]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[ARM] pxa: make pxa2xx_spi driver use ssp_request()/ssp_free()
authoreric miao <eric.miao@marvell.com>
Wed, 21 Nov 2007 10:50:53 +0000 (18:50 +0800)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Sat, 26 Jan 2008 15:07:52 +0000 (15:07 +0000)
1. make pxa2xx_spi.c use ssp_request() and ssp_free() to get the common
   information of the designated SSP port.

2. remove those IRQ/memory request code, ssp_request() has done that for
   the driver

3. the SPI platform device is thus made psuedo, no resource (memory/IRQ)
   has to be defined, all will be retreived by ssp_request()

4. introduce ssp_get_clk_div() to handle controller difference in clock
   divisor setting

5. use clk_xxx() API for clock enable/disable, and clk_get_rate() to
   handle the different SSP clock frequency between different processors

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
arch/arm/mach-pxa/lubbock.c
drivers/spi/Kconfig
drivers/spi/pxa2xx_spi.c
include/asm-arm/arch-pxa/pxa2xx_spi.h

index 1d3112dc629ea38a76f203adac5f96affe6b0f20..ebb73f1334861e112dc28f1fddfff6b0a52d0007 100644 (file)
@@ -206,30 +206,13 @@ static struct resource smc91x_resources[] = {
  * (to J5) and poking board registers (as done below).  Else it's only useful
  * for the temperature sensors.
  */
-static struct resource pxa_ssp_resources[] = {
-       [0] = {
-               .start  = __PREG(SSCR0_P(1)),
-               .end    = __PREG(SSCR0_P(1)) + 0x14,
-               .flags  = IORESOURCE_MEM,
-       },
-       [1] = {
-               .start  = IRQ_SSP,
-               .end    = IRQ_SSP,
-               .flags  = IORESOURCE_IRQ,
-       },
-};
-
 static struct pxa2xx_spi_master pxa_ssp_master_info = {
-       .ssp_type       = PXA25x_SSP,
-       .clock_enable   = CKEN_SSP,
        .num_chipselect = 0,
 };
 
 static struct platform_device pxa_ssp = {
        .name           = "pxa2xx-spi",
        .id             = 1,
-       .resource       = pxa_ssp_resources,
-       .num_resources  = ARRAY_SIZE(pxa_ssp_resources),
        .dev = {
                .platform_data  = &pxa_ssp_master_info,
        },
index abf05048c638ee224db9b5fcf7f708a6aeccf5f5..aaaea81e412aa81abe5f2f1ced1b89152044c4a3 100644 (file)
@@ -153,6 +153,7 @@ config SPI_OMAP24XX
 config SPI_PXA2XX
        tristate "PXA2xx SSP SPI master"
        depends on SPI_MASTER && ARCH_PXA && EXPERIMENTAL
+       select PXA_SSP
        help
          This enables using a PXA2xx SSP port as a SPI master controller.
          The driver can be configured to use any SSP port and additional
index 0ac0f65f69a1a846ba2904c7f42f2f48b67f54f7..eb817b8eb02439eeb12944e89fc2f55749adc009 100644 (file)
@@ -27,6 +27,7 @@
 #include <linux/spi/spi.h>
 #include <linux/workqueue.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -37,6 +38,7 @@
 #include <asm/arch/hardware.h>
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/regs-ssp.h>
+#include <asm/arch/ssp.h>
 #include <asm/arch/pxa2xx_spi.h>
 
 MODULE_AUTHOR("Stephen Street");
@@ -81,6 +83,9 @@ struct driver_data {
        /* Driver model hookup */
        struct platform_device *pdev;
 
+       /* SSP Info */
+       struct ssp_device *ssp;
+
        /* SPI framework hookup */
        enum pxa_ssp_type ssp_type;
        struct spi_master *master;
@@ -779,6 +784,16 @@ int set_dma_burst_and_threshold(struct chip_data *chip, struct spi_device *spi,
        return retval;
 }
 
