY;
+ flag = TTY_PARITY;
status_handle(info, rx);
} else if(rx & URX_OVRUN) {
- *tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
+ flag = TTY_OVERRUN;
status_handle(info, rx);
} else if(rx & URX_FRAME_ERROR) {
- *tty->flip.flag_buf_ptr++ = TTY_FRAME;
+ flag = TTY_FRAME;
status_handle(info, rx);
- } else {
- *tty->flip.flag_buf_ptr++ = 0; /* XXX */
}
- *tty->flip.char_buf_ptr++ = ch;
- tty->flip.count++;
-
+ tty_insert_flip_char(tty, ch, flag);
#ifndef CONFIG_XCOPILOT_BUGS
} while((rx = uart->urx.w) & URX_DATA_READY);
#endif
static _INLINE_ void receive_chars(ser_info_t *info)
{
struct tty_struct *tty = info->tty;
- unsigned char ch, *cp;
+ unsigned char ch, flag, *cp;
/*int ignored = 0;*/
int i;
ushort status;
cp = (char *)bdp->buf;
status = bdp->status;
- /* Check to see if there is room in the tty buffer for
- * the characters in our BD buffer. If not, we exit
- * now, leaving the BD with the characters. We'll pick
- * them up again on the next receive interrupt (which could
- * be a timeout).
- */
- if ((tty->flip.count + i) >= TTY_FLIPBUF_SIZE)
- break;
-
while (i-- > 0) {
ch = *cp++;
- *tty->flip.char_buf_ptr = ch;
icount->rx++;
#ifdef SERIAL_DEBUG_INTR
printk("DR%02x:%02x...", ch, status);
#endif
- *tty->flip.flag_buf_ptr = 0;
+ flag = TTY_NORMAL;
+
if (status & (BD_SC_BR | BD_SC_FR |
BD_SC_PR | BD_SC_OV)) {
/*
if (info->flags & ASYNC_SAK)
do_SAK(tty);
} else if (status & BD_SC_PR)
- *tty->flip.flag_buf_ptr = TTY_PARITY;
+ flag = TTY_PARITY;
else if (status & BD_SC_FR)
- *tty->flip.flag_buf_ptr = TTY_FRAME;
- if (status & BD_SC_OV) {
- /*
- * Overrun is special, since it's
- * reported immediately, and doesn't
- * affect the current character
- */
- if (tty->flip.count < TTY_FLIPBUF_SIZE) {
- tty->flip.count++;
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- *tty->flip.flag_buf_ptr =
- TTY_OVERRUN;
- }
- }
+ flag = TTY_FRAME;
}
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- break;
-
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
+ tty_insert_flip_char(tty, ch, flag);
+ if (status & BD_SC_OV)
+ /*
+ * Overrun is special, since it's
+ * reported immediately, and doesn't
+ * affect the current character
+ */
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
}
/* This BD is ready to be used again. Clear status.
/* Check to see if there is room in the tty buffer for
* the break. If not, we exit now, losing the break. FIXME
*/
- if ((tty->flip.count + 1) >= TTY_FLIPBUF_SIZE)
- return;
- *(tty->flip.flag_buf_ptr++) = TTY_BREAK;
- *(tty->flip.char_buf_ptr++) = 0;
- tty->flip.count++;
-
+ tty_insert_flip_char(tty, 0, TTY_BREAK);
schedule_work(&tty->flip.work);
}
char flag;
do {
- /* The following is not allowed by the tty layer and
- unsafe. It should be fixed ASAP */
- if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
- if (tty->low_latency) {
- spin_unlock(&up->port.lock);
- tty_flip_buffer_push(tty);
- spin_lock(&up->port.lock);
- }
- /*
- * If this failed then we will throw away the
- * bytes but must do so to clear interrupts
- */
- }
ch = serial_inp(up, UART_RX);
flag = TTY_NORMAL;
up->port.icount.rx++;
status = UART_GET_FR(port);
while (UART_RX_DATA(status) && max_count--) {
- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
- if (tty->low_latency)
- tty_flip_buffer_push(tty);
- /*
- * If this failed then we will throw away the
- * bytes but must do so to clear interrupts.
- */
- }
-
ch = UART_GET_CHAR(port);
flag = TTY_NORMAL;
status = readw(uap->port.membase + UART01x_FR);
while ((status & UART01x_FR_RXFE) == 0 && max_count--) {
- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
- if (tty->low_latency)
- tty_flip_buffer_push(tty);
- /*
- * If this failed then we will throw away the
- * bytes but must do so to clear interrupts
- */
- }
-
ch = readw(uap->port.membase + UART01x_DR) | UART_DUMMY_DR_RX;
flag = TTY_NORMAL;
uap->port.icount.rx++;
receive_chars(struct uart_8250_port *up, int *status, struct pt_regs *regs)
{
struct tty_struct *tty = up->port.info->tty;
- unsigned char ch;
+ unsigned char ch, flag;
int max_count = 256;
do {
- if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
- tty->flip.work.func((void *)tty);
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- return; // if TTY_DONT_FLIP is set
- }
ch = serial_inp(up, UART_RX);
- *tty->flip.char_buf_ptr = ch;
- *tty->flip.flag_buf_ptr = TTY_NORMAL;
+ flag = TTY_NORMAL;
up->port.icount.rx++;
if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
#endif
if (*status & UART_LSR_BI) {
DEBUG_INTR("handling break....");
- *tty->flip.flag_buf_ptr = TTY_BREAK;
+ flag = TTY_BREAK;
} else if (*status & UART_LSR_PE)
- *tty->flip.flag_buf_ptr = TTY_PARITY;
+ flag = TTY_PARITY;
else if (*status & UART_LSR_FE)
- *tty->flip.flag_buf_ptr = TTY_FRAME;
+ flag = TTY_FRAME;
}
if (uart_handle_sysrq_char(&up->port, ch, regs))
goto ignore_char;
- if ((*status & up->port.ignore_status_mask) == 0) {
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
- }
- if ((*status & UART_LSR_OE) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
+ if ((*status & up->port.ignore_status_mask) == 0)
+ tty_insert_flip_char(tty, ch, flag);
+ if (*status & UART_LSR_OE)
/*
* Overrun is special, since it's reported
* immediately, and doesn't affect the current
* character.
