#include <asm/idle.h>
#include <asm/proto.h>
#include <asm/timex.h>
+#include <asm/apic.h>
int apic_verbosity;
int apic_runs_main_timer;
static int __init apic_set_verbosity(char *str)
{
+ if (str == NULL) {
+ skip_ioapic_setup = 0;
+ ioapic_force = 1;
+ return 0;
+ }
if (strcmp("debug", str) == 0)
apic_verbosity = APIC_DEBUG;
else if (strcmp("verbose", str) == 0)
apic_verbosity = APIC_VERBOSE;
- else
+ else {
printk(KERN_WARNING "APIC Verbosity level %s not recognised"
- " use apic=verbose or apic=debug", str);
+ " use apic=verbose or apic=debug\n", str);
+ return -EINVAL;
+ }
- return 1;
+ return 0;
}
-
-__setup("apic=", apic_set_verbosity);
+early_param("apic", apic_set_verbosity);
/*
* Detect and enable local APICs on non-SMP boards.
static __init int setup_disableapic(char *str)
{
disable_apic = 1;
- return 1;
-}
+ clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
+ return 0;
+}
+early_param("disableapic", setup_disableapic);
+/* same as disableapic, for compatibility */
static __init int setup_nolapic(char *str)
{
- disable_apic = 1;
- return 1;
+ return setup_disableapic(str);
}
+early_param("nolapic", setup_nolapic);
static __init int setup_noapictimer(char *str)
{
}
__setup("apicpmtimer", setup_apicpmtimer);
-/* dummy parsing: see setup.c */
-
-__setup("disableapic", setup_disableapic);
-__setup("nolapic", setup_nolapic); /* same as disableapic, for compatibility */
-
__setup("noapictimer", setup_noapictimer);
-/* no "lapic" flag - we only use the lapic when the BIOS tells us so. */
e820_print_map(who);
}
-void __init parse_memopt(char *p, char **from)
-{
- end_user_pfn = memparse(p, from);
+static int __init parse_memopt(char *p)
+{
+ if (!p)
+ return -EINVAL;
+ end_user_pfn = memparse(p, &p);
end_user_pfn >>= PAGE_SHIFT;
+ return 0;
}
+early_param("mem", parse_memopt);
+
+static int userdef __initdata;
-void __init parse_memmapopt(char *p, char **from)
+static int __init parse_memmap_opt(char *p)
{
+ char *oldp;
unsigned long long start_at, mem_size;
- mem_size = memparse(p, from);
- p = *from;
+ if (!strcmp(p, "exactmap")) {
+#ifdef CONFIG_CRASH_DUMP
+ /* If we are doing a crash dump, we
+ * still need to know the real mem
+ * size before original memory map is
+ * reset.
+ */
+ saved_max_pfn = e820_end_of_ram();
+#endif
+ end_pfn_map = 0;
+ e820.nr_map = 0;
+ userdef = 1;
+ return 0;
+ }
+
+ oldp = p;
+ mem_size = memparse(p, &p);
+ if (p == oldp)
+ return -EINVAL;
if (*p == '@') {
- start_at = memparse(p+1, from);
+ start_at = memparse(p+1, &p);
add_memory_region(start_at, mem_size, E820_RAM);
} else if (*p == '#') {
- start_at = memparse(p+1, from);
+ start_at = memparse(p+1, &p);
add_memory_region(start_at, mem_size, E820_ACPI);
} else if (*p == '$') {
- start_at = memparse(p+1, from);
+ start_at = memparse(p+1, &p);
add_memory_region(start_at, mem_size, E820_RESERVED);
} else {
end_user_pfn = (mem_size >> PAGE_SHIFT);
}
- p = *from;
+ return *p == '\0' ? 0 : -EINVAL;
+}
+early_param("memmap", parse_memmap_opt);
+
+void finish_e820_parsing(void)
+{
+ if (userdef) {
+ printk(KERN_INFO "user-defined physical RAM map:\n");
+ e820_print_map("user");
+ }
}
unsigned long pci_mem_start = 0xaeedbabe;
static int __initdata keep_early;
-int __init setup_early_printk(char *opt)
+static int __init setup_early_printk(char *buf)
{
- char *space;
- char buf[256];
+ if (!buf)
+ return 0;
if (early_console_initialized)
- return 1;
-
- strlcpy(buf,opt,sizeof(buf));
- space = strchr(buf, ' ');
