]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
hwmon/pc87360 separate alarm files: define some constants
authorJim Cromie <jim.cromie@gmail.com>
Sun, 19 Oct 2008 03:27:30 +0000 (20:27 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Mon, 20 Oct 2008 15:52:35 +0000 (08:52 -0700)
Bring hwmon/pc87360 into agreement with
Documentation/hwmon/sysfs-interface.

Patchset adds separate limit alarms for voltages and temps, it also adds
temp[123]_fault files.  On my Soekris, temps 1,2 are unused/unconnected,
so temp[123]_fault = 1,1,0 respectively.  This agrees with
/usr/bin/sensors, which has always shown them as OPEN.  Temps 4,5,6 are
thermistor based, and dont have a fault bit in their status register.

This patch:

2 different kinds of constants added:
- CHAN_ALM_* constants for (later) vin, temp alarm callbacks.
- CHAN_* conversion constants, used in _init_device, partly for RW1C bits

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/hwmon/pc87360.c

index 9b462bb13fa33b3b9cc67d66e884628a7e2043ba..1043b116bdede8739c347a4854fe0019d3b3d7c4 100644 (file)
@@ -489,6 +489,11 @@ static struct sensor_device_attribute in_max[] = {
        SENSOR_ATTR(in10_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 10),
 };
 
+/* (temp & vin) channel status register alarm bits (pdf sec.11.5.12) */
+#define CHAN_ALM_MIN   0x02    /* min limit crossed */
+#define CHAN_ALM_MAX   0x04    /* max limit exceeded */
+#define TEMP_ALM_CRIT  0x08    /* temp crit exceeded (temp only) */
+
 #define VIN_UNIT_ATTRS(X) \
        &in_input[X].dev_attr.attr,     \
        &in_status[X].dev_attr.attr,    \
@@ -1131,6 +1136,12 @@ static void pc87360_write_value(struct pc87360_data *data, u8 ldi, u8 bank,
        mutex_unlock(&(data->lock));
 }
 
+/* (temp & vin) channel conversion status register flags (pdf sec.11.5.12) */
+#define CHAN_CNVRTD    0x80    /* new data ready */
+#define CHAN_ENA       0x01    /* enabled channel (temp or vin) */
+#define CHAN_ALM_ENA   0x10    /* propagate to alarms-reg ?? (chk val!) */
+#define CHAN_READY     (CHAN_ENA|CHAN_CNVRTD) /* sample ready mask */
+
 static void pc87360_init_device(struct platform_device *pdev,
                                int use_thermistors)
 {
@@ -1156,7 +1167,7 @@ static void pc87360_init_device(struct platform_device *pdev,
                        /* Forcibly enable voltage channel */
                        reg = pc87360_read_value(data, LD_IN, i,
                                                 PC87365_REG_IN_STATUS);
-                       if (!(reg & 0x01)) {
+                       if (!(reg & CHAN_ENA)) {
                                dev_dbg(&pdev->dev, "Forcibly "
                                        "enabling in%d\n", i);
                                pc87360_write_value(data, LD_IN, i,
@@ -1171,7 +1182,7 @@ static void pc87360_init_device(struct platform_device *pdev,
        for (i = 11; i < data->innr; i++) {
                reg = pc87360_read_value(data, LD_IN, i,
                                         PC87365_REG_TEMP_STATUS);
-               use_thermistors = use_thermistors || (reg & 0x01);
+               use_thermistors = use_thermistors || (reg & CHAN_ENA);
        }
 
