]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[PATCH] e1000: Driver version, white space, comments & other
authorMalli Chilakala <mallikarjuna.chilakala@intel.com>
Sat, 18 Jun 2005 00:46:06 +0000 (17:46 -0700)
committerJeff Garzik <jgarzik@pobox.com>
Mon, 27 Jun 2005 04:34:26 +0000 (00:34 -0400)
Driver version, white space, comments & other

Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
drivers/net/e1000/e1000_hw.c
drivers/net/e1000/e1000_main.c

index 224db3c733291c7f93071caa60fcb9163f0ccd72..045f5426ab9a68c6af41690f450839d77dca0110 100644 (file)
@@ -1198,9 +1198,9 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw)
         ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
         if(ret_val)
             return ret_val;
-        }
+    }
 
-   return E1000_SUCCESS;
+    return E1000_SUCCESS;
 }
 
 
index f680c87254ba4f00723cfa09e6f64029a7e81bbf..cb7f051a60ad6a29b914b1af36fa3090c249bbf0 100644 (file)
@@ -29,6 +29,8 @@
 #include "e1000.h"
 
 /* Change Log
+ * 6.0.58       4/20/05
+ *   o Accepted ethtool cleanup patch from Stephen Hemminger 
  * 6.0.44+     2/15/05
  *   o applied Anton's patch to resolve tx hang in hardware
  *   o Applied Andrew Mortons patch - e1000 stops working after resume
@@ -41,9 +43,9 @@ char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
 #else
 #define DRIVERNAPI "-NAPI"
 #endif
-#define DRV_VERSION "6.0.54-k2"DRIVERNAPI
+#define DRV_VERSION            "6.0.60-k2"DRIVERNAPI
 char e1000_driver_version[] = DRV_VERSION;
-char e1000_copyright[] = "Copyright (c) 1999-2004 Intel Corporation.";
+char e1000_copyright[] = "Copyright (c) 1999-2005 Intel Corporation.";
 
 /* e1000_pci_tbl - PCI Device ID Table
  *
@@ -2672,8 +2674,8 @@ e1000_clean(struct net_device *netdev, int *budget)
        *budget -= work_done;
        netdev->quota -= work_done;
        
-       /* If no Tx and no Rx work done, exit the polling mode */
        if ((!tx_cleaned && (work_done == 0)) || !netif_running(netdev)) {
+       /* If no Tx and not enough Rx work done, exit the polling mode */
                netif_rx_complete(netdev);
                e1000_irq_enable(adapter);
                return 0;
@@ -3763,12 +3765,12 @@ static int
 e1000_resume(struct pci_dev *pdev)
 {
        struct net_device *netdev = pci_get_drvdata(pdev);
-       uint32_t manc, ret, swsm;
        struct e1000_adapter *adapter = netdev_priv(netdev);
+       uint32_t manc, ret_val, swsm;
 
        pci_set_power_state(pdev, 0);
        pci_restore_state(pdev);
-       ret = pci_enable_device(pdev);
+       ret_val = pci_enable_device(pdev);
        pci_set_master(pdev);
 
        pci_enable_wake(pdev, 3, 0);