]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[ARM] 3956/1: AT91: Carmeva board update
authorAndrew Victor <andrew@sanpeople.com>
Fri, 1 Dec 2006 09:31:29 +0000 (10:31 +0100)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Fri, 1 Dec 2006 13:53:57 +0000 (13:53 +0000)
This patch updates the Carmeva board support:
      * Specify the MMC Write-protect and Detection pins.
      * Add configuration of SPI devices.

Patch from Peer Georgi.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
arch/arm/configs/carmeva_defconfig
arch/arm/mach-at91rm9200/board-carmeva.c

index d24ae8777c35d2b4d20bc77b1d012a71cc662ca2..d392833b31fbb40bf30f481218854a5244eb77a5 100644 (file)
@@ -474,7 +474,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_WATCHDOG is not set
 # CONFIG_NVRAM is not set
 # CONFIG_RTC is not set
-# CONFIG_AT91_RTC is not set
+# CONFIG_AT91RM9200_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
index 98208740e7c52f1be6aa1f5d9a62c655fa7cd92c..5cd68e6001efe1f75c97e2e2751e9173fa541dfb 100644 (file)
@@ -65,7 +65,6 @@ static void __init carmeva_init_irq(void)
        at91rm9200_init_interrupts(NULL);
 }
 
-
 static struct at91_eth_data __initdata carmeva_eth_data = {
        .phy_irq_pin    = AT91_PIN_PC4,
        .is_rmii        = 1,
@@ -91,6 +90,31 @@ static struct at91_udc_data __initdata carmeva_udc_data = {
 static struct at91_mmc_data __initdata carmeva_mmc_data = {
        .is_b           = 0,
        .wire4          = 1,
+       .det_pin        = AT91_PIN_PB10,
+       .wp_pin         = AT91_PIN_PC14,
+};
+
+static struct spi_board_info carmeva_spi_devices[] = {
+       { /* DataFlash chip */
+               .modalias = "mtd_dataflash",
+               .chip_select  = 0,
+               .max_speed_hz = 10 * 1000 * 1000,
+       },
+       { /* User accessable spi - cs1 (250KHz) */
+               .modalias = "spi-cs1",
+               .chip_select  = 1,
+               .max_speed_hz = 250 *  1000,
+       },
+       { /* User accessable spi - cs2 (1MHz) */
+               .modalias = "spi-cs2",
+               .chip_select  = 2,
+               .max_speed_hz = 1 * 1000 *  1000,
+       },
+       { /* User accessable spi - cs3 (10MHz) */
+               .modalias = "spi-cs3",
+               .chip_select  = 3,
+               .max_speed_hz = 10 * 1000 *  1000,
+       },
 };
 
 static void __init carmeva_board_init(void)
@@ -105,10 +129,10 @@ static void __init carmeva_board_init(void)
        at91_add_device_udc(&carmeva_udc_data);
        /* I2C */
        at91_add_device_i2c();
+       /* SPI */
+       at91_add_device_spi(carmeva_spi_devices, ARRAY_SIZE(carmeva_spi_devices));
        /* Compact Flash */
 //     at91_add_device_cf(&carmeva_cf_data);
-       /* SPI */
-//     at91_add_device_spi(NULL, 0);
        /* MMC */
        at91_add_device_mmc(&carmeva_mmc_data);
 }