*
* Version history:
*
- * July 11, 2002 Removed 4 port device structure since all TI UMP
- * chips have only 2 ports
+ * July 11, 2002 Removed 4 port device structure since all TI UMP
+ * chips have only 2 ports
* David Iacovelli (davidi@ionetworks.com)
*
*/
#include <linux/serial.h>
#include <linux/ioctl.h>
#include <linux/firmware.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
struct edgeport_uart_buf_desc {
- __u32 count; // Number of bytes currently in buffer
+ __u32 count; /* Number of bytes currently in buffer */
};
/* different hardware types */
#define HARDWARE_TYPE_930 0
#define HARDWARE_TYPE_TIUMP 1
-// IOCTL_PRIVATE_TI_GET_MODE Definitions
-#define TI_MODE_CONFIGURING 0 // Device has not entered start device
-#define TI_MODE_BOOT 1 // Staying in boot mode
-#define TI_MODE_DOWNLOAD 2 // Made it to download mode
-#define TI_MODE_TRANSITIONING 3 // Currently in boot mode but transitioning to download mode
+/* IOCTL_PRIVATE_TI_GET_MODE Definitions */
+#define TI_MODE_CONFIGURING 0 /* Device has not entered start device */
+#define TI_MODE_BOOT 1 /* Staying in boot mode */
+#define TI_MODE_DOWNLOAD 2 /* Made it to download mode */
+#define TI_MODE_TRANSITIONING 3 /* Currently in boot mode but
+ transitioning to download mode */
/* read urb state */
#define EDGE_READ_URB_RUNNING 0
/* Product information read from the Edgeport */
-struct product_info
-{
- int TiMode; // Current TI Mode
- __u8 hardware_type; // Type of hardware
+struct product_info {
+ int TiMode; /* Current TI Mode */
+ __u8 hardware_type; /* Type of hardware */
} __attribute__((packed));
/* circular buffer */
happen */
struct edgeport_serial *edge_serial;
struct usb_serial_port *port;
- __u8 bUartMode; /* Port type, 0: RS232, etc. */
+ __u8 bUartMode; /* Port type, 0: RS232, etc. */
spinlock_t ep_lock;
int ep_read_urb_state;
int ep_write_urb_in_use;
struct edgeport_serial {
struct product_info product_info;
- u8 TI_I2C_Type; // Type of I2C in UMP
- u8 TiReadI2C; // Set to TRUE if we have read the I2c in Boot Mode
+ u8 TI_I2C_Type; /* Type of I2C in UMP */
+ u8 TiReadI2C; /* Set to TRUE if we have read the
+ I2c in Boot Mode */
struct mutex es_lock;
int num_ports_open;
struct usb_serial *serial;
{ }
};
-MODULE_DEVICE_TABLE (usb, id_table_combined);
+MODULE_DEVICE_TABLE(usb, id_table_combined);
static struct usb_driver io_driver = {
.name = "io_ti",
static int debug;
-static int TIStayInBootMode = 0;
static int low_latency = EDGE_LOW_LATENCY;
static int closing_wait = EDGE_CLOSING_WAIT;
-static int ignore_cpu_rev = 0;
-static int default_uart_mode = 0; /* RS232 */
-
+static int ignore_cpu_rev;
+static int default_uart_mode; /* RS232 */
-static void edge_tty_recv(struct device *dev, struct tty_struct *tty, unsigned char *data, int length);
+static void edge_tty_recv(struct device *dev, struct tty_struct *tty,
+ unsigned char *data, int length);
static void stop_read(struct edgeport_port *edge_port);
static int restart_read(struct edgeport_port *edge_port);
-static void edge_set_termios (struct usb_serial_port *port, struct ktermios *old_termios);
+static void edge_set_termios(struct usb_serial_port *port,
+ struct ktermios *old_termios);
static void edge_send(struct usb_serial_port *port);
/* sysfs attributes */
unsigned int count);
-static int TIReadVendorRequestSync (struct usb_device *dev,
- __u8 request,
- __u16 value,
- __u16 index,
- u8 *data,
- int size)
+static int ti_vread_sync(struct usb_device *dev, __u8 request,
+ __u16 value, __u16 index, u8 *data, int size)
{
int status;
- status = usb_control_msg (dev,
- usb_rcvctrlpipe(dev, 0),
- request,
- (USB_TYPE_VENDOR |
- USB_RECIP_DEVICE |
- USB_DIR_IN),
- value,
- index,
- data,
- size,
- 1000);
+ status = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
+ (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN),
+ value, index, data, size, 1000);
if (status < 0)
return status;
if (status != size) {
- dbg ("%s - wanted to write %d, but only wrote %d",
- __func__, size, status);
+ dbg("%s - wanted to write %d, but only wrote %d",
+ __func__, size, status);
return -ECOMM;
}
return 0;
}
-static int TISendVendorRequestSync (struct usb_device *dev,
- __u8 request,
- __u16 value,
- __u16 index,
- u8 *data,
- int size)
+static int ti_vsend_sync(struct usb_device *dev, __u8 request,
+ __u16 value, __u16 index, u8 *data, int size)
{
int status;
- status = usb_control_msg (dev,
- usb_sndctrlpipe(dev, 0),
- request,
- (USB_TYPE_VENDOR |
- USB_RECIP_DEVICE |
- USB_DIR_OUT),
- value,
- index,
- data,
- size,
- 1000);
+ status = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
+ (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT),
+ value, index, data, size, 1000);
if (status < 0)
return status;
if (status != size) {
- dbg ("%s - wanted to write %d, but only wrote %d",
+ dbg("%s - wanted to write %d, but only wrote %d",
__func__, size, status);
return -ECOMM;
}
return 0;
}
-static int TIWriteCommandSync (struct usb_device *dev, __u8 command,
+static int send_cmd(struct usb_device *dev, __u8 command,
__u8 moduleid, __u16 value, u8 *data,
int size)
{
- return TISendVendorRequestSync (dev,
- command, // Request
- value, // wValue
- moduleid, // wIndex
- data, // TransferBuffer
- size); // TransferBufferLength
-
+ return ti_vsend_sync(dev, command, value, moduleid, data, size);
}
/* clear tx/rx buffers and fifo in TI UMP */
-static int TIPurgeDataSync (struct usb_serial_port *port, __u16 mask)
+static int purge_port(struct usb_serial_port *port, __u16 mask)
{
int port_number = port->number - port->serial->minor;
- dbg ("%s - port %d, mask %x", __func__, port_number, mask);
+ dbg("%s - port %d, mask %x", __func__, port_number, mask);
- return TIWriteCommandSync (port->serial->dev,
+ return send_cmd(port->serial->dev,
UMPC_PURGE_PORT,
(__u8)(UMPM_UART1_PORT + port_number),
mask,
}
/**
- * TIReadDownloadMemory - Read edgeport memory from TI chip
+ * read_download_mem - Read edgeport memory from TI chip
* @dev: usb device pointer
* @start_address: Device CPU address at which to read
* @length: Length of above data
* @address_type: Can read both XDATA and I2C
* @buffer: pointer to input data buffer
*/
-static int TIReadDownloadMemory(struct usb_device *dev, int start_address,
+static int read_download_mem(struct usb_device *dev, int start_address,
int length, __u8 address_type, __u8 *buffer)
{
int status = 0;
__u8 read_length;
__be16 be_start_address;
-
- dbg ("%s - @ %x for %d", __func__, start_address, length);
+
+ dbg("%s - @ %x for %d", __func__, start_address, length);
/* Read in blocks of 64 bytes
* (TI firmware can't handle more than 64 byte reads)
*/
while (length) {
if (length > 64)
- read_length= 64;
+ read_length = 64;
else
read_length = (__u8)length;
if (read_length > 1) {
- dbg ("%s - @ %x for %d", __func__,
+ dbg("%s - @ %x for %d", __func__,
start_address, read_length);
}
- be_start_address = cpu_to_be16 (start_address);
- status = TIReadVendorRequestSync (dev,
- UMPC_MEMORY_READ, // Request
- (__u16)address_type, // wValue (Address type)
- (__force __u16)be_start_address, // wIndex (Address to read)
- buffer, // TransferBuffer
- read_length); // TransferBufferLength
+ be_start_address = cpu_to_be16(start_address);
+ status = ti_vread_sync(dev, UMPC_MEMORY_READ,
+ (__u16)address_type,
+ (__force __u16)be_start_address,
+ buffer, read_length);
if (status) {
- dbg ("%s - ERROR %x", __func__, status);
+ dbg("%s - ERROR %x", __func__, status);
return status;
}
- if (read_length > 1) {
+ if (read_length > 1)
usb_serial_debug_data(debug, &dev->dev, __func__,
read_length, buffer);
- }
/* Update pointers/length */
start_address += read_length;
buffer += read_length;
length -= read_length;
}
-
+
return status;
}
-static int TIReadRam (struct usb_device *dev, int start_address, int length, __u8 *buffer)
+static int read_ram(struct usb_device *dev, int start_address,
+ int length, __u8 *buffer)
{
- return TIReadDownloadMemory (dev,
- start_address,
- length,
- DTK_ADDR_SPACE_XDATA,
- buffer);
+ return read_download_mem(dev, start_address, length,
+ DTK_ADDR_SPACE_XDATA, buffer);
}
/* Read edgeport memory to a given block */
-static int TIReadBootMemory (struct edgeport_serial *serial, int start_address, int length, __u8 * buffer)
+static int read_boot_mem(struct edgeport_serial *serial,
+ int start_address, int length, __u8 *buffer)
{
int status = 0;
int i;
- for (i=0; i< length; i++) {
- status = TIReadVendorRequestSync (serial->serial->dev,
- UMPC_MEMORY_READ, // Request
- serial->TI_I2C_Type, // wValue (Address type)
- (__u16)(start_address+i), // wIndex
- &buffer[i], // TransferBuffer
- 0x01); // TransferBufferLength
+ for (i = 0; i < length; i++) {
+ status = ti_vread_sync(serial->serial->dev,
+ UMPC_MEMORY_READ, serial->TI_I2C_Type,
+ (__u16)(start_address+i), &buffer[i], 0x01);
if (status) {