        i = use_thermistors ? 2 : 0;
@@ -1180,7 +1191,7 @@ static void pc87360_init_device(struct platform_device *pdev,
                        /* Forcibly enable temperature channel */
                        reg = pc87360_read_value(data, LD_TEMP, i,
                                                 PC87365_REG_TEMP_STATUS);
-                       if (!(reg & 0x01)) {
+                       if (!(reg & CHAN_ENA)) {
                                dev_dbg(&pdev->dev, "Forcibly "
                                        "enabling temp%d\n", i+1);
                                pc87360_write_value(data, LD_TEMP, i,
@@ -1197,7 +1208,7 @@ static void pc87360_init_device(struct platform_device *pdev,
                                   diodes */
                                reg = pc87360_read_value(data, LD_TEMP,
                                      (i-11)/2, PC87365_REG_TEMP_STATUS);
-                               if (reg & 0x01) {
+                               if (reg & CHAN_ENA) {
                                        dev_dbg(&pdev->dev, "Skipping "
                                                "temp%d, pin already in use "
                                                "by temp%d\n", i-7, (i-11)/2);
@@ -1207,7 +1218,7 @@ static void pc87360_init_device(struct platform_device *pdev,
                                /* Forcibly enable thermistor channel */
                                reg = pc87360_read_value(data, LD_IN, i,
                                                         PC87365_REG_IN_STATUS);
-                               if (!(reg & 0x01)) {
+                               if (!(reg & CHAN_ENA)) {
                                        dev_dbg(&pdev->dev, "Forcibly "
                                                "enabling temp%d\n", i-7);
                                        pc87360_write_value(data, LD_IN, i,
@@ -1221,7 +1232,7 @@ static void pc87360_init_device(struct platform_device *pdev,
        if (data->innr) {
                reg = pc87360_read_value(data, LD_IN, NO_BANK,
                                         PC87365_REG_IN_CONFIG);
-               if (reg & 0x01) {
+               if (reg & CHAN_ENA) {
                        dev_dbg(&pdev->dev, "Forcibly "
                                "enabling monitoring (VLM)\n");
                        pc87360_write_value(data, LD_IN, NO_BANK,
@@ -1233,7 +1244,7 @@ static void pc87360_init_device(struct platform_device *pdev,
        if (data->tempnr) {
                reg = pc87360_read_value(data, LD_TEMP, NO_BANK,
                                         PC87365_REG_TEMP_CONFIG);
-               if (reg & 0x01) {
+               if (reg & CHAN_ENA) {
                        dev_dbg(&pdev->dev, "Forcibly enabling "
                                "monitoring (TMS)\n");
                        pc87360_write_value(data, LD_TEMP, NO_BANK,
@@ -1336,11 +1347,11 @@ static struct pc87360_data *pc87360_update_device(struct device *dev)
                        pc87360_write_value(data, LD_IN, i,
                                            PC87365_REG_IN_STATUS,
                                            data->in_status[i]);
-                       if ((data->in_status[i] & 0x81) == 0x81) {
+                       if ((data->in_status[i] & CHAN_READY) == CHAN_READY) {
                                data->in[i] = pc87360_read_value(data, LD_IN,
                                              i, PC87365_REG_IN);
                        }
-                       if (data->in_status[i] & 0x01) {
+                       if (data->in_status[i] & CHAN_ENA) {
                                data->in_min[i] = pc87360_read_value(data,
                                                  LD_IN, i,
                                                  PC87365_REG_IN_MIN);
@@ -1373,12 +1384,12 @@ static struct pc87360_data *pc87360_update_device(struct device *dev)
                        pc87360_write_value(data, LD_TEMP, i,
                                            PC87365_REG_TEMP_STATUS,
                                            data->temp_status[i]);
-                       if ((data->temp_status[i] & 0x81) == 0x81) {
+                       if ((data->temp_status[i] & CHAN_READY) == CHAN_READY) {
                                data->temp[i] = pc87360_read_value(data,
                                                LD_TEMP, i,
                                                PC87365_REG_TEMP);
                        }
-                       if (data->temp_status[i] & 0x01) {
+                       if (data->temp_status[i] & CHAN_ENA) {
                                data->temp_min[i] = pc87360_read_value(data,
                                                    LD_TEMP, i,
                                                    PC87365_REG_TEMP_MIN);