+static unsigned int ssp_get_clk_div(struct ssp_device *ssp, int rate)
+{
+       unsigned long ssp_clk = clk_get_rate(ssp->clk);
+
+       if (ssp->type == PXA25x_SSP)
+               return ((ssp_clk / (2 * rate) - 1) & 0xff) << 8;
+       else
+               return ((ssp_clk / rate - 1) & 0xfff) << 8;
+}
+
 static void pump_transfers(unsigned long data)
 {
        struct driver_data *drv_data = (struct driver_data *)data;
@@ -786,6 +801,7 @@ static void pump_transfers(unsigned long data)
        struct spi_transfer *transfer = NULL;
        struct spi_transfer *previous = NULL;
        struct chip_data *chip = NULL;
+       struct ssp_device *ssp = drv_data->ssp;
        void *reg = drv_data->ioaddr;
        u32 clk_div = 0;
        u8 bits = 0;
@@ -867,12 +883,7 @@ static void pump_transfers(unsigned long data)
                if (transfer->bits_per_word)
                        bits = transfer->bits_per_word;
 
-               if (reg == SSP1_VIRT)
-                       clk_div = SSP1_SerClkDiv(speed);
-               else if (reg == SSP2_VIRT)
-                       clk_div = SSP2_SerClkDiv(speed);
-               else if (reg == SSP3_VIRT)
-                       clk_div = SSP3_SerClkDiv(speed);
+               clk_div = ssp_get_clk_div(ssp, speed);
 
                if (bits <= 8) {
                        drv_data->n_bytes = 1;
@@ -1075,6 +1086,7 @@ static int setup(struct spi_device *spi)
        struct pxa2xx_spi_chip *chip_info = NULL;
        struct chip_data *chip;
        struct driver_data *drv_data = spi_master_get_devdata(spi->master);
+       struct ssp_device *ssp = drv_data->ssp;
        unsigned int clk_div;
 
        if (!spi->bits_per_word)
@@ -1158,18 +1170,7 @@ static int setup(struct spi_device *spi)
                }
        }
 
-       if (drv_data->ioaddr == SSP1_VIRT)
-               clk_div = SSP1_SerClkDiv(spi->max_speed_hz);
-       else if (drv_data->ioaddr == SSP2_VIRT)
-               clk_div = SSP2_SerClkDiv(spi->max_speed_hz);
-       else if (drv_data->ioaddr == SSP3_VIRT)
-               clk_div = SSP3_SerClkDiv(spi->max_speed_hz);
-       else
-       {
-               dev_err(&spi->dev, "failed setup: unknown IO address=0x%p\n",
-                       drv_data->ioaddr);
-               return -ENODEV;
-       }
+       clk_div = ssp_get_clk_div(ssp, spi->max_speed_hz);
        chip->speed_hz = spi->max_speed_hz;
 
        chip->cr0 = clk_div
@@ -1184,15 +1185,15 @@ static int setup(struct spi_device *spi)
 
        /* NOTE:  PXA25x_SSP _could_ use external clocking ... */
        if (drv_data->ssp_type != PXA25x_SSP)
-               dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n",
+               dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d\n",
                                spi->bits_per_word,
-                               (CLOCK_SPEED_HZ)
+                               clk_get_rate(ssp->clk)
                                        / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
                                spi->mode & 0x3);
        else
-               dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n",
+               dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d\n",
                                spi->bits_per_word,
-                               (CLOCK_SPEED_HZ/2)
+                               clk_get_rate(ssp->clk)
                                        / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
                                spi->mode & 0x3);
 
@@ -1324,14 +1325,14 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev)
        struct pxa2xx_spi_master *platform_info;
        struct spi_master *master;
        struct driver_data *drv_data = 0;
-       struct resource *memory_resource;
-       int irq;
+       struct ssp_device *ssp;
        int status = 0;
 
        platform_info = dev->platform_data;
 
-       if (platform_info->ssp_type == SSP_UNDEFINED) {
-               dev_err(&pdev->dev, "undefined SSP\n");
+       ssp = ssp_request(pdev->id, pdev->name);
+       if (ssp == NULL) {
+               dev_err(&pdev->dev, "failed to request SSP%d\n", pdev->id);
                return -ENODEV;
        }
 
