/*
- * linux/drivers/ide/pci/siimage.c Version 1.12 Mar 10 2007
+ * linux/drivers/ide/pci/siimage.c Version 1.15 Jun 29 2007
*
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2003 Red Hat <alan@redhat.com>
* Copyright (C) 2007 MontaVista Software, Inc.
+ * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
* May be copied or modified under the terms of the GNU General Public License
*
* unplugging/replugging the virtual CD interface when the DRAC is reset.
* This often causes drivers/ide/siimage to panic but is ok with the rather
* smarter code in libata.
+ *
+ * TODO:
+ * - IORDY fixes
+ * - VDMA support
*/
#include <linux/types.h>
}
/**
- * siimage_taskfile_timing - turn timing data to a mode
- * @hwif: interface to query
- *
- * Read the timing data for the interface and return the
- * mode that is being used.
- */
-
-static byte siimage_taskfile_timing (ide_hwif_t *hwif)
-{
- u16 timing = 0x328a;
- unsigned long addr = siimage_selreg(hwif, 2);
-
- if (hwif->mmio)
- timing = hwif->INW(addr);
- else
- pci_read_config_word(hwif->pci_dev, addr, &timing);
-
- switch (timing) {
- case 0x10c1: return 4;
- case 0x10c3: return 3;
- case 0x1104:
- case 0x1281: return 2;
- case 0x2283: return 1;
- case 0x328a:
- default: return 0;
- }
-}
-
-/**
- * simmage_tuneproc - tune a drive
+ * sil_tune_pio - tune a drive
* @drive: drive to tune
- * @mode_wanted: the target operating mode
+ * @pio: the desired PIO mode
*
* Load the timing settings for this device mode into the
* controller. If we are in PIO mode 3 or 4 turn on IORDY
* monitoring (bit 9). The TF timing is bits 31:16
*/
-
-static void siimage_tuneproc (ide_drive_t *drive, byte mode_wanted)
+
+static void sil_tune_pio(ide_drive_t *drive, u8 pio)
{
+ const u16 tf_speed[] = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 };
+ const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 };
+
ide_hwif_t *hwif = HWIF(drive);
+ ide_drive_t *pair = &hwif->drives[drive->dn ^ 1];
u32 speedt = 0;
u16 speedp = 0;
unsigned long addr = siimage_seldev(drive, 0x04);
unsigned long tfaddr = siimage_selreg(hwif, 0x02);
-
- /* cheat for now and use the docs */
- switch (mode_wanted) {
- case 4:
- speedp = 0x10c1;
- speedt = 0x10c1;
- break;
- case 3:
- speedp = 0x10c3;
- speedt = 0x10c3;
- break;
- case 2:
- speedp = 0x1104;
- speedt = 0x1281;
- break;
- case 1:
- speedp = 0x2283;
- speedt = 0x2283;
- break;
- case 0:
- default:
- speedp = 0x328a;
- speedt = 0x328a;
- break;
+ u8 tf_pio = pio;
+
+ /* trim *taskfile* PIO to the slowest of the master/slave */
+ if (pair->present) {
+ u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4, NULL);
+
+ if (pair_pio < tf_pio)
+ tf_pio = pair_pio;
}
+ /* cheat for now and use the docs */
+ speedp = data_speed[pio];
+ speedt = tf_speed[tf_pio];
+
if (hwif->mmio) {
hwif->OUTW(speedp, addr);
hwif->OUTW(speedt, tfaddr);
/* Now set up IORDY */
- if(mode_wanted == 3 || mode_wanted == 4)
+ if (pio > 2)
hwif->OUTW(hwif->INW(tfaddr-2)|0x200, tfaddr-2);
else
hwif->OUTW(hwif->INW(tfaddr-2)&~0x200, tfaddr-2);
pci_read_config_word(hwif->pci_dev, tfaddr-2, &speedp);
speedp &= ~0x200;
/* Set IORDY for mode 3 or 4 */
- if(mode_wanted == 3 || mode_wanted == 4)
+ if (pio > 2)
speedp |= 0x200;
pci_write_config_word(hwif->pci_dev, tfaddr-2, speedp);
}
}
-/**
- * config_siimage_chipset_for_pio - set drive timings
- * @drive: drive to tune
- * @speed we want
- *
- * Compute the best pio mode we can for a given device. Also honour
- * the timings for the driver when dealing with mixed devices. Some
- * of this is ugly but its all wrapped up here
- *
- * The SI680 can also do VDMA - we need to start using that
- *
- * FIXME: we use the BIOS channel timings to avoid driving the task
- * files too fast at the disk. We need to compute the master/slave
- * drive PIO mode properly so that we can up the speed on a hotplug
- * system.
- */
-
-static void config_siimage_chipset_for_pio (ide_drive_t *drive, byte set_speed)
+static void sil_tuneproc(ide_drive_t *drive, u8 pio)
{
- u8 channel_timings = siimage_taskfile_timing(HWIF(drive));
- u8 speed = 0, set_pio = ide_get_best_pio_mode(drive, 4, 5, NULL);
-
- /* WARNING PIO timing mess is going to happen b/w devices, argh */
- if ((channel_timings != set_pio) && (set_pio > channel_timings))
- set_pio = channel_timings;
-
- siimage_tuneproc(drive, set_pio);
- speed = XFER_PIO_0 + set_pio;
- if (set_speed)
- (void) ide_config_drive_speed(drive, speed);
+ pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ sil_tune_pio(drive, pio);
+ (void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
/**
case XFER_PIO_2:
case XFER_PIO_1:
case XFER_PIO_0:
- siimage_tuneproc(drive, (speed - XFER_PIO_0));
+ sil_tune_pio(drive, speed - XFER_PIO_0);
mode |= ((unit) ? 0x10 : 0x01);
break;
case XFER_MW_DMA_2:
case XFER_MW_DMA_0:
multi = dma[speed - XFER_MW_DMA_0];
mode |= ((unit) ? 0x20 : 0x02);
- config_siimage_chipset_for_pio(drive, 0);
break;
case XFER_UDMA_6:
case XFER_UDMA_5:
ultra |= ((scsc) ? (ultra6[speed - XFER_UDMA_0]) :
(ultra5[speed - XFER_UDMA_0]));
mode |= ((unit) ? 0x30 : 0x03);
- config_siimage_chipset_for_pio(drive, 0);
break;
default:
return 1;
return 0;
if (ide_use_fast_pio(drive))
- config_siimage_chipset_for_pio(drive, 1);
+ sil_tuneproc(drive, 255);
return -1;
}
hwif->resetproc = &siimage_reset;
hwif->speedproc = &siimage_tune_chipset;
- hwif->tuneproc = &siimage_tuneproc;
+ hwif->tuneproc = &sil_tuneproc;
hwif->reset_poll = &siimage_reset_poll;
hwif->pre_reset = &siimage_pre_reset;
hwif->udma_filter = &sil_udma_filter;
first = 0;
}
}
- if (!hwif->dma_base) {
- hwif->drives[0].autotune = 1;
- hwif->drives[1].autotune = 1;
+
+ hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
+
+ if (hwif->dma_base == 0)
return;
- }
hwif->ultra_mask = 0x7f;
hwif->mwdma_mask = 0x07;
projects / linux-2.6-omap-h63xx.git / commitdiff