]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
iwlwifi: move scan to iwl-scan.c iwlcore
authorTomas Winkler <tomas.winkler@intel.com>
Thu, 12 Jun 2008 01:47:10 +0000 (09:47 +0800)
committerJohn W. Linville <linville@tuxdriver.com>
Sat, 14 Jun 2008 16:18:08 +0000 (12:18 -0400)
This patch moves scan code to iwl-scan.c file in iwlcore module.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/iwlwifi/Makefile
drivers/net/wireless/iwlwifi/iwl-commands.h
drivers/net/wireless/iwlwifi/iwl-core.h
drivers/net/wireless/iwlwifi/iwl-dev.h
drivers/net/wireless/iwlwifi/iwl-scan.c [new file with mode: 0644]
drivers/net/wireless/iwlwifi/iwl4965-base.c

index 184fdeec360628b278aba37e7dfa3afc875d63bc..1f52b92f08b5b20464f382173b2be110c1bbfbc8 100644 (file)
@@ -1,6 +1,7 @@
 obj-$(CONFIG_IWLCORE)  += iwlcore.o
-iwlcore-objs           := iwl-core.o iwl-eeprom.o iwl-hcmd.o iwl-power.o iwl-calib.o
-iwlcore-objs           += iwl-rx.o iwl-tx.o iwl-sta.o
+iwlcore-objs           := iwl-core.o iwl-eeprom.o iwl-hcmd.o iwl-power.o
+iwlcore-objs           += iwl-rx.o iwl-tx.o iwl-sta.o iwl-calib.o
+iwlcore-objs           += iwl-scan.o
 iwlcore-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o
 iwlcore-$(CONFIG_IWLWIFI_LEDS) += iwl-led.o
 iwlcore-$(CONFIG_IWLWIFI_RFKILL) += iwl-rfkill.o
index b58f79626e10357dd38e29180be1b229f2085f17..058e76415042339d7a8bfed0acf2c50a48aa68f2 100644 (file)
@@ -2100,7 +2100,7 @@ struct iwl4965_ct_kill_config {
  *****************************************************************************/
 
 /**
- * struct iwl4965_scan_channel - entry in REPLY_SCAN_CMD channel table
+ * struct iwl_scan_channel - entry in REPLY_SCAN_CMD channel table
  *
  * One for each channel in the scan list.
  * Each channel can independently select:
@@ -2110,7 +2110,7 @@ struct iwl4965_ct_kill_config {
  *     quiet_plcp_th, good_CRC_th)
  *
  * To avoid uCode errors, make sure the following are true (see comments
- * under struct iwl4965_scan_cmd about max_out_time and quiet_time):
+ * under struct iwl_scan_cmd about max_out_time and quiet_time):
  * 1)  If using passive_dwell (i.e. passive_dwell != 0):
  *     active_dwell <= passive_dwell (< max_out_time if max_out_time != 0)
  * 2)  quiet_time <= active_dwell
@@ -2118,7 +2118,7 @@ struct iwl4965_ct_kill_config {
  *     passive_dwell < max_out_time
  *     active_dwell < max_out_time
  */
-struct iwl4965_scan_channel {
+struct iwl_scan_channel {
        /*
         * type is defined as:
         * 0:0 1 = active, 0 = passive
@@ -2134,13 +2134,13 @@ struct iwl4965_scan_channel {
 } __attribute__ ((packed));
 
 /**
- * struct iwl4965_ssid_ie - directed scan network information element
+ * struct iwl_ssid_ie - directed scan network information element
  *
  * Up to 4 of these may appear in REPLY_SCAN_CMD, selected by "type" field
  * in struct iwl4965_scan_channel; each channel may select different ssids from
  * among the 4 entries.  SSID IEs get transmitted in reverse order of entry.
  */
-struct iwl4965_ssid_ie {
+struct iwl_ssid_ie {
        u8 id;
        u8 len;
        u8 ssid[32];
@@ -2201,9 +2201,9 @@ struct iwl4965_ssid_ie {
  * Driver must use separate scan commands for 2.4 vs. 5 GHz bands.
  *
  * To avoid uCode errors, see timing restrictions described under
- * struct iwl4965_scan_channel.
+ * struct iwl_scan_channel.
  */
-struct iwl4965_scan_cmd {
+struct iwl_scan_cmd {
        __le16 len;
        u8 reserved0;
        u8 channel_count;       /* # channels in channel list */
@@ -2227,7 +2227,7 @@ struct iwl4965_scan_cmd {
        struct iwl_tx_cmd tx_cmd;
 
        /* For directed active scans (set to all-0s otherwise) */
-       struct iwl4965_ssid_ie direct_scan[PROBE_OPTION_MAX];
+       struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX];
 
        /*
         * Probe request frame, followed by channel list.
@@ -2255,14 +2255,14 @@ struct iwl4965_scan_cmd {
 /*
  * REPLY_SCAN_CMD = 0x80 (response)
  */
-struct iwl4965_scanreq_notification {
+struct iwl_scanreq_notification {
        __le32 status;          /* 1: okay, 2: cannot fulfill request */
 } __attribute__ ((packed));
 
 /*
  * SCAN_START_NOTIFICATION = 0x82 (notification only, not a command)
  */
-struct iwl4965_scanstart_notification {
+struct iwl_scanstart_notification {
        __le32 tsf_low;
        __le32 tsf_high;
        __le32 beacon_timer;
@@ -2279,7 +2279,7 @@ struct iwl4965_scanstart_notification {
 /*
  * SCAN_RESULTS_NOTIFICATION = 0x83 (notification only, not a command)
  */
-struct iwl4965_scanresults_notification {
+struct iwl_scanresults_notification {
        u8 channel;
        u8 band;
        u8 reserved[2];
@@ -2291,7 +2291,7 @@ struct iwl4965_scanresults_notification {
 /*
  * SCAN_COMPLETE_NOTIFICATION = 0x84 (notification only, not a command)
  */
-struct iwl4965_scancomplete_notification {
+struct iwl_scancomplete_notification {
        u8 scanned_channels;
        u8 status;
        u8 reserved;
index 5bae691cc492ca46eb13987b887a907259939f37..5837577caa8b9d63d9191cd4cb52f401e86ec544 100644 (file)
@@ -243,6 +243,16 @@ int iwl_txq_check_empty(struct iwl_priv *priv, int sta_id, u8 tid, int txq_id);
  ****************************************************/
 int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force);
 
+/*******************************************************************************
+ * Scanning
+ ******************************************************************************/
+int iwl_scan_cancel(struct iwl_priv *priv);
+int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms);
+const char *iwl_escape_essid(const char *essid, u8 essid_len);
+int iwl_scan_initiate(struct iwl_priv *priv);
+void iwl_setup_rx_scan_handlers(struct iwl_priv *priv);
+void iwl_setup_scan_deferred_work(struct iwl_priv *priv);
+
 /*****************************************************
  *   S e n d i n g     H o s t     C o m m a n d s   *
  *****************************************************/
index b420f64dcb7d0edf606bcf5b95b0f540ba999834..e5869874213c2220846181e75309278a01d32143 100644 (file)
@@ -976,7 +976,7 @@ struct iwl_priv {
        int one_direct_scan;
        u8 direct_ssid_len;
        u8 direct_ssid[IW_ESSID_MAX_SIZE];
-       struct iwl4965_scan_cmd *scan;
+       struct iwl_scan_cmd *scan;
 