*/
- *tty->flip.flag_buf_ptr = TTY_OVERRUN;
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
}
ignore_char:
*status = serial_inp(up, UART_LSR);
while (!(status & SYSFLG_URXFE)) {
ch = clps_readl(UARTDR(port));
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- goto ignore_char;
port->icount.rx++;
flg = TTY_NORMAL;
if (!tty)
break;
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- break;
icount->rx++;
unsigned short int status;
struct uart_icount *icount;
unsigned long offset;
+ unsigned char flag;
trace(icom_port, "RCV_COMPLETE", 0);
rcv_buff = icom_port->next_rcv;
status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags);
while (status & SA_FL_RCV_DONE) {
+ int first = -1;
trace(icom_port, "FID_STATUS", status);
count = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].leLength);
+ count = tty_buffer_request_room(tty, count);
trace(icom_port, "RCV_COUNT", count);
- if (count > (TTY_FLIPBUF_SIZE - tty->flip.count))
- count = TTY_FLIPBUF_SIZE - tty->flip.count;
trace(icom_port, "REAL_COUNT", count);
cpu_to_le32(icom_port->statStg->rcv[rcv_buff].leBuffer) -
icom_port->recv_buf_pci;
- memcpy(tty->flip.char_buf_ptr,(unsigned char *)
- ((unsigned long)icom_port->recv_buf + offset), count);
-
+ /* Block copy all but the last byte as this may have status */
if (count > 0) {
- tty->flip.count += count - 1;
- tty->flip.char_buf_ptr += count - 1;
-
- memset(tty->flip.flag_buf_ptr, 0, count);
- tty->flip.flag_buf_ptr += count - 1;
+ first = icom_port->recv_buf[offset];
+ tty_insert_flip_string(tty, icom_port->recv_buf + offset, count - 1);
}
icount = &icom_port->uart_port.icount;
/* Break detect logic */
if ((status & SA_FLAGS_FRAME_ERROR)
- && (tty->flip.char_buf_ptr[0] == 0x00)) {
+ && first == 0) {
status &= ~SA_FLAGS_FRAME_ERROR;
status |= SA_FLAGS_BREAK_DET;
trace(icom_port, "BREAK_DET", 0);
}
+ flag = TTY_NORMAL;
+
if (status &
(SA_FLAGS_BREAK_DET | SA_FLAGS_PARITY_ERROR |
SA_FLAGS_FRAME_ERROR | SA_FLAGS_OVERRUN)) {
status &= icom_port->read_status_mask;
if (status & SA_FLAGS_BREAK_DET) {
- *tty->flip.flag_buf_ptr = TTY_BREAK;
+ flag = TTY_BREAK;
} else if (status & SA_FLAGS_PARITY_ERROR) {
trace(icom_port, "PARITY_ERROR", 0);
- *tty->flip.flag_buf_ptr = TTY_PARITY;
+ flag = TTY_PARITY;
} else if (status & SA_FLAGS_FRAME_ERROR)
- *tty->flip.flag_buf_ptr = TTY_FRAME;
-
- if (status & SA_FLAGS_OVERRUN) {
- /*
- * Overrun is special, since it's
- * reported immediately, and doesn't
- * affect the current character
- */
- if (tty->flip.count < TTY_FLIPBUF_SIZE) {
- tty->flip.count++;
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- *tty->flip.flag_buf_ptr = TTY_OVERRUN;
- }
- }
+ flag = TTY_FRAME;
+
}
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
- ignore_char:
- icom_port->statStg->rcv[rcv_buff].flags = 0;
+ tty_insert_flip_char(tty, *(icom_port->recv_buf + offset + count - 1), flag);
+
+ if (status & SA_FLAGS_OVERRUN)
+ /*
+ * Overrun is special, since it's
+ * reported immediately, and doesn't
+ * affect the current character
+ */
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ignore_char:
+ icom_port->statStg->rcv[rcv_buff].flags = 0;
icom_port->statStg->rcv[rcv_buff].leLength = 0;
icom_port->statStg->rcv[rcv_buff].WorkingLength =
(unsigned short int) cpu_to_le16(RCV_BUFF_SZ);
error_return:
tty_insert_flip_char(tty, rx, flg);
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- goto out;
-
ignore_char:
rx = URXD0((u32)sport->port.membase);
} while(rx & URXD_CHARRDY);
spin_lock_irqsave(&the_port->lock, pflags);
tty = info->tty;
- if (request_count > TTY_FLIPBUF_SIZE - tty->flip.count)
- request_count = TTY_FLIPBUF_SIZE - tty->flip.count;
+ request_count = tty_buffer_request_room(tty, IOC4_MAX_CHARS - 2);
if (request_count > 0) {
icount = &the_port->icount;
read_count = do_read(the_port, ch, request_count);
if (read_count > 0) {
- flip = 1;
- memcpy(tty->flip.char_buf_ptr, ch, read_count);
- memset(tty->flip.flag_buf_ptr, TTY_NORMAL, read_count);
- tty->flip.char_buf_ptr += read_count;
- tty->flip.flag_buf_ptr += read_count;
- tty->flip.count += read_count;
+ tty_insert_flip_string(tty, ch, read_count);
icount->rx += read_count;
}
}
struct tty_struct *tty = up->port.info->tty; /* XXX info==NULL? */
while (1) {
- unsigned char ch, r1;
-
- if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
- tty->flip.work.func((void *)tty);
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- return; /* XXX Ignores SysRq when we need it most. Fix. */
- }
+ unsigned char ch, r1, flag;
r1 = read_zsreg(channel, R1);
if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) {
}
/* A real serial line, record the character and status. */
- *tty->flip.char_buf_ptr = ch;
- *tty->flip.flag_buf_ptr = TTY_NORMAL;
+ flag = TTY_NORMAL;
up->port.icount.rx++;
if (r1 & (BRK_ABRT | PAR_ERR | Rx_OVR | CRC_ERR)) {
if (r1 & BRK_ABRT) {
up->port.icount.overrun++;
r1 &= up->port.read_status_mask;
if (r1 & BRK_ABRT)
- *tty->flip.flag_buf_ptr = TTY_BREAK;
+ flag = TTY_BREAK;
else if (r1 & PAR_ERR)
- *tty->flip.flag_buf_ptr = TTY_PARITY;
+ flag = TTY_PARITY;
else if (r1 & CRC_ERR)
- *tty->flip.flag_buf_ptr = TTY_FRAME;
+ flag = TTY_FRAME;
}
if (uart_handle_sysrq_char(&up->port, ch, regs))
goto next_char;
if (up->port.ignore_status_mask == 0xff ||
- (r1 & up->port.ignore_status_mask) == 0) {
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
- }
- if ((r1 & Rx_OVR) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
- *tty->flip.flag_buf_ptr = TTY_OVERRUN;
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
- }
+ (r1 & up->port.ignore_status_mask) == 0)
+ tty_insert_flip_char(tty, ch, flag);
+
+ if (r1 & Rx_OVR)
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
next_char:
ch = readb(&channel->control);
ZSDELAY();
{
struct tty_struct *tty = up->port.info->tty;
unsigned char ch;
+ unsigned char flag;
int max_count = 256;
do {
- if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
- tty->flip.work.func((void *)tty);
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- return; // if TTY_DONT_FLIP is set
- }
ch = sio_in(up, SIORXB);
- *tty->flip.char_buf_ptr = ch;
- *tty->flip.flag_buf_ptr = TTY_NORMAL;
+ flag = TTY_NORMAL;
up->port.icount.rx++;
if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
if (*status & UART_LSR_BI) {
DEBUG_INTR("handling break....");
- *tty->flip.flag_buf_ptr = TTY_BREAK;
+ flag = TTY_BREAK;
} else if (*status & UART_LSR_PE)
- *tty->flip.flag_buf_ptr = TTY_PARITY;
+ flag = TTY_PARITY;
else if (*status & UART_LSR_FE)
- *tty->flip.flag_buf_ptr = TTY_FRAME;
+ flag = TTY_FRAME;
}
if (uart_handle_sysrq_char(&up->port, ch, regs))
goto ignore_char;
- if ((*status & up->port.ignore_status_mask) == 0) {
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
- }
- if ((*status & UART_LSR_OE) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
+ if ((*status & up->port.ignore_status_mask) == 0)
+ tty_insert_flip_char(tty, ch, flag);
+
+ if (*status & UART_LSR_OE) {
/*
* Overrun is special, since it's reported
* immediately, and doesn't affect the current
* character.