- dbg ("%s - ERROR %x", __func__, status);
+ dbg("%s - ERROR %x", __func__, status);
return status;
}
}
- dbg ("%s - start_address = %x, length = %d", __func__, start_address, length);
- usb_serial_debug_data(debug, &serial->serial->dev->dev, __func__, length, buffer);
+ dbg("%s - start_address = %x, length = %d",
+ __func__, start_address, length);
+ usb_serial_debug_data(debug, &serial->serial->dev->dev,
+ __func__, length, buffer);
serial->TiReadI2C = 1;
}
/* Write given block to TI EPROM memory */
-static int TIWriteBootMemory (struct edgeport_serial *serial, int start_address, int length, __u8 *buffer)
+static int write_boot_mem(struct edgeport_serial *serial,
+ int start_address, int length, __u8 *buffer)
{
int status = 0;
int i;
/* Must do a read before write */
if (!serial->TiReadI2C) {
- status = TIReadBootMemory(serial, 0, 1, &temp);
+ status = read_boot_mem(serial, 0, 1, &temp);
if (status)
return status;
}
- for (i=0; i < length; ++i) {
- status = TISendVendorRequestSync (serial->serial->dev,
- UMPC_MEMORY_WRITE, // Request
- buffer[i], // wValue
- (__u16)(i+start_address), // wIndex
- NULL, // TransferBuffer
- 0); // TransferBufferLength
+ for (i = 0; i < length; ++i) {
+ status = ti_vsend_sync(serial->serial->dev,
+ UMPC_MEMORY_WRITE, buffer[i],
+ (__u16)(i + start_address), NULL, 0);
if (status)
return status;
}
- dbg ("%s - start_sddr = %x, length = %d", __func__, start_address, length);
- usb_serial_debug_data(debug, &serial->serial->dev->dev, __func__, length, buffer);
+ dbg("%s - start_sddr = %x, length = %d",
+ __func__, start_address, length);
+ usb_serial_debug_data(debug, &serial->serial->dev->dev,
+ __func__, length, buffer);
return status;
}
/* Write edgeport I2C memory to TI chip */
-static int TIWriteDownloadI2C (struct edgeport_serial *serial, int start_address, int length, __u8 address_type, __u8 *buffer)
+static int write_i2c_mem(struct edgeport_serial *serial,
+ int start_address, int length, __u8 address_type, __u8 *buffer)
{
int status = 0;
int write_length;
__be16 be_start_address;
/* We can only send a maximum of 1 aligned byte page at a time */
-
+
/* calulate the number of bytes left in the first page */
- write_length = EPROM_PAGE_SIZE - (start_address & (EPROM_PAGE_SIZE - 1));
+ write_length = EPROM_PAGE_SIZE -
+ (start_address & (EPROM_PAGE_SIZE - 1));
if (write_length > length)
write_length = length;
- dbg ("%s - BytesInFirstPage Addr = %x, length = %d", __func__, start_address, write_length);
- usb_serial_debug_data(debug, &serial->serial->dev->dev, __func__, write_length, buffer);
+ dbg("%s - BytesInFirstPage Addr = %x, length = %d",
+ __func__, start_address, write_length);
+ usb_serial_debug_data(debug, &serial->serial->dev->dev,
+ __func__, write_length, buffer);
/* Write first page */
- be_start_address = cpu_to_be16 (start_address);
- status = TISendVendorRequestSync (serial->serial->dev,
- UMPC_MEMORY_WRITE, // Request
- (__u16)address_type, // wValue
- (__force __u16)be_start_address, // wIndex
- buffer, // TransferBuffer
- write_length);
+ be_start_address = cpu_to_be16(start_address);
+ status = ti_vsend_sync(serial->serial->dev,
+ UMPC_MEMORY_WRITE, (__u16)address_type,
+ (__force __u16)be_start_address,
+ buffer, write_length);
if (status) {
- dbg ("%s - ERROR %d", __func__, status);
+ dbg("%s - ERROR %d", __func__, status);
return status;
}
start_address += write_length;
buffer += write_length;
- /* We should be aligned now -- can write max page size bytes at a time */
+ /* We should be aligned now -- can write
+ max page size bytes at a time */
while (length) {
if (length > EPROM_PAGE_SIZE)
write_length = EPROM_PAGE_SIZE;
else
write_length = length;
- dbg ("%s - Page Write Addr = %x, length = %d", __func__, start_address, write_length);
- usb_serial_debug_data(debug, &serial->serial->dev->dev, __func__, write_length, buffer);
+ dbg("%s - Page Write Addr = %x, length = %d",
+ __func__, start_address, write_length);
+ usb_serial_debug_data(debug, &serial->serial->dev->dev,
+ __func__, write_length, buffer);
/* Write next page */
- be_start_address = cpu_to_be16 (start_address);
- status = TISendVendorRequestSync (serial->serial->dev,
- UMPC_MEMORY_WRITE, // Request
- (__u16)address_type, // wValue
- (__force __u16)be_start_address, // wIndex
- buffer, // TransferBuffer
- write_length); // TransferBufferLength
+ be_start_address = cpu_to_be16(start_address);
+ status = ti_vsend_sync(serial->serial->dev, UMPC_MEMORY_WRITE,
+ (__u16)address_type,
+ (__force __u16)be_start_address,
+ buffer, write_length);
if (status) {
- dev_err (&serial->serial->dev->dev, "%s - ERROR %d\n", __func__, status);
+ dev_err(&serial->serial->dev->dev, "%s - ERROR %d\n",
+ __func__, status);
return status;
}
-
+
length -= write_length;
start_address += write_length;
buffer += write_length;
}
/* Examine the UMP DMA registers and LSR
- *
+ *
* Check the MSBit of the X and Y DMA byte count registers.
* A zero in this bit indicates that the TX DMA buffers are empty
* then check the TX Empty bit in the UART.
*/
-static int TIIsTxActive (struct edgeport_port *port)
+static int tx_active(struct edgeport_port *port)
{
int status;
struct out_endpoint_desc_block *oedb;
__u8 *lsr;
int bytes_left = 0;
- oedb = kmalloc (sizeof (* oedb), GFP_KERNEL);
+ oedb = kmalloc(sizeof(*oedb), GFP_KERNEL);
if (!oedb) {
- dev_err (&port->port->dev, "%s - out of memory\n", __func__);
+ dev_err(&port->port->dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
- lsr = kmalloc (1, GFP_KERNEL); /* Sigh, that's right, just one byte,
+ lsr = kmalloc(1, GFP_KERNEL); /* Sigh, that's right, just one byte,
as not all platforms can do DMA
from stack */
if (!lsr) {
return -ENOMEM;
}
/* Read the DMA Count Registers */
- status = TIReadRam (port->port->serial->dev,
- port->dma_address,
- sizeof( *oedb),
- (void *)oedb);
-
+ status = read_ram(port->port->serial->dev, port->dma_address,
+ sizeof(*oedb), (void *)oedb);
if (status)
goto exit_is_tx_active;
- dbg ("%s - XByteCount 0x%X", __func__, oedb->XByteCount);
+ dbg("%s - XByteCount 0x%X", __func__, oedb->XByteCount);
/* and the LSR */
- status = TIReadRam (port->port->serial->dev,
- port->uart_base + UMPMEM_OFFS_UART_LSR,
- 1,
- lsr);
+ status = read_ram(port->port->serial->dev,
+ port->uart_base + UMPMEM_OFFS_UART_LSR, 1, lsr);
if (status)
goto exit_is_tx_active;
- dbg ("%s - LSR = 0x%X", __func__, *lsr);
-
+ dbg("%s - LSR = 0x%X", __func__, *lsr);
+
/* If either buffer has data or we are transmitting then return TRUE */
- if ((oedb->XByteCount & 0x80 ) != 0 )
+ if ((oedb->XByteCount & 0x80) != 0)
bytes_left += 64;
- if ((*lsr & UMP_UART_LSR_TX_MASK ) == 0 )
+ if ((*lsr & UMP_UART_LSR_TX_MASK) == 0)
bytes_left += 1;
/* We return Not Active if we get any kind of error */
exit_is_tx_active:
- dbg ("%s - return %d", __func__, bytes_left );
+ dbg("%s - return %d", __func__, bytes_left);
kfree(lsr);
kfree(oedb);
return bytes_left;
}
-static void TIChasePort(struct edgeport_port *port, unsigned long timeout, int flush)
+static void chase_port(struct edgeport_port *port, unsigned long timeout,
+ int flush)
{
int baud_rate;
struct tty_struct *tty = port->port->tty;
unsigned long flags;
if (!timeout)
- timeout = (HZ*EDGE_CLOSING_WAIT)/100;
+ timeout = (HZ * EDGE_CLOSING_WAIT)/100;
/* wait for data to drain from the buffer */
spin_lock_irqsave(&port->ep_lock, flags);
set_current_state(TASK_INTERRUPTIBLE);
if (edge_buf_data_avail(port->ep_out_buf) == 0
|| timeout == 0 || signal_pending(current)
- || !usb_get_intfdata(port->port->serial->interface)) /* disconnect */
+ || !usb_get_intfdata(port->port->serial->interface))
+ /* disconnect */
break;
spin_unlock_irqrestore(&port->ep_lock, flags);
timeout = schedule_timeout(timeout);
/* wait for data to drain from the device */
timeout += jiffies;
while ((long)(jiffies - timeout) < 0 && !signal_pending(current)
- && usb_get_intfdata(port->port->serial->interface)) { /* not disconnected */
- if (!TIIsTxActive(port))
+ && usb_get_intfdata(port->port->serial->interface)) {
+ /* not disconnected */
+ if (!tx_active(port))
break;
msleep(10);
}
return;
/* wait one more character time, based on baud rate */
- /* (TIIsTxActive doesn't seem to wait for the last byte) */
- if ((baud_rate=port->baud_rate) == 0)
+ /* (tx_active doesn't seem to wait for the last byte) */
+ baud_rate = port->baud_rate;
+ if (baud_rate == 0)
baud_rate = 50;
msleep(max(1, DIV_ROUND_UP(10000, baud_rate)));
}
-static int TIChooseConfiguration (struct usb_device *dev)
+static int choose_config(struct usb_device *dev)
{
- // There may be multiple configurations on this device, in which case
- // we would need to read and parse all of them to find out which one
- // we want. However, we just support one config at this point,
- // configuration # 1, which is Config Descriptor 0.