        /* spinlock */
        spinlock_t lock;        /* protect general shared data */
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
new file mode 100644 (file)
index 0000000..c2ed7c1
--- /dev/null
@@ -0,0 +1,896 @@
+/******************************************************************************
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Tomas Winkler <tomas.winkler@intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *****************************************************************************/
+#include <net/mac80211.h>
+#include <linux/etherdevice.h>
+
+#include "iwl-eeprom.h"
+#include "iwl-dev.h"
+#include "iwl-core.h"
+#include "iwl-sta.h"
+#include "iwl-io.h"
+#include "iwl-helpers.h"
+
+/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
+ * sending probe req.  This should be set long enough to hear probe responses
+ * from more than one AP.  */
+#define IWL_ACTIVE_DWELL_TIME_24    (20)       /* all times in msec */
+#define IWL_ACTIVE_DWELL_TIME_52    (10)
+
+/* For faster active scanning, scan will move to the next channel if fewer than
+ * PLCP_QUIET_THRESH packets are heard on this channel within
+ * ACTIVE_QUIET_TIME after sending probe request.  This shortens the dwell
+ * time if it's a quiet channel (nothing responded to our probe, and there's
+ * no other traffic).
+ * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */
+#define IWL_PLCP_QUIET_THRESH       __constant_cpu_to_le16(1)  /* packets */
+#define IWL_ACTIVE_QUIET_TIME       __constant_cpu_to_le16(5)  /* msec */
+
+/* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel.
+ * Must be set longer than active dwell time.
+ * For the most reliable scan, set > AP beacon interval (typically 100msec). */
+#define IWL_PASSIVE_DWELL_TIME_24   (20)       /* all times in msec */
+#define IWL_PASSIVE_DWELL_TIME_52   (10)
+#define IWL_PASSIVE_DWELL_BASE      (100)
+#define IWL_CHANNEL_TUNE_TIME       5
+
+
+
+static int iwl_is_empty_essid(const char *essid, int essid_len)
+{
+       /* Single white space is for Linksys APs */
+       if (essid_len == 1 && essid[0] == ' ')
+               return 1;
+
+       /* Otherwise, if the entire essid is 0, we assume it is hidden */
+       while (essid_len) {
+               essid_len--;
+               if (essid[essid_len] != '\0')
+                       return 0;
+       }
+
+       return 1;
+}
+
+
+
+const char *iwl_escape_essid(const char *essid, u8 essid_len)
+{
+       static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
+       const char *s = essid;
+       char *d = escaped;
+
+       if (iwl_is_empty_essid(essid, essid_len)) {
+               memcpy(escaped, "<hidden>", sizeof("<hidden>"));
+               return escaped;
+       }
+
+       essid_len = min(essid_len, (u8) IW_ESSID_MAX_SIZE);
+       while (essid_len--) {
+               if (*s == '\0') {
+                       *d++ = '\\';
+                       *d++ = '0';
+                       s++;
+               } else
+                       *d++ = *s++;
+       }
+       *d = '\0';
+       return escaped;
+}
+EXPORT_SYMBOL(iwl_escape_essid);
+
+/**
+ * iwl_scan_cancel - Cancel any currently executing HW scan
+ *
+ * NOTE: priv->mutex is not required before calling this function
+ */
+int iwl_scan_cancel(struct iwl_priv *priv)
+{
+       if (!test_bit(STATUS_SCAN_HW, &priv->status)) {
+               clear_bit(STATUS_SCANNING, &priv->status);
+               return 0;
+       }
+
+       if (test_bit(STATUS_SCANNING, &priv->status)) {
+               if (!test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+                       IWL_DEBUG_SCAN("Queuing scan abort.\n");
+                       set_bit(STATUS_SCAN_ABORTING, &priv->status);
+                       queue_work(priv->workqueue, &priv->abort_scan);
+
+               } else
+                       IWL_DEBUG_SCAN("Scan abort already in progress.\n");
+
+               return test_bit(STATUS_SCANNING, &priv->status);
+       }
+
+       return 0;
+}
+EXPORT_SYMBOL(iwl_scan_cancel);
+/**
+ * iwl_scan_cancel_timeout - Cancel any currently executing HW scan
+ * @ms: amount of time to wait (in milliseconds) for scan to abort
+ *
+ * NOTE: priv->mutex must be held before calling this function
+ */
+int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms)
+{
+       unsigned long now = jiffies;
+       int ret;
+
+       ret = iwl_scan_cancel(priv);
+       if (ret && ms) {
+               mutex_unlock(&priv->mutex);
+               while (!time_after(jiffies, now + msecs_to_jiffies(ms)) &&
+                               test_bit(STATUS_SCANNING, &priv->status))
+                       msleep(1);
+               mutex_lock(&priv->mutex);
+
+               return test_bit(STATUS_SCANNING, &priv->status);
+       }
+
+       return ret;
+}
+EXPORT_SYMBOL(iwl_scan_cancel_timeout);
+
+static int iwl_send_scan_abort(struct iwl_priv *priv)
+{
+       int ret = 0;
+       struct iwl_rx_packet *res;
+       struct iwl_host_cmd cmd = {
+               .id = REPLY_SCAN_ABORT_CMD,
+               .meta.flags = CMD_WANT_SKB,
+       };
+
+       /* If there isn't a scan actively going on in the hardware
+        * then we are in between scan bands and not actually
+        * actively scanning, so don't send the abort command */
+       if (!test_bit(STATUS_SCAN_HW, &priv->status)) {
+               clear_bit(STATUS_SCAN_ABORTING, &priv->status);
+               return 0;
+       }
+
+       ret = iwl_send_cmd_sync(priv, &cmd);
+       if (ret) {
+               clear_bit(STATUS_SCAN_ABORTING, &priv->status);
+               return ret;
+       }
+
+       res = (struct iwl_rx_packet *)cmd.meta.u.skb->data;
+       if (res->u.status != CAN_ABORT_STATUS) {
+               /* The scan abort will return 1 for success or
+                * 2 for "failure".  A failure condition can be
+                * due to simply not being in an active scan which
+                * can occur if we send the scan abort before we
+                * the microcode has notified us that a scan is
+                * completed. */
+               IWL_DEBUG_INFO("SCAN_ABORT returned %d.\n", res->u.status);
+               clear_bit(STATUS_SCAN_ABORTING, &priv->status);
+               clear_bit(STATUS_SCAN_HW, &priv->status);
+       }
+
+       dev_kfree_skb_any(cmd.meta.u.skb);
+
+       return ret;
+}
+
+
+/* Service response to REPLY_SCAN_CMD (0x80) */
+static void iwl_rx_reply_scan(struct iwl_priv *priv,
+                             struct iwl_rx_mem_buffer *rxb)
+{
+#ifdef CONFIG_IWLWIFI_DEBUG
+       struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+       struct iwl_scanreq_notification *notif =
+           (struct iwl_scanreq_notification *)pkt->u.raw;
+
+       IWL_DEBUG_RX("Scan request status = 0x%x\n", notif->status);
+#endif
+}
+
+/* Service SCAN_START_NOTIFICATION (0x82) */
+static void iwl_rx_scan_start_notif(struct iwl_priv *priv,
+                                   struct iwl_rx_mem_buffer *rxb)
+{
+       struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+       struct iwl_scanstart_notification *notif =
+           (struct iwl_scanstart_notification *)pkt->u.raw;
+       priv->scan_start_tsf = le32_to_cpu(notif->tsf_low);
+       IWL_DEBUG_SCAN("Scan start: "
+                      "%d [802.11%s] "
+                      "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n",
+                      notif->channel,
+                      notif->band ? "bg" : "a",
+                      notif->tsf_high,
+                      notif->tsf_low, notif->status, notif->beacon_timer);
+}
+
+/* Service SCAN_RESULTS_NOTIFICATION (0x83) */
+static void iwl_rx_scan_results_notif(struct iwl_priv *priv,
+                                     struct iwl_rx_mem_buffer *rxb)
+{
+#ifdef CONFIG_IWLWIFI_DEBUG
+       struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+       struct iwl_scanresults_notification *notif =
+           (struct iwl_scanresults_notification *)pkt->u.raw;
+
+       IWL_DEBUG_SCAN("Scan ch.res: "
+                      "%d [802.11%s] "
+                      "(TSF: 0x%08X:%08X) - %d "
+                      "elapsed=%lu usec (%dms since last)\n",
+                      notif->channel,
+                      notif->band ? "bg" : "a",
+                      le32_to_cpu(notif->tsf_high),
+                      le32_to_cpu(notif->tsf_low),
+                      le32_to_cpu(notif->statistics[0]),
+                      le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf,
+                      jiffies_to_msecs(elapsed_jiffies
+                                       (priv->last_scan_jiffies, jiffies)));
+#endif
+
+       priv->last_scan_jiffies = jiffies;
+       priv->next_scan_jiffies = 0;
+}
+
+/* Service SCAN_COMPLETE_NOTIFICATION (0x84) */
+static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
+                                      struct iwl_rx_mem_buffer *rxb)
+{
+       struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+       struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
+
+       IWL_DEBUG_SCAN("Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
+                      scan_notif->scanned_channels,
+                      scan_notif->tsf_low,
+                      scan_notif->tsf_high, scan_notif->status);
+
+       /* The HW is no longer scanning */
+       clear_bit(STATUS_SCAN_HW, &priv->status);
+
+       /* The scan completion notification came in, so kill that timer... */
+       cancel_delayed_work(&priv->scan_check);
+
+       IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
+                      (priv->scan_bands == 2) ? "2.4" : "5.2",
+                      jiffies_to_msecs(elapsed_jiffies
+                                       (priv->scan_pass_start, jiffies)));
+
+       /* Remove this scanned band from the list
+        * of pending bands to scan */
+       priv->scan_bands--;
+
+       /* If a request to abort was given, or the scan did not succeed
+        * then we reset the scan state machine and terminate,
+        * re-queuing another scan if one has been requested */
+       if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+               IWL_DEBUG_INFO("Aborted scan completed.\n");
+               clear_bit(STATUS_SCAN_ABORTING, &priv->status);
+       } else {
+               /* If there are more bands on this scan pass reschedule */
+               if (priv->scan_bands > 0)
+                       goto reschedule;
+       }
+
+       priv->last_scan_jiffies = jiffies;
+       priv->next_scan_jiffies = 0;
+       IWL_DEBUG_INFO("Setting scan to off\n");
+
+       clear_bit(STATUS_SCANNING, &priv->status);
+
+       IWL_DEBUG_INFO("Scan took %dms\n",
+               jiffies_to_msecs(elapsed_jiffies(priv->scan_start, jiffies)));
+
+       queue_work(priv->workqueue, &priv->scan_completed);
+
+       return;
+
+reschedule:
+       priv->scan_pass_start = jiffies;
+       queue_work(priv->workqueue, &priv->request_scan);
+}
+
+void iwl_setup_rx_scan_handlers(struct iwl_priv *priv)
+{
+       /* scan handlers */
+       priv->rx_handlers[REPLY_SCAN_CMD] = iwl_rx_reply_scan;
+       priv->rx_handlers[SCAN_START_NOTIFICATION] = iwl_rx_scan_start_notif;
+       priv->rx_handlers[SCAN_RESULTS_NOTIFICATION] =
+                                       iwl_rx_scan_results_notif;
+       priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] =
+                                       iwl_rx_scan_complete_notif;
+}
+EXPORT_SYMBOL(iwl_setup_rx_scan_handlers);
+
+static inline u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
+                                               enum ieee80211_band band)
+{
+       if (band == IEEE80211_BAND_5GHZ)
+               return IWL_ACTIVE_DWELL_TIME_52;
+       else
+               return IWL_ACTIVE_DWELL_TIME_24;
+}
+
+static u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
+                                         enum ieee80211_band band)
+{
+       u16 active = iwl_get_active_dwell_time(priv, band);
+       u16 passive = (band != IEEE80211_BAND_5GHZ) ?
+           IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 :
+           IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52;
+
+       if (iwl_is_associated(priv)) {
+               /* If we're associated, we clamp the maximum passive
+                * dwell time to be 98% of the beacon interval (minus
+                * 2 * channel tune time) */
+               passive = priv->beacon_int;
+               if ((passive > IWL_PASSIVE_DWELL_BASE) || !passive)
+                       passive = IWL_PASSIVE_DWELL_BASE;
+               passive = (passive * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
+       }
+
+       if (passive <= active)
+               passive = active + 1;
+
+       return passive;
+}
+
+static int iwl_get_channels_for_scan(struct iwl_priv *priv,
+                                    enum ieee80211_band band,
+                                    u8 is_active, u8 direct_mask,
+                                    struct iwl_scan_channel *scan_ch)
+{
+       const struct ieee80211_channel *channels = NULL;
+       const struct ieee80211_supported_band *sband;
+       const struct iwl_channel_info *ch_info;
+       u16 passive_dwell = 0;
+       u16 active_dwell = 0;
+       int added, i;
+
+       sband = iwl_get_hw_mode(priv, band);
+       if (!sband)
+               return 0;
+
+       channels = sband->channels;
+
+       active_dwell = iwl_get_active_dwell_time(priv, band);
+       passive_dwell = iwl_get_passive_dwell_time(priv, band);
+
+       for (i = 0, added = 0; i < sband->n_channels; i++) {
+               if (channels[i].flags & IEEE80211_CHAN_DISABLED)
+                       continue;
+
+               scan_ch->channel =
+                       ieee80211_frequency_to_channel(channels[i].center_freq);
+
+               ch_info = iwl_get_channel_info(priv, band,
+                                        scan_ch->channel);
+               if (!is_channel_valid(ch_info)) {
+                       IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n",
+                                      scan_ch->channel);
+                       continue;
+               }
+
+               if (!is_active || is_channel_passive(ch_info) ||
+                   (channels[i].flags & IEEE80211_CHAN_PASSIVE_SCAN))
+                       scan_ch->type = 0;      /* passive */
+               else
+                       scan_ch->type = 1;      /* active */
+
+               if (scan_ch->type & 1)
+                       scan_ch->type |= (direct_mask << 1);
+
+               scan_ch->active_dwell = cpu_to_le16(active_dwell);
+               scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+
+               /* Set txpower levels to defaults */
+               scan_ch->tpc.dsp_atten = 110;
+               /* scan_pwr_info->tpc.dsp_atten; */
+
+               /*scan_pwr_info->tpc.tx_gain; */
+               if (band == IEEE80211_BAND_5GHZ)
+                       scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
+               else {
+                       scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
+                       /* NOTE: if we were doing 6Mb OFDM for scans we'd use
+                        * power level:
+                        * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
+                        */
+               }
+
+               IWL_DEBUG_SCAN("Scanning %d [%s %d]\n",
+                              scan_ch->channel,
+                              (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE",
+                              (scan_ch->type & 1) ?
+                              active_dwell : passive_dwell);
+
+               scan_ch++;
+               added++;
+       }
+
+       IWL_DEBUG_SCAN("total channels to scan %d \n", added);
+       return added;
+}
+
+int iwl_scan_initiate(struct iwl_priv *priv)
+{
+       if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
+               IWL_ERROR("APs don't scan.\n");
+               return 0;
+       }
+
+       if (!iwl_is_ready_rf(priv)) {
+               IWL_DEBUG_SCAN("Aborting scan due to not ready.\n");
+               return -EIO;
+       }
+
+       if (test_bit(STATUS_SCANNING, &priv->status)) {
+               IWL_DEBUG_SCAN("Scan already in progress.\n");
+               return -EAGAIN;
+       }
+
+       if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+               IWL_DEBUG_SCAN("Scan request while abort pending.  "
+                              "Queuing.\n");
+               return -EAGAIN;
+       }
+
+       IWL_DEBUG_INFO("Starting scan...\n");
+       priv->scan_bands = 2;
+       set_bit(STATUS_SCANNING, &priv->status);
+       priv->scan_start = jiffies;
+       priv->scan_pass_start = priv->scan_start;
+
+       queue_work(priv->workqueue, &priv->request_scan);
+
+       return 0;
+}
+EXPORT_SYMBOL(iwl_scan_initiate);
+
+#define IWL_SCAN_CHECK_WATCHDOG (7 * HZ)
+
+static void iwl_bg_scan_check(struct work_struct *data)
+{
+       struct iwl_priv *priv =
+           container_of(data, struct iwl_priv, scan_check.work);
+
+       if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+               return;
+
+       mutex_lock(&priv->mutex);
+       if (test_bit(STATUS_SCANNING, &priv->status) ||
+           test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+               IWL_DEBUG(IWL_DL_SCAN, "Scan completion watchdog resetting "
+                       "adapter (%dms)\n",
+                       jiffies_to_msecs(IWL_SCAN_CHECK_WATCHDOG));
+
+               if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
+                       iwl_send_scan_abort(priv);
+       }
+       mutex_unlock(&priv->mutex);
+}
+/**
+ * iwl_supported_rate_to_ie - fill in the supported rate in IE field
+ *
+ * return : set the bit for each supported rate insert in ie
+ */
+static u16 iwl_supported_rate_to_ie(u8 *ie, u16 supported_rate,
+                                   u16 basic_rate, int *left)
+{
+       u16 ret_rates = 0, bit;
+       int i;
+       u8 *cnt = ie;
+       u8 *rates = ie + 1;
+
+       for (bit = 1, i = 0; i < IWL_RATE_COUNT; i++, bit <<= 1) {
+               if (bit & supported_rate) {
+                       ret_rates |= bit;
+                       rates[*cnt] = iwl_rates[i].ieee |
+                               ((bit & basic_rate) ? 0x80 : 0x00);
+                       (*cnt)++;
+                       (*left)--;
+                       if ((*left <= 0) ||
+                           (*cnt >= IWL_SUPPORTED_RATES_IE_LEN))
+                               break;
+               }
+       }
+
+       return ret_rates;
+}
+
+
+static void iwl_ht_cap_to_ie(const struct ieee80211_supported_band *sband,
+                       u8 *pos, int *left)
+{
+       struct ieee80211_ht_cap *ht_cap;
+
+       if (!sband || !sband->ht_info.ht_supported)
+               return;
+
+       if (*left < sizeof(struct ieee80211_ht_cap))
+               return;
+
+       *pos++ = sizeof(struct ieee80211_ht_cap);
+       ht_cap = (struct ieee80211_ht_cap *) pos;
+
+       ht_cap->cap_info = cpu_to_le16(sband->ht_info.cap);
+       memcpy(ht_cap->supp_mcs_set, sband->ht_info.supp_mcs_set, 16);
+       ht_cap->ampdu_params_info =
+               (sband->ht_info.ampdu_factor & IEEE80211_HT_CAP_AMPDU_FACTOR) |
+               ((sband->ht_info.ampdu_density << 2) &
+                       IEEE80211_HT_CAP_AMPDU_DENSITY);
+       *left -= sizeof(struct ieee80211_ht_cap);
+}
+
+/**
+ * iwl_fill_probe_req - fill in all required fields and IE for probe request
+ */
+static u16 iwl_fill_probe_req(struct iwl_priv *priv,
+                                 enum ieee80211_band band,
+                                 struct ieee80211_mgmt *frame,
+                                 int left, int is_direct)
+{
+       int len = 0;
+       u8 *pos = NULL;
+       u16 active_rates, ret_rates, cck_rates, active_rate_basic;
+       const struct ieee80211_supported_band *sband =
+                                               iwl_get_hw_mode(priv, band);
+
+       /* Make sure there is enough space for the probe request,
+        * two mandatory IEs and the data */
+       left -= 24;
+       if (left < 0)
+               return 0;
+       len += 24;
+
+       frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
+       memcpy(frame->da, iwl_bcast_addr, ETH_ALEN);
+       memcpy(frame->sa, priv->mac_addr, ETH_ALEN);
+       memcpy(frame->bssid, iwl_bcast_addr, ETH_ALEN);
+       frame->seq_ctrl = 0;
+
+       /* fill in our indirect SSID IE */
+       /* ...next IE... */
+
+       left -= 2;
+       if (left < 0)
+               return 0;
+       len += 2;
+       pos = &(frame->u.probe_req.variable[0]);
+       *pos++ = WLAN_EID_SSID;
+       *pos++ = 0;
+
+       /* fill in our direct SSID IE... */
+       if (is_direct) {
+               /* ...next IE... */
+               left -= 2 + priv->essid_len;
+               if (left < 0)
+                       return 0;
+               /* ... fill it in... */
+               *pos++ = WLAN_EID_SSID;
+               *pos++ = priv->essid_len;
+               memcpy(pos, priv->essid, priv->essid_len);
+               pos += priv->essid_len;
+               len += 2 + priv->essid_len;
+       }
+
+       /* fill in supported rate */
+       /* ...next IE... */
+       left -= 2;
+       if (left < 0)
+               return 0;
+
+       /* ... fill it in... */
+       *pos++ = WLAN_EID_SUPP_RATES;
+       *pos = 0;
+
+       /* exclude 60M rate */
+       active_rates = priv->rates_mask;
+       active_rates &= ~IWL_RATE_60M_MASK;
+
+       active_rate_basic = active_rates & IWL_BASIC_RATES_MASK;
+
+       cck_rates = IWL_CCK_RATES_MASK & active_rates;
+       ret_rates = iwl_supported_rate_to_ie(pos, cck_rates,
+                       active_rate_basic, &left);
+       active_rates &= ~ret_rates;
+
+       ret_rates = iwl_supported_rate_to_ie(pos, active_rates,
+                                active_rate_basic, &left);
+       active_rates &= ~ret_rates;
+
+       len += 2 + *pos;
+       pos += (*pos) + 1;
+       if (active_rates == 0)
+               goto fill_end;
+
+       /* fill in supported extended rate */
+       /* ...next IE... */
+       left -= 2;
+       if (left < 0)
+               return 0;
+       /* ... fill it in... */
+       *pos++ = WLAN_EID_EXT_SUPP_RATES;
+       *pos = 0;
+       iwl_supported_rate_to_ie(pos, active_rates,
+                                active_rate_basic, &left);
+       if (*pos > 0)
+               len += 2 + *pos;
+
+ fill_end:
+       /* fill in HT IE */
+       left -= 2;
+       if (left < 0)
+               return 0;
+
+       *pos++ = WLAN_EID_HT_CAPABILITY;
+       *pos = 0;
+
+       iwl_ht_cap_to_ie(sband, pos, &left);
+
+       if (*pos > 0)
+               len += 2 + *pos;
+       return (u16)len;
+}
+
+static void iwl_bg_request_scan(struct work_struct *data)
+{
+       struct iwl_priv *priv =
+           container_of(data, struct iwl_priv, request_scan);
+       struct iwl_host_cmd cmd = {
+               .id = REPLY_SCAN_CMD,
+               .len = sizeof(struct iwl_scan_cmd),
+               .meta.flags = CMD_SIZE_HUGE,
+       };
+       struct iwl_scan_cmd *scan;
+       struct ieee80211_conf *conf = NULL;
+       u16 cmd_len;
+       enum ieee80211_band band;
+       u8 direct_mask;
+       int ret = 0;
+
+       conf = ieee80211_get_hw_conf(priv->hw);
+
+       mutex_lock(&priv->mutex);
+
+       if (!iwl_is_ready(priv)) {
+               IWL_WARNING("request scan called when driver not ready.\n");
+               goto done;
+       }
+
+       /* Make sure the scan wasn't cancelled before this queued work
+        * was given the chance to run... */
+       if (!test_bit(STATUS_SCANNING, &priv->status))
+               goto done;
+
+       /* This should never be called or scheduled if there is currently
+        * a scan active in the hardware. */
+       if (test_bit(STATUS_SCAN_HW, &priv->status)) {
+               IWL_DEBUG_INFO("Multiple concurrent scan requests in parallel. "
+                              "Ignoring second request.\n");
+               ret = -EIO;
+               goto done;
+       }
+
+       if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
+               IWL_DEBUG_SCAN("Aborting scan due to device shutdown\n");
+               goto done;
+       }
+
+       if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+               IWL_DEBUG_HC("Scan request while abort pending.  Queuing.\n");
+               goto done;
+       }
+
+       if (iwl_is_rfkill(priv)) {
+               IWL_DEBUG_HC("Aborting scan due to RF Kill activation\n");
+               goto done;
+       }
+
+       if (!test_bit(STATUS_READY, &priv->status)) {
+               IWL_DEBUG_HC("Scan request while uninitialized.  Queuing.\n");
+               goto done;
+       }
+
+       if (!priv->scan_bands) {
+               IWL_DEBUG_HC("Aborting scan due to no requested bands\n");
+               goto done;
+       }
+
+       if (!priv->scan) {
+               priv->scan = kmalloc(sizeof(struct iwl_scan_cmd) +
+                                    IWL_MAX_SCAN_SIZE, GFP_KERNEL);
+               if (!priv->scan) {
+                       ret = -ENOMEM;
+                       goto done;
+               }
+       }
+       scan = priv->scan;
+       memset(scan, 0, sizeof(struct iwl_scan_cmd) + IWL_MAX_SCAN_SIZE);
+
+       scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
+       scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
+
+       if (iwl_is_associated(priv)) {
+               u16 interval = 0;
+               u32 extra;
+               u32 suspend_time = 100;
+               u32 scan_suspend_time = 100;
+               unsigned long flags;
+
+               IWL_DEBUG_INFO("Scanning while associated...\n");
+
+               spin_lock_irqsave(&priv->lock, flags);
+               interval = priv->beacon_int;
+               spin_unlock_irqrestore(&priv->lock, flags);
+
+               scan->suspend_time = 0;
+               scan->max_out_time = cpu_to_le32(200 * 1024);
+               if (!interval)
+                       interval = suspend_time;
+
+               extra = (suspend_time / interval) << 22;
+               scan_suspend_time = (extra |
+                   ((suspend_time % interval) * 1024));
+               scan->suspend_time = cpu_to_le32(scan_suspend_time);
+               IWL_DEBUG_SCAN("suspend_time 0x%X beacon interval %d\n",
+                              scan_suspend_time, interval);
+       }
+
+       /* We should add the ability for user to lock to PASSIVE ONLY */
+       if (priv->one_direct_scan) {
+               IWL_DEBUG_SCAN
+                   ("Kicking off one direct scan for '%s'\n",
+                    iwl_escape_essid(priv->direct_ssid,
+                                     priv->direct_ssid_len));
+               scan->direct_scan[0].id = WLAN_EID_SSID;
+               scan->direct_scan[0].len = priv->direct_ssid_len;
+               memcpy(scan->direct_scan[0].ssid,
+                      priv->direct_ssid, priv->direct_ssid_len);
+               direct_mask = 1;
+       } else if (!iwl_is_associated(priv) && priv->essid_len) {
+               IWL_DEBUG_SCAN
+                 ("Kicking off one direct scan for '%s' when not associated\n",
+                  iwl_escape_essid(priv->essid, priv->essid_len));
+               scan->direct_scan[0].id = WLAN_EID_SSID;
+               scan->direct_scan[0].len = priv->essid_len;
+               memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len);
+               direct_mask = 1;
+       } else {
+               IWL_DEBUG_SCAN("Kicking off one indirect scan.\n");
+               direct_mask = 0;
+       }
+
+       scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
+       scan->tx_cmd.sta_id = priv->hw_params.bcast_sta_id;
+       scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+
+
+       switch (priv->scan_bands) {
+       case 2:
+               scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
+               scan->tx_cmd.rate_n_flags =
+                               iwl4965_hw_set_rate_n_flags(IWL_RATE_1M_PLCP,
+                               RATE_MCS_ANT_B_MSK|RATE_MCS_CCK_MSK);
+
+               scan->good_CRC_th = 0;
+               band = IEEE80211_BAND_2GHZ;
+               break;
+
+       case 1:
+               scan->tx_cmd.rate_n_flags =
+                               iwl4965_hw_set_rate_n_flags(IWL_RATE_6M_PLCP,
+                               RATE_MCS_ANT_B_MSK);
+               scan->good_CRC_th = IWL_GOOD_CRC_TH;
+               band = IEEE80211_BAND_5GHZ;
+               break;
+
+       default:
+               IWL_WARNING("Invalid scan band count\n");
+               goto done;
+       }
+
+       /* We don't build a direct scan probe request; the uCode will do
+        * that based on the direct_mask added to each channel entry */
+       cmd_len = iwl_fill_probe_req(priv, band,
+                                       (struct ieee80211_mgmt *)scan->data,
+                                       IWL_MAX_SCAN_SIZE - sizeof(*scan), 0);
+
+       scan->tx_cmd.len = cpu_to_le16(cmd_len);
+       /* select Rx chains */
+
+       /* Force use of chains B and C (0x6) for scan Rx.
+        * Avoid A (0x1) because of its off-channel reception on A-band.
+        * MIMO is not used here, but value is required to make uCode happy. */
+       scan->rx_chain = RXON_RX_CHAIN_DRIVER_FORCE_MSK |
+                       cpu_to_le16((0x7 << RXON_RX_CHAIN_VALID_POS) |
+                       (0x6 << RXON_RX_CHAIN_FORCE_SEL_POS) |
+                       (0x7 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS));
+
+       if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR)
+               scan->filter_flags = RXON_FILTER_PROMISC_MSK;
+
+       if (direct_mask)
+               scan->channel_count =
+                       iwl_get_channels_for_scan(
+                               priv, band, 1, /* active */
+                               direct_mask,
+                               (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
+       else
+               scan->channel_count =
+                       iwl_get_channels_for_scan(
+                               priv, band, 0, /* passive */
+                               direct_mask,
+                               (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
+
+       scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK |
+                              RXON_FILTER_BCON_AWARE_MSK);
+       cmd.len += le16_to_cpu(scan->tx_cmd.len) +
+           scan->channel_count * sizeof(struct iwl_scan_channel);
+       cmd.data = scan;
+       scan->len = cpu_to_le16(cmd.len);
+
+       set_bit(STATUS_SCAN_HW, &priv->status);
+       ret = iwl_send_cmd_sync(priv, &cmd);
+       if (ret)
+               goto done;
+
+       queue_delayed_work(priv->workqueue, &priv->scan_check,
+                          IWL_SCAN_CHECK_WATCHDOG);
+
+       mutex_unlock(&priv->mutex);
+       return;
+
+ done:
+       /* inform mac80211 scan aborted */
+       queue_work(priv->workqueue, &priv->scan_completed);
+       mutex_unlock(&priv->mutex);
+}
+
+static void iwl_bg_abort_scan(struct work_struct *work)
+{
+       struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan);
+
+       if (!iwl_is_ready(priv))
+               return;
+
+       mutex_lock(&priv->mutex);
+
+       set_bit(STATUS_SCAN_ABORTING, &priv->status);
+       iwl_send_scan_abort(priv);
+
+       mutex_unlock(&priv->mutex);
+}
+
+void iwl_setup_scan_deferred_work(struct iwl_priv *priv)
+{
+       /*  FIXME: move here when resolved PENDING
+        *  INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed); */
+       INIT_WORK(&priv->request_scan, iwl_bg_request_scan);
+       INIT_WORK(&priv->abort_scan, iwl_bg_abort_scan);
+       INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check);
+}
+EXPORT_SYMBOL(iwl_setup_scan_deferred_work);
+
index af448197cc05fc4708bdca32c6eb6981b1aeca4a..4183bd5ebe324d7f08f5430c528569eb35d6b0bc 100644 (file)
@@ -87,46 +87,6 @@ MODULE_VERSION(DRV_VERSION);
 MODULE_AUTHOR(DRV_COPYRIGHT);
 MODULE_LICENSE("GPL");
 