*/
- *tty->flip.flag_buf_ptr = TTY_OVERRUN;
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
}
ignore_char:
*status = serial_in(up, UART_LSR);
{
volatile unsigned char *uartp;
struct tty_struct *tty = info->tty;
- unsigned char status, ch;
+ unsigned char status, ch, flag;
if (!tty)
return;
uartp = info->addr;
while ((status = uartp[MCFUART_USR]) & MCFUART_USR_RXREADY) {
-
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- break;
-
ch = uartp[MCFUART_URB];
info->stats.rx++;
}
#endif
- tty->flip.count++;
+ flag = TTY_NORMAL;
if (status & MCFUART_USR_RXERR) {
uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETERR;
if (status & MCFUART_USR_RXBREAK) {
info->stats.rxbreak++;
- *tty->flip.flag_buf_ptr++ = TTY_BREAK;
+ flag = TTY_BREAK;
} else if (status & MCFUART_USR_RXPARITY) {
info->stats.rxparity++;
- *tty->flip.flag_buf_ptr++ = TTY_PARITY;
+ flag = TTY_PARITY;
} else if (status & MCFUART_USR_RXOVERRUN) {
info->stats.rxoverrun++;
- *tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
+ flag = TTY_OVERRUN;
} else if (status & MCFUART_USR_RXFRAMING) {
info->stats.rxframing++;
- *tty->flip.flag_buf_ptr++ = TTY_FRAME;
- } else {
- /* This should never happen... */
- *tty->flip.flag_buf_ptr++ = 0;
+ flag = TTY_FRAME;
}
- } else {
- *tty->flip.flag_buf_ptr++ = 0;
}
- *tty->flip.char_buf_ptr++ = ch;
+ tty_insert_flip_char(tty, ch, flag);
}
schedule_work(&tty->flip.work);
mpc52xx_uart_int_rx_chars(struct uart_port *port, struct pt_regs *regs)
{
struct tty_struct *tty = port->info->tty;
- unsigned char ch;
+ unsigned char ch, flag;
unsigned short status;
/* While we can read, do so ! */
while ( (status = in_be16(&PSC(port)->mpc52xx_psc_status)) &
MPC52xx_PSC_SR_RXRDY) {
- /* If we are full, just stop reading */
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- break;
-
/* Get the char */
ch = in_8(&PSC(port)->mpc52xx_psc_buffer_8);
#endif
/* Store it */
- *tty->flip.char_buf_ptr = ch;
- *tty->flip.flag_buf_ptr = 0;
+
+ flag = TTY_NORMAL;
port->icount.rx++;
if ( status & (MPC52xx_PSC_SR_PE |
MPC52xx_PSC_SR_FE |
- MPC52xx_PSC_SR_RB |
- MPC52xx_PSC_SR_OE) ) {
+ MPC52xx_PSC_SR_RB) ) {
if (status & MPC52xx_PSC_SR_RB) {
- *tty->flip.flag_buf_ptr = TTY_BREAK;
+ flag = TTY_BREAK;
uart_handle_break(port);
} else if (status & MPC52xx_PSC_SR_PE)
- *tty->flip.flag_buf_ptr = TTY_PARITY;
+ flag = TTY_PARITY;
else if (status & MPC52xx_PSC_SR_FE)
- *tty->flip.flag_buf_ptr = TTY_FRAME;
- if (status & MPC52xx_PSC_SR_OE) {
- /*
- * Overrun is special, since it's
- * reported immediately, and doesn't
- * affect the current character
- */
- if (tty->flip.count < (TTY_FLIPBUF_SIZE-1)) {
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
- }
- *tty->flip.flag_buf_ptr = TTY_OVERRUN;
- }
+ flag = TTY_FRAME;
/* Clear error condition */
out_8(&PSC(port)->command,MPC52xx_PSC_RST_ERR_STAT);
}
-
- tty->flip.char_buf_ptr++;
- tty->flip.flag_buf_ptr++;
- tty->flip.count++;
-
+ tty_insert_flip_char(tty, ch, flag);
+ if (status & MPC52xx_PSC_SR_OE) {
+ /*
+ * Overrun is special, since it's
+ * reported immediately, and doesn't
+ * affect the current character
+ */
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
}
tty_flip_buffer_push(tty);
bytes_in = be16_to_cpu(rxre->bytecnt);
/* Following use of tty struct directly is deprecated */
- if (unlikely((tty->flip.count + bytes_in) >= TTY_FLIPBUF_SIZE)){
+ if (unlikely(tty_buffer_request_room(tty, bytes_in) < bytes_in)) {
if (tty->low_latency)
tty_flip_buffer_push(tty);
/*
- * If this failed then we will throw awa the bytes
- * but mst do so to clear interrupts.
+ * If this failed then we will throw away the bytes
+ * but must do so to clear interrupts.
*/
}
if (MUX_EOFIFO(data))
break;
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- continue;
-
- *tty->flip.char_buf_ptr = data & 0xffu;
- *tty->flip.flag_buf_ptr = TTY_NORMAL;
port->icount.rx++;
if (MUX_BREAK(data)) {
if (uart_handle_sysrq_char(port, data & 0xffu, NULL))
continue;
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
+ tty_insert_flip_char(tty, data & 0xFF, TTY_NORMAL);
}
if (start_count != port->icount.rx) {
struct pt_regs *regs)
{
struct tty_struct *tty = NULL;
- unsigned char ch, r1, drop, error;
+ unsigned char ch, r1, drop, error, flag;
int loops = 0;
- retry:
/* The interrupt can be enabled when the port isn't open, typically
* that happens when using one port is open and the other closed (stale
* interrupt) or when one port is used as a console.
