struct workqueue_struct *ata_aux_wq;
+struct ata_force_param {
+ const char *name;
+ unsigned int cbl;
+ int spd_limit;
+ unsigned long xfer_mask;
+ unsigned int horkage_on;
+ unsigned int horkage_off;
+};
+
+struct ata_force_ent {
+ int port;
+ int device;
+ struct ata_force_param param;
+};
+
+static struct ata_force_ent *ata_force_tbl;
+static int ata_force_tbl_size;
+
+static char ata_force_param_buf[PAGE_SIZE] __initdata;
+module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf), 0444);
+MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link speed and transfer mode (see Documentation/kernel-parameters.txt for details)");
+
int atapi_enabled = 1;
module_param(atapi_enabled, int, 0444);
MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
MODULE_VERSION(DRV_VERSION);
+/**
+ * ata_force_cbl - force cable type according to libata.force
+ * @link: ATA link of interest
+ *
+ * Force cable type according to libata.force and whine about it.
+ * The last entry which has matching port number is used, so it
+ * can be specified as part of device force parameters. For
+ * example, both "a:40c,1.00:udma4" and "1.00:40c,udma4" have the
+ * same effect.
+ *
+ * LOCKING:
+ * EH context.
+ */
+void ata_force_cbl(struct ata_port *ap)
+{
+ int i;
+
+ for (i = ata_force_tbl_size - 1; i >= 0; i--) {
+ const struct ata_force_ent *fe = &ata_force_tbl[i];
+
+ if (fe->port != -1 && fe->port != ap->print_id)
+ continue;
+
+ if (fe->param.cbl == ATA_CBL_NONE)
+ continue;
+
+ ap->cbl = fe->param.cbl;
+ ata_port_printk(ap, KERN_NOTICE,
+ "FORCE: cable set to %s\n", fe->param.name);
+ return;
+ }
+}
+
+/**
+ * ata_force_spd_limit - force SATA spd limit according to libata.force
+ * @link: ATA link of interest
+ *
+ * Force SATA spd limit according to libata.force and whine about
+ * it. When only the port part is specified (e.g. 1:), the limit
+ * applies to all links connected to both the host link and all
+ * fan-out ports connected via PMP. If the device part is
+ * specified as 0 (e.g. 1.00:), it specifies the first fan-out
+ * link not the host link. Device number 15 always points to the
+ * host link whether PMP is attached or not.
+ *
+ * LOCKING:
+ * EH context.
+ */
+static void ata_force_spd_limit(struct ata_link *link)
+{
+ int linkno, i;
+
+ if (ata_is_host_link(link))
+ linkno = 15;
+ else
+ linkno = link->pmp;
+
+ for (i = ata_force_tbl_size - 1; i >= 0; i--) {
+ const struct ata_force_ent *fe = &ata_force_tbl[i];
+
+ if (fe->port != -1 && fe->port != link->ap->print_id)
+ continue;
+
+ if (fe->device != -1 && fe->device != linkno)
+ continue;
+
+ if (!fe->param.spd_limit)
+ continue;
+
+ link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1;
+ ata_link_printk(link, KERN_NOTICE,
+ "FORCE: PHY spd limit set to %s\n", fe->param.name);
+ return;
+ }
+}
+
+/**
+ * ata_force_xfermask - force xfermask according to libata.force
+ * @dev: ATA device of interest
+ *
+ * Force xfer_mask according to libata.force and whine about it.
+ * For consistency with link selection, device number 15 selects
+ * the first device connected to the host link.
+ *
+ * LOCKING:
+ * EH context.
+ */
+static void ata_force_xfermask(struct ata_device *dev)
+{
+ int devno = dev->link->pmp + dev->devno;
+ int alt_devno = devno;
+ int i;
+
+ /* allow n.15 for the first device attached to host port */
+ if (ata_is_host_link(dev->link) && devno == 0)
+ alt_devno = 15;
+
+ for (i = ata_force_tbl_size - 1; i >= 0; i--) {
+ const struct ata_force_ent *fe = &ata_force_tbl[i];
+ unsigned long pio_mask, mwdma_mask, udma_mask;
+
+ if (fe->port != -1 && fe->port != dev->link->ap->print_id)
+ continue;
+
+ if (fe->device != -1 && fe->device != devno &&
+ fe->device != alt_devno)
+ continue;
+
+ if (!fe->param.xfer_mask)
+ continue;
+
+ ata_unpack_xfermask(fe->param.xfer_mask,
+ &pio_mask, &mwdma_mask, &udma_mask);
+ if (udma_mask)
+ dev->udma_mask = udma_mask;
+ else if (mwdma_mask) {
+ dev->udma_mask = 0;
+ dev->mwdma_mask = mwdma_mask;
+ } else {
+ dev->udma_mask = 0;
+ dev->mwdma_mask = 0;
+ dev->pio_mask = pio_mask;
+ }
+
+ ata_dev_printk(dev, KERN_NOTICE,
+ "FORCE: xfer_mask set to %s\n", fe->param.name);
+ return;
+ }
+}
+
+/**
+ * ata_force_horkage - force horkage according to libata.force
+ * @dev: ATA device of interest
+ *
+ * Force horkage according to libata.force and whine about it.