- if (space)
- *space = 0;
+ return 0;
+ early_console_initialized = 1;
- if (strstr(buf,"keep"))
+ if (!strcmp(buf,"keep"))
keep_early = 1;
if (!strncmp(buf, "serial", 6)) {
early_console = &simnow_console;
keep_early = 1;
}
- early_console_initialized = 1;
register_console(early_console);
return 0;
}
+early_param("earlyprintk", setup_early_printk);
+
void __init disable_early_printk(void)
{
if (!early_console_initialized || !early_console)
}
}
-__setup("earlyprintk=", setup_early_printk);
void __init x86_64_start_kernel(char * real_mode_data)
{
- char *s;
int i;
for (i = 0; i < 256; i++)
#ifdef CONFIG_SMP
cpu_set(0, cpu_online_map);
#endif
- s = strstr(saved_command_line, "earlyprintk=");
- if (s != NULL)
- setup_early_printk(strchr(s, '=') + 1);
-#ifdef CONFIG_NUMA
- s = strstr(saved_command_line, "numa=");
- if (s != NULL)
- numa_setup(s+5);
-#endif
- if (strstr(saved_command_line, "disableapic"))
- disable_apic = 1;
- /* You need early console to see that */
- if (__pa_symbol(&_end) >= KERNEL_TEXT_SIZE)
- panic("Kernel too big for kernel mapping\n");
-
start_kernel();
}
static int no_timer_check;
-int disable_timer_pin_1 __initdata;
+static int disable_timer_pin_1 __initdata;
int timer_over_8254 __initdata = 0;
static int __init disable_ioapic_setup(char *str)
{
skip_ioapic_setup = 1;
- return 1;
+ return 0;
}
+early_param("noapic", disable_ioapic_setup);
-static int __init enable_ioapic_setup(char *str)
+/* Actually the next is obsolete, but keep it for paranoid reasons -AK */
+static int __init disable_timer_pin_setup(char *arg)
{
- ioapic_force = 1;
- skip_ioapic_setup = 0;
+ disable_timer_pin_1 = 1;
return 1;
}
-
-__setup("noapic", disable_ioapic_setup);
-__setup("apic", enable_ioapic_setup);
+__setup("disable_timer_pin_1", disable_timer_pin_setup);
static int __init setup_disable_8254_timer(char *s)
{
rnk = (relocate_new_kernel_t) control_code_buffer;
(*rnk)(page_list, control_code_buffer, image->start, start_pgtable);
}
+
+/* crashkernel=size@addr specifies the location to reserve for
+ * a crash kernel. By reserving this memory we guarantee
+ * that linux never set's it up as a DMA target.
+ * Useful for holding code to do something appropriate
+ * after a kernel panic.
+ */
+static int __init setup_crashkernel(char *arg)
+{
+ unsigned long size, base;
+ char *p;
+ if (!arg)
+ return -EINVAL;
+ size = memparse(arg, &p);
+ if (arg == p)
+ return -EINVAL;
+ if (*p == '@') {
+ base = memparse(p+1, &p);
+ /* FIXME: Do I want a sanity check to validate the
+ * memory range? Yes you do, but it's too early for
+ * e820 -AK */
+ crashk_res.start = base;
+ crashk_res.end = base + size - 1;
+ }
+ return 0;
+}
+early_param("crashkernel", setup_crashkernel);
+
{
iommu_merge = 1;
+ if (!p)
+ return -EINVAL;
+
while (*p) {
if (!strncmp(p,"off",3))
no_iommu = 1;
if (*p == ',')
++p;
}
- return 1;
+ return 0;
}
-__setup("iommu=", iommu_setup);
+early_param("iommu", iommu_setup);
void __init pci_iommu_alloc(void)
{
int acpi_disabled;
EXPORT_SYMBOL(acpi_disabled);
-#ifdef CONFIG_ACPI
-extern int __initdata acpi_ht;
-extern acpi_interrupt_flags acpi_sci_flags;
-int __initdata acpi_force = 0;
-#endif
int acpi_numa __initdata;
}
}
-/* Check for full argument with no trailing characters */
-static int fullarg(char *p, char *arg)
+#ifdef CONFIG_PROC_VMCORE
+/* elfcorehdr= specifies the location of elf core header
+ * stored by the crashed kernel. This option will be passed
+ * by kexec loader to the capture kernel.