error = 0;
drop = 0;
- if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
- /* Have to drop the lock here */
- pmz_debug("pmz: flip overflow\n");
- spin_unlock(&uap->port.lock);
- tty->flip.work.func((void *)tty);
- spin_lock(&uap->port.lock);
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- drop = 1;
- if (ZS_IS_ASLEEP(uap))
- return NULL;
- if (!ZS_IS_OPEN(uap))
- goto retry;
- }
-
r1 = read_zsreg(uap, R1);
ch = read_zsdata(uap);
if (drop)
goto next_char;
- *tty->flip.char_buf_ptr = ch;
- *tty->flip.flag_buf_ptr = TTY_NORMAL;
+ flag = TTY_NORMAL;
uap->port.icount.rx++;
if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR | BRK_ABRT)) {
uap->port.icount.overrun++;
r1 &= uap->port.read_status_mask;
if (r1 & BRK_ABRT)
- *tty->flip.flag_buf_ptr = TTY_BREAK;
+ flag = TTY_BREAK;
else if (r1 & PAR_ERR)
- *tty->flip.flag_buf_ptr = TTY_PARITY;
+ flag = TTY_PARITY;
else if (r1 & CRC_ERR)
- *tty->flip.flag_buf_ptr = TTY_FRAME;
+ flag = TTY_FRAME;
}
if (uap->port.ignore_status_mask == 0xff ||
(r1 & uap->port.ignore_status_mask) == 0) {
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
- }
- if ((r1 & Rx_OVR) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
- *tty->flip.flag_buf_ptr = TTY_OVERRUN;
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
+ tty_insert_flip_char(tty, ch, flag);
}
+ if (r1 & Rx_OVR)
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
next_char:
/* We can get stuck in an infinite loop getting char 0 when the
* line is in a wrong HW state, we break that here.
int max_count = 256;
do {
- if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
- if (tty->low_latency)
- tty_flip_buffer_push(tty);
- /*
- * If this failed then we will throw away the
- * bytes but must do so to clear interrupts
- */
- }
ch = serial_in(up, UART_RX);
flag = TTY_NORMAL;
up->port.icount.rx++;
if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0)
break;
- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
- if (tty->low_latency)
- tty_flip_buffer_push(tty);
-
- /*
- * If this failed then we will throw away the
- * bytes but must do so to clear interrupts
- */
- }
-
uerstat = rd_regl(port, S3C2410_UERSTAT);
ch = rd_regb(port, S3C2410_URXH);
while (status & UTSR1_TO_SM(UTSR1_RNE)) {
ch = UART_GET_CHAR(sport);
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- goto ignore_char;
sport->port.icount.rx++;
flg = TTY_NORMAL;
unsigned int data, flag;/* Received data and status */
while (!(UR (port, UART_R_STATUS) & nRxRdy) && --cbRxMax) {
- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
- if (tty->low_latency)
- tty_flip_buffer_push(tty);
- /*
- * If this failed then we will throw away the
- * bytes but must do so to clear interrupts
- */
- }
-
data = UR (port, UART_R_DATA);
flag = TTY_NORMAL;
++port->icount.rx;
char flag;
do {
- /* The following is not allowed by the tty layer and
- unsafe. It should be fixed ASAP */
- if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
- if (tty->low_latency) {
- spin_unlock(&up->port.lock);
- tty_flip_buffer_push(tty);
- spin_lock(&up->port.lock);
- }
- /* If this failed then we will throw away the
- bytes but must do so to clear interrupts */
- }
ch = sio_in(up, TXX9_SIRFIFO);
flag = TTY_NORMAL;
up->port.icount.rx++;
struct tty_struct *tty = port->info->tty;
int i, count, copied = 0;
unsigned short status;
+ unsigned char flag;
status = sci_in(port, SCxSR);
if (!(status & SCxSR_RDxF(port)))
#endif
/* Don't copy more bytes than there is room for in the buffer */
- if (tty->flip.count + count > TTY_FLIPBUF_SIZE)
- count = TTY_FLIPBUF_SIZE - tty->flip.count;
+ count = tty_buffer_request_room(tty, count);
/* If for any reason we can't copy more data, we're done! */
if (count == 0)
|| uart_handle_sysrq_char(port, c, regs)) {
count = 0;
} else {
- tty->flip.char_buf_ptr[0] = c;
- tty->flip.flag_buf_ptr[0] = TTY_NORMAL;
+ tty_insert_flip_char(tty, c, TTY_NORMAL);
}
} else {
for (i=0; i<count; i++) {
}
/* Store data and status */
- tty->flip.char_buf_ptr[i] = c;
if (status&SCxSR_FER(port)) {
- tty->flip.flag_buf_ptr[i] = TTY_FRAME;
+ flag = TTY_FRAME;
pr_debug("sci: frame error\n");
} else if (status&SCxSR_PER(port)) {
- tty->flip.flag_buf_ptr[i] = TTY_PARITY;
+ flag = TTY_PARITY;
pr_debug("sci: parity error\n");
- } else {
- tty->flip.flag_buf_ptr[i] = TTY_NORMAL;
- }
+ } else
+ flag = TTY_NORMAL;
+ tty_insert_flip_char(tty, c, flag);
}
}
sci_in(port, SCxSR); /* dummy read */
sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
- /* Update the kernel buffer end */
- tty->flip.count += count;
- tty->flip.char_buf_ptr += count;
- tty->flip.flag_buf_ptr += count;
copied += count;
port->icount.rx += count;
}
unsigned short status = sci_in(port, SCxSR);
struct tty_struct *tty = port->info->tty;
- if (status&SCxSR_ORER(port) && tty->flip.count<TTY_FLIPBUF_SIZE) {
+ if (status&SCxSR_ORER(port)) {
/* overrun error */
- copied++;
- *tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
+ if(tty_insert_flip_char(tty, 0, TTY_OVERRUN))
+ copied++;
pr_debug("sci: overrun error\n");
}
- if (status&SCxSR_FER(port) && tty->flip.count<TTY_FLIPBUF_SIZE) {
+ if (status&SCxSR_FER(port)) {
if (sci_rxd_in(port) == 0) {
/* Notify of BREAK */
struct sci_port * sci_port = (struct sci_port *)port;
- if(!sci_port->break_flag) {
- sci_port->break_flag = 1;
- sci_schedule_break_timer((struct sci_port *)port);
+ if(!sci_port->break_flag) {
+ sci_port->break_flag = 1;
+ sci_schedule_break_timer((struct sci_port *)port);
/* Do sysrq handling. */
- if(uart_handle_break(port)) {
+ if(uart_handle_break(port))
return 0;
- }
pr_debug("sci: BREAK detected\n");
- copied++;
- *tty->flip.flag_buf_ptr++ = TTY_BREAK;
+ if(tty_insert_flip_char(tty, 0, TTY_BREAK))
+ copied++;
}
}
else {
/* frame error */
- copied++;
- *tty->flip.flag_buf_ptr++ = TTY_FRAME;