+ * For consistency with link selection, device number 15 selects
+ * the first device connected to the host link.
+ *
+ * LOCKING:
+ * EH context.
+ */
+static void ata_force_horkage(struct ata_device *dev)
+{
+ int devno = dev->link->pmp + dev->devno;
+ int alt_devno = devno;
+ int i;
+
+ /* allow n.15 for the first device attached to host port */
+ if (ata_is_host_link(dev->link) && devno == 0)
+ alt_devno = 15;
+
+ for (i = 0; i < ata_force_tbl_size; i++) {
+ const struct ata_force_ent *fe = &ata_force_tbl[i];
+
+ if (fe->port != -1 && fe->port != dev->link->ap->print_id)
+ continue;
+
+ if (fe->device != -1 && fe->device != devno &&
+ fe->device != alt_devno)
+ continue;
+
+ if (!(~dev->horkage & fe->param.horkage_on) &&
+ !(dev->horkage & fe->param.horkage_off))
+ continue;
+
+ dev->horkage |= fe->param.horkage_on;
+ dev->horkage &= ~fe->param.horkage_off;
+
+ ata_dev_printk(dev, KERN_NOTICE,
+ "FORCE: horkage modified (%s)\n", fe->param.name);
+ }
+}
+
/**
* ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
* @tf: Taskfile to convert
/* set horkage */
dev->horkage |= ata_dev_blacklisted(dev);
+ ata_force_horkage(dev);
/* let ACPI work its magic */
rc = ata_acpi_on_devcfg(dev);
mode_mask = ATA_DMA_MASK_CFA;
ata_dev_xfermask(dev);
+ ata_force_xfermask(dev);
pio_mask = ata_pack_xfermask(dev->pio_mask, 0, 0);
dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask);
*/
int sata_link_init_spd(struct ata_link *link)
{
- u32 scontrol, spd;
+ u32 scontrol;
+ u8 spd;
int rc;
rc = sata_scr_read(link, SCR_CONTROL, &scontrol);
if (spd)
link->hw_sata_spd_limit &= (1 << spd) - 1;
+ ata_force_spd_limit(link);
+
link->sata_spd_limit = link->hw_sata_spd_limit;
return 0;
#endif /* CONFIG_PCI */
+static int __init ata_parse_force_one(char **cur,
+ struct ata_force_ent *force_ent,
+ const char **reason)
+{
+ /* FIXME: Currently, there's no way to tag init const data and
+ * using __initdata causes build failure on some versions of
+ * gcc. Once __initdataconst is implemented, add const to the
+ * following structure.
+ */
+ static struct ata_force_param force_tbl[] __initdata = {
+ { "40c", .cbl = ATA_CBL_PATA40 },
+ { "80c", .cbl = ATA_CBL_PATA80 },
+ { "short40c", .cbl = ATA_CBL_PATA40_SHORT },
+ { "unk", .cbl = ATA_CBL_PATA_UNK },
+ { "ign", .cbl = ATA_CBL_PATA_IGN },
+ { "sata", .cbl = ATA_CBL_SATA },
+ { "1.5Gbps", .spd_limit = 1 },
+ { "3.0Gbps", .spd_limit = 2 },
+ { "noncq", .horkage_on = ATA_HORKAGE_NONCQ },
+ { "ncq", .horkage_off = ATA_HORKAGE_NONCQ },
+ { "pio0", .xfer_mask = 1 << (ATA_SHIFT_PIO + 0) },
+ { "pio1", .xfer_mask = 1 << (ATA_SHIFT_PIO + 1) },
+ { "pio2", .xfer_mask = 1 << (ATA_SHIFT_PIO + 2) },
+ { "pio3", .xfer_mask = 1 << (ATA_SHIFT_PIO + 3) },
+ { "pio4", .xfer_mask = 1 << (ATA_SHIFT_PIO + 4) },
+ { "pio5", .xfer_mask = 1 << (ATA_SHIFT_PIO + 5) },
+ { "pio6", .xfer_mask = 1 << (ATA_SHIFT_PIO + 6) },
+ { "mwdma0", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 0) },
+ { "mwdma1", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 1) },
+ { "mwdma2", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 2) },
+ { "mwdma3", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 3) },
+ { "mwdma4", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 4) },
+ { "udma0", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 0) },
+ { "udma16", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 0) },
+ { "udma/16", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 0) },
+ { "udma1", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 1) },
+ { "udma25", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 1) },
+ { "udma/25", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 1) },
+ { "udma2", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 2) },
+ { "udma33", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 2) },