+ /*
+ * There may be multiple configurations on this device, in which case
+ * we would need to read and parse all of them to find out which one
+ * we want. However, we just support one config at this point,
+ * configuration # 1, which is Config Descriptor 0.
+ */
- dbg ("%s - Number of Interfaces = %d", __func__, dev->config->desc.bNumInterfaces);
- dbg ("%s - MAX Power = %d", __func__, dev->config->desc.bMaxPower*2);
+ dbg("%s - Number of Interfaces = %d",
+ __func__, dev->config->desc.bNumInterfaces);
+ dbg("%s - MAX Power = %d",
+ __func__, dev->config->desc.bMaxPower * 2);
if (dev->config->desc.bNumInterfaces != 1) {
- dev_err (&dev->dev, "%s - bNumInterfaces is not 1, ERROR!\n", __func__);
+ dev_err(&dev->dev, "%s - bNumInterfaces is not 1, ERROR!\n",
+ __func__);
return -ENODEV;
}
return 0;
}
-static int TIReadRom (struct edgeport_serial *serial, int start_address, int length, __u8 *buffer)
+static int read_rom(struct edgeport_serial *serial,
+ int start_address, int length, __u8 *buffer)
{
int status;
if (serial->product_info.TiMode == TI_MODE_DOWNLOAD) {
- status = TIReadDownloadMemory (serial->serial->dev,
+ status = read_download_mem(serial->serial->dev,
start_address,
length,
serial->TI_I2C_Type,
buffer);
} else {
- status = TIReadBootMemory (serial,
- start_address,
- length,
- buffer);
+ status = read_boot_mem(serial, start_address, length,
+ buffer);
}
-
return status;
}
-static int TIWriteRom (struct edgeport_serial *serial, int start_address, int length, __u8 *buffer)
+static int write_rom(struct edgeport_serial *serial, int start_address,
+ int length, __u8 *buffer)
{
if (serial->product_info.TiMode == TI_MODE_BOOT)
- return TIWriteBootMemory (serial,
- start_address,
- length,
- buffer);
+ return write_boot_mem(serial, start_address, length,
+ buffer);
if (serial->product_info.TiMode == TI_MODE_DOWNLOAD)
- return TIWriteDownloadI2C (serial,
- start_address,
- length,
- serial->TI_I2C_Type,
- buffer);
-
+ return write_i2c_mem(serial, start_address, length,
+ serial->TI_I2C_Type, buffer);
return -EINVAL;
}
/* Read a descriptor header from I2C based on type */
-static int TIGetDescriptorAddress (struct edgeport_serial *serial, int desc_type, struct ti_i2c_desc *rom_desc)
+static int get_descriptor_addr(struct edgeport_serial *serial,
+ int desc_type, struct ti_i2c_desc *rom_desc)
{
int start_address;
int status;
/* Search for requested descriptor in I2C */
start_address = 2;
do {
- status = TIReadRom (serial,
+ status = read_rom(serial,
start_address,
sizeof(struct ti_i2c_desc),
- (__u8 *)rom_desc );
+ (__u8 *)rom_desc);
if (status)
return 0;
if (rom_desc->Type == desc_type)
return start_address;
- start_address = start_address + sizeof(struct ti_i2c_desc) + rom_desc->Size;
+ start_address = start_address + sizeof(struct ti_i2c_desc)
+ + rom_desc->Size;
} while ((start_address < TI_MAX_I2C_SIZE) && rom_desc->Type);
-
+
return 0;
}
/* Validate descriptor checksum */
-static int ValidChecksum(struct ti_i2c_desc *rom_desc, __u8 *buffer)
+static int valid_csum(struct ti_i2c_desc *rom_desc, __u8 *buffer)
{
__u16 i;
__u8 cs = 0;
- for (i=0; i < rom_desc->Size; i++) {
+ for (i = 0; i < rom_desc->Size; i++)
cs = (__u8)(cs + buffer[i]);
- }
+
if (cs != rom_desc->CheckSum) {
- dbg ("%s - Mismatch %x - %x", __func__, rom_desc->CheckSum, cs);
+ dbg("%s - Mismatch %x - %x", __func__, rom_desc->CheckSum, cs);
return -EINVAL;
}
return 0;
}
/* Make sure that the I2C image is good */
-static int TiValidateI2cImage (struct edgeport_serial *serial)
+static int check_i2c_image(struct edgeport_serial *serial)
{
struct device *dev = &serial->serial->dev->dev;
int status = 0;
__u8 *buffer;
__u16 ttype;
- rom_desc = kmalloc (sizeof (*rom_desc), GFP_KERNEL);
+ rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
if (!rom_desc) {
- dev_err (dev, "%s - out of memory\n", __func__);
+ dev_err(dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
- buffer = kmalloc (TI_MAX_I2C_SIZE, GFP_KERNEL);
+ buffer = kmalloc(TI_MAX_I2C_SIZE, GFP_KERNEL);
if (!buffer) {
- dev_err (dev, "%s - out of memory when allocating buffer\n", __func__);
- kfree (rom_desc);
+ dev_err(dev, "%s - out of memory when allocating buffer\n",
+ __func__);
+ kfree(rom_desc);
return -ENOMEM;
}
- // Read the first byte (Signature0) must be 0x52 or 0x10
- status = TIReadRom (serial, 0, 1, buffer);
+ /* Read the first byte (Signature0) must be 0x52 or 0x10 */
+ status = read_rom(serial, 0, 1, buffer);
if (status)
- goto ExitTiValidateI2cImage;
+ goto out;
if (*buffer != UMP5152 && *buffer != UMP3410) {
- dev_err (dev, "%s - invalid buffer signature\n", __func__);
+ dev_err(dev, "%s - invalid buffer signature\n", __func__);
status = -ENODEV;
- goto ExitTiValidateI2cImage;
+ goto out;
}
do {
- // Validate the I2C
- status = TIReadRom (serial,
+ /* Validate the I2C */
+ status = read_rom(serial,
start_address,
sizeof(struct ti_i2c_desc),
(__u8 *)rom_desc);
if (status)
break;
- if ((start_address + sizeof(struct ti_i2c_desc) + rom_desc->Size) > TI_MAX_I2C_SIZE) {
+ if ((start_address + sizeof(struct ti_i2c_desc) +
+ rom_desc->Size) > TI_MAX_I2C_SIZE) {
status = -ENODEV;
- dbg ("%s - structure too big, erroring out.", __func__);
+ dbg("%s - structure too big, erroring out.", __func__);
break;
}
- dbg ("%s Type = 0x%x", __func__, rom_desc->Type);
+ dbg("%s Type = 0x%x", __func__, rom_desc->Type);
- // Skip type 2 record
+ /* Skip type 2 record */
ttype = rom_desc->Type & 0x0f;
- if ( ttype != I2C_DESC_TYPE_FIRMWARE_BASIC
- && ttype != I2C_DESC_TYPE_FIRMWARE_AUTO ) {
- // Read the descriptor data
- status = TIReadRom(serial,
- start_address+sizeof(struct ti_i2c_desc),
- rom_desc->Size,
- buffer);
+ if (ttype != I2C_DESC_TYPE_FIRMWARE_BASIC
+ && ttype != I2C_DESC_TYPE_FIRMWARE_AUTO) {
+ /* Read the descriptor data */
+ status = read_rom(serial, start_address +
+ sizeof(struct ti_i2c_desc),
+ rom_desc->Size, buffer);
if (status)
break;
- status = ValidChecksum(rom_desc, buffer);
+ status = valid_csum(rom_desc, buffer);
if (status)
break;
}
- start_address = start_address + sizeof(struct ti_i2c_desc) + rom_desc->Size;
+ start_address = start_address + sizeof(struct ti_i2c_desc) +
+ rom_desc->Size;
- } while ((rom_desc->Type != I2C_DESC_TYPE_ION) && (start_address < TI_MAX_I2C_SIZE));
+ } while ((rom_desc->Type != I2C_DESC_TYPE_ION) &&
+ (start_address < TI_MAX_I2C_SIZE));
- if ((rom_desc->Type != I2C_DESC_TYPE_ION) || (start_address > TI_MAX_I2C_SIZE))
+ if ((rom_desc->Type != I2C_DESC_TYPE_ION) ||
+ (start_address > TI_MAX_I2C_SIZE))
status = -ENODEV;
-ExitTiValidateI2cImage:
- kfree (buffer);
- kfree (rom_desc);
+out:
+ kfree(buffer);
+ kfree(rom_desc);
return status;
}
-static int TIReadManufDescriptor (struct edgeport_serial *serial, __u8 *buffer)
+static int get_manuf_info(struct edgeport_serial *serial, __u8 *buffer)
{
int status;
int start_address;
struct ti_i2c_desc *rom_desc;
struct edge_ti_manuf_descriptor *desc;
- rom_desc = kmalloc (sizeof (*rom_desc), GFP_KERNEL);
+ rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
if (!rom_desc) {
- dev_err (&serial->serial->dev->dev, "%s - out of memory\n", __func__);
+ dev_err(&serial->serial->dev->dev, "%s - out of memory\n",
+ __func__);
return -ENOMEM;
}
- start_address = TIGetDescriptorAddress (serial, I2C_DESC_TYPE_ION, rom_desc);
+ start_address = get_descriptor_addr(serial, I2C_DESC_TYPE_ION,
+ rom_desc);
if (!start_address) {
- dbg ("%s - Edge Descriptor not found in I2C", __func__);
+ dbg("%s - Edge Descriptor not found in I2C", __func__);
status = -ENODEV;
goto exit;
}
- // Read the descriptor data
- status = TIReadRom (serial,
- start_address+sizeof(struct ti_i2c_desc),
- rom_desc->Size,
- buffer);
+ /* Read the descriptor data */
+ status = read_rom(serial, start_address+sizeof(struct ti_i2c_desc),
+ rom_desc->Size, buffer);
if (status)
goto exit;
-
- status = ValidChecksum(rom_desc, buffer);
-
+
+ status = valid_csum(rom_desc, buffer);
+
desc = (struct edge_ti_manuf_descriptor *)buffer;
- dbg ( "%s - IonConfig 0x%x", __func__, desc->IonConfig );
- dbg ( "%s - Version %d", __func__, desc->Version );
- dbg ( "%s - Cpu/Board 0x%x", __func__, desc->CpuRev_BoardRev );
- dbg ( "%s - NumPorts %d", __func__, desc->NumPorts );
- dbg ( "%s - NumVirtualPorts %d", __func__, desc->NumVirtualPorts );
- dbg ( "%s - TotalPorts %d", __func__, desc->TotalPorts );
+ dbg("%s - IonConfig 0x%x", __func__, desc->IonConfig);
+ dbg("%s - Version %d", __func__, desc->Version);
+ dbg("%s - Cpu/Board 0x%x", __func__, desc->CpuRev_BoardRev);
+ dbg("%s - NumPorts %d", __func__, desc->NumPorts);
+ dbg("%s - NumVirtualPorts %d", __func__, desc->NumVirtualPorts);
+ dbg("%s - TotalPorts %d", __func__, desc->TotalPorts);
exit:
- kfree (rom_desc);
+ kfree(rom_desc);
return status;
}
/* Build firmware header used for firmware update */
-static int BuildI2CFirmwareHeader (__u8 *header, struct device *dev)
+static int build_i2c_fw_hdr(__u8 *header, struct device *dev)
{
__u8 *buffer;
int buffer_size;
const struct firmware *fw;
const char *fw_name = "edgeport/down3.bin";
- // In order to update the I2C firmware we must change the type 2 record to type 0xF2.