+ if(tty_insert_flip_char(tty, 0, TTY_FRAME))
+ copied++;
pr_debug("sci: frame error\n");
}
}
- if (status&SCxSR_PER(port) && tty->flip.count<TTY_FLIPBUF_SIZE) {
+ if (status&SCxSR_PER(port)) {
+ if(tty_insert_flip_char(tty, 0, TTY_PARITY))
+ copied++;
/* parity error */
- copied++;
- *tty->flip.flag_buf_ptr++ = TTY_PARITY;
pr_debug("sci: parity error\n");
}
- if (copied) {
- tty->flip.count += copied;
+ if (copied)
tty_flip_buffer_push(tty);
- }
return copied;
}
struct tty_struct *tty = port->info->tty;
struct sci_port *s = &sci_ports[port->line];
- if (!s->break_flag && status & SCxSR_BRK(port) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
+ if (!s->break_flag && status & SCxSR_BRK(port))
#if defined(CONFIG_CPU_SH3)
/* Debounce break */
s->break_flag = 1;
#endif
/* Notify of BREAK */
- copied++;
- *tty->flip.flag_buf_ptr++ = TTY_BREAK;
+ if(tty_insert_flip_char(tty, 0, TTY_BREAK))
+ copied++;
pr_debug("sci: BREAK detected\n");
}
/* XXX: Handle SCIF overrun error */
if (port->type == PORT_SCIF && (sci_in(port, SCLSR) & SCIF_ORER) != 0) {
sci_out(port, SCLSR, 0);
- if(tty->flip.count<TTY_FLIPBUF_SIZE) {
+ if(tty_insert_flip_char(tty, 0, TTY_OVERRUN)) {
copied++;
- *tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
pr_debug("sci: overrun error\n");
}
}
#endif
- if (copied) {
- tty->flip.count += copied;
+ if (copied)
tty_flip_buffer_push(tty);
- }
-
return copied;
}
struct tty_struct *tty = port->info->tty;
sci_out(port, SCLSR, 0);
- if(tty->flip.count<TTY_FLIPBUF_SIZE) {
- *tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
- tty->flip.count++;
- tty_flip_buffer_push(tty);
- pr_debug("scif: overrun error\n");
- }
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ tty_flip_buffer_push(tty);
+ pr_debug("scif: overrun error\n");
}
#endif
sci_rx_interrupt(irq, ptr, regs);
/* record the character to pass up to the tty layer */
if (tty) {
- *tty->flip.char_buf_ptr = ch;
- *tty->flip.flag_buf_ptr = TTY_NORMAL;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
- if (tty->flip.count == TTY_FLIPBUF_SIZE)
+ if(tty_insert_flip_char(tty, ch, TTY_NORMAL) == 0)
break;
}
port->sc_port.icount.rx++;
saw_console_brk = 1;
for (i = 0; i < count; i++) {
- unsigned char ch = buf[i];
+ unsigned char ch = buf[i], flag;
if (tty == NULL) {
uart_handle_sysrq_char(&up->port, ch, regs);
continue;
}
- if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
- tty->flip.work.func((void *)tty);
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- return tty; // if TTY_DONT_FLIP is set
- }
-
- *tty->flip.char_buf_ptr = ch;
- *tty->flip.flag_buf_ptr = TTY_NORMAL;
+ flag = TTY_NORMAL;
up->port.icount.rx++;
if (unlikely(stat->sreg.isr0 & (SAB82532_ISR0_PERR |
stat->sreg.isr1 &= ((up->port.read_status_mask >> 8) & 0xff);
if (stat->sreg.isr1 & SAB82532_ISR1_BRK) {
- *tty->flip.flag_buf_ptr = TTY_BREAK;
+ flag = TTY_BREAK;
} else if (stat->sreg.isr0 & SAB82532_ISR0_PERR)
- *tty->flip.flag_buf_ptr = TTY_PARITY;
+ flag = TTY_PARITY;
else if (stat->sreg.isr0 & SAB82532_ISR0_FERR)
- *tty->flip.flag_buf_ptr = TTY_FRAME;
+ flag = TTY_FRAME;
}
if (uart_handle_sysrq_char(&up->port, ch, regs))
continue;
if ((stat->sreg.isr0 & (up->port.ignore_status_mask & 0xff)) == 0 &&
- (stat->sreg.isr1 & ((up->port.ignore_status_mask >> 8) & 0xff)) == 0){
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
- }
- if ((stat->sreg.isr0 & SAB82532_ISR0_RFO) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character.
- */
- *tty->flip.flag_buf_ptr = TTY_OVERRUN;
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
- }
+ (stat->sreg.isr1 & ((up->port.ignore_status_mask >> 8) & 0xff)) == 0)
+ tty_insert_flip_char(tty, ch, flag);
+ if (stat->sreg.isr0 & SAB82532_ISR0_RFO)
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
}
if (saw_console_brk)
receive_chars(struct uart_sunsu_port *up, unsigned char *status, struct pt_regs *regs)
{
struct tty_struct *tty = up->port.info->tty;
- unsigned char ch;
+ unsigned char ch, flag;
int max_count = 256;
int saw_console_brk = 0;
do {
- if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
- tty->flip.work.func((void *)tty);
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- return tty; // if TTY_DONT_FLIP is set
- }
ch = serial_inp(up, UART_RX);
- *tty->flip.char_buf_ptr = ch;
- *tty->flip.flag_buf_ptr = TTY_NORMAL;
+ flag = TTY_NORMAL;
up->port.icount.rx++;
if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
}
if (*status & UART_LSR_BI) {
- *tty->flip.flag_buf_ptr = TTY_BREAK;
+ flag = TTY_BREAK;
} else if (*status & UART_LSR_PE)
- *tty->flip.flag_buf_ptr = TTY_PARITY;
+ flag = TTY_PARITY;
else if (*status & UART_LSR_FE)
- *tty->flip.flag_buf_ptr = TTY_FRAME;
+ flag = TTY_FRAME;
}
if (uart_handle_sysrq_char(&up->port, ch, regs))
goto ignore_char;
- if ((*status & up->port.ignore_status_mask) == 0) {
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
- }
- if ((*status & UART_LSR_OE) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
+ if ((*status & up->port.ignore_status_mask) == 0)
+ tty_insert_flip_char(tty, ch, flag);
+ if (*status & UART_LSR_OE)
/*
* Overrun is special, since it's reported
* immediately, and doesn't affect the current
* character.
*/
- *tty->flip.flag_buf_ptr = TTY_OVERRUN;
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
- }
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
ignore_char:
*status = serial_inp(up, UART_LSR);
} while ((*status & UART_LSR_DR) && (max_count-- > 0));
struct pt_regs *regs)
{
struct tty_struct *tty;
- unsigned char ch, r1;
+ unsigned char ch, r1, flag;
tty = NULL;
if (up->port.info != NULL && /* Unopened serial console */
continue;
}
- if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
- tty->flip.work.func((void *)tty);
- /*
- * The 8250 bails out of the loop here,
- * but we need to read everything, or die.
