]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
ixgbe: disable flow control by default
authorJesse Brandeburg <jesse.brandeburg@intel.com>
Tue, 26 Aug 2008 11:27:10 +0000 (04:27 -0700)
committerJeff Garzik <jgarzik@redhat.com>
Wed, 3 Sep 2008 14:03:33 +0000 (10:03 -0400)
Since the adapter cannot tell what the remote end's flow control capability
is through auto-neg, we must turn off flow control by default.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
drivers/net/ixgbe/ixgbe.h
drivers/net/ixgbe/ixgbe_common.c
drivers/net/ixgbe/ixgbe_main.c

index 956914a5028d3f3d12d59b72f28d3115d7a82f10..496a91aea63ca652751807c9316a3f32e285de3f 100644 (file)
 
 /* flow control */
 #define IXGBE_DEFAULT_FCRTL            0x10000
-#define IXGBE_MIN_FCRTL                              0
+#define IXGBE_MIN_FCRTL                           0x40
 #define IXGBE_MAX_FCRTL                        0x7FF80
 #define IXGBE_DEFAULT_FCRTH            0x20000
-#define IXGBE_MIN_FCRTH                              0
+#define IXGBE_MIN_FCRTH                          0x600
 #define IXGBE_MAX_FCRTH                        0x7FFF0
-#define IXGBE_DEFAULT_FCPAUSE           0x6800  /* may be too long */
+#define IXGBE_DEFAULT_FCPAUSE           0xFFFF
 #define IXGBE_MIN_FCPAUSE                    0
 #define IXGBE_MAX_FCPAUSE               0xFFFF
 
index a9f4d0e58e1ccda08e7b92da3b8c8f4eb2352aa6..9c0d0a1964ebac9508fcdde6a1384eebe27020ca 100644 (file)
@@ -1064,6 +1064,13 @@ s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
        rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
        rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X);
 
+       /*
+        * 10 gig parts do not have a word in the EEPROM to determine the
+        * default flow control setting, so we explicitly set it to full.
+        */
+       if (hw->fc.type == ixgbe_fc_default)
+               hw->fc.type = ixgbe_fc_full;
+
        /*
         * We want to save off the original Flow Control configuration just in
         * case we get disconnected and then reconnected into a different hub
@@ -1116,6 +1123,16 @@ s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
        IXGBE_WRITE_REG(hw, IXGBE_FCTRL, frctl_reg);
        IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg);
 
+       /*
+        * Check for invalid software configuration, zeros are completely
+        * invalid for all parameters used past this point, and if we enable
+        * flow control with zero water marks, we blast flow control packets.
+        */
+       if (!hw->fc.low_water || !hw->fc.high_water || !hw->fc.pause_time) {
+               hw_dbg(hw, "Flow control structure initialized incorrectly\n");
+               return IXGBE_ERR_INVALID_LINK_SETTINGS;
+       }
+
        /*
         * We need to set up the Receive Threshold high and low water
         * marks as well as (optionally) enabling the transmission of
index b5a9b9da2fb7c8ca70e0741f6b9c1554826fc81c..cba7a38bf6bb4e7b287561bb5d25f1b8ae8dbb3a 100644 (file)
@@ -2446,8 +2446,12 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
        adapter->tx_eitr = 1;
 
        /* default flow control settings */
-       hw->fc.original_type = ixgbe_fc_full;
-       hw->fc.type = ixgbe_fc_full;
+       hw->fc.original_type = ixgbe_fc_none;
+       hw->fc.type = ixgbe_fc_none;
+       hw->fc.high_water = IXGBE_DEFAULT_FCRTH;
+       hw->fc.low_water = IXGBE_DEFAULT_FCRTL;
+       hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE;
+       hw->fc.send_xon = true;
 
        /* select 10G link by default */
        hw->mac.link_mode_select = IXGBE_AUTOC_LMS_10G_LINK_NO_AN;
@@ -3587,13 +3591,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 
        INIT_WORK(&adapter->reset_task, ixgbe_reset_task);
 
-       /* initialize default flow control settings */
-       hw->fc.original_type = ixgbe_fc_full;
-       hw->fc.type = ixgbe_fc_full;
-       hw->fc.high_water = IXGBE_DEFAULT_FCRTH;
-       hw->fc.low_water = IXGBE_DEFAULT_FCRTL;
-       hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE;
-
        err = ixgbe_init_interrupt_scheme(adapter);
        if (err)
                goto err_sw_init;