- // This will force the UMP to come up in Boot Mode. Then while in boot mode, the driver
- // will download the latest firmware (padded to 15.5k) into the UMP ram.
- // And finally when the device comes back up in download mode the driver will cause
- // the new firmware to be copied from the UMP Ram to I2C and the firmware will update
- // the record type from 0xf2 to 0x02.
-
- // Allocate a 15.5k buffer + 2 bytes for version number (Firmware Record)
- buffer_size = (((1024 * 16) - 512 )+ sizeof(struct ti_i2c_firmware_rec));
-
- buffer = kmalloc (buffer_size, GFP_KERNEL);
+ /* In order to update the I2C firmware we must change the type 2 record
+ * to type 0xF2. This will force the UMP to come up in Boot Mode.
+ * Then while in boot mode, the driver will download the latest
+ * firmware (padded to 15.5k) into the UMP ram. And finally when the
+ * device comes back up in download mode the driver will cause the new
+ * firmware to be copied from the UMP Ram to I2C and the firmware will
+ * update the record type from 0xf2 to 0x02.
+ */
+
+ /* Allocate a 15.5k buffer + 2 bytes for version number
+ * (Firmware Record) */
+ buffer_size = (((1024 * 16) - 512 ) +
+ sizeof(struct ti_i2c_firmware_rec));
+
+ buffer = kmalloc(buffer_size, GFP_KERNEL);
if (!buffer) {
- dev_err (dev, "%s - out of memory\n", __func__);
+ dev_err(dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
-
+
// Set entire image of 0xffs
- memset (buffer, 0xff, buffer_size);
+ memset(buffer, 0xff, buffer_size);
err = request_firmware(&fw, fw_name, dev);
if (err) {
OperationalMinorVersion = fw->data[1];
OperationalBuildNumber = fw->data[2] | (fw->data[3] << 8);
- // Copy version number into firmware record
+ /* Copy version number into firmware record */
firmware_rec = (struct ti_i2c_firmware_rec *)buffer;
firmware_rec->Ver_Major = OperationalMajorVersion;
firmware_rec->Ver_Minor = OperationalMinorVersion;
- // Pointer to fw_down memory image
+ /* Pointer to fw_down memory image */
img_header = (struct ti_i2c_image_header *)&fw->data[4];
- memcpy (buffer + sizeof(struct ti_i2c_firmware_rec),
+ memcpy(buffer + sizeof(struct ti_i2c_firmware_rec),
&fw->data[4 + sizeof(struct ti_i2c_image_header)],
le16_to_cpu(img_header->Length));
cs = (__u8)(cs + buffer[i]);
}
- kfree (buffer);
+ kfree(buffer);
- // Build new header
+ /* Build new header */
i2c_header = (struct ti_i2c_desc *)header;
firmware_rec = (struct ti_i2c_firmware_rec*)i2c_header->Data;
-
+
i2c_header->Type = I2C_DESC_TYPE_FIRMWARE_BLANK;
i2c_header->Size = (__u16)buffer_size;
i2c_header->CheckSum = cs;
}
/* Try to figure out what type of I2c we have */
-static int TIGetI2cTypeInBootMode (struct edgeport_serial *serial)
+static int i2c_type_bootmode(struct edgeport_serial *serial)
{
int status;
__u8 data;
-
- // Try to read type 2
- status = TIReadVendorRequestSync (serial->serial->dev,
- UMPC_MEMORY_READ, // Request
- DTK_ADDR_SPACE_I2C_TYPE_II, // wValue (Address type)
- 0, // wIndex
- &data, // TransferBuffer
- 0x01); // TransferBufferLength
+
+ /* Try to read type 2 */
+ status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ,
+ DTK_ADDR_SPACE_I2C_TYPE_II, 0, &data, 0x01);
if (status)
- dbg ("%s - read 2 status error = %d", __func__, status);
+ dbg("%s - read 2 status error = %d", __func__, status);
else
- dbg ("%s - read 2 data = 0x%x", __func__, data);
+ dbg("%s - read 2 data = 0x%x", __func__, data);
if ((!status) && (data == UMP5152 || data == UMP3410)) {
- dbg ("%s - ROM_TYPE_II", __func__);
+ dbg("%s - ROM_TYPE_II", __func__);
serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
return 0;
}
- // Try to read type 3
- status = TIReadVendorRequestSync (serial->serial->dev,
- UMPC_MEMORY_READ, // Request
- DTK_ADDR_SPACE_I2C_TYPE_III, // wValue (Address type)
- 0, // wIndex
- &data, // TransferBuffer
- 0x01); // TransferBufferLength
+ /* Try to read type 3 */
+ status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ,
+ DTK_ADDR_SPACE_I2C_TYPE_III, 0, &data, 0x01);
if (status)
- dbg ("%s - read 3 status error = %d", __func__, status);
+ dbg("%s - read 3 status error = %d", __func__, status);
else
- dbg ("%s - read 2 data = 0x%x", __func__, data);
+ dbg("%s - read 2 data = 0x%x", __func__, data);
if ((!status) && (data == UMP5152 || data == UMP3410)) {
- dbg ("%s - ROM_TYPE_III", __func__);
+ dbg("%s - ROM_TYPE_III", __func__);
serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_III;
return 0;
}
- dbg ("%s - Unknown", __func__);
+ dbg("%s - Unknown", __func__);
serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
return -ENODEV;
}
-static int TISendBulkTransferSync (struct usb_serial *serial, void *buffer, int length, int *num_sent)
+static int bulk_xfer(struct usb_serial *serial, void *buffer,
+ int length, int *num_sent)
{
int status;
- status = usb_bulk_msg (serial->dev,
- usb_sndbulkpipe(serial->dev,
- serial->port[0]->bulk_out_endpointAddress),
- buffer,
- length,
- num_sent,
- 1000);
+ status = usb_bulk_msg(serial->dev,
+ usb_sndbulkpipe(serial->dev,
+ serial->port[0]->bulk_out_endpointAddress),
+ buffer, length, num_sent, 1000);
return status;
}
/* Download given firmware image to the device (IN BOOT MODE) */
-static int TIDownloadCodeImage (struct edgeport_serial *serial, __u8 *image, int image_length)
+static int download_code(struct edgeport_serial *serial, __u8 *image,
+ int image_length)
{
int status = 0;
int pos;
int transfer;
int done;
- // Transfer firmware image
+ /* Transfer firmware image */
for (pos = 0; pos < image_length; ) {
- // Read the next buffer from file
+ /* Read the next buffer from file */
transfer = image_length - pos;
if (transfer > EDGE_FW_BULK_MAX_PACKET_SIZE)
transfer = EDGE_FW_BULK_MAX_PACKET_SIZE;
- // Transfer data
- status = TISendBulkTransferSync (serial->serial, &image[pos], transfer, &done);
+ /* Transfer data */
+ status = bulk_xfer(serial->serial, &image[pos],
+ transfer, &done);
if (status)
break;
- // Advance buffer pointer
+ /* Advance buffer pointer */
pos += done;
}
return status;
}
-// FIXME!!!
-static int TIConfigureBootDevice (struct usb_device *dev)
+/* FIXME!!! */
+static int config_boot_dev(struct usb_device *dev)
{
return 0;
}
+static int ti_cpu_rev(struct edge_ti_manuf_descriptor *desc)
+{
+ return TI_GET_CPU_REVISION(desc->CpuRev_BoardRev);
+}
+
/**
* DownloadTIFirmware - Download run-time operating firmware to the TI5052
- *
+ *
* This routine downloads the main operating code into the TI5052, using the
* boot code already burned into E2PROM or ROM.