-static int iwl4965_is_empty_essid(const char *essid, int essid_len)
-{
-       /* Single white space is for Linksys APs */
-       if (essid_len == 1 && essid[0] == ' ')
-               return 1;
-
-       /* Otherwise, if the entire essid is 0, we assume it is hidden */
-       while (essid_len) {
-               essid_len--;
-               if (essid[essid_len] != '\0')
-                       return 0;
-       }
-
-       return 1;
-}
-
-static const char *iwl4965_escape_essid(const char *essid, u8 essid_len)
-{
-       static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
-       const char *s = essid;
-       char *d = escaped;
-
-       if (iwl4965_is_empty_essid(essid, essid_len)) {
-               memcpy(escaped, "<hidden>", sizeof("<hidden>"));
-               return escaped;
-       }
-
-       essid_len = min(essid_len, (u8) IW_ESSID_MAX_SIZE);
-       while (essid_len--) {
-               if (*s == '\0') {
-                       *d++ = '\\';
-                       *d++ = '0';
-                       s++;
-               } else
-                       *d++ = *s++;
-       }
-       *d = '\0';
-       return escaped;
-}
-
 /*************** STATION TABLE MANAGEMENT ****
  * mac80211 should be examined to determine if sta_info is duplicating
  * the functionality provided here
@@ -419,47 +379,6 @@ static int iwl4965_send_bt_config(struct iwl_priv *priv)
                                sizeof(struct iwl4965_bt_cmd), &bt_cmd);
 }
 