- */
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- continue;
- }
-
/* A real serial line, record the character and status. */
- *tty->flip.char_buf_ptr = ch;
- *tty->flip.flag_buf_ptr = TTY_NORMAL;
+ flag = TTY_NORMAL;
up->port.icount.rx++;
if (r1 & (BRK_ABRT | PAR_ERR | Rx_OVR | CRC_ERR)) {
if (r1 & BRK_ABRT) {
up->port.icount.overrun++;
r1 &= up->port.read_status_mask;
if (r1 & BRK_ABRT)
- *tty->flip.flag_buf_ptr = TTY_BREAK;
+ flag = TTY_BREAK;
else if (r1 & PAR_ERR)
- *tty->flip.flag_buf_ptr = TTY_PARITY;
+ flag = TTY_PARITY;
else if (r1 & CRC_ERR)
- *tty->flip.flag_buf_ptr = TTY_FRAME;
+ flag = TTY_FRAME;
}
if (uart_handle_sysrq_char(&up->port, ch, regs))
continue;
if (up->port.ignore_status_mask == 0xff ||
(r1 & up->port.ignore_status_mask) == 0) {
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
- }
- if ((r1 & Rx_OVR) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
- *tty->flip.flag_buf_ptr = TTY_OVERRUN;
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
+ tty_insert_flip_char(tty, ch, flag);
}
+ if (r1 & Rx_OVR)
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
}
return tty;
lsr = *status;
do {
- if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
- if (tty->low_latency)
- tty_flip_buffer_push(tty);
- }
-
ch = siu_read(port, UART_RX);
port->icount.rx++;
flag = TTY_NORMAL;
dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d\n", buf, buf->size);
- for (i = 0; i < buf->size && !acm->throttle; i++) {
- /* if we insert more than TTY_FLIPBUF_SIZE characters,
- we drop them. */
- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
- tty_flip_buffer_push(tty);
- }
- tty_insert_flip_char(tty, buf->base[i], 0);
- }
+ tty_buffer_request_room(tty, buf->size);
+ if (!acm->throttle)
+ tty_insert_flip_string(tty, buf->base, buf->size);
tty_flip_buffer_push(tty);
spin_lock(&acm->throttle_lock);
unsigned int len;
struct gs_port *port;
int ret;
+ struct tty_struct *tty;
/* TEMPORARY -- only port 0 is supported right now */
port = dev->dev_port[0];
goto exit;
}
- if (port->port_tty == NULL) {
+
+ tty = port->port_tty;
+
+ if (tty == NULL) {
printk(KERN_ERR "gs_recv_packet: port=%d, NULL tty pointer\n",
port->port_num);
ret = -EIO;
goto exit;
}
- len = (unsigned int)(TTY_FLIPBUF_SIZE - port->port_tty->flip.count);
- if (len < size)
- size = len;
-
- if (size > 0) {
- memcpy(port->port_tty->flip.char_buf_ptr, packet, size);
- port->port_tty->flip.char_buf_ptr += size;
- port->port_tty->flip.count += size;
+ len = tty_buffer_request_room(tty, size);
+ if (len > 0) {
+ tty_insert_flip_string(tty, packet, len);
tty_flip_buffer_push(port->port_tty);
wake_up_interruptible(&port->port_tty->read_wait);
}
-
ret = 0;
-
exit:
spin_unlock(&port->port_lock);
return ret;
config USB_SERIAL_WHITEHEAT
tristate "USB ConnectTech WhiteHEAT Serial Driver"
- depends on USB_SERIAL && BROKEN_ON_SMP
+ depends on USB_SERIAL
help
Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
USB to serial converter device.
struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
short todo;
- int i;
int result;
dbg("%s - port %d", __FUNCTION__, port->number);
return;
}
if (urb->actual_length) {
- for (i = 0; i < urb->actual_length ; ++i) {
- /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
- if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
- tty_flip_buffer_push(tty);
- }
- /* this doesn't actually push the data through unless tty->low_latency is set */
- tty_insert_flip_char(tty, data[i], 0);
- }
+ tty_buffer_request_room(tty, urb->actual_length);
+ tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
/* process read if there is data other than line status */
if (tty && (bytes > i)) {
+ bytes = tty_buffer_request_room(tty, bytes);
for (; i < bytes ; ++i) {
dbg("pushing byte number %d - %d - %c", i, data[i],
data[i]);
- if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
- tty_flip_buffer_push(tty);
- }
tty_insert_flip_char(tty, data[i], tty_flag);
}
tty_flip_buffer_push(port->tty);
spin_lock_irqsave( &priv->dp_port_lock, flags );
/* send any buffered chars from throttle time on to tty subsystem */
- len = min(priv->dp_in_buf_len, TTY_FLIPBUF_SIZE - tty->flip.count );
+
+ len = tty_buffer_request_room(tty, priv->dp_in_buf_len);
if( len > 0 ) {
- memcpy( tty->flip.char_buf_ptr, priv->dp_in_buf, len );
- memcpy( tty->flip.flag_buf_ptr, priv->dp_in_flag_buf, len );
- tty->flip.char_buf_ptr += len;
- tty->flip.flag_buf_ptr += len;
- tty->flip.count += len;
+ tty_insert_flip_string_flags(tty, priv->dp_in_buf, priv->dp_in_flag_buf, len);
tty_flip_buffer_push( tty );
}
int status = ((unsigned char *)urb->transfer_buffer)[2];
unsigned char *data = ((unsigned char *)urb->transfer_buffer)+3;
int flag,throttled;
+ int i;
/* do not process callbacks on closed ports */
/* but do continue the read chain */
}
} else {
-
- len = min( len, TTY_FLIPBUF_SIZE - tty->flip.count );
-
+ len = tty_buffer_request_room(tty, len);
if( len > 0 ) {
- memcpy( tty->flip.char_buf_ptr, data, len );
- memset( tty->flip.flag_buf_ptr, flag, len );
- tty->flip.char_buf_ptr += len;
- tty->flip.flag_buf_ptr += len;
- tty->flip.count += len;
+ /* Hot path */
+ if(flag == TTY_NORMAL)
+ tty_insert_flip_string(tty, data, len);
+ else {
+ for(i = 0; i < len; i++)
+ tty_insert_flip_char(tty, data[i], flag);
+ }
tty_flip_buffer_push( tty );
}
-
}
-
}
spin_unlock( &priv->dp_port_lock );
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
- int i;
int result;
dbg("%s - port %d", __FUNCTION__, port->number);
tty = port->tty;
if (urb->actual_length) {
- for (i = 0; i < urb->actual_length ; ++i) {
- /* gb - 2000/11/13
- * If we insert too many characters we'll overflow the buffer.
- * This means we'll lose bytes - Decidedly bad.
- */
- if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
- tty_flip_buffer_push(tty);
- }
- tty_insert_flip_char(tty, data[i], 0);
- }
- /* gb - 2000/11/13
- * Goes straight through instead of scheduling - if tty->low_latency is set.