*/
-static int TIDownloadFirmware (struct edgeport_serial *serial)
+static int download_fw(struct edgeport_serial *serial)
{
struct device *dev = &serial->serial->dev->dev;
int status = 0;
/* Default to type 2 i2c */
serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
- status = TIChooseConfiguration (serial->serial->dev);
+ status = choose_config(serial->serial->dev);
if (status)
return status;
interface = &serial->serial->interface->cur_altsetting->desc;
if (!interface) {
- dev_err (dev, "%s - no interface set, error!\n", __func__);
+ dev_err(dev, "%s - no interface set, error!\n", __func__);
return -ENODEV;
}
- // Setup initial mode -- the default mode 0 is TI_MODE_CONFIGURING
- // if we have more than one endpoint we are definitely in download mode
+ /*
+ * Setup initial mode -- the default mode 0 is TI_MODE_CONFIGURING
+ * if we have more than one endpoint we are definitely in download
+ * mode
+ */
if (interface->bNumEndpoints > 1)
serial->product_info.TiMode = TI_MODE_DOWNLOAD;
else
- // Otherwise we will remain in configuring mode
+ /* Otherwise we will remain in configuring mode */
serial->product_info.TiMode = TI_MODE_CONFIGURING;
/********************************************************************/
dbg("%s - RUNNING IN DOWNLOAD MODE", __func__);
- status = TiValidateI2cImage (serial);
+ status = check_i2c_image(serial);
if (status) {
dbg("%s - DOWNLOAD MODE -- BAD I2C", __func__);
return status;
}
-
+
/* Validate Hardware version number
* Read Manufacturing Descriptor from TI Based Edgeport
*/
- ti_manuf_desc = kmalloc (sizeof (*ti_manuf_desc), GFP_KERNEL);
+ ti_manuf_desc = kmalloc(sizeof(*ti_manuf_desc), GFP_KERNEL);
if (!ti_manuf_desc) {
- dev_err (dev, "%s - out of memory.\n", __func__);
+ dev_err(dev, "%s - out of memory.\n", __func__);
return -ENOMEM;
}
- status = TIReadManufDescriptor (serial, (__u8 *)ti_manuf_desc);
+ status = get_manuf_info(serial, (__u8 *)ti_manuf_desc);
if (status) {
- kfree (ti_manuf_desc);
+ kfree(ti_manuf_desc);
return status;
}
- // Check version number of ION descriptor
- if (!ignore_cpu_rev && TI_GET_CPU_REVISION(ti_manuf_desc->CpuRev_BoardRev) < 2) {
- dbg ( "%s - Wrong CPU Rev %d (Must be 2)", __func__,
- TI_GET_CPU_REVISION(ti_manuf_desc->CpuRev_BoardRev));
- kfree (ti_manuf_desc);
- return -EINVAL;
- }
+ /* Check version number of ION descriptor */
+ if (!ignore_cpu_rev && ti_cpu_rev(ti_manuf_desc) < 2) {
+ dbg("%s - Wrong CPU Rev %d (Must be 2)",
+ __func__, ti_cpu_rev(ti_manuf_desc));
+ kfree(ti_manuf_desc);
+ return -EINVAL;
+ }
- rom_desc = kmalloc (sizeof (*rom_desc), GFP_KERNEL);
+ rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
if (!rom_desc) {
- dev_err (dev, "%s - out of memory.\n", __func__);
- kfree (ti_manuf_desc);
+ dev_err(dev, "%s - out of memory.\n", __func__);
+ kfree(ti_manuf_desc);
return -ENOMEM;
}
- // Search for type 2 record (firmware record)
- if ((start_address = TIGetDescriptorAddress (serial, I2C_DESC_TYPE_FIRMWARE_BASIC, rom_desc)) != 0) {
+ /* Search for type 2 record (firmware record) */
+ start_address = get_descriptor_addr(serial,
+ I2C_DESC_TYPE_FIRMWARE_BASIC, rom_desc);
+ if (start_address != 0) {
struct ti_i2c_firmware_rec *firmware_version;
__u8 record;
- dbg ("%s - Found Type FIRMWARE (Type 2) record", __func__);
+ dbg("%s - Found Type FIRMWARE (Type 2) record",
+ __func__);
- firmware_version = kmalloc (sizeof (*firmware_version), GFP_KERNEL);
+ firmware_version = kmalloc(sizeof(*firmware_version),
+ GFP_KERNEL);
if (!firmware_version) {
- dev_err (dev, "%s - out of memory.\n", __func__);
- kfree (rom_desc);
- kfree (ti_manuf_desc);
+ dev_err(dev, "%s - out of memory.\n", __func__);
+ kfree(rom_desc);
+ kfree(ti_manuf_desc);
return -ENOMEM;
}
- // Validate version number
- // Read the descriptor data
- status = TIReadRom (serial,
- start_address+sizeof(struct ti_i2c_desc),
+ /* Validate version number
+ * Read the descriptor data
+ */
+ status = read_rom(serial, start_address +
+ sizeof(struct ti_i2c_desc),
sizeof(struct ti_i2c_firmware_rec),
(__u8 *)firmware_version);
if (status) {
- kfree (firmware_version);
- kfree (rom_desc);
- kfree (ti_manuf_desc);
+ kfree(firmware_version);
+ kfree(rom_desc);
+ kfree(ti_manuf_desc);
return status;
}
- // Check version number of download with current version in I2c
- download_cur_ver = (firmware_version->Ver_Major << 8) +
+ /* Check version number of download with current
+ version in I2c */
+ download_cur_ver = (firmware_version->Ver_Major << 8) +
(firmware_version->Ver_Minor);
download_new_ver = (OperationalMajorVersion << 8) +
(OperationalMinorVersion);
- dbg ("%s - >>>Firmware Versions Device %d.%d Driver %d.%d",
- __func__,
- firmware_version->Ver_Major,
- firmware_version->Ver_Minor,
- OperationalMajorVersion,
- OperationalMinorVersion);
+ dbg("%s - >> FW Versions Device %d.%d Driver %d.%d",
+ __func__,
+ firmware_version->Ver_Major,
+ firmware_version->Ver_Minor,
+ OperationalMajorVersion,
+ OperationalMinorVersion);
- // Check if we have an old version in the I2C and update if necessary
+ /* Check if we have an old version in the I2C and
+ update if necessary */
if (download_cur_ver != download_new_ver) {
- dbg ("%s - Update I2C Download from %d.%d to %d.%d",
- __func__,
- firmware_version->Ver_Major,
- firmware_version->Ver_Minor,
- OperationalMajorVersion,
- OperationalMinorVersion);
-
- // In order to update the I2C firmware we must change the type 2 record to type 0xF2.
- // This will force the UMP to come up in Boot Mode. Then while in boot mode, the driver
- // will download the latest firmware (padded to 15.5k) into the UMP ram.
- // And finally when the device comes back up in download mode the driver will cause
- // the new firmware to be copied from the UMP Ram to I2C and the firmware will update
- // the record type from 0xf2 to 0x02.
-
+ dbg("%s - Update I2C dld from %d.%d to %d.%d",
+ __func__,
+ firmware_version->Ver_Major,
+ firmware_version->Ver_Minor,
+ OperationalMajorVersion,
+ OperationalMinorVersion);
+
+ /* In order to update the I2C firmware we must
+ * change the type 2 record to type 0xF2. This
+ * will force the UMP to come up in Boot Mode.
+ * Then while in boot mode, the driver will
+ * download the latest firmware (padded to
+ * 15.5k) into the UMP ram. Finally when the
+ * device comes back up in download mode the
+ * driver will cause the new firmware to be
+ * copied from the UMP Ram to I2C and the
+ * firmware will update the record type from
+ * 0xf2 to 0x02.
+ */
record = I2C_DESC_TYPE_FIRMWARE_BLANK;
- // Change the I2C Firmware record type to 0xf2 to trigger an update
- status = TIWriteRom (serial,
- start_address,
- sizeof(record),
- &record);
+ /* Change the I2C Firmware record type to
+ 0xf2 to trigger an update */
+ status = write_rom(serial, start_address,
+ sizeof(record), &record);
if (status) {
- kfree (firmware_version);
- kfree (rom_desc);
- kfree (ti_manuf_desc);
+ kfree(firmware_version);
+ kfree(rom_desc);
+ kfree(ti_manuf_desc);
return status;
}
- // verify the write -- must do this in order for write to
- // complete before we do the hardware reset
- status = TIReadRom (serial,
+ /* verify the write -- must do this in order
+ * for write to complete before we do the
+ * hardware reset
+ */
+ status = read_rom(serial,
start_address,
sizeof(record),
&record);
-
if (status) {
- kfree (firmware_version);
- kfree (rom_desc);
- kfree (ti_manuf_desc);
+ kfree(firmware_version);
+ kfree(rom_desc);
+ kfree(ti_manuf_desc);
return status;
}
if (record != I2C_DESC_TYPE_FIRMWARE_BLANK) {
- dev_err (dev, "%s - error resetting device\n", __func__);
- kfree (firmware_version);
- kfree (rom_desc);
- kfree (ti_manuf_desc);
+ dev_err(dev,
+ "%s - error resetting device\n",
+ __func__);
+ kfree(firmware_version);
+ kfree(rom_desc);
+ kfree(ti_manuf_desc);
return -ENODEV;
}
- dbg ("%s - HARDWARE RESET", __func__);
+ dbg("%s - HARDWARE RESET", __func__);
- // Reset UMP -- Back to BOOT MODE
- status = TISendVendorRequestSync (serial->serial->dev,
- UMPC_HARDWARE_RESET, // Request
- 0, // wValue
- 0, // wIndex
- NULL, // TransferBuffer
- 0); // TransferBufferLength
+ /* Reset UMP -- Back to BOOT MODE */
+ status = ti_vsend_sync(serial->serial->dev,
+ UMPC_HARDWARE_RESET,
+ 0, 0, NULL, 0);
- dbg ( "%s - HARDWARE RESET return %d", __func__, status);
+ dbg("%s - HARDWARE RESET return %d",
+ __func__, status);
/* return an error on purpose. */
- kfree (firmware_version);
- kfree (rom_desc);
- kfree (ti_manuf_desc);
+ kfree(firmware_version);
+ kfree(rom_desc);
+ kfree(ti_manuf_desc);
return -ENODEV;
}
- kfree (firmware_version);
+ kfree(firmware_version);
}
- // Search for type 0xF2 record (firmware blank record)
- else if ((start_address = TIGetDescriptorAddress (serial, I2C_DESC_TYPE_FIRMWARE_BLANK, rom_desc)) != 0) {
- #define HEADER_SIZE (sizeof(struct ti_i2c_desc) + sizeof(struct ti_i2c_firmware_rec))
+ /* Search for type 0xF2 record (firmware blank record) */
+ else if ((start_address = get_descriptor_addr(serial, I2C_DESC_TYPE_FIRMWARE_BLANK, rom_desc)) != 0) {
+#define HEADER_SIZE (sizeof(struct ti_i2c_desc) + \
+ sizeof(struct ti_i2c_firmware_rec))
__u8 *header;
__u8 *vheader;
- header = kmalloc (HEADER_SIZE, GFP_KERNEL);
+ header = kmalloc(HEADER_SIZE, GFP_KERNEL);
if (!header) {
- dev_err (dev, "%s - out of memory.\n", __func__);
- kfree (rom_desc);
- kfree (ti_manuf_desc);
+ dev_err(dev, "%s - out of memory.\n", __func__);
+ kfree(rom_desc);
+ kfree(ti_manuf_desc);
return -ENOMEM;
}
-
- vheader = kmalloc (HEADER_SIZE, GFP_KERNEL);
+
+ vheader = kmalloc(HEADER_SIZE, GFP_KERNEL);
if (!vheader) {
- dev_err (dev, "%s - out of memory.\n", __func__);
- kfree (header);
- kfree (rom_desc);
- kfree (ti_manuf_desc);
+ dev_err(dev, "%s - out of memory.\n", __func__);
+ kfree(header);
+ kfree(rom_desc);
+ kfree(ti_manuf_desc);
return -ENOMEM;
}
-
- dbg ("%s - Found Type BLANK FIRMWARE (Type F2) record", __func__);
-
- // In order to update the I2C firmware we must change the type 2 record to type 0xF2.