-static int iwl4965_send_scan_abort(struct iwl_priv *priv)
-{
-       int ret = 0;
-       struct iwl_rx_packet *res;
-       struct iwl_host_cmd cmd = {
-               .id = REPLY_SCAN_ABORT_CMD,
-               .meta.flags = CMD_WANT_SKB,
-       };
-
-       /* If there isn't a scan actively going on in the hardware
-        * then we are in between scan bands and not actually
-        * actively scanning, so don't send the abort command */
-       if (!test_bit(STATUS_SCAN_HW, &priv->status)) {
-               clear_bit(STATUS_SCAN_ABORTING, &priv->status);
-               return 0;
-       }
-
-       ret = iwl_send_cmd_sync(priv, &cmd);
-       if (ret) {
-               clear_bit(STATUS_SCAN_ABORTING, &priv->status);
-               return ret;
-       }
-
-       res = (struct iwl_rx_packet *)cmd.meta.u.skb->data;
-       if (res->u.status != CAN_ABORT_STATUS) {
-               /* The scan abort will return 1 for success or
-                * 2 for "failure".  A failure condition can be
-                * due to simply not being in an active scan which
-                * can occur if we send the scan abort before we
-                * the microcode has notified us that a scan is
-                * completed. */
-               IWL_DEBUG_INFO("SCAN_ABORT returned %d.\n", res->u.status);
-               clear_bit(STATUS_SCAN_ABORTING, &priv->status);
-               clear_bit(STATUS_SCAN_HW, &priv->status);
-       }
-
-       dev_kfree_skb_any(cmd.meta.u.skb);
-
-       return ret;
-}
-
 /*
  * CARD_STATE_CMD
  *
@@ -605,35 +524,6 @@ static int iwl4965_send_beacon_cmd(struct iwl_priv *priv)
  *
  ******************************************************************************/
 