+ */
+static int __init setup_elfcorehdr(char *arg)
{
- int l = strlen(arg);
- return !memcmp(p, arg, l) && (p[l] == 0 || isspace(p[l]));
+ char *end;
+ if (!arg)
+ return -EINVAL;
+ elfcorehdr_addr = memparse(arg, &end);
+ return end > arg ? 0 : -EINVAL;
}
-
-static __init void parse_cmdline_early (char ** cmdline_p)
-{
- char c = ' ', *to = command_line, *from = COMMAND_LINE;
- int len = 0;
- int userdef = 0;
-
- for (;;) {
- if (c != ' ')
- goto next_char;
-
-#ifdef CONFIG_SMP
- /*
- * If the BIOS enumerates physical processors before logical,
- * maxcpus=N at enumeration-time can be used to disable HT.
- */
- else if (!memcmp(from, "maxcpus=", 8)) {
- extern unsigned int maxcpus;
-
- maxcpus = simple_strtoul(from + 8, NULL, 0);
- }
-#endif
-#ifdef CONFIG_ACPI
- /* "acpi=off" disables both ACPI table parsing and interpreter init */
- if (fullarg(from,"acpi=off"))
- disable_acpi();
-
- if (fullarg(from, "acpi=force")) {
- /* add later when we do DMI horrors: */
- acpi_force = 1;
- acpi_disabled = 0;
- }
-
- /* acpi=ht just means: do ACPI MADT parsing
- at bootup, but don't enable the full ACPI interpreter */
- if (fullarg(from, "acpi=ht")) {
- if (!acpi_force)
- disable_acpi();
- acpi_ht = 1;
- }
- else if (fullarg(from, "pci=noacpi"))
- acpi_disable_pci();
- else if (fullarg(from, "acpi=noirq"))
- acpi_noirq_set();
-
- else if (fullarg(from, "acpi_sci=edge"))
- acpi_sci_flags.trigger = 1;
- else if (fullarg(from, "acpi_sci=level"))
- acpi_sci_flags.trigger = 3;
- else if (fullarg(from, "acpi_sci=high"))
- acpi_sci_flags.polarity = 1;
- else if (fullarg(from, "acpi_sci=low"))
- acpi_sci_flags.polarity = 3;
-
- /* acpi=strict disables out-of-spec workarounds */
- else if (fullarg(from, "acpi=strict")) {
- acpi_strict = 1;
- }
- else if (fullarg(from, "acpi_skip_timer_override"))
- acpi_skip_timer_override = 1;
+early_param("elfcorehdr", setup_elfcorehdr);
#endif
- if (fullarg(from, "disable_timer_pin_1"))
- disable_timer_pin_1 = 1;
- if (fullarg(from, "enable_timer_pin_1"))
- disable_timer_pin_1 = -1;
-
- if (fullarg(from, "nolapic") || fullarg(from, "disableapic")) {
- clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
- disable_apic = 1;
- }
-
- if (fullarg(from, "noapic"))
- skip_ioapic_setup = 1;
-
- if (fullarg(from,"apic")) {
- skip_ioapic_setup = 0;
- ioapic_force = 1;
- }
-
- if (!memcmp(from, "mem=", 4))
- parse_memopt(from+4, &from);
-
- if (!memcmp(from, "memmap=", 7)) {
- /* exactmap option is for used defined memory */
- if (!memcmp(from+7, "exactmap", 8)) {
-#ifdef CONFIG_CRASH_DUMP
- /* If we are doing a crash dump, we
- * still need to know the real mem
- * size before original memory map is
- * reset.