@@ -1339,12 +1340,14 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev)
        master = spi_alloc_master(dev, sizeof(struct driver_data) + 16);
        if (!master) {
                dev_err(&pdev->dev, "can not alloc spi_master\n");
+               ssp_free(ssp);
                return -ENOMEM;
        }
        drv_data = spi_master_get_devdata(master);
        drv_data->master = master;
        drv_data->master_info = platform_info;
        drv_data->pdev = pdev;
+       drv_data->ssp = ssp;
 
        master->bus_num = pdev->id;
        master->num_chipselect = platform_info->num_chipselect;
@@ -1352,21 +1355,13 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev)
        master->setup = setup;
        master->transfer = transfer;
 
-       drv_data->ssp_type = platform_info->ssp_type;
+       drv_data->ssp_type = ssp->type;
        drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data +
                                                sizeof(struct driver_data)), 8);
 
-       /* Setup register addresses */
-       memory_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       if (!memory_resource) {
-               dev_err(&pdev->dev, "memory resources not defined\n");
-               status = -ENODEV;
-               goto out_error_master_alloc;
-       }
-
-       drv_data->ioaddr = (void *)io_p2v((unsigned long)(memory_resource->start));
-       drv_data->ssdr_physical = memory_resource->start + 0x00000010;
-       if (platform_info->ssp_type == PXA25x_SSP) {
+       drv_data->ioaddr = ssp->mmio_base;
+       drv_data->ssdr_physical = ssp->phys_base + SSDR;
+       if (ssp->type == PXA25x_SSP) {
                drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE;
                drv_data->dma_cr1 = 0;
                drv_data->clear_sr = SSSR_ROR;
@@ -1378,15 +1373,7 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev)
                drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS | SSSR_ROR;
        }
 
-       /* Attach to IRQ */
-       irq = platform_get_irq(pdev, 0);
-       if (irq < 0) {
-               dev_err(&pdev->dev, "irq resource not defined\n");
-               status = -ENODEV;
-               goto out_error_master_alloc;
-       }
-
-       status = request_irq(irq, ssp_int, 0, dev->bus_id, drv_data);
+       status = request_irq(ssp->irq, ssp_int, 0, dev->bus_id, drv_data);
        if (status < 0) {
                dev_err(&pdev->dev, "can not get IRQ\n");
                goto out_error_master_alloc;
@@ -1419,29 +1406,12 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev)
                        goto out_error_dma_alloc;
                }
 
-               if (drv_data->ioaddr == SSP1_VIRT) {
-                               DRCMRRXSSDR = DRCMR_MAPVLD
-                                               | drv_data->rx_channel;
-                               DRCMRTXSSDR = DRCMR_MAPVLD
-                                               | drv_data->tx_channel;
-               } else if (drv_data->ioaddr == SSP2_VIRT) {
-                               DRCMRRXSS2DR = DRCMR_MAPVLD
-                                               | drv_data->rx_channel;
-                               DRCMRTXSS2DR = DRCMR_MAPVLD
-                                               | drv_data->tx_channel;
-               } else if (drv_data->ioaddr == SSP3_VIRT) {
-                               DRCMRRXSS3DR = DRCMR_MAPVLD
-                                               | drv_data->rx_channel;
-                               DRCMRTXSS3DR = DRCMR_MAPVLD
-                                               | drv_data->tx_channel;
-               } else {
-                       dev_err(dev, "bad SSP type\n");
-                       goto out_error_dma_alloc;
-               }
+               DRCMR(ssp->drcmr_rx) = DRCMR_MAPVLD | drv_data->rx_channel;
+               DRCMR(ssp->drcmr_tx) = DRCMR_MAPVLD | drv_data->tx_channel;
        }
 
        /* Enable SOC clock */
-       pxa_set_cken(platform_info->clock_enable, 1);
+       clk_enable(ssp->clk);
 
        /* Load default SSP configuration */
        write_SSCR0(0, drv_data->ioaddr);
@@ -1480,7 +1450,7 @@ out_error_queue_alloc:
        destroy_queue(drv_data);
 
 out_error_clock_enabled:
-       pxa_set_cken(platform_info->clock_enable, 0);
+       clk_disable(ssp->clk);
 
 out_error_dma_alloc:
        if (drv_data->tx_channel != -1)
@@ -1489,17 +1459,18 @@ out_error_dma_alloc:
                pxa_free_dma(drv_data->rx_channel);
 
 out_error_irq_alloc:
-       free_irq(irq, drv_data);
+       free_irq(ssp->irq, drv_data);
 
 out_error_master_alloc:
        spi_master_put(master);
+       ssp_free(ssp);
        return status;
 }
 
 static int pxa2xx_spi_remove(struct platform_device *pdev)
 {
        struct driver_data *drv_data = platform_get_drvdata(pdev);
-       int irq;
+       struct ssp_device *ssp = drv_data->ssp;
        int status = 0;
 
        if (!drv_data)
@@ -1521,28 +1492,21 @@ static int pxa2xx_spi_remove(struct platform_device *pdev)
 