-/**
- * iwl4965_supported_rate_to_ie - fill in the supported rate in IE field
- *
- * return : set the bit for each supported rate insert in ie
- */
-static u16 iwl4965_supported_rate_to_ie(u8 *ie, u16 supported_rate,
-                                   u16 basic_rate, int *left)
-{
-       u16 ret_rates = 0, bit;
-       int i;
-       u8 *cnt = ie;
-       u8 *rates = ie + 1;
-
-       for (bit = 1, i = 0; i < IWL_RATE_COUNT; i++, bit <<= 1) {
-               if (bit & supported_rate) {
-                       ret_rates |= bit;
-                       rates[*cnt] = iwl_rates[i].ieee |
-                               ((bit & basic_rate) ? 0x80 : 0x00);
-                       (*cnt)++;
-                       (*left)--;
-                       if ((*left <= 0) ||
-                           (*cnt >= IWL_SUPPORTED_RATES_IE_LEN))
-                               break;
-               }
-       }
-
-       return ret_rates;
-}
-
 static void iwl4965_ht_conf(struct iwl_priv *priv,
                            struct ieee80211_bss_conf *bss_conf)
 {
@@ -686,140 +576,6 @@ static void iwl4965_ht_conf(struct iwl_priv *priv,
        IWL_DEBUG_MAC80211("leave\n");
 }
 
-static void iwl_ht_cap_to_ie(const struct ieee80211_supported_band *sband,
-                       u8 *pos, int *left)
-{
-       struct ieee80211_ht_cap *ht_cap;
-
-       if (!sband || !sband->ht_info.ht_supported)
-               return;
-
-       if (*left < sizeof(struct ieee80211_ht_cap))
-               return;
-
-       *pos++ = sizeof(struct ieee80211_ht_cap);
-       ht_cap = (struct ieee80211_ht_cap *) pos;
-
-       ht_cap->cap_info = cpu_to_le16(sband->ht_info.cap);
-       memcpy(ht_cap->supp_mcs_set, sband->ht_info.supp_mcs_set, 16);
-       ht_cap->ampdu_params_info =
-               (sband->ht_info.ampdu_factor & IEEE80211_HT_CAP_AMPDU_FACTOR) |
-               ((sband->ht_info.ampdu_density << 2) &
-                       IEEE80211_HT_CAP_AMPDU_DENSITY);
-       *left -= sizeof(struct ieee80211_ht_cap);
-}
-
-/**
- * iwl4965_fill_probe_req - fill in all required fields and IE for probe request
- */
-static u16 iwl4965_fill_probe_req(struct iwl_priv *priv,
-                                 enum ieee80211_band band,
-                                 struct ieee80211_mgmt *frame,
-                                 int left, int is_direct)
-{
-       int len = 0;
-       u8 *pos = NULL;
-       u16 active_rates, ret_rates, cck_rates, active_rate_basic;
-       const struct ieee80211_supported_band *sband =
-                                               iwl_get_hw_mode(priv, band);
-
-       /* Make sure there is enough space for the probe request,
-        * two mandatory IEs and the data */
-       left -= 24;
-       if (left < 0)
-               return 0;
-       len += 24;
-
-       frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
-       memcpy(frame->da, iwl_bcast_addr, ETH_ALEN);
-       memcpy(frame->sa, priv->mac_addr, ETH_ALEN);
-       memcpy(frame->bssid, iwl_bcast_addr, ETH_ALEN);
-       frame->seq_ctrl = 0;
-
-       /* fill in our indirect SSID IE */
-       /* ...next IE... */
-
-       left -= 2;
-       if (left < 0)
-               return 0;
-       len += 2;
-       pos = &(frame->u.probe_req.variable[0]);
-       *pos++ = WLAN_EID_SSID;
-       *pos++ = 0;
-
-       /* fill in our direct SSID IE... */
-       if (is_direct) {
-               /* ...next IE... */
-               left -= 2 + priv->essid_len;
-               if (left < 0)
-                       return 0;
-               /* ... fill it in... */
-               *pos++ = WLAN_EID_SSID;
-               *pos++ = priv->essid_len;
-               memcpy(pos, priv->essid, priv->essid_len);
-               pos += priv->essid_len;
-               len += 2 + priv->essid_len;
-       }
-
-       /* fill in supported rate */
-       /* ...next IE... */
-       left -= 2;
-       if (left < 0)
-               return 0;
-
-       /* ... fill it in... */
-       *pos++ = WLAN_EID_SUPP_RATES;
-       *pos = 0;
-
-       /* exclude 60M rate */
-       active_rates = priv->rates_mask;
-       active_rates &= ~IWL_RATE_60M_MASK;
-
-       active_rate_basic = active_rates & IWL_BASIC_RATES_MASK;
-
-       cck_rates = IWL_CCK_RATES_MASK & active_rates;
-       ret_rates = iwl4965_supported_rate_to_ie(pos, cck_rates,
-                       active_rate_basic, &left);
-       active_rates &= ~ret_rates;
-
-       ret_rates = iwl4965_supported_rate_to_ie(pos, active_rates,
-                                active_rate_basic, &left);
-       active_rates &= ~ret_rates;
-
-       len += 2 + *pos;
-       pos += (*pos) + 1;
-       if (active_rates == 0)
-               goto fill_end;
-
-       /* fill in supported extended rate */
-       /* ...next IE... */
-       left -= 2;
-       if (left < 0)
-               return 0;
-       /* ... fill it in... */
-       *pos++ = WLAN_EID_EXT_SUPP_RATES;
-       *pos = 0;
-       iwl4965_supported_rate_to_ie(pos, active_rates,
-                                active_rate_basic, &left);
-       if (*pos > 0)
-               len += 2 + *pos;
-
- fill_end:
-       /* fill in HT IE */
-       left -= 2;
-       if (left < 0)
-               return 0;
-
-       *pos++ = WLAN_EID_HT_CAPABILITY;
-       *pos = 0;
-
-       iwl_ht_cap_to_ie(sband, pos, &left);
-
-       if (*pos > 0)
-               len += 2 + *pos;
-       return (u16)len;
-}
-
 /*
  * QoS  support
 */
@@ -897,60 +653,6 @@ int iwl4965_is_network_packet(struct iwl_priv *priv, struct ieee80211_hdr *heade
        return 1;
 }
 
-
-
-/**
- * iwl4965_scan_cancel - Cancel any currently executing HW scan
- *
- * NOTE: priv->mutex is not required before calling this function
- */
-static int iwl4965_scan_cancel(struct iwl_priv *priv)
-{
-       if (!test_bit(STATUS_SCAN_HW, &priv->status)) {
-               clear_bit(STATUS_SCANNING, &priv->status);
-               return 0;
-       }
-
-       if (test_bit(STATUS_SCANNING, &priv->status)) {
-               if (!test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
-                       IWL_DEBUG_SCAN("Queuing scan abort.\n");
-                       set_bit(STATUS_SCAN_ABORTING, &priv->status);
-                       queue_work(priv->workqueue, &priv->abort_scan);
-
-               } else
-                       IWL_DEBUG_SCAN("Scan abort already in progress.\n");
-
-               return test_bit(STATUS_SCANNING, &priv->status);
-       }
-
-       return 0;
-}
-
-/**
- * iwl4965_scan_cancel_timeout - Cancel any currently executing HW scan
- * @ms: amount of time to wait (in milliseconds) for scan to abort
- *
- * NOTE: priv->mutex must be held before calling this function
- */
-static int iwl4965_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms)
-{
-       unsigned long now = jiffies;
-       int ret;
-
-       ret = iwl4965_scan_cancel(priv);
-       if (ret && ms) {
-               mutex_unlock(&priv->mutex);
-               while (!time_after(jiffies, now + msecs_to_jiffies(ms)) &&
-                               test_bit(STATUS_SCANNING, &priv->status))
-                       msleep(1);
-               mutex_lock(&priv->mutex);
-
-               return test_bit(STATUS_SCANNING, &priv->status);
-       }
-
-       return ret;
-}
-
 static void iwl4965_sequence_reset(struct iwl_priv *priv)
 {
        /* Reset ieee stats */
@@ -962,7 +664,7 @@ static void iwl4965_sequence_reset(struct iwl_priv *priv)
        priv->last_frag_num = -1;
        priv->last_packet_time = 0;
 