- // This will force the UMP to come up in Boot Mode. Then while in boot mode, the driver
- // will download the latest firmware (padded to 15.5k) into the UMP ram.
- // And finally when the device comes back up in download mode the driver will cause
- // the new firmware to be copied from the UMP Ram to I2C and the firmware will update
- // the record type from 0xf2 to 0x02.
- status = BuildI2CFirmwareHeader(header, dev);
+
+ dbg("%s - Found Type BLANK FIRMWARE (Type F2) record",
+ __func__);
+
+ /*
+ * In order to update the I2C firmware we must change
+ * the type 2 record to type 0xF2. This will force the
+ * UMP to come up in Boot Mode. Then while in boot
+ * mode, the driver will download the latest firmware
+ * (padded to 15.5k) into the UMP ram. Finally when the
+ * device comes back up in download mode the driver
+ * will cause the new firmware to be copied from the
+ * UMP Ram to I2C and the firmware will update the
+ * record type from 0xf2 to 0x02.
+ */
+ status = build_i2c_fw_hdr(header, dev);
if (status) {
- kfree (vheader);
- kfree (header);
- kfree (rom_desc);
- kfree (ti_manuf_desc);
+ kfree(vheader);
+ kfree(header);
+ kfree(rom_desc);
+ kfree(ti_manuf_desc);
return status;
}
- // Update I2C with type 0xf2 record with correct size and checksum
- status = TIWriteRom (serial,
+ /* Update I2C with type 0xf2 record with correct
+ size and checksum */
+ status = write_rom(serial,
start_address,
HEADER_SIZE,
header);
if (status) {
- kfree (vheader);
- kfree (header);
- kfree (rom_desc);
- kfree (ti_manuf_desc);
+ kfree(vheader);
+ kfree(header);
+ kfree(rom_desc);
+ kfree(ti_manuf_desc);
return status;
}
- // verify the write -- must do this in order for write to
- // complete before we do the hardware reset
- status = TIReadRom (serial,
- start_address,
- HEADER_SIZE,
- vheader);
+ /* verify the write -- must do this in order for
+ write to complete before we do the hardware reset */
+ status = read_rom(serial, start_address,
+ HEADER_SIZE, vheader);
if (status) {
- dbg ("%s - can't read header back", __func__);
- kfree (vheader);
- kfree (header);
- kfree (rom_desc);
- kfree (ti_manuf_desc);
+ dbg("%s - can't read header back", __func__);
+ kfree(vheader);
+ kfree(header);
+ kfree(rom_desc);
+ kfree(ti_manuf_desc);
return status;
}
if (memcmp(vheader, header, HEADER_SIZE)) {
- dbg ("%s - write download record failed", __func__);
- kfree (vheader);
- kfree (header);
- kfree (rom_desc);
- kfree (ti_manuf_desc);
+ dbg("%s - write download record failed",
+ __func__);
+ kfree(vheader);
+ kfree(header);
+ kfree(rom_desc);
+ kfree(ti_manuf_desc);
return status;
}
- kfree (vheader);
- kfree (header);
+ kfree(vheader);
+ kfree(header);
- dbg ("%s - Start firmware update", __func__);
+ dbg("%s - Start firmware update", __func__);
- // Tell firmware to copy download image into I2C
- status = TISendVendorRequestSync (serial->serial->dev,
- UMPC_COPY_DNLD_TO_I2C, // Request
- 0, // wValue
- 0, // wIndex
- NULL, // TransferBuffer
- 0); // TransferBufferLength
+ /* Tell firmware to copy download image into I2C */
+ status = ti_vsend_sync(serial->serial->dev,
+ UMPC_COPY_DNLD_TO_I2C, 0, 0, NULL, 0);
- dbg ("%s - Update complete 0x%x", __func__, status);
+ dbg("%s - Update complete 0x%x", __func__, status);
if (status) {
- dev_err (dev, "%s - UMPC_COPY_DNLD_TO_I2C failed\n", __func__);
- kfree (rom_desc);
- kfree (ti_manuf_desc);
+ dev_err(dev,
+ "%s - UMPC_COPY_DNLD_TO_I2C failed\n",
+ __func__);
+ kfree(rom_desc);
+ kfree(ti_manuf_desc);
return status;
}
}
// The device is running the download code
- kfree (rom_desc);
- kfree (ti_manuf_desc);
+ kfree(rom_desc);
+ kfree(ti_manuf_desc);
return 0;
}
/********************************************************************/
dbg("%s - RUNNING IN BOOT MODE", __func__);
- // Configure the TI device so we can use the BULK pipes for download
- status = TIConfigureBootDevice (serial->serial->dev);
+ /* Configure the TI device so we can use the BULK pipes for download */
+ status = config_boot_dev(serial->serial->dev);
if (status)
return status;
- if (le16_to_cpu(serial->serial->dev->descriptor.idVendor) != USB_VENDOR_ID_ION) {
- dbg ("%s - VID = 0x%x", __func__,
+ if (le16_to_cpu(serial->serial->dev->descriptor.idVendor)
+ != USB_VENDOR_ID_ION) {
+ dbg("%s - VID = 0x%x", __func__,
le16_to_cpu(serial->serial->dev->descriptor.idVendor));
serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
- goto StayInBootMode;
- }
-
- // We have an ION device (I2c Must be programmed)
- // Determine I2C image type
- if (TIGetI2cTypeInBootMode(serial)) {
- goto StayInBootMode;
+ goto stayinbootmode;
}
- // Registry variable set?
- if (TIStayInBootMode) {
- dbg ("%s - TIStayInBootMode", __func__);
- goto StayInBootMode;
- }
+ /* We have an ION device (I2c Must be programmed)
+ Determine I2C image type */
+ if (i2c_type_bootmode(serial))
+ goto stayinbootmode;
- // Check for ION Vendor ID and that the I2C is valid
- if (!TiValidateI2cImage(serial)) {
+ /* Check for ION Vendor ID and that the I2C is valid */
+ if (!check_i2c_image(serial)) {
struct ti_i2c_image_header *header;
int i;
__u8 cs = 0;
/* Validate Hardware version number
* Read Manufacturing Descriptor from TI Based Edgeport
*/
- ti_manuf_desc = kmalloc (sizeof (*ti_manuf_desc), GFP_KERNEL);
+ ti_manuf_desc = kmalloc(sizeof(*ti_manuf_desc), GFP_KERNEL);
if (!ti_manuf_desc) {
- dev_err (dev, "%s - out of memory.\n", __func__);
+ dev_err(dev, "%s - out of memory.\n", __func__);
return -ENOMEM;
}
- status = TIReadManufDescriptor (serial, (__u8 *)ti_manuf_desc);
+ status = get_manuf_info(serial, (__u8 *)ti_manuf_desc);
if (status) {
- kfree (ti_manuf_desc);
- goto StayInBootMode;
+ kfree(ti_manuf_desc);
+ goto stayinbootmode;
}
- // Check for version 2
- if (!ignore_cpu_rev && TI_GET_CPU_REVISION(ti_manuf_desc->CpuRev_BoardRev) < 2) {
- dbg ("%s - Wrong CPU Rev %d (Must be 2)", __func__,
- TI_GET_CPU_REVISION(ti_manuf_desc->CpuRev_BoardRev));
- kfree (ti_manuf_desc);
- goto StayInBootMode;
+ /* Check for version 2 */
+ if (!ignore_cpu_rev && ti_cpu_rev(ti_manuf_desc) < 2) {
+ dbg("%s - Wrong CPU Rev %d (Must be 2)",
+ __func__, ti_cpu_rev(ti_manuf_desc));
+ kfree(ti_manuf_desc);
+ goto stayinbootmode;
}
- kfree (ti_manuf_desc);
+ kfree(ti_manuf_desc);
- // In order to update the I2C firmware we must change the type 2 record to type 0xF2.
- // This will force the UMP to come up in Boot Mode. Then while in boot mode, the driver
- // will download the latest firmware (padded to 15.5k) into the UMP ram.
- // And finally when the device comes back up in download mode the driver will cause
- // the new firmware to be copied from the UMP Ram to I2C and the firmware will update
- // the record type from 0xf2 to 0x02.
-
/*
+ * In order to update the I2C firmware we must change the type
+ * 2 record to type 0xF2. This will force the UMP to come up
+ * in Boot Mode. Then while in boot mode, the driver will
+ * download the latest firmware (padded to 15.5k) into the
+ * UMP ram. Finally when the device comes back up in download
+ * mode the driver will cause the new firmware to be copied
+ * from the UMP Ram to I2C and the firmware will update the
+ * record type from 0xf2 to 0x02.
