tehuti: convert to net_device_ops

Convert driver to new net_device_ops. Compile tested only.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 7e36a10423f9cdaddd85b799e17eee4a174f870d..5b83fbb02013fa57d64a0e290ddba485e84f8a7f 100644 (file)
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -1885,6 +1885,21 @@ static void bdx_tx_push_desc_safe(struct bdx_priv *priv, void *data, int size)
        RET();
 }
 
+static const struct net_device_ops bdx_netdev_ops = {
+       .ndo_open               = bdx_open,
+       .ndo_stop               = bdx_close,
+       .ndo_start_xmit         = bdx_tx_transmit,
+       .ndo_validate_addr      = eth_validate_addr,
+       .ndo_do_ioctl           = bdx_ioctl,
+       .ndo_set_multicast_list = bdx_setmulti,
+       .ndo_get_stats          = bdx_get_stats,
+       .ndo_change_mtu         = bdx_change_mtu,
+       .ndo_set_mac_address    = bdx_set_mac,
+       .ndo_vlan_rx_register   = bdx_vlan_rx_register,
+       .ndo_vlan_rx_add_vid    = bdx_vlan_rx_add_vid,
+       .ndo_vlan_rx_kill_vid   = bdx_vlan_rx_kill_vid,
+};
+
 /**
  * bdx_probe - Device Initialization Routine
  * @pdev: PCI device information struct
@@ -1994,18 +2009,8 @@ bdx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
                        goto err_out_iomap;
                }
 
-               ndev->open = bdx_open;
-               ndev->stop = bdx_close;
-               ndev->hard_start_xmit = bdx_tx_transmit;
-               ndev->do_ioctl = bdx_ioctl;
-               ndev->set_multicast_list = bdx_setmulti;
-               ndev->get_stats = bdx_get_stats;
-               ndev->change_mtu = bdx_change_mtu;
-               ndev->set_mac_address = bdx_set_mac;
+               ndev->netdev_ops = &bdx_netdev_ops;
                ndev->tx_queue_len = BDX_NDEV_TXQ_LEN;
-               ndev->vlan_rx_register = bdx_vlan_rx_register;
-               ndev->vlan_rx_add_vid = bdx_vlan_rx_add_vid;
-               ndev->vlan_rx_kill_vid = bdx_vlan_rx_kill_vid;
 
                bdx_ethtool_ops(ndev);  /* ethtool interface */