-       iwl4965_scan_cancel(priv);
+       iwl_scan_cancel(priv);
 }
 
 #define MAX_UCODE_BEACON_INTERVAL      4096
@@ -1037,41 +739,6 @@ static void iwl4965_setup_rxon_timing(struct iwl_priv *priv)
                le16_to_cpu(priv->rxon_timing.atim_window));
 }
 
-static int iwl4965_scan_initiate(struct iwl_priv *priv)
-{
-       if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
-               IWL_ERROR("APs don't scan.\n");
-               return 0;
-       }
-
-       if (!iwl_is_ready_rf(priv)) {
-               IWL_DEBUG_SCAN("Aborting scan due to not ready.\n");
-               return -EIO;
-       }
-
-       if (test_bit(STATUS_SCANNING, &priv->status)) {
-               IWL_DEBUG_SCAN("Scan already in progress.\n");
-               return -EAGAIN;
-       }
-
-       if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
-               IWL_DEBUG_SCAN("Scan request while abort pending.  "
-                              "Queuing.\n");
-               return -EAGAIN;
-       }
-
-       IWL_DEBUG_INFO("Starting scan...\n");
-       priv->scan_bands = 2;
-       set_bit(STATUS_SCANNING, &priv->status);
-       priv->scan_start = jiffies;
-       priv->scan_pass_start = priv->scan_start;
-
-       queue_work(priv->workqueue, &priv->request_scan);
-
-       return 0;
-}
-
-
 static void iwl_set_flags_for_band(struct iwl_priv *priv,
                                   enum ieee80211_band band)
 {
@@ -1191,7 +858,7 @@ static int iwl4965_set_mode(struct iwl_priv *priv, int mode)
                return -EAGAIN;
 
        cancel_delayed_work(&priv->scan_check);
-       if (iwl4965_scan_cancel_timeout(priv, 100)) {
+       if (iwl_scan_cancel_timeout(priv, 100)) {
                IWL_WARNING("Aborted scan still in progress after 100ms\n");
                IWL_DEBUG_MAC80211("leaving - scan abort failed.\n");
                return -EAGAIN;
@@ -1260,7 +927,7 @@ int iwl4965_radio_kill_sw(struct iwl_priv *priv, int disable_radio)
                          disable_radio ? "OFF" : "ON");
 
        if (disable_radio) {
-               iwl4965_scan_cancel(priv);
+               iwl_scan_cancel(priv);
                /* FIXME: This is a workaround for AP */
                if (priv->iw_mode != IEEE80211_IF_TYPE_AP) {
                        spin_lock_irqsave(&priv->lock, flags);
@@ -1680,118 +1347,6 @@ static void iwl4965_rx_beacon_notif(struct iwl_priv *priv,
                queue_work(priv->workqueue, &priv->beacon_update);
 }
 
-/* Service response to REPLY_SCAN_CMD (0x80) */
-static void iwl4965_rx_reply_scan(struct iwl_priv *priv,
-                             struct iwl_rx_mem_buffer *rxb)
-{
-#ifdef CONFIG_IWLWIFI_DEBUG
-       struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
-       struct iwl4965_scanreq_notification *notif =
-           (struct iwl4965_scanreq_notification *)pkt->u.raw;
-
-       IWL_DEBUG_RX("Scan request status = 0x%x\n", notif->status);
-#endif
-}
-
-/* Service SCAN_START_NOTIFICATION (0x82) */
-static void iwl4965_rx_scan_start_notif(struct iwl_priv *priv,
-                                   struct iwl_rx_mem_buffer *rxb)
-{
-       struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
-       struct iwl4965_scanstart_notification *notif =
-           (struct iwl4965_scanstart_notification *)pkt->u.raw;
-       priv->scan_start_tsf = le32_to_cpu(notif->tsf_low);
-       IWL_DEBUG_SCAN("Scan start: "
-                      "%d [802.11%s] "
-                      "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n",
-                      notif->channel,
-                      notif->band ? "bg" : "a",
-                      notif->tsf_high,
-                      notif->tsf_low, notif->status, notif->beacon_timer);
-}
-
-/* Service SCAN_RESULTS_NOTIFICATION (0x83) */
-static void iwl4965_rx_scan_results_notif(struct iwl_priv *priv,
-                                     struct iwl_rx_mem_buffer *rxb)
-{
-       struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
-       struct iwl4965_scanresults_notification *notif =
-           (struct iwl4965_scanresults_notification *)pkt->u.raw;
-
-       IWL_DEBUG_SCAN("Scan ch.res: "
-                      "%d [802.11%s] "
-                      "(TSF: 0x%08X:%08X) - %d "
-                      "elapsed=%lu usec (%dms since last)\n",
-                      notif->channel,
-                      notif->band ? "bg" : "a",
-                      le32_to_cpu(notif->tsf_high),
-                      le32_to_cpu(notif->tsf_low),
-                      le32_to_cpu(notif->statistics[0]),
-                      le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf,
-                      jiffies_to_msecs(elapsed_jiffies
-                                       (priv->last_scan_jiffies, jiffies)));
-
-       priv->last_scan_jiffies = jiffies;
-       priv->next_scan_jiffies = 0;
-}
-
-/* Service SCAN_COMPLETE_NOTIFICATION (0x84) */
-static void iwl4965_rx_scan_complete_notif(struct iwl_priv *priv,
-                                      struct iwl_rx_mem_buffer *rxb)
-{
-       struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
-       struct iwl4965_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
-
-       IWL_DEBUG_SCAN("Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
-                      scan_notif->scanned_channels,
-                      scan_notif->tsf_low,
-                      scan_notif->tsf_high, scan_notif->status);
-
-       /* The HW is no longer scanning */
-       clear_bit(STATUS_SCAN_HW, &priv->status);
-
-       /* The scan completion notification came in, so kill that timer... */
-       cancel_delayed_work(&priv->scan_check);
-
-       IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
-                      (priv->scan_bands == 2) ? "2.4" : "5.2",
-                      jiffies_to_msecs(elapsed_jiffies
-                                       (priv->scan_pass_start, jiffies)));
-
-       /* Remove this scanned band from the list
-        * of pending bands to scan */
-       priv->scan_bands--;
-
-       /* If a request to abort was given, or the scan did not succeed
-        * then we reset the scan state machine and terminate,
-        * re-queuing another scan if one has been requested */
-       if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
-               IWL_DEBUG_INFO("Aborted scan completed.\n");
-               clear_bit(STATUS_SCAN_ABORTING, &priv->status);
-       } else {
-               /* If there are more bands on this scan pass reschedule */
-               if (priv->scan_bands > 0)
-                       goto reschedule;
-       }
-
-       priv->last_scan_jiffies = jiffies;
-       priv->next_scan_jiffies = 0;
-       IWL_DEBUG_INFO("Setting scan to off\n");
-
-       clear_bit(STATUS_SCANNING, &priv->status);
-
-       IWL_DEBUG_INFO("Scan took %dms\n",
-               jiffies_to_msecs(elapsed_jiffies(priv->scan_start, jiffies)));
-
-       queue_work(priv->workqueue, &priv->scan_completed);
-
-       return;
-
-reschedule:
-       priv->scan_pass_start = jiffies;
-       queue_work(priv->workqueue, &priv->request_scan);
-}
-
 /* Handle notification from uCode that card's power state is changing
  * due to software, hardware, or critical temperature RFKILL */
 static void iwl4965_rx_card_state_notif(struct iwl_priv *priv,
@@ -1852,7 +1407,7 @@ static void iwl4965_rx_card_state_notif(struct iwl_priv *priv,
                clear_bit(STATUS_RF_KILL_SW, &priv->status);
 
        if (!(flags & RXON_CARD_DISABLED))
-               iwl4965_scan_cancel(priv);
+               iwl_scan_cancel(priv);
 
        if ((test_bit(STATUS_RF_KILL_HW, &status) !=
             test_bit(STATUS_RF_KILL_HW, &priv->status)) ||
@@ -1902,13 +1457,9 @@ static void iwl4965_setup_rx_handlers(struct iwl_priv *priv)
         */
        priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl4965_hw_rx_statistics;
        priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl4965_hw_rx_statistics;
-       /* scan handlers */
-       priv->rx_handlers[REPLY_SCAN_CMD] = iwl4965_rx_reply_scan;
-       priv->rx_handlers[SCAN_START_NOTIFICATION] = iwl4965_rx_scan_start_notif;
-       priv->rx_handlers[SCAN_RESULTS_NOTIFICATION] =
-           iwl4965_rx_scan_results_notif;
-       priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] =
-           iwl4965_rx_scan_complete_notif;
+
+       iwl_setup_rx_scan_handlers(priv);
+
        /* status change handler */
        priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl4965_rx_card_state_notif;
 
@@ -2456,138 +2007,6 @@ static irqreturn_t iwl4965_isr(int irq, void *data)
        return IRQ_NONE;
 }
 
