]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
alim15x3: use ->host_flags and ->udma_mask fields from ide_pci_device_t
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Fri, 19 Oct 2007 22:32:30 +0000 (00:32 +0200)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Fri, 19 Oct 2007 22:32:30 +0000 (00:32 +0200)
* Make a local copy of ali15x3_chipset in alim15x3_init_one() and set
  ->host_flags / ->udma_mask according to the controller capabilities.

* Cleanup init_hwif_common_ali15x3().

* Bump driver version.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/pci/alim15x3.c

index 1ab769b31e6476d35e84f87ede0e7757ade702ad..fe816fd67669f646a0cba3c06c66a8897a944781 100644 (file)
@@ -1,5 +1,5 @@
 /*
- * linux/drivers/ide/pci/alim15x3.c            Version 0.28    Sep 15 2007
+ * linux/drivers/ide/pci/alim15x3.c            Version 0.29    Sep 16 2007
  *
  *  Copyright (C) 1998-2000 Michel Aubry, Maintainer
  *  Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer
@@ -666,31 +666,9 @@ static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif)
        hwif->set_dma_mode = &ali_set_dma_mode;
        hwif->udma_filter = &ali_udma_filter;
 
-       /* don't use LBA48 DMA on ALi devices before rev 0xC5 */
-       if (m5229_revision <= 0xC4)
-               hwif->host_flags |= IDE_HFLAG_NO_LBA48_DMA;
-
        if (hwif->dma_base == 0)
                return;
 
-       /*
-        * check in ->init_dma guarantees m5229_revision >= 0x20 here
-        */
-
-       if (m5229_revision == 0x20)
-               hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
-
-       if (m5229_revision <= 0x20)
-               hwif->ultra_mask = 0x00; /* no udma */
-       else if (m5229_revision < 0xC2)
-               hwif->ultra_mask = ATA_UDMA2;
-       else if (m5229_revision == 0xC2 || m5229_revision == 0xC3)
-               hwif->ultra_mask = ATA_UDMA4;
-       else if (m5229_revision == 0xC4)
-               hwif->ultra_mask = ATA_UDMA5;
-       else
-               hwif->ultra_mask = ATA_UDMA6;
-
        hwif->dma_setup = &ali15x3_dma_setup;
 
        if (hwif->cbl != ATA_CBL_PATA40_SHORT)
@@ -794,15 +772,34 @@ static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_dev
                { },
        };
 
-       ide_pci_device_t *d = &ali15x3_chipset;
+       ide_pci_device_t d = ali15x3_chipset;
+       u8 rev = dev->revision;
 
        if (pci_dev_present(ati_rs100))
                printk(KERN_WARNING "alim15x3: ATI Radeon IGP Northbridge is not yet fully tested.\n");
 
+       /* don't use LBA48 DMA on ALi devices before rev 0xC5 */
+       if (rev <= 0xC4)
+               d.host_flags |= IDE_HFLAG_NO_LBA48_DMA;
+
+       if (rev >= 0x20) {
+               if (rev == 0x20)
+                       d.host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
+
+               if (rev < 0xC2)
+                       d.udma_mask = ATA_UDMA2;
+               else if (rev == 0xC2 || rev == 0xC3)
+                       d.udma_mask = ATA_UDMA4;
+               else if (rev == 0xC4)
+                       d.udma_mask = ATA_UDMA5;
+               else
+                       d.udma_mask = ATA_UDMA6;
+       }
+
 #if defined(CONFIG_SPARC64)
-       d->init_hwif = init_hwif_common_ali15x3;
+       d.init_hwif = init_hwif_common_ali15x3;
 #endif /* CONFIG_SPARC64 */
-       return ide_setup_pci_device(dev, d);
+       return ide_setup_pci_device(dev, &d);
 }