- */
- saved_max_pfn = e820_end_of_ram();
-#endif
- from += 8+7;
- end_pfn_map = 0;
- e820.nr_map = 0;
- userdef = 1;
- }
- else {
- parse_memmapopt(from+7, &from);
- userdef = 1;
- }
- }
-
-#ifdef CONFIG_NUMA
- if (!memcmp(from, "numa=", 5))
- numa_setup(from+5);
-#endif
-
- if (!memcmp(from,"iommu=",6)) {
- iommu_setup(from+6);
- }
-
- if (fullarg(from,"oops=panic"))
- panic_on_oops = 1;
-
- if (!memcmp(from, "noexec=", 7))
- nonx_setup(from + 7);
-
-#ifdef CONFIG_KEXEC
- /* crashkernel=size@addr specifies the location to reserve for
- * a crash kernel. By reserving this memory we guarantee
- * that linux never set's it up as a DMA target.
- * Useful for holding code to do something appropriate
- * after a kernel panic.
- */
- else if (!memcmp(from, "crashkernel=", 12)) {
- unsigned long size, base;
- size = memparse(from+12, &from);
- if (*from == '@') {
- base = memparse(from+1, &from);
- /* FIXME: Do I want a sanity check
- * to validate the memory range?
- */
- crashk_res.start = base;
- crashk_res.end = base + size - 1;
- }
- }
-#endif
-
-#ifdef CONFIG_PROC_VMCORE
- /* elfcorehdr= specifies the location of elf core header
- * stored by the crashed kernel. This option will be passed
- * by kexec loader to the capture kernel.
- */
- else if(!memcmp(from, "elfcorehdr=", 11))
- elfcorehdr_addr = memparse(from+11, &from);
-#endif
-
-#ifdef CONFIG_HOTPLUG_CPU
- else if (!memcmp(from, "additional_cpus=", 16))
- setup_additional_cpus(from+16);
-#endif
-
- next_char:
- c = *(from++);
- if (!c)
- break;
- if (COMMAND_LINE_SIZE <= ++len)
- break;
- *(to++) = c;
- }
- if (userdef) {
- printk(KERN_INFO "user-defined physical RAM map:\n");
- e820_print_map("user");
- }
- *to = '\0';
- *cmdline_p = command_line;
-}
-
#ifndef CONFIG_NUMA
static void __init
contig_initmem_init(unsigned long start_pfn, unsigned long end_pfn)
early_identify_cpu(&boot_cpu_data);
- parse_cmdline_early(cmdline_p);
+ strlcpy(command_line, saved_command_line, COMMAND_LINE_SIZE);
+ *cmdline_p = command_line;
+
+ parse_early_param();
+
+ finish_e820_parsing();
/*
* partially used pages are not usable - thus
on Enable(default)
off Disable
*/
-int __init nonx_setup(char *str)
+static int __init nonx_setup(char *str)
{
+ if (!str)
+ return -EINVAL;
if (!strncmp(str, "on", 2)) {
__supported_pte_mask |= _PAGE_NX;
do_not_nx = 0;
do_not_nx = 1;
__supported_pte_mask &= ~_PAGE_NX;
}
- return 1;
+ return 0;
}
-__setup("noexec=", nonx_setup); /* parsed early actually */
+early_param("noexec", nonx_setup);
int force_personality32 = 0;
printk(KERN_ERR "CPU %u didn't die...\n", cpu);
}
-__init int setup_additional_cpus(char *s)
+static __init int setup_additional_cpus(char *s)
{
- return get_option(&s, &additional_cpus);
+ return s && get_option(&s, &additional_cpus) ? 0 : -EINVAL;
}
-__setup("additional_cpus=", setup_additional_cpus);
+early_param("additional_cpus", setup_additional_cpus);
#else /* ... !CONFIG_HOTPLUG_CPU */