-/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
- * sending probe req.  This should be set long enough to hear probe responses
- * from more than one AP.  */
-#define IWL_ACTIVE_DWELL_TIME_24    (20)       /* all times in msec */
-#define IWL_ACTIVE_DWELL_TIME_52    (10)
-
-/* For faster active scanning, scan will move to the next channel if fewer than
- * PLCP_QUIET_THRESH packets are heard on this channel within
- * ACTIVE_QUIET_TIME after sending probe request.  This shortens the dwell
- * time if it's a quiet channel (nothing responded to our probe, and there's
- * no other traffic).
- * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */
-#define IWL_PLCP_QUIET_THRESH       __constant_cpu_to_le16(1)  /* packets */
-#define IWL_ACTIVE_QUIET_TIME       __constant_cpu_to_le16(5)  /* msec */
-
-/* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel.
- * Must be set longer than active dwell time.
- * For the most reliable scan, set > AP beacon interval (typically 100msec). */
-#define IWL_PASSIVE_DWELL_TIME_24   (20)       /* all times in msec */
-#define IWL_PASSIVE_DWELL_TIME_52   (10)
-#define IWL_PASSIVE_DWELL_BASE      (100)
-#define IWL_CHANNEL_TUNE_TIME       5
-
-static inline u16 iwl4965_get_active_dwell_time(struct iwl_priv *priv,
-                                               enum ieee80211_band band)
-{
-       if (band == IEEE80211_BAND_5GHZ)
-               return IWL_ACTIVE_DWELL_TIME_52;
-       else
-               return IWL_ACTIVE_DWELL_TIME_24;
-}
-
-static u16 iwl4965_get_passive_dwell_time(struct iwl_priv *priv,
-                                         enum ieee80211_band band)
-{
-       u16 active = iwl4965_get_active_dwell_time(priv, band);
-       u16 passive = (band != IEEE80211_BAND_5GHZ) ?
-           IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 :
-           IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52;
-
-       if (iwl_is_associated(priv)) {
-               /* If we're associated, we clamp the maximum passive
-                * dwell time to be 98% of the beacon interval (minus
-                * 2 * channel tune time) */
-               passive = priv->beacon_int;
-               if ((passive > IWL_PASSIVE_DWELL_BASE) || !passive)
-                       passive = IWL_PASSIVE_DWELL_BASE;
-               passive = (passive * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
-       }
-
-       if (passive <= active)
-               passive = active + 1;
-
-       return passive;
-}
-
-static int iwl4965_get_channels_for_scan(struct iwl_priv *priv,
-                                        enum ieee80211_band band,
-                                    u8 is_active, u8 direct_mask,
-                                    struct iwl4965_scan_channel *scan_ch)
-{
-       const struct ieee80211_channel *channels = NULL;
-       const struct ieee80211_supported_band *sband;
-       const struct iwl_channel_info *ch_info;
-       u16 passive_dwell = 0;
-       u16 active_dwell = 0;
-       int added, i;
-
-       sband = iwl_get_hw_mode(priv, band);
-       if (!sband)
-               return 0;
-
-       channels = sband->channels;
-
-       active_dwell = iwl4965_get_active_dwell_time(priv, band);
-       passive_dwell = iwl4965_get_passive_dwell_time(priv, band);
-
-       for (i = 0, added = 0; i < sband->n_channels; i++) {
-               if (channels[i].flags & IEEE80211_CHAN_DISABLED)
-                       continue;
-
-               scan_ch->channel = ieee80211_frequency_to_channel(channels[i].center_freq);
-
-               ch_info = iwl_get_channel_info(priv, band,
-                                        scan_ch->channel);
-               if (!is_channel_valid(ch_info)) {
-                       IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n",
-                                      scan_ch->channel);
-                       continue;
-               }
-
-               if (!is_active || is_channel_passive(ch_info) ||
-                   (channels[i].flags & IEEE80211_CHAN_PASSIVE_SCAN))
-                       scan_ch->type = 0;      /* passive */
-               else
-                       scan_ch->type = 1;      /* active */
-
-               if (scan_ch->type & 1)
-                       scan_ch->type |= (direct_mask << 1);
-
-               scan_ch->active_dwell = cpu_to_le16(active_dwell);
-               scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
-
-               /* Set txpower levels to defaults */
-               scan_ch->tpc.dsp_atten = 110;
-               /* scan_pwr_info->tpc.dsp_atten; */
-
-               /*scan_pwr_info->tpc.tx_gain; */
-               if (band == IEEE80211_BAND_5GHZ)
-                       scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
-               else {
-                       scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
-                       /* NOTE: if we were doing 6Mb OFDM for scans we'd use
-                        * power level:
-                        * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
-                        */
-               }
-
-               IWL_DEBUG_SCAN("Scanning %d [%s %d]\n",
-                              scan_ch->channel,
-                              (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE",
-                              (scan_ch->type & 1) ?
-                              active_dwell : passive_dwell);
-
-               scan_ch++;
-               added++;
-       }
-
-       IWL_DEBUG_SCAN("total channels to scan %d \n", added);
-       return added;
-}
-
 /******************************************************************************
  *
  * uCode download functions
@@ -3200,243 +2619,6 @@ static void iwl4965_bg_set_monitor(struct work_struct *work)
        mutex_unlock(&priv->mutex);
 }
 
-#define IWL_SCAN_CHECK_WATCHDOG (7 * HZ)
-
-static void iwl4965_bg_scan_check(struct work_struct *data)
-{
-       struct iwl_priv *priv =
-           container_of(data, struct iwl_priv, scan_check.work);
-
-       if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-               return;
-
-       mutex_lock(&priv->mutex);
-       if (test_bit(STATUS_SCANNING, &priv->status) ||
-           test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
-               IWL_DEBUG(IWL_DL_SCAN, "Scan completion watchdog resetting "
-                       "adapter (%dms)\n",
-                       jiffies_to_msecs(IWL_SCAN_CHECK_WATCHDOG));
-
-               if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
-                       iwl4965_send_scan_abort(priv);
-       }
-       mutex_unlock(&priv->mutex);
-}
-
-static void iwl4965_bg_request_scan(struct work_struct *data)
-{
-       struct iwl_priv *priv =
-           container_of(data, struct iwl_priv, request_scan);
-       struct iwl_host_cmd cmd = {
-               .id = REPLY_SCAN_CMD,
-               .len = sizeof(struct iwl4965_scan_cmd),
-               .meta.flags = CMD_SIZE_HUGE,
-       };
-       struct iwl4965_scan_cmd *scan;
-       struct ieee80211_conf *conf = NULL;
-       u16 cmd_len;
-       enum ieee80211_band band;
-       u8 direct_mask;
-       int ret = 0;
-
-       conf = ieee80211_get_hw_conf(priv->hw);
-
-       mutex_lock(&priv->mutex);
-
-       if (!iwl_is_ready(priv)) {
-               IWL_WARNING("request scan called when driver not ready.\n");
-               goto done;
-       }
-
-       /* Make sure the scan wasn't cancelled before this queued work
-        * was given the chance to run... */
-       if (!test_bit(STATUS_SCANNING, &priv->status))
-               goto done;
-
-       /* This should never be called or scheduled if there is currently
-        * a scan active in the hardware. */
-       if (test_bit(STATUS_SCAN_HW, &priv->status)) {
-               IWL_DEBUG_INFO("Multiple concurrent scan requests in parallel. "
-                              "Ignoring second request.\n");
-               ret = -EIO;
-               goto done;
-       }
-
-       if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
-               IWL_DEBUG_SCAN("Aborting scan due to device shutdown\n");
-               goto done;
-       }
-
-       if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
-               IWL_DEBUG_HC("Scan request while abort pending.  Queuing.\n");
-               goto done;
-       }
-
-       if (iwl_is_rfkill(priv)) {
-               IWL_DEBUG_HC("Aborting scan due to RF Kill activation\n");
-               goto done;
-       }
-
-       if (!test_bit(STATUS_READY, &priv->status)) {
-               IWL_DEBUG_HC("Scan request while uninitialized.  Queuing.\n");
-               goto done;
-       }
-
-       if (!priv->scan_bands) {
-               IWL_DEBUG_HC("Aborting scan due to no requested bands\n");
-               goto done;
-       }
-
-       if (!priv->scan) {
-               priv->scan = kmalloc(sizeof(struct iwl4965_scan_cmd) +
-                                    IWL_MAX_SCAN_SIZE, GFP_KERNEL);
-               if (!priv->scan) {
-                       ret = -ENOMEM;
-                       goto done;
-               }
-       }
-       scan = priv->scan;
-       memset(scan, 0, sizeof(struct iwl4965_scan_cmd) + IWL_MAX_SCAN_SIZE);
-
-       scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
-       scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
-
-       if (iwl_is_associated(priv)) {
-               u16 interval = 0;
-               u32 extra;
-               u32 suspend_time = 100;
-               u32 scan_suspend_time = 100;
-               unsigned long flags;
-
-               IWL_DEBUG_INFO("Scanning while associated...\n");
-
-               spin_lock_irqsave(&priv->lock, flags);
-               interval = priv->beacon_int;
-               spin_unlock_irqrestore(&priv->lock, flags);
-
-               scan->suspend_time = 0;
-               scan->max_out_time = cpu_to_le32(200 * 1024);
-               if (!interval)
-                       interval = suspend_time;
-
-               extra = (suspend_time / interval) << 22;
-               scan_suspend_time = (extra |
-                   ((suspend_time % interval) * 1024));
-               scan->suspend_time = cpu_to_le32(scan_suspend_time);
-               IWL_DEBUG_SCAN("suspend_time 0x%X beacon interval %d\n",
-                              scan_suspend_time, interval);
-       }
-
-       /* We should add the ability for user to lock to PASSIVE ONLY */
-       if (priv->one_direct_scan) {
-               IWL_DEBUG_SCAN
-                   ("Kicking off one direct scan for '%s'\n",
-                    iwl4965_escape_essid(priv->direct_ssid,
-                                     priv->direct_ssid_len));
-               scan->direct_scan[0].id = WLAN_EID_SSID;
-               scan->direct_scan[0].len = priv->direct_ssid_len;
-               memcpy(scan->direct_scan[0].ssid,
-                      priv->direct_ssid, priv->direct_ssid_len);
-               direct_mask = 1;
-       } else if (!iwl_is_associated(priv) && priv->essid_len) {
-               IWL_DEBUG_SCAN
-                 ("Kicking off one direct scan for '%s' when not associated\n",
-                  iwl4965_escape_essid(priv->essid, priv->essid_len));
-               scan->direct_scan[0].id = WLAN_EID_SSID;
-               scan->direct_scan[0].len = priv->essid_len;
-               memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len);
-               direct_mask = 1;
-       } else {
-               IWL_DEBUG_SCAN("Kicking off one indirect scan.\n");
-               direct_mask = 0;
-       }
-
-       scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
-       scan->tx_cmd.sta_id = priv->hw_params.bcast_sta_id;
-       scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
-
-
-       switch (priv->scan_bands) {
-       case 2:
-               scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
-               scan->tx_cmd.rate_n_flags =
-                               iwl4965_hw_set_rate_n_flags(IWL_RATE_1M_PLCP,
-                               RATE_MCS_ANT_B_MSK|RATE_MCS_CCK_MSK);
-
-               scan->good_CRC_th = 0;
-               band = IEEE80211_BAND_2GHZ;
-               break;
-
-       case 1:
-               scan->tx_cmd.rate_n_flags =
-                               iwl4965_hw_set_rate_n_flags(IWL_RATE_6M_PLCP,
-                               RATE_MCS_ANT_B_MSK);
-               scan->good_CRC_th = IWL_GOOD_CRC_TH;
-               band = IEEE80211_BAND_5GHZ;
-               break;
-
-       default:
-               IWL_WARNING("Invalid scan band count\n");
-               goto done;
-       }
-
-       /* We don't build a direct scan probe request; the uCode will do
-        * that based on the direct_mask added to each channel entry */
-       cmd_len = iwl4965_fill_probe_req(priv, band,
-                                       (struct ieee80211_mgmt *)scan->data,
-                                       IWL_MAX_SCAN_SIZE - sizeof(*scan), 0);
-
-       scan->tx_cmd.len = cpu_to_le16(cmd_len);
-       /* select Rx chains */
-
-       /* Force use of chains B and C (0x6) for scan Rx.
-        * Avoid A (0x1) because of its off-channel reception on A-band.
-        * MIMO is not used here, but value is required to make uCode happy. */
-       scan->rx_chain = RXON_RX_CHAIN_DRIVER_FORCE_MSK |
-                       cpu_to_le16((0x7 << RXON_RX_CHAIN_VALID_POS) |
-                       (0x6 << RXON_RX_CHAIN_FORCE_SEL_POS) |
-                       (0x7 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS));
-
-       if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR)
-               scan->filter_flags = RXON_FILTER_PROMISC_MSK;
-
-       if (direct_mask)
-               scan->channel_count =
-                       iwl4965_get_channels_for_scan(
-                               priv, band, 1, /* active */
-                               direct_mask,
-                               (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
-       else
-               scan->channel_count =
-                       iwl4965_get_channels_for_scan(
-                               priv, band, 0, /* passive */
-                               direct_mask,
-                               (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
-
-       scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK |
-                              RXON_FILTER_BCON_AWARE_MSK);
-       cmd.len += le16_to_cpu(scan->tx_cmd.len) +
-           scan->channel_count * sizeof(struct iwl4965_scan_channel);
-       cmd.data = scan;
-       scan->len = cpu_to_le16(cmd.len);
-
-       set_bit(STATUS_SCAN_HW, &priv->status);
-       ret = iwl_send_cmd_sync(priv, &cmd);
-       if (ret)
-               goto done;
-
-       queue_delayed_work(priv->workqueue, &priv->scan_check,
-                          IWL_SCAN_CHECK_WATCHDOG);
-
-       mutex_unlock(&priv->mutex);
-       return;
-
- done:
-       /* inform mac80211 scan aborted */
-       queue_work(priv->workqueue, &priv->scan_completed);
-       mutex_unlock(&priv->mutex);
-}
-
 static void iwl_bg_run_time_calib_work(struct work_struct *work)
 {
        struct iwl_priv *priv = container_of(work, struct iwl_priv,
@@ -3521,7 +2703,7 @@ static void iwl4965_post_associate(struct iwl_priv *priv)
        if (!priv->vif || !priv->is_open)
                return;
 
