]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
sound: ASoC: Add WM8750 SPI support
authorMark Brown <broonie@opensource.wolfsonmicro.com>
Tue, 16 Sep 2008 11:51:26 +0000 (12:51 +0100)
committerJaroslav Kysela <perex@perex.cz>
Tue, 23 Sep 2008 06:18:19 +0000 (08:18 +0200)
Implement SPI support for WM8750, cut'n'pasting from the support for
WM8731 contributed by Cliff Cai and Alan Horstmann since the wire format
is the same for both codecs.

Also fix a cut'n'pasted comment in the I2C side of the driver (which was
clearly written in the same way) while we're at it.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
sound/soc/codecs/wm8750.c
sound/soc/codecs/wm8750.h

index 9847aa064d6b1c1d414ecacaf9ab4e6dbd9de0fd..4892e398a5982fa89b87ecbd1d2ceaa6fdc3af53 100644 (file)
@@ -19,6 +19,7 @@
 #include <linux/pm.h>
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
+#include <linux/spi/spi.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
@@ -841,7 +842,7 @@ static struct snd_soc_device *wm8750_socdev;
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 
 /*
- * WM8731 2 wire address is determined by GPIO5
+ * WM8750 2 wire address is determined by GPIO5
  * state during powerup.
  *    low  = 0x1a
  *    high = 0x1b
@@ -928,6 +929,62 @@ err_driver:
 }
 #endif
 
+#if defined(CONFIG_SPI_MASTER)
+static int __devinit wm8750_spi_probe(struct spi_device *spi)
+{
+       struct snd_soc_device *socdev = wm8750_socdev;
+       struct snd_soc_codec *codec = socdev->codec;
+       int ret;
+
+       codec->control_data = spi;
+
+       ret = wm8750_init(socdev);
+       if (ret < 0)
+               dev_err(&spi->dev, "failed to initialise WM8750\n");
+
+       return ret;
+}
+
+static int __devexit wm8750_spi_remove(struct spi_device *spi)
+{
+       return 0;
+}
+
+static struct spi_driver wm8750_spi_driver = {
+       .driver = {
+               .name   = "wm8750",
+               .bus    = &spi_bus_type,
+               .owner  = THIS_MODULE,
+       },
+       .probe          = wm8750_spi_probe,
+       .remove         = __devexit_p(wm8750_spi_remove),
+};
+
+static int wm8750_spi_write(struct spi_device *spi, const char *data, int len)
+{
+       struct spi_transfer t;
+       struct spi_message m;
+       u8 msg[2];
+
+       if (len <= 0)
+               return 0;
+
+       msg[0] = data[0];
+       msg[1] = data[1];
+
+       spi_message_init(&m);
+       memset(&t, 0, (sizeof t));
+
+       t.tx_buf = &msg[0];
+       t.len = len;
+
+       spi_message_add_tail(&t, &m);
+       spi_sync(spi, &m);
+
+       return len;
+}
+#endif
+
 static int wm8750_probe(struct platform_device *pdev)
 {
        struct snd_soc_device *socdev = platform_get_drvdata(pdev);
@@ -963,6 +1020,14 @@ static int wm8750_probe(struct platform_device *pdev)
                ret = wm8750_add_i2c_device(pdev, setup);
        }
 #endif
+#if defined(CONFIG_SPI_MASTER)
+       if (setup->spi) {
+               codec->hw_write = (hw_write_t)wm8750_spi_write;
+               ret = spi_register_driver(&wm8750_spi_driver);
+               if (ret != 0)
+                       printk(KERN_ERR "can't add spi driver");
+       }
+#endif
 
        if (ret != 0) {
                kfree(codec->private_data);
@@ -1004,6 +1069,9 @@ static int wm8750_remove(struct platform_device *pdev)
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
        i2c_unregister_device(codec->control_data);
        i2c_del_driver(&wm8750_i2c_driver);
+#endif
+#if defined(CONFIG_SPI_MASTER)
+       spi_unregister_driver(&wm8750_spi_driver);
 #endif
        kfree(codec->private_data);
        kfree(codec);
index fe6c80f7d9e288d9f25b1d55b427f664adf03a60..1dc100e19cfe3076019a4c564999f4e061844b4d 100644 (file)
@@ -58,6 +58,7 @@
 #define WM8750_SYSCLK  0
 
 struct wm8750_setup_data {
+       int spi;
        int i2c_bus;
        unsigned short i2c_address;
 };