]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[MIPS] Sibyte: Replace use of removed IO_SPACE_BASE with IOADDR.
authorRalf Baechle <ralf@linux-mips.org>
Tue, 6 Nov 2007 00:43:51 +0000 (00:43 +0000)
committerRalf Baechle <ralf@linux-mips.org>
Thu, 15 Nov 2007 23:21:49 +0000 (23:21 +0000)
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/mm/cerr-sb1.c
arch/mips/sibyte/bcm1480/irq.c

index e7f539e3284b91c232b44bbbaa1142d334260b1d..1bd1f18ac23c5d0fe0120555051b98bb5cb7169c 100644 (file)
@@ -154,7 +154,7 @@ static void check_bus_watcher(void)
        if (status & ~(1UL << 31)) {
                l2_err = csr_in32(IOADDR(A_BUS_L2_ERRORS));
 #ifdef DUMP_L2_ECC_TAG_ON_ERROR
-               l2_tag = in64(IO_SPACE_BASE | A_L2_ECC_TAG);
+               l2_tag = in64(IOADDR(A_L2_ECC_TAG));
 #endif
                memio_err = csr_in32(IOADDR(A_BUS_MEM_IO_ERRORS));
                printk("Bus watcher error counters: %08x %08x\n", l2_err, memio_err);
@@ -183,9 +183,9 @@ asmlinkage void sb1_cache_error(void)
 #ifdef CONFIG_SIBYTE_BW_TRACE
        /* Freeze the trace buffer now */
 #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
-       csr_out32(M_BCM1480_SCD_TRACE_CFG_FREEZE, IO_SPACE_BASE | A_SCD_TRACE_CFG);
+       csr_out32(M_BCM1480_SCD_TRACE_CFG_FREEZE, IOADDR(A_SCD_TRACE_CFG));
 #else
-       csr_out32(M_SCD_TRACE_CFG_FREEZE, IO_SPACE_BASE | A_SCD_TRACE_CFG);
+       csr_out32(M_SCD_TRACE_CFG_FREEZE, IOADDR(A_SCD_TRACE_CFG));
 #endif
        printk("Trace buffer frozen\n");
 #endif
index 3ba5ef358162a07e5c3b6ffbc87395b07fa372dc..db372a0f106d1e8631aff8c001ba2891448aebb7 100644 (file)
@@ -370,11 +370,11 @@ void __init arch_init_irq(void)
 #endif
                /* Setup uart 1 settings, mapper */
                /* QQQ FIXME */
-               __raw_writeq(M_DUART_IMR_BRK, IO_SPACE_BASE + A_DUART_IMRREG(kgdb_port));
+               __raw_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port)));
 
                __raw_writeq(IMR_IP6_VAL,
-                            IO_SPACE_BASE + A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
-                            (kgdb_irq<<3));
+                            IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
+                            (kgdb_irq << 3)));
                bcm1480_unmask_irq(0, kgdb_irq);
 
 #ifdef CONFIG_GDB_CONSOLE