-       iwl4965_scan_cancel_timeout(priv, 200);
+       iwl_scan_cancel_timeout(priv, 200);
 
        conf = ieee80211_get_hw_conf(priv->hw);
 
@@ -3615,24 +2797,9 @@ static void iwl4965_bg_post_associate(struct work_struct *data)
 
 }
 
-static void iwl4965_bg_abort_scan(struct work_struct *work)
-{
-       struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan);
-
-       if (!iwl_is_ready(priv))
-               return;
-
-       mutex_lock(&priv->mutex);
-
-       set_bit(STATUS_SCAN_ABORTING, &priv->status);
-       iwl4965_send_scan_abort(priv);
-
-       mutex_unlock(&priv->mutex);
-}
-
 static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf);
 
-static void iwl4965_bg_scan_completed(struct work_struct *work)
+static void iwl_bg_scan_completed(struct work_struct *work)
 {
        struct iwl_priv *priv =
            container_of(work, struct iwl_priv, scan_completed);
@@ -3759,7 +2926,7 @@ static void iwl4965_mac_stop(struct ieee80211_hw *hw)
                 * RXON_FILTER_ASSOC_MSK BIT
                 */
                mutex_lock(&priv->mutex);
-               iwl4965_scan_cancel_timeout(priv, 100);
+               iwl_scan_cancel_timeout(priv, 100);
                cancel_delayed_work(&priv->post_associate);
                mutex_unlock(&priv->mutex);
        }
@@ -4071,7 +3238,7 @@ static int iwl4965_mac_config_interface(struct ieee80211_hw *hw,
            !is_multicast_ether_addr(conf->bssid)) {
                /* If there is currently a HW scan going on in the background
                 * then we need to cancel it else the RXON below will fail. */
-               if (iwl4965_scan_cancel_timeout(priv, 100)) {
+               if (iwl_scan_cancel_timeout(priv, 100)) {
                        IWL_WARNING("Aborted scan still in progress "
                                    "after 100ms\n");
                        IWL_DEBUG_MAC80211("leaving - scan abort failed.\n");
@@ -4096,7 +3263,7 @@ static int iwl4965_mac_config_interface(struct ieee80211_hw *hw,
                }
 
        } else {
-               iwl4965_scan_cancel_timeout(priv, 100);
+               iwl_scan_cancel_timeout(priv, 100);
                priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
                iwl4965_commit_rxon(priv);
        }
@@ -4154,7 +3321,7 @@ static void iwl4965_mac_remove_interface(struct ieee80211_hw *hw,
        mutex_lock(&priv->mutex);
 
        if (iwl_is_ready_rf(priv)) {
-               iwl4965_scan_cancel_timeout(priv, 100);
+               iwl_scan_cancel_timeout(priv, 100);
                cancel_delayed_work(&priv->post_associate);
                priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
                iwl4965_commit_rxon(priv);
@@ -4268,7 +3435,7 @@ static int iwl4965_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len)
        }
        if (len) {
                IWL_DEBUG_SCAN("direct scan for %s [%d]\n ",
-                              iwl4965_escape_essid(ssid, len), (int)len);
+                              iwl_escape_essid(ssid, len), (int)len);
 
                priv->one_direct_scan = 1;
                priv->direct_ssid_len = (u8)
@@ -4277,7 +3444,7 @@ static int iwl4965_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len)
        } else
                priv->one_direct_scan = 0;
 
-       rc = iwl4965_scan_initiate(priv);
+       rc = iwl_scan_initiate(priv);
 
        IWL_DEBUG_MAC80211("leave\n");
 
@@ -4308,7 +3475,7 @@ static void iwl4965_mac_update_tkip_key(struct ieee80211_hw *hw,
                return;
        }
 
-       iwl4965_scan_cancel_timeout(priv, 100);
+       iwl_scan_cancel_timeout(priv, 100);
 
        key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK);
        key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
@@ -4366,7 +3533,7 @@ static int iwl4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
        }
 
        mutex_lock(&priv->mutex);
-       iwl4965_scan_cancel_timeout(priv, 100);
+       iwl_scan_cancel_timeout(priv, 100);
        mutex_unlock(&priv->mutex);
 
        /* If we are getting WEP group key and we didn't receive any key mapping
@@ -4562,7 +3729,7 @@ static void iwl4965_mac_reset_tsf(struct ieee80211_hw *hw)
         * clear RXON_FILTER_ASSOC_MSK bit
         */
        if (priv->iw_mode != IEEE80211_IF_TYPE_AP) {
-               iwl4965_scan_cancel_timeout(priv, 100);
+               iwl_scan_cancel_timeout(priv, 100);
                priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
                iwl4965_commit_rxon(priv);
        }
@@ -4759,7 +3926,7 @@ static ssize_t store_flags(struct device *d,
        mutex_lock(&priv->mutex);
        if (le32_to_cpu(priv->staging_rxon.flags) != flags) {
                /* Cancel any currently running scans... */
-               if (iwl4965_scan_cancel_timeout(priv, 100))
+               if (iwl_scan_cancel_timeout(priv, 100))
                        IWL_WARNING("Could not cancel scan.\n");
                else {
                        IWL_DEBUG_INFO("Committing rxon.flags = 0x%04X\n",
@@ -4794,7 +3961,7 @@ static ssize_t store_filter_flags(struct device *d,
        mutex_lock(&priv->mutex);
        if (le32_to_cpu(priv->staging_rxon.filter_flags) != filter_flags) {
                /* Cancel any currently running scans... */
-               if (iwl4965_scan_cancel_timeout(priv, 100))
+               if (iwl_scan_cancel_timeout(priv, 100))
                        IWL_WARNING("Could not cancel scan.\n");
                else {
                        IWL_DEBUG_INFO("Committing rxon.filter_flags = "
@@ -5062,9 +4229,6 @@ static void iwl_setup_deferred_work(struct iwl_priv *priv)
        INIT_WORK(&priv->up, iwl4965_bg_up);
        INIT_WORK(&priv->restart, iwl4965_bg_restart);
        INIT_WORK(&priv->rx_replenish, iwl4965_bg_rx_replenish);
-       INIT_WORK(&priv->scan_completed, iwl4965_bg_scan_completed);
-       INIT_WORK(&priv->request_scan, iwl4965_bg_request_scan);
-       INIT_WORK(&priv->abort_scan, iwl4965_bg_abort_scan);
        INIT_WORK(&priv->rf_kill, iwl4965_bg_rf_kill);
        INIT_WORK(&priv->beacon_update, iwl4965_bg_beacon_update);
        INIT_WORK(&priv->set_monitor, iwl4965_bg_set_monitor);
@@ -5072,7 +4236,10 @@ static void iwl_setup_deferred_work(struct iwl_priv *priv)
        INIT_DELAYED_WORK(&priv->post_associate, iwl4965_bg_post_associate);
        INIT_DELAYED_WORK(&priv->init_alive_start, iwl_bg_init_alive_start);
        INIT_DELAYED_WORK(&priv->alive_start, iwl_bg_alive_start);
-       INIT_DELAYED_WORK(&priv->scan_check, iwl4965_bg_scan_check);
+
+       /* FIXME : remove when resolved PENDING */
+       INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed);
+       iwl_setup_scan_deferred_work(priv);
 
        if (priv->cfg->ops->lib->setup_deferred_work)
                priv->cfg->ops->lib->setup_deferred_work(priv);