        /* Disable the SSP at the peripheral and SOC level */
        write_SSCR0(0, drv_data->ioaddr);
-       pxa_set_cken(drv_data->master_info->clock_enable, 0);
+       clk_disable(ssp->clk);
 
        /* Release DMA */
        if (drv_data->master_info->enable_dma) {
-               if (drv_data->ioaddr == SSP1_VIRT) {
-                       DRCMRRXSSDR = 0;
-                       DRCMRTXSSDR = 0;
-               } else if (drv_data->ioaddr == SSP2_VIRT) {
-                       DRCMRRXSS2DR = 0;
-                       DRCMRTXSS2DR = 0;
-               } else if (drv_data->ioaddr == SSP3_VIRT) {
-                       DRCMRRXSS3DR = 0;
-                       DRCMRTXSS3DR = 0;
-               }
+               DRCMR(ssp->drcmr_rx) = 0;
+               DRCMR(ssp->drcmr_tx) = 0;
                pxa_free_dma(drv_data->tx_channel);
                pxa_free_dma(drv_data->rx_channel);
        }
 
        /* Release IRQ */
-       irq = platform_get_irq(pdev, 0);
-       if (irq >= 0)
-               free_irq(irq, drv_data);
+       free_irq(ssp->irq, drv_data);
+
+       /* Release SSP */
+       ssp_free(ssp);
 
        /* Disconnect from the SPI framework */
        spi_unregister_master(drv_data->master);
@@ -1577,6 +1541,7 @@ static int suspend_devices(struct device *dev, void *pm_message)
 static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state)
 {
        struct driver_data *drv_data = platform_get_drvdata(pdev);
+       struct ssp_device *ssp = drv_data->ssp;
        int status = 0;
 
        /* Check all childern for current power state */
@@ -1589,7 +1554,7 @@ static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state)
        if (status != 0)
                return status;
        write_SSCR0(0, drv_data->ioaddr);
-       pxa_set_cken(drv_data->master_info->clock_enable, 0);
+       clk_disable(ssp->clk);
 
        return 0;
 }
@@ -1597,10 +1562,11 @@ static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state)
 static int pxa2xx_spi_resume(struct platform_device *pdev)
 {
        struct driver_data *drv_data = platform_get_drvdata(pdev);
+       struct ssp_device *ssp = drv_data->ssp;
        int status = 0;
 
        /* Enable the SSP clock */
-       pxa_set_cken(drv_data->master_info->clock_enable, 1);
+       clk_disable(ssp->clk);
 
        /* Start the queue running */
        status = start_queue(drv_data);
index acc7ec7a84a16614036b88c3e2c42be0c8ee865b..3459fb26ce978c2b04a129bcf036360b04fcdca2 100644 (file)
 #define PXA2XX_CS_ASSERT (0x01)
 #define PXA2XX_CS_DEASSERT (0x02)
 
-#if defined(CONFIG_PXA25x)
-#define CLOCK_SPEED_HZ 3686400
-#define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/2/(x+1))<<8)&0x0000ff00)
-#define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
-#define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
-#elif defined(CONFIG_PXA27x)
-#define CLOCK_SPEED_HZ 13000000
-#define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
-#define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
-#define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
-#endif
-
-#define SSP1_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(1)))))
-#define SSP2_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(2)))))
-#define SSP3_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(3)))))
-
-enum pxa_ssp_type {
-       SSP_UNDEFINED = 0,
-       PXA25x_SSP,  /* pxa 210, 250, 255, 26x */
-       PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
-       PXA27x_SSP,
-};
-
 /* device.platform_data for SSP controller devices */
 struct pxa2xx_spi_master {
-       enum pxa_ssp_type ssp_type;
        u32 clock_enable;
        u16 num_chipselect;
        u8 enable_dma;