]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
bnx2x: Handling load failures
authorEilon Greenstein <eilong@broadcom.com>
Thu, 22 Jan 2009 03:37:44 +0000 (03:37 +0000)
committerDavid S. Miller <davem@davemloft.net>
Thu, 22 Jan 2009 21:45:06 +0000 (13:45 -0800)
Failures on load were not handled correctly - separate the flow to handle

different failures

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/bnx2x_main.c

index 860b9f8ddd30b048f2c8d5fba7e2867de6a60ba4..707c4bbe46a4d36d46eb6edec0a9ff963b0beae8 100644 (file)
@@ -6328,7 +6328,7 @@ static void bnx2x_set_rx_mode(struct net_device *dev);
 static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 {
        u32 load_code;
-       int i, rc;
+       int i, rc = 0;
 #ifdef BNX2X_STOP_ON_ERROR
        if (unlikely(bp->panic))
                return -EPERM;
@@ -6336,48 +6336,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 
        bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD;
 
-       /* Send LOAD_REQUEST command to MCP
-          Returns the type of LOAD command:
-          if it is the first port to be initialized
-          common blocks should be initialized, otherwise - not
-       */
-       if (!BP_NOMCP(bp)) {
-               load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ);
-               if (!load_code) {
-                       BNX2X_ERR("MCP response failure, aborting\n");
-                       return -EBUSY;
-               }
-               if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED)
-                       return -EBUSY; /* other port in diagnostic mode */
-
-       } else {
-               int port = BP_PORT(bp);
-
-               DP(NETIF_MSG_IFUP, "NO MCP load counts before us %d, %d, %d\n",
-                  load_count[0], load_count[1], load_count[2]);
-               load_count[0]++;
-               load_count[1 + port]++;
-               DP(NETIF_MSG_IFUP, "NO MCP new load counts       %d, %d, %d\n",
-                  load_count[0], load_count[1], load_count[2]);
-               if (load_count[0] == 1)
-                       load_code = FW_MSG_CODE_DRV_LOAD_COMMON;
-               else if (load_count[1 + port] == 1)
-                       load_code = FW_MSG_CODE_DRV_LOAD_PORT;
-               else
-                       load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION;
-       }
-
-       if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
-           (load_code == FW_MSG_CODE_DRV_LOAD_PORT))
-               bp->port.pmf = 1;
-       else
-               bp->port.pmf = 0;
-       DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf);
-
-       /* if we can't use MSI-X we only need one fp,
-        * so try to enable MSI-X with the requested number of fp's
-        * and fallback to inta with one fp
-        */
        if (use_inta) {
                bp->num_queues = 1;
 
@@ -6392,7 +6350,15 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
                else
                        bp->num_queues = 1;
 
-               if (bnx2x_enable_msix(bp)) {
+               DP(NETIF_MSG_IFUP,
+                  "set number of queues to %d\n", bp->num_queues);
+
+               /* if we can't use MSI-X we only need one fp,
+                * so try to enable MSI-X with the requested number of fp's
+                * and fallback to MSI or legacy INTx with one fp
+                */
+               rc = bnx2x_enable_msix(bp);
+               if (rc) {
                        /* failed to enable MSI-X */
                        bp->num_queues = 1;
                        if (use_multi)
@@ -6400,8 +6366,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
                                          " to enable MSI-X\n");
                }
        }
-       DP(NETIF_MSG_IFUP,
-          "set number of queues to %d\n", bp->num_queues);
 
        if (bnx2x_alloc_mem(bp))
                return -ENOMEM;
@@ -6410,30 +6374,85 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
                bnx2x_fp(bp, i, disable_tpa) =
                                        ((bp->flags & TPA_ENABLE_FLAG) == 0);
 
+       for_each_queue(bp, i)
+               netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi),
+                              bnx2x_poll, 128);
+
+#ifdef BNX2X_STOP_ON_ERROR
+       for_each_queue(bp, i) {
+               struct bnx2x_fastpath *fp = &bp->fp[i];
+
+               fp->poll_no_work = 0;
+               fp->poll_calls = 0;
+               fp->poll_max_calls = 0;
+               fp->poll_complete = 0;
+               fp->poll_exit = 0;
+       }
+#endif
+       bnx2x_napi_enable(bp);
+
        if (bp->flags & USING_MSIX_FLAG) {
                rc = bnx2x_req_msix_irqs(bp);
                if (rc) {
                        pci_disable_msix(bp->pdev);
-                       goto load_error;
+                       goto load_error1;
                }
+               printk(KERN_INFO PFX "%s: using MSI-X\n", bp->dev->name);
        } else {
                bnx2x_ack_int(bp);
                rc = bnx2x_req_irq(bp);
                if (rc) {
-                       BNX2X_ERR("IRQ request failed, aborting\n");
-                       goto load_error;
+                       BNX2X_ERR("IRQ request failed  rc %d, aborting\n", rc);
+                       goto load_error1;
                }
        }
 