}
-/* Actual parsing is done early in setup.c. */
-static int __init oops_dummy(char *s)
+static int __init oops_setup(char *s)
{
- panic_on_oops = 1;
- return 1;
+ if (!s)
+ return -EINVAL;
+ if (!strcmp(s, "panic"))
+ panic_on_oops = 1;
+ return 0;
}
-__setup("oops=", oops_dummy);
+early_param("oops", oops_setup);
static int __init kstack_setup(char *s)
{
+ if (!s)
+ return -EINVAL;
kstack_depth_to_print = simple_strtoul(s,NULL,0);
- return 1;
+ return 0;
}
-__setup("kstack=", kstack_setup);
+early_param("kstack", kstack_setup);
#ifdef CONFIG_STACK_UNWIND
static int __init call_trace_setup(char *s)
{
+ if (!s)
+ return -EINVAL;
if (strcmp(s, "old") == 0)
call_trace = -1;
else if (strcmp(s, "both") == 0)
call_trace = 1;
else if (strcmp(s, "new") == 0)
call_trace = 2;
- return 1;
+ return 0;
}
-__setup("call_trace=", call_trace_setup);
+early_param("call_trace", call_trace_setup);
#endif
}
}
-/* [numa=off] */
-__init int numa_setup(char *opt)
+static __init int numa_setup(char *opt)
{
+ if (!opt)
+ return -EINVAL;
if (!strncmp(opt,"off",3))
numa_off = 1;
#ifdef CONFIG_NUMA_EMU
if (!strncmp(opt,"hotadd=", 7))
hotadd_percent = simple_strtoul(opt+7, NULL, 10);
#endif
- return 1;
+ return 0;
}
+early_param("numa", numa_setup);
+
/*
* Setup early cpu_to_node.
*
extern int apic_verbosity;
extern int apic_runs_main_timer;
+extern int ioapic_force;
/*
* Define the default level of output to be very little
#define K8_APIC_EXT_INT_MSG_EXT 0x7
#define K8_APIC_EXT_LVT_ENTRY_THRESHOLD 0
-extern int disable_timer_pin_1;
-
-
void smp_send_timer_broadcast_ipi(void);
void switch_APIC_timer_to_ipi(void *cpumask);
void switch_ipi_to_APIC_timer(void *cpumask);
extern unsigned long e820_hole_size(unsigned long start_pfn,
unsigned long end_pfn);
-extern void __init parse_memopt(char *p, char **end);
-extern void __init parse_memmapopt(char *p, char **end);
+extern void finish_e820_parsing(void);
extern struct e820map e820;
#define swapper_pg_dir init_level4_pgt
-extern int nonx_setup(char *str);
extern void paging_init(void);
extern void clear_kernel_mapping(unsigned long addr, unsigned long size);
extern unsigned long vxtime_hz;
extern void time_init_gtod(void);
-extern int numa_setup(char *opt);
-
-extern int setup_early_printk(char *);
extern void early_printk(const char *fmt, ...) __attribute__((format(printf,1,2)));
extern void early_identify_cpu(struct cpuinfo_x86 *c);
extern unsigned long table_start, table_end;
extern int exception_trace;
-extern int using_apic_timer;
-extern int disable_apic;
extern unsigned cpu_khz;
-extern int ioapic_force;
-extern int skip_ioapic_setup;
-extern int acpi_ht;
-extern int acpi_disabled;
extern void no_iommu_init(void);
extern int force_iommu, no_iommu;
extern int reboot_force;
extern int notsc_setup(char *);
-extern int setup_additional_cpus(char *);
extern void smp_local_timer_interrupt(struct pt_regs * regs);
projects / linux-2.6-omap-h63xx.git / commitdiff