USB: drivers: use USB API functions rather than constants

This set of patches introduces calls to the following set of functions:

usb_endpoint_dir_in(epd)
usb_endpoint_dir_out(epd)
usb_endpoint_is_bulk_in(epd)
usb_endpoint_is_bulk_out(epd)
usb_endpoint_is_int_in(epd)
usb_endpoint_is_int_out(epd)
usb_endpoint_num(epd)
usb_endpoint_type(epd)
usb_endpoint_xfer_bulk(epd)
usb_endpoint_xfer_control(epd)
usb_endpoint_xfer_int(epd)
usb_endpoint_xfer_isoc(epd)

In some cases, introducing one of these functions is not possible, and it
just replaces an explicit integer value by one of the following constants:

USB_ENDPOINT_XFER_BULK
USB_ENDPOINT_XFER_CONTROL
USB_ENDPOINT_XFER_INT
USB_ENDPOINT_XFER_ISOC

An extract of the semantic patch that makes these changes is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r1@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) ==
- \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ usb_endpoint_xfer_control(epd)

@r5@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) ==
-  \(USB_DIR_IN\|0x80\))
+ usb_endpoint_dir_in(epd)

@inc@
@@

#include <linux/usb.h>

@depends on !inc && (r1||r5)@
@@

+ #include <linux/usb.h>
  #include <linux/usb/...>
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index 6ec38175a8170129a58f3954d7c438e488737a09..73c108d117b4b3da95587c5366a4498a695a8e74 100644 (file)
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -187,7 +187,7 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end,
        }
 
        /* this isn't checking for illegal values */
-       switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+       switch (usb_endpoint_type(desc)) {
        case USB_ENDPOINT_XFER_CONTROL:
                type = "Ctrl";
                if (speed == USB_SPEED_HIGH)    /* uframes per NAK */

diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
index e1710f260b4fee1ad57a3cc41429f232506cd7d5..40dee2ac0133740ee97e37932a6181247b94e22a 100644 (file)
--- a/drivers/usb/core/endpoint.c
+++ b/drivers/usb/core/endpoint.c
@@ -66,7 +66,7 @@ static ssize_t show_ep_type(struct device *dev, struct device_attribute *attr,
        struct ep_device *ep = to_ep_device(dev);
        char *type = "unknown";
 
-       switch (ep->desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+       switch (usb_endpoint_type(ep->desc)) {
        case USB_ENDPOINT_XFER_CONTROL:
                type = "Control";
                break;
@@ -94,7 +94,7 @@ static ssize_t show_ep_interval(struct device *dev,
 
        in = (ep->desc->bEndpointAddress & USB_DIR_IN);
 
-       switch (ep->desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+       switch (usb_endpoint_type(ep->desc)) {
        case USB_ENDPOINT_XFER_CONTROL:
                if (ep->udev->speed == USB_SPEED_HIGH)  /* uframes per NAK */
                        interval = ep->desc->bInterval;
@@ -131,10 +131,9 @@ static ssize_t show_ep_direction(struct device *dev,
        struct ep_device *ep = to_ep_device(dev);
        char *direction;
 
-       if ((ep->desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
-                       USB_ENDPOINT_XFER_CONTROL)
+       if (usb_endpoint_xfer_control(ep->desc))
                direction = "both";
-       else if (ep->desc->bEndpointAddress & USB_DIR_IN)
+       else if (usb_endpoint_dir_in(ep->desc))
                direction = "in";
        else
                direction = "out";

diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 319041205b57c878b38b7b60b9ad1a9f3bf47dab..5e942d94aebeb921e1b419d3fd7607406fd7cd15 100644 (file)
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -660,9 +660,9 @@ static u16 get_empty_pipenum(struct r8a66597 *r8a66597,
        u16 array[R8A66597_MAX_NUM_PIPE], i = 0, min;
 
        memset(array, 0, sizeof(array));
-       switch (ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+       switch (usb_endpoint_type(ep)) {
        case USB_ENDPOINT_XFER_BULK:
-               if (ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+               if (usb_endpoint_dir_in(ep))
                        array[i++] = 4;
                else {
                        array[i++] = 3;
@@ -670,7 +670,7 @@ static u16 get_empty_pipenum(struct r8a66597 *r8a66597,
                }
                break;
        case USB_ENDPOINT_XFER_INT:
-               if (ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) {
+               if (usb_endpoint_dir_in(ep)) {
                        array[i++] = 6;
                        array[i++] = 7;
                        array[i++] = 8;
@@ -678,7 +678,7 @@ static u16 get_empty_pipenum(struct r8a66597 *r8a66597,
                        array[i++] = 9;
                break;
        case USB_ENDPOINT_XFER_ISOC:
-               if (ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+               if (usb_endpoint_dir_in(ep))
                        array[i++] = 2;
                else
                        array[i++] = 1;
@@ -928,10 +928,9 @@ static void init_pipe_info(struct r8a66597 *r8a66597, struct urb *urb,
 
        info.pipenum = get_empty_pipenum(r8a66597, ep);
        info.address = get_urb_to_r8a66597_addr(r8a66597, urb);
-       info.epnum = ep->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+       info.epnum = usb_endpoint_num(ep);
        info.maxpacket = le16_to_cpu(ep->wMaxPacketSize);
-       info.type = get_r8a66597_type(ep->bmAttributes
-                                     & USB_ENDPOINT_XFERTYPE_MASK);
+       info.type = get_r8a66597_type(usb_endpoint_type(ep));
        info.bufnum = get_bufnum(info.pipenum);
        info.buf_bsize = get_buf_bsize(info.pipenum);
        if (info.type == R8A66597_BULK) {
@@ -941,7 +940,7 @@ static void init_pipe_info(struct r8a66597 *r8a66597, struct urb *urb,
                info.interval = get_interval(urb, ep->bInterval);
                info.timer_interval = get_timer_interval(urb, ep->bInterval);
        }
-       if (ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+       if (usb_endpoint_dir_in(ep))
                info.dir_in = 1;
        else
                info.dir_in = 0;

diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 9878c0fb3859f201345a2171459d31a55baf8831..00daa8f7759a99946fc3a902dc1e46c9a2bf55af 100644 (file)
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1507,7 +1507,7 @@ static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint,
        } else {
                dev_warn(&serial->interface->dev,
                         "unsupported endpoint type %x\n",
-                        ep_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK);
+                        usb_endpoint_type(ep_desc));
                usb_free_urb(urb);
                return NULL;
        }

diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 4becf495ca2dc7cb4a092fdc898550e83e3a2144..b01dade63cb3380304e6b668dc60e4f2b5246f48 100644 (file)
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -846,12 +846,12 @@ static int get_pipes(struct us_data *us)
        us->send_ctrl_pipe = usb_sndctrlpipe(us->pusb_dev, 0);
        us->recv_ctrl_pipe = usb_rcvctrlpipe(us->pusb_dev, 0);
        us->send_bulk_pipe = usb_sndbulkpipe(us->pusb_dev,
-               ep_out->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+               usb_endpoint_num(ep_out));
        us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev, 
-               ep_in->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+               usb_endpoint_num(ep_in));
        if (ep_int) {
                us->recv_intr_pipe = usb_rcvintpipe(us->pusb_dev,
-                       ep_int->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+                       usb_endpoint_num(ep_int));
                us->ep_bInterval = ep_int->bInterval;
        }
        return 0;