+ *
* Do we really have to copy the whole firmware image,
* or could we do this in place!
*/
- // Allocate a 15.5k buffer + 3 byte header
- buffer_size = (((1024 * 16) - 512) + sizeof(struct ti_i2c_image_header));
- buffer = kmalloc (buffer_size, GFP_KERNEL);
+ /* Allocate a 15.5k buffer + 3 byte header */
+ buffer_size = (((1024 * 16) - 512) +
+ sizeof(struct ti_i2c_image_header));
+ buffer = kmalloc(buffer_size, GFP_KERNEL);
if (!buffer) {
- dev_err (dev, "%s - out of memory\n", __func__);
+ dev_err(dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
-
- // Initialize the buffer to 0xff (pad the buffer)
- memset (buffer, 0xff, buffer_size);
+
+ /* Initialize the buffer to 0xff (pad the buffer) */
+ memset(buffer, 0xff, buffer_size);
err = request_firmware(&fw, fw_name, dev);
if (err) {
memcpy(buffer, &fw->data[4], fw->size - 4);
release_firmware(fw);
- for(i = sizeof(struct ti_i2c_image_header); i < buffer_size; i++) {
+ for (i = sizeof(struct ti_i2c_image_header);
+ i < buffer_size; i++) {
cs = (__u8)(cs + buffer[i]);
}
-
+
header = (struct ti_i2c_image_header *)buffer;
-
- // update length and checksum after padding
- header->Length = cpu_to_le16((__u16)(buffer_size - sizeof(struct ti_i2c_image_header)));
+
+ /* update length and checksum after padding */
+ header->Length = cpu_to_le16((__u16)(buffer_size -
+ sizeof(struct ti_i2c_image_header)));
header->CheckSum = cs;
- // Download the operational code
- dbg ("%s - Downloading operational code image (TI UMP)", __func__);
- status = TIDownloadCodeImage (serial, buffer, buffer_size);
+ /* Download the operational code */
+ dbg("%s - Downloading operational code image (TI UMP)",
+ __func__);
+ status = download_code(serial, buffer, buffer_size);
- kfree (buffer);
+ kfree(buffer);
if (status) {
- dbg ("%s - Error downloading operational code image", __func__);
+ dbg("%s - Error downloading operational code image",
+ __func__);
return status;
}
- // Device will reboot
+ /* Device will reboot */
serial->product_info.TiMode = TI_MODE_TRANSITIONING;
- dbg ("%s - Download successful -- Device rebooting...", __func__);
+ dbg("%s - Download successful -- Device rebooting...",
+ __func__);
/* return an error on purpose */
return -ENODEV;
}
-StayInBootMode:
- // Eprom is invalid or blank stay in boot mode
+stayinbootmode:
+ /* Eprom is invalid or blank stay in boot mode */
dbg("%s - STAYING IN BOOT MODE", __func__);
serial->product_info.TiMode = TI_MODE_BOOT;
}
-static int TISetDtr (struct edgeport_port *port)
+static int ti_do_config(struct edgeport_port *port, int feature, int on)
{
int port_number = port->port->number - port->port->serial->minor;
-
- dbg ("%s", __func__);
- port->shadow_mcr |= MCR_DTR;
-
- return TIWriteCommandSync (port->port->serial->dev,
- UMPC_SET_CLR_DTR,
- (__u8)(UMPM_UART1_PORT + port_number),
- 1, /* set */
- NULL,
- 0);
+ on = !!on; /* 1 or 0 not bitmask */
+ return send_cmd(port->port->serial->dev,
+ feature, (__u8)(UMPM_UART1_PORT + port_number),
+ on, NULL, 0);
}
-static int TIClearDtr (struct edgeport_port *port)
-{
- int port_number = port->port->number - port->port->serial->minor;
-
- dbg ("%s", __func__);
- port->shadow_mcr &= ~MCR_DTR;
- return TIWriteCommandSync (port->port->serial->dev,
- UMPC_SET_CLR_DTR,
- (__u8)(UMPM_UART1_PORT + port_number),
- 0, /* clear */
- NULL,
- 0);
-}
-
-static int TISetRts (struct edgeport_port *port)
-{
- int port_number = port->port->number - port->port->serial->minor;
-
- dbg ("%s", __func__);
- port->shadow_mcr |= MCR_RTS;
-
- return TIWriteCommandSync (port->port->serial->dev,
- UMPC_SET_CLR_RTS,
- (__u8)(UMPM_UART1_PORT + port_number),
- 1, /* set */
- NULL,
- 0);
-}
-
-static int TIClearRts (struct edgeport_port *port)
-{
- int port_number = port->port->number - port->port->serial->minor;
-
- dbg ("%s", __func__);
- port->shadow_mcr &= ~MCR_RTS;
-
- return TIWriteCommandSync (port->port->serial->dev,
- UMPC_SET_CLR_RTS,
- (__u8)(UMPM_UART1_PORT + port_number),
- 0, /* clear */
- NULL,
- 0);
-}
-
-static int TISetLoopBack (struct edgeport_port *port)
-{
- int port_number = port->port->number - port->port->serial->minor;
-
- dbg ("%s", __func__);
-
- return TIWriteCommandSync (port->port->serial->dev,
- UMPC_SET_CLR_LOOPBACK,
- (__u8)(UMPM_UART1_PORT + port_number),
- 1, /* set */
- NULL,
- 0);
-}
-
-static int TIClearLoopBack (struct edgeport_port *port)
-{
- int port_number = port->port->number - port->port->serial->minor;
-
- dbg ("%s", __func__);
-
- return TIWriteCommandSync (port->port->serial->dev,
- UMPC_SET_CLR_LOOPBACK,
- (__u8)(UMPM_UART1_PORT + port_number),
- 0, /* clear */
- NULL,
- 0);
-}
-
-static int TISetBreak (struct edgeport_port *port)
-{
- int port_number = port->port->number - port->port->serial->minor;
-
- dbg ("%s", __func__);
-
- return TIWriteCommandSync (port->port->serial->dev,
- UMPC_SET_CLR_BREAK,
- (__u8)(UMPM_UART1_PORT + port_number),
- 1, /* set */
- NULL,
- 0);
-}
-
-static int TIClearBreak (struct edgeport_port *port)
-{
- int port_number = port->port->number - port->port->serial->minor;
-
- dbg ("%s", __func__);
-
- return TIWriteCommandSync (port->port->serial->dev,
- UMPC_SET_CLR_BREAK,
- (__u8)(UMPM_UART1_PORT + port_number),
- 0, /* clear */
- NULL,
- 0);
-}
-
-static int TIRestoreMCR (struct edgeport_port *port, __u8 mcr)
+static int restore_mcr(struct edgeport_port *port, __u8 mcr)
{
int status = 0;
- dbg ("%s - %x", __func__, mcr);
-
- if (mcr & MCR_DTR)
- status = TISetDtr (port);
- else
- status = TIClearDtr (port);
+ dbg("%s - %x", __func__, mcr);
+ status = ti_do_config(port, UMPC_SET_CLR_DTR, mcr & MCR_DTR);
if (status)
return status;
-
- if (mcr & MCR_RTS)
- status = TISetRts (port);
- else
- status = TIClearRts (port);
-
+ status = ti_do_config(port, UMPC_SET_CLR_RTS, mcr & MCR_RTS);
if (status)
return status;
-
- if (mcr & MCR_LOOPBACK)
- status = TISetLoopBack (port);
- else
- status = TIClearLoopBack (port);
-
- return status;
+ return ti_do_config(port, UMPC_SET_CLR_LOOPBACK, mcr & MCR_LOOPBACK);
}
-
-
/* Convert TI LSR to standard UART flags */
-static __u8 MapLineStatus (__u8 ti_lsr)
+static __u8 map_line_status(__u8 ti_lsr)
{
__u8 lsr = 0;
MAP_FLAG(UMP_UART_LSR_PE_MASK, LSR_PAR_ERR) /* parity error */
MAP_FLAG(UMP_UART_LSR_FE_MASK, LSR_FRM_ERR) /* framing error */
MAP_FLAG(UMP_UART_LSR_BR_MASK, LSR_BREAK) /* break detected */
- MAP_FLAG(UMP_UART_LSR_RX_MASK, LSR_RX_AVAIL) /* receive data available */
- MAP_FLAG(UMP_UART_LSR_TX_MASK, LSR_TX_EMPTY) /* transmit holding register empty */
+ MAP_FLAG(UMP_UART_LSR_RX_MASK, LSR_RX_AVAIL) /* rx data available */
+ MAP_FLAG(UMP_UART_LSR_TX_MASK, LSR_TX_EMPTY) /* tx hold reg empty */
#undef MAP_FLAG
return lsr;
}
-static void handle_new_msr (struct edgeport_port *edge_port, __u8 msr)
+static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr)
{
struct async_icount *icount;
struct tty_struct *tty;
- dbg ("%s - %02x", __func__, msr);
+ dbg("%s - %02x", __func__, msr);
- if (msr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) {
+ if (msr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR |
+ EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) {
icount = &edge_port->icount;
/* update input line counters */
icount->dcd++;
if (msr & EDGEPORT_MSR_DELTA_RI)
icount->rng++;
- wake_up_interruptible (&edge_port->delta_msr_wait);
+ wake_up_interruptible(&edge_port->delta_msr_wait);
}
/* Save the new modem status */
return;
}
-static void handle_new_lsr (struct edgeport_port *edge_port, int lsr_data, __u8 lsr, __u8 data)
+static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data,
+ __u8 lsr, __u8 data)
{
struct async_icount *icount;
- __u8 new_lsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK));
+ __u8 new_lsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR |
+ LSR_FRM_ERR | LSR_BREAK));
- dbg ("%s - %02x", __func__, new_lsr);
+ dbg("%s - %02x", __func__, new_lsr);
edge_port->shadow_lsr = lsr;
- if (new_lsr & LSR_BREAK) {
+ if (new_lsr & LSR_BREAK)
/*
* Parity and Framing errors only count if they
* occur exclusive of a break being received.