- */
+ tty_buffer_request_room(tty, urb->actual_length);
+ tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
bytes_in += urb->actual_length;
}
length = 0;
}
- /* have to make sure we don't overflow the buffer
- with tty_insert_flip_char's */
- if (tty->flip.count+length > TTY_FLIPBUF_SIZE) {
- tty_flip_buffer_push(tty);
- need_flip = 0;
-
- if (tty->flip.count != 0) {
- /* flip didn't work, this happens when ftdi_process_read() is
- * called from ftdi_unthrottle, because TTY_DONT_FLIP is set */
- dbg("%s - flip buffer push failed", __FUNCTION__);
- break;
- }
- }
if (priv->rx_flags & THROTTLED) {
dbg("%s - throttled", __FUNCTION__);
break;
}
- if (tty->ldisc.receive_room(tty)-tty->flip.count < length) {
+ if (tty_buffer_request_room(tty, length) < length) {
/* break out & wait for throttling/unthrottling to happen */
dbg("%s - receive room low", __FUNCTION__);
break;
char *data, unsigned int actual_length)
{
struct tty_struct *tty = port->tty;
- int i;
if (tty && actual_length) {
usb_serial_debug_data(debug, &port->dev,
__FUNCTION__, actual_length, data);
- for (i = 0; i < actual_length ; ++i) {
- /* if we insert more than TTY_FLIPBUF_SIZE characters,
- we drop them. */
- if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
- tty_flip_buffer_push(tty);
- }
- /* this doesn't actually push the data through unless
- tty->low_latency is set */
- tty_insert_flip_char(tty, data[i], 0);
- }
+ tty_buffer_request_room(tty, actual_length);
+ tty_insert_flip_string(tty, data, actual_length);
tty_flip_buffer_push(tty);
}
}
struct usb_serial *serial = port->serial;
struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
- int i;
int result;
dbg("%s - port %d", __FUNCTION__, port->number);
tty = port->tty;
if (tty && urb->actual_length) {
- for (i = 0; i < urb->actual_length ; ++i) {
- /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
- if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
- tty_flip_buffer_push(tty);
- }
- /* this doesn't actually push the data through unless tty->low_latency is set */
- tty_insert_flip_char(tty, data[i], 0);
- }
+ tty_buffer_request_room(tty, urb->actual_length);
+ tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
int cnt;
do {
- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
- tty_flip_buffer_push(tty);
- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
- dev_err(dev, "%s - dropping data, %d bytes lost\n",
- __FUNCTION__, length);
- return;
- }
+ cnt = tty_buffer_request_room(tty, length);
+ if (cnt < length) {
+ dev_err(dev, "%s - dropping data, %d bytes lost\n",
+ __FUNCTION__, length - cnt);
+ if(cnt == 0)
+ break;
}
- cnt = min(length, TTY_FLIPBUF_SIZE - tty->flip.count);
- memcpy(tty->flip.char_buf_ptr, data, cnt);
- memset(tty->flip.flag_buf_ptr, 0, cnt);
- tty->flip.char_buf_ptr += cnt;
- tty->flip.flag_buf_ptr += cnt;
- tty->flip.count += cnt;
+ tty_insert_flip_string(tty, data, cnt);
data += cnt;
length -= cnt;
} while (length > 0);
int cnt;
do {
- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
- tty_flip_buffer_push(tty);
- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
- dev_err(dev, "%s - dropping data, %d bytes lost\n",
- __FUNCTION__, length);
- return;
- }
+ cnt = tty_buffer_request_room(tty, length);
+ if (cnt < length) {
+ dev_err(dev, "%s - dropping data, %d bytes lost\n",
+ __FUNCTION__, length - cnt);
+ if(cnt == 0)
+ break;
}
- cnt = min(length, TTY_FLIPBUF_SIZE - tty->flip.count);
- memcpy(tty->flip.char_buf_ptr, data, cnt);
- memset(tty->flip.flag_buf_ptr, 0, cnt);
- tty->flip.char_buf_ptr += cnt;
- tty->flip.flag_buf_ptr += cnt;
- tty->flip.count += cnt;
+ tty_insert_flip_string(tty, data, cnt);
data += cnt;
length -= cnt;
} while (length > 0);
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
- int i, result;
+ int result;
dbg("%s - port %d", __FUNCTION__, port->number);
tty = port->tty;
if (tty && urb->actual_length) {
- for (i = 0; i < urb->actual_length ; ++i) {
- /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
- if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
- tty_flip_buffer_push(tty);
- }
- /* this doesn't actually push the data through unless tty->low_latency is set */
- tty_insert_flip_char(tty, data[i], 0);
- }
+ tty_buffer_request_room(tty, urb->actual_length);
+ tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
bytes_in += urb->actual_length;
}
struct usb_serial_port *port = urb->context;
unsigned char *data = urb->transfer_buffer;
struct tty_struct *tty;
- int i;
int result;
dbg("%s - port %d", __FUNCTION__, port->number);
tty = port->tty;
if (tty && urb->actual_length) {
- for (i = 0; i < urb->actual_length ; ++i) {
- /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
- if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
- tty_flip_buffer_push(tty);
- }
- /* this doesn't actually push the data through unless tty->low_latency is set */
- tty_insert_flip_char(tty, data[i], 0);
- }
+ tty_buffer_request_room(tty, urb->actual_length);
+ tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
urb->actual_length, data);
} else {
- int i;
int bytes_sent = ((__u8 *) data)[0] +
((unsigned int) ((__u8 *) data)[1] << 8);
tty = port->tty;
bytes_sent = urb->actual_length - 2;
}
- for (i = 2; i < 2+bytes_sent; i++) {
- /* if we insert more than TTY_FLIPBUF_SIZE characters,
- * we drop them. */
- if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
- tty_flip_buffer_push(tty);
- }
- /* this doesn't actually push the data through unless
- * tty->low_latency is set */
- tty_insert_flip_char(tty, ((__u8*) data)[i], 0);
- }
+ tty_buffer_request_room(tty, bytes_sent);
+ tty_insert_flip_string(tty, data + 2, bytes_sent);
tty_flip_buffer_push(tty);
/* again lockless, but debug info only */
static void kobil_read_int_callback( struct urb *purb, struct pt_regs *regs)
{
- int i;
int result;
struct usb_serial_port *port = (struct usb_serial_port *) purb->context;
struct tty_struct *tty;
*/
// END DEBUG
- for (i = 0; i < purb->actual_length; ++i) {
- // if we insert more than TTY_FLIPBUF_SIZE characters, we drop them.