-       for_each_queue(bp, i)
-               netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi),
-                              bnx2x_poll, 128);
+       /* Send LOAD_REQUEST command to MCP
+          Returns the type of LOAD command:
+          if it is the first port to be initialized
+          common blocks should be initialized, otherwise - not
+       */
+       if (!BP_NOMCP(bp)) {
+               load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ);
+               if (!load_code) {
+                       BNX2X_ERR("MCP response failure, aborting\n");
+                       rc = -EBUSY;
+                       goto load_error2;
+               }
+               if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED) {
+                       rc = -EBUSY; /* other port in diagnostic mode */
+                       goto load_error2;
+               }
+
+       } else {
+               int port = BP_PORT(bp);
+
+               DP(NETIF_MSG_IFUP, "NO MCP load counts before us %d, %d, %d\n",
+                  load_count[0], load_count[1], load_count[2]);
+               load_count[0]++;
+               load_count[1 + port]++;
+               DP(NETIF_MSG_IFUP, "NO MCP new load counts       %d, %d, %d\n",
+                  load_count[0], load_count[1], load_count[2]);
+               if (load_count[0] == 1)
+                       load_code = FW_MSG_CODE_DRV_LOAD_COMMON;
+               else if (load_count[1 + port] == 1)
+                       load_code = FW_MSG_CODE_DRV_LOAD_PORT;
+               else
+                       load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION;
+       }
+
+       if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
+           (load_code == FW_MSG_CODE_DRV_LOAD_PORT))
+               bp->port.pmf = 1;
+       else
+               bp->port.pmf = 0;
+       DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf);
 
        /* Initialize HW */
        rc = bnx2x_init_hw(bp, load_code);
        if (rc) {
                BNX2X_ERR("HW init failed, aborting\n");
-               goto load_int_disable;
+               goto load_error2;
        }
 
        /* Setup NIC internals and enable interrupts */
@@ -6445,7 +6464,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
                if (!load_code) {
                        BNX2X_ERR("MCP response failure, aborting\n");
                        rc = -EBUSY;
-                       goto load_rings_free;
+                       goto load_error3;
                }
        }
 
@@ -6454,7 +6473,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
        rc = bnx2x_setup_leading(bp);
        if (rc) {
                BNX2X_ERR("Setup leading failed!\n");
-               goto load_netif_stop;
+               goto load_error3;
        }
 
        if (CHIP_IS_E1H(bp))
@@ -6467,7 +6486,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
                for_each_nondefault_queue(bp, i) {
                        rc = bnx2x_setup_multi(bp, i);
                        if (rc)
-                               goto load_netif_stop;
+                               goto load_error3;
                }
 
        if (CHIP_IS_E1(bp))
@@ -6483,18 +6502,18 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
        case LOAD_NORMAL:
                /* Tx queue should be only reenabled */
                netif_wake_queue(bp->dev);
+               /* Initialize the receive filter. */
                bnx2x_set_rx_mode(bp->dev);
                break;
 
        case LOAD_OPEN:
                netif_start_queue(bp->dev);
+               /* Initialize the receive filter. */
                bnx2x_set_rx_mode(bp->dev);
-               if (bp->flags & USING_MSIX_FLAG)
-                       printk(KERN_INFO PFX "%s: using MSI-X\n",
-                              bp->dev->name);
                break;
 
        case LOAD_DIAG:
+               /* Initialize the receive filter. */
                bnx2x_set_rx_mode(bp->dev);
                bp->state = BNX2X_STATE_DIAG;
                break;
@@ -6512,20 +6531,23 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 
        return 0;
 
-load_netif_stop:
-       bnx2x_napi_disable(bp);
-load_rings_free:
+load_error3:
+       bnx2x_int_disable_sync(bp, 1);
+       if (!BP_NOMCP(bp)) {
+               bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP);
+               bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
+       }
+       bp->port.pmf = 0;
        /* Free SKBs, SGEs, TPA pool and driver internals */
        bnx2x_free_skbs(bp);
        for_each_queue(bp, i)
                bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
-load_int_disable:
-       bnx2x_int_disable_sync(bp, 1);
+load_error2:
        /* Release IRQs */
        bnx2x_free_irq(bp);
-load_error:
+load_error1:
+       bnx2x_napi_disable(bp);
        bnx2x_free_mem(bp);
-       bp->port.pmf = 0;
 
        /* TBD we really need to reset the chip
           if we want to recover from this */