+ { "udma/33", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 2) },
+ { "udma3", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 3) },
+ { "udma44", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 3) },
+ { "udma/44", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 3) },
+ { "udma4", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 4) },
+ { "udma66", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 4) },
+ { "udma/66", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 4) },
+ { "udma5", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 5) },
+ { "udma100", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 5) },
+ { "udma/100", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 5) },
+ { "udma6", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) },
+ { "udma133", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) },
+ { "udma/133", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) },
+ { "udma7", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 7) },
+ };
+ char *start = *cur, *p = *cur;
+ char *id, *val, *endp;
+ const struct ata_force_param *match_fp = NULL;
+ int nr_matches = 0, i;
+
+ /* find where this param ends and update *cur */
+ while (*p != '\0' && *p != ',')
+ p++;
+
+ if (*p == '\0')
+ *cur = p;
+ else
+ *cur = p + 1;
+
+ *p = '\0';
+
+ /* parse */
+ p = strchr(start, ':');
+ if (!p) {
+ val = strstrip(start);
+ goto parse_val;
+ }
+ *p = '\0';
+
+ id = strstrip(start);
+ val = strstrip(p + 1);
+
+ /* parse id */
+ p = strchr(id, '.');
+ if (p) {
+ *p++ = '\0';
+ force_ent->device = simple_strtoul(p, &endp, 10);
+ if (p == endp || *endp != '\0') {
+ *reason = "invalid device";
+ return -EINVAL;
+ }
+ }
+
+ force_ent->port = simple_strtoul(id, &endp, 10);
+ if (p == endp || *endp != '\0') {
+ *reason = "invalid port/link";
+ return -EINVAL;
+ }
+
+ parse_val:
+ /* parse val, allow shortcuts so that both 1.5 and 1.5Gbps work */
+ for (i = 0; i < ARRAY_SIZE(force_tbl); i++) {
+ const struct ata_force_param *fp = &force_tbl[i];
+
+ if (strncasecmp(val, fp->name, strlen(val)))
+ continue;
+
+ nr_matches++;
+ match_fp = fp;
+
+ if (strcasecmp(val, fp->name) == 0) {
+ nr_matches = 1;
+ break;
+ }
+ }
+
+ if (!nr_matches) {
+ *reason = "unknown value";
+ return -EINVAL;
+ }
+ if (nr_matches > 1) {
+ *reason = "ambigious value";
+ return -EINVAL;
+ }
+
+ force_ent->param = *match_fp;
+
+ return 0;
+}
+
+static void __init ata_parse_force_param(void)
+{
+ int idx = 0, size = 1;
+ int last_port = -1, last_device = -1;
+ char *p, *cur, *next;
+
+ /* calculate maximum number of params and allocate force_tbl */
+ for (p = ata_force_param_buf; *p; p++)
+ if (*p == ',')
+ size++;
+
+ ata_force_tbl = kzalloc(sizeof(ata_force_tbl[0]) * size, GFP_KERNEL);
+ if (!ata_force_tbl) {
+ printk(KERN_WARNING "ata: failed to extend force table, "
+ "libata.force ignored\n");
+ return;
+ }
+
+ /* parse and populate the table */
+ for (cur = ata_force_param_buf; *cur != '\0'; cur = next) {
+ const char *reason = "";
+ struct ata_force_ent te = { .port = -1, .device = -1 };
+
+ next = cur;
+ if (ata_parse_force_one(&next, &te, &reason)) {
+ printk(KERN_WARNING "ata: failed to parse force "
+ "parameter \"%s\" (%s)\n",
+ cur, reason);
+ continue;
+ }
+
+ if (te.port == -1) {
+ te.port = last_port;
+ te.device = last_device;
+ }
+
+ ata_force_tbl[idx++] = te;
+
+ last_port = te.port;
+ last_device = te.device;
+ }
+
+ ata_force_tbl_size = idx;
+}
static int __init ata_init(void)
{
ata_probe_timeout *= HZ;
+
+ ata_parse_force_param();
+
ata_wq = create_workqueue("ata");
if (!ata_wq)
return -ENOMEM;
static void __exit ata_exit(void)
{
+ kfree(ata_force_tbl);
destroy_workqueue(ata_wq);
destroy_workqueue(ata_aux_wq);
}
projects / linux-2.6-omap-h63xx.git / commitdiff