- if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
- tty_flip_buffer_push(tty);
- }
- // this doesn't actually push the data through unless tty->low_latency is set
- tty_insert_flip_char(tty, data[i], 0);
- }
+ tty_buffer_request_room(tty, purb->actual_length);
+ tty_insert_flip_string(tty, data, purb->actual_length);
tty_flip_buffer_push(tty);
}
static void option_indat_callback(struct urb *urb, struct pt_regs *regs)
{
- int i, err;
+ int err;
int endpoint;
struct usb_serial_port *port;
struct tty_struct *tty;
} else {
tty = port->tty;
if (urb->actual_length) {
- for (i = 0; i < urb->actual_length ; ++i) {
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- tty_flip_buffer_push(tty);
- tty_insert_flip_char(tty, data[i], 0);
- }
+ tty_buffer_request_room(tty, urb->actual_length);
+ tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
} else {
dbg("%s: empty read urb received", __FUNCTION__);
tty = port->tty;
if (tty && urb->actual_length) {
+ tty_buffer_request_room(tty, urb->actual_length + 1);
/* overrun is special, not associated with a char */
if (status & UART_OVERRUN_ERROR)
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-
- for (i = 0; i < urb->actual_length; ++i) {
- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
- tty_flip_buffer_push(tty);
- }
+ for (i = 0; i < urb->actual_length; ++i)
tty_insert_flip_char (tty, data[i], tty_flag);
- }
tty_flip_buffer_push (tty);
}
int cnt;
do {
- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
- tty_flip_buffer_push(tty);
- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
- dev_err(dev, "%s - dropping data, %d bytes lost\n", __FUNCTION__, length);
- return;
- }
+ cnt = tty_buffer_request_room(tty, length);
+ if (cnt < length) {
+ dev_err(dev, "%s - dropping data, %d bytes lost\n", __FUNCTION__, length - cnt);
+ if(cnt == 0)
+ break;
}
- cnt = min(length, TTY_FLIPBUF_SIZE - tty->flip.count);
- memcpy(tty->flip.char_buf_ptr, data, cnt);
- memset(tty->flip.flag_buf_ptr, 0, cnt);
- tty->flip.char_buf_ptr += cnt;
- tty->flip.flag_buf_ptr += cnt;
- tty->flip.count += cnt;
+ tty_insert_flip_string(tty, data, cnt);
+ tty_flip_buffer_push(tty);
data += cnt;
length -= cnt;
} while (length > 0);
- tty_flip_buffer_push(tty);
}
unsigned char *data = urb->transfer_buffer;
struct tty_struct *tty;
unsigned long flags;
- int i;
int throttled;
int result;
tty = port->tty;
if (tty && urb->actual_length) {
- for (i = 0; i < urb->actual_length ; ++i) {
- /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
- if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
- tty_flip_buffer_push(tty);
- }
- /* this doesn't actually push the data through unless tty->low_latency is set */
- tty_insert_flip_char(tty, data[i], 0);
- }
+ tty_buffer_request_room(tty, urb->actual_length);
+ tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
spin_lock_irqsave(&priv->lock, flags);
urb = wrap->urb;
if (tty && urb->actual_length) {
- if (urb->actual_length > TTY_FLIPBUF_SIZE - tty->flip.count) {
+ int len = tty_buffer_request_room(tty, urb->actual_length);
+ /* This stuff can go away now I suspect */
+ if (unlikely(len < urb->actual_length)) {
spin_lock_irqsave(&info->lock, flags);
list_add(tmp, &info->rx_urb_q);
spin_unlock_irqrestore(&info->lock, flags);
schedule_work(&info->rx_work);
return;
}
-
- memcpy(tty->flip.char_buf_ptr, urb->transfer_buffer, urb->actual_length);
- tty->flip.char_buf_ptr += urb->actual_length;
- tty->flip.count += urb->actual_length;
- sent += urb->actual_length;
+ tty_insert_flip_string(tty, urb->transfer_buffer, len);
+ sent += len;
}
urb->dev = port->serial->dev;
static inline void con_schedule_flip(struct tty_struct *t)
{
- schedule_work(&t->flip.work);
+ schedule_work(&t->buf.work);
}
#endif
*/
#define TTY_FLIPBUF_SIZE 512
-struct tty_flip_buffer {
+struct tty_buffer {
+ struct tty_buffer *next;
+ char *char_buf_ptr;
+ unsigned char *flag_buf_ptr;
+ int used;
+ int size;
+ /* Data points here */
+ unsigned long data[0];
+};
+
+struct tty_bufhead {
struct work_struct work;
struct semaphore pty_sem;
- char *char_buf_ptr;
- unsigned char *flag_buf_ptr;
- int count;
- int buf_num;
- unsigned char char_buf[2*TTY_FLIPBUF_SIZE];
- char flag_buf[2*TTY_FLIPBUF_SIZE];
- unsigned char slop[4]; /* N.B. bug overwrites buffer by 1 */
+ struct tty_buffer *head; /* Queue head */
+ struct tty_buffer *tail; /* Active buffer */
+ struct tty_buffer *free; /* Free queue head */
};
/*
* The pty uses char_buf and flag_buf as a contiguous buffer
unsigned char stopped:1, hw_stopped:1, flow_stopped:1, packet:1;
unsigned char low_latency:1, warned:1;
unsigned char ctrl_status;
+ unsigned int receive_room; /* Bytes free for queue */
struct tty_struct *link;
struct fasync_struct *fasync;
- struct tty_flip_buffer flip;
+ struct tty_bufhead buf;
int max_flip_cnt;
int alt_speed; /* For magic substitution of 38400 bps */
wait_queue_head_t write_wait;
#ifndef _LINUX_TTY_FLIP_H
#define _LINUX_TTY_FLIP_H
+extern int tty_buffer_request_room(struct tty_struct *tty, size_t size);
+extern int tty_insert_flip_string(struct tty_struct *tty, unsigned char *chars, size_t size);
+extern int tty_insert_flip_string_flags(struct tty_struct *tty, unsigned char *chars, char *flags, size_t size);
+extern int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars, size_t size);
+extern int tty_prepare_flip_string_flags(struct tty_struct *tty, unsigned char **chars, char **flags, size_t size);
+
#ifdef INCLUDE_INLINE_FUNCS
#define _INLINE_ extern
#else
#define _INLINE_ static __inline__
#endif
-_INLINE_ void tty_insert_flip_char(struct tty_struct *tty,
+_INLINE_ int tty_insert_flip_char(struct tty_struct *tty,
unsigned char ch, char flag)
{
- if (tty->flip.count < TTY_FLIPBUF_SIZE) {
- tty->flip.count++;
- *tty->flip.flag_buf_ptr++ = flag;
- *tty->flip.char_buf_ptr++ = ch;
+ struct tty_buffer *tb = tty->buf.tail;
+ if (tb && tb->used < tb->size) {
+ tb->flag_buf_ptr[tb->used] = flag;
+ tb->char_buf_ptr[tb->used++] = ch;
+ return 1;
}
+ return tty_insert_flip_string_flags(tty, &ch, &flag, 1);
}
_INLINE_ void tty_schedule_flip(struct tty_struct *tty)
{
- schedule_delayed_work(&tty->flip.work, 1);
+ schedule_delayed_work(&tty->buf.work, 1);
}
#undef _INLINE_
* pointer of flag bytes which indicate whether a character was
* received with a parity error, etc.
*
- * int (*receive_room)(struct tty_struct *);
- *
- * This function is called by the low-level tty driver to
- * determine how many characters the line discpline can accept.
- * The low-level driver must not send more characters than was
- * indicated by receive_room, or the line discpline may drop
- * those characters.
- *
* void (*write_wakeup)(struct tty_struct *);
*
* This function is called by the low-level tty driver to signal
*/
void (*receive_buf)(struct tty_struct *, const unsigned char *cp,
char *fp, int count);
- int (*receive_room)(struct tty_struct *);
void (*write_wakeup)(struct tty_struct *);
struct module *owner;
BT_DBG("dlc %p tty %p len %d", dlc, tty, skb->len);
if (test_bit(TTY_DONT_FLIP, &tty->flags)) {
- register int i;
- for (i = 0; i < skb->len; i++) {
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- tty_flip_buffer_push(tty);
-
- tty_insert_flip_char(tty, skb->data[i], 0);
- }
+ tty_buffer_request_room(tty, skb->len);
+ tty_insert_flip_string(tty, skb->data, skb->len);
tty_flip_buffer_push(tty);
} else
tty->ldisc.receive_buf(tty, skb->data, NULL, skb->len);
projects / linux-2.6-omap-h63xx.git / commitdiff