*/
new_lsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK);
- }
/* Place LSR data byte into Rx buffer */
if (lsr_data && edge_port->port->tty)
- edge_tty_recv(&edge_port->port->dev, edge_port->port->tty, &data, 1);
+ edge_tty_recv(&edge_port->port->dev, edge_port->port->tty,
+ &data, 1);
/* update input line counters */
icount = &edge_port->icount;
}
-static void edge_interrupt_callback (struct urb *urb)
+static void edge_interrupt_callback(struct urb *urb)
{
struct edgeport_serial *edge_serial = urb->context;
struct usb_serial_port *port;
}
if (!length) {
- dbg ("%s - no data in urb", __func__);
+ dbg("%s - no data in urb", __func__);
goto exit;
}
-
- usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __func__, length, data);
-
+
+ usb_serial_debug_data(debug, &edge_serial->serial->dev->dev,
+ __func__, length, data);
+
if (length != 2) {
- dbg ("%s - expecting packet of size 2, got %d", __func__, length);
+ dbg("%s - expecting packet of size 2, got %d",
+ __func__, length);
goto exit;
}
- port_number = TIUMP_GET_PORT_FROM_CODE (data[0]);
- function = TIUMP_GET_FUNC_FROM_CODE (data[0]);
- dbg ("%s - port_number %d, function %d, info 0x%x",
+ port_number = TIUMP_GET_PORT_FROM_CODE(data[0]);
+ function = TIUMP_GET_FUNC_FROM_CODE(data[0]);
+ dbg("%s - port_number %d, function %d, info 0x%x",
__func__, port_number, function, data[1]);
port = edge_serial->serial->port[port_number];
edge_port = usb_get_serial_port_data(port);
if (!edge_port) {
- dbg ("%s - edge_port not found", __func__);
+ dbg("%s - edge_port not found", __func__);
return;
}
switch (function) {
case TIUMP_INTERRUPT_CODE_LSR:
- lsr = MapLineStatus(data[1]);
+ lsr = map_line_status(data[1]);
if (lsr & UMP_UART_LSR_DATA_MASK) {
- /* Save the LSR event for bulk read completion routine */
- dbg ("%s - LSR Event Port %u LSR Status = %02x",
+ /* Save the LSR event for bulk read
+ completion routine */
+ dbg("%s - LSR Event Port %u LSR Status = %02x",
__func__, port_number, lsr);
edge_port->lsr_event = 1;
edge_port->lsr_mask = lsr;
} else {
- dbg ("%s - ===== Port %d LSR Status = %02x ======",
+ dbg("%s - ===== Port %d LSR Status = %02x ======",
__func__, port_number, lsr);
- handle_new_lsr (edge_port, 0, lsr, 0);
+ handle_new_lsr(edge_port, 0, lsr, 0);
}
break;
- case TIUMP_INTERRUPT_CODE_MSR: // MSR
+ case TIUMP_INTERRUPT_CODE_MSR: /* MSR */
/* Copy MSR from UMP */
msr = data[1];
- dbg ("%s - ===== Port %u MSR Status = %02x ======\n",
+ dbg("%s - ===== Port %u MSR Status = %02x ======\n",
__func__, port_number, msr);
- handle_new_msr (edge_port, msr);
+ handle_new_msr(edge_port, msr);
break;
default:
- dev_err (&urb->dev->dev, "%s - Unknown Interrupt code from UMP %x\n",
- __func__, data[1]);
+ dev_err(&urb->dev->dev,
+ "%s - Unknown Interrupt code from UMP %x\n",
+ __func__, data[1]);
break;
-
+
}
exit:
- retval = usb_submit_urb (urb, GFP_ATOMIC);
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
- dev_err (&urb->dev->dev, "%s - usb_submit_urb failed with result %d\n",
+ dev_err(&urb->dev->dev,
+ "%s - usb_submit_urb failed with result %d\n",
__func__, retval);
}
-static void edge_bulk_in_callback (struct urb *urb)
+static void edge_bulk_in_callback(struct urb *urb)
{
struct edgeport_port *edge_port = urb->context;
unsigned char *data = urb->transfer_buffer;
__func__, status);
return;
default:
- dev_err (&urb->dev->dev,"%s - nonzero read bulk status received: %d\n",
- __func__, status);
+ dev_err(&urb->dev->dev,
+ "%s - nonzero read bulk status received: %d\n",
+ __func__, status);
}
if (status == -EPIPE)
goto exit;
if (status) {
- dev_err(&urb->dev->dev,"%s - stopping read!\n", __func__);
+ dev_err(&urb->dev->dev, "%s - stopping read!\n", __func__);
return;
}
if (edge_port->lsr_event) {
edge_port->lsr_event = 0;
- dbg ("%s ===== Port %u LSR Status = %02x, Data = %02x ======",
+ dbg("%s ===== Port %u LSR Status = %02x, Data = %02x ======",
__func__, port_number, edge_port->lsr_mask, *data);
- handle_new_lsr (edge_port, 1, edge_port->lsr_mask, *data);
+ handle_new_lsr(edge_port, 1, edge_port->lsr_mask, *data);
/* Adjust buffer length/pointer */
--urb->actual_length;
++data;
tty = edge_port->port->tty;
if (tty && urb->actual_length) {
- usb_serial_debug_data(debug, &edge_port->port->dev, __func__, urb->actual_length, data);
-
- if (edge_port->close_pending) {
- dbg ("%s - close is pending, dropping data on the floor.", __func__);
- } else {
- edge_tty_recv(&edge_port->port->dev, tty, data, urb->actual_length);
- }
+ usb_serial_debug_data(debug, &edge_port->port->dev,
+ __func__, urb->actual_length, data);
+ if (edge_port->close_pending)
+ dbg("%s - close pending, dropping data on the floor",
+ __func__);
+ else
+ edge_tty_recv(&edge_port->port->dev, tty, data,
+ urb->actual_length);
edge_port->icount.rx += urb->actual_length;
}
}
spin_unlock(&edge_port->ep_lock);
if (retval)
- dev_err (&urb->dev->dev, "%s - usb_submit_urb failed with result %d\n",
+ dev_err(&urb->dev->dev,
+ "%s - usb_submit_urb failed with result %d\n",
__func__, retval);
}
-static void edge_tty_recv(struct device *dev, struct tty_struct *tty, unsigned char *data, int length)
+static void edge_tty_recv(struct device *dev, struct tty_struct *tty,
+ unsigned char *data, int length)
{
- int cnt;
-
- do {
- cnt = tty_buffer_request_room(tty, length);
- if (cnt < length) {
- dev_err(dev, "%s - dropping data, %d bytes lost\n",
- __func__, length - cnt);
- if(cnt == 0)
- break;
- }
- tty_insert_flip_string(tty, data, cnt);
- data += cnt;
- length -= cnt;
- } while (length > 0);
+ int queued;
+ tty_buffer_request_room(tty, length);
+ queued = tty_insert_flip_string(tty, data, length);
+ if (queued < length)
+ dev_err(dev, "%s - dropping data, %d bytes lost\n",
+ __func__, length - queued);
tty_flip_buffer_push(tty);
}
-static void edge_bulk_out_callback (struct urb *urb)
+static void edge_bulk_out_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
int status = urb->status;
- dbg ("%s - port %d", __func__, port->number);
+ dbg("%s - port %d", __func__, port->number);
edge_port->ep_write_urb_in_use = 0;
edge_send(port);
}
-static int edge_open (struct usb_serial_port *port, struct file * filp)
+static int edge_open(struct usb_serial_port *port, struct file *filp)
{
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
struct edgeport_serial *edge_serial;
port_number = port->number - port->serial->minor;
switch (port_number) {
- case 0:
- edge_port->uart_base = UMPMEM_BASE_UART1;
- edge_port->dma_address = UMPD_OEDB1_ADDRESS;
- break;
- case 1:
- edge_port->uart_base = UMPMEM_BASE_UART2;
- edge_port->dma_address = UMPD_OEDB2_ADDRESS;
- break;
- default:
- dev_err (&port->dev, "Unknown port number!!!\n");
- return -ENODEV;
+ case 0:
+ edge_port->uart_base = UMPMEM_BASE_UART1;
+ edge_port->dma_address = UMPD_OEDB1_ADDRESS;
+ break;
+ case 1:
+ edge_port->uart_base = UMPMEM_BASE_UART2;
+ edge_port->dma_address = UMPD_OEDB2_ADDRESS;
+ break;
+ default:
+ dev_err(&port->dev, "Unknown port number!!!\n");
+ return -ENODEV;
}
- dbg ("%s - port_number = %d, uart_base = %04x, dma_address = %04x",
- __func__, port_number, edge_port->uart_base, edge_port->dma_address);
+ dbg("%s - port_number = %d, uart_base = %04x, dma_address = %04x",
+ __func__, port_number, edge_port->uart_base,
+ edge_port->dma_address);
dev = port->serial->dev;
- memset (&(edge_port->icount), 0x00, sizeof(edge_port->icount));
- init_waitqueue_head (&edge_port->delta_msr_wait);
+ memset(&(edge_port->icount), 0x00, sizeof(edge_port->icount));
+ init_waitqueue_head(&edge_port->delta_msr_wait);
/* turn off loopback */
- status = TIClearLoopBack (edge_port);
+ status = ti_do_config(edge_port, UMPC_SET_CLR_LOOPBACK, 0);
if (status) {
- dev_err(&port->dev,"%s - cannot send clear loopback command, %d\n",
+ dev_err(&port->dev,
+ "%s - cannot send clear loopback command, %d\n",
__func__, status);
return status;
}
-
+
/* set up the port settings */
- edge_set_termios (port, port->tty->termios);
+ edge_set_termios(port, port->tty->termios);
/* open up the port */
/* milliseconds to timeout for DMA transfer */
transaction_timeout = 2;
- edge_port->ump_read_timeout = max (20, ((transaction_timeout * 3) / 2) );
+ edge_port->ump_read_timeout =
+ max(20, ((transaction_timeout * 3) / 2));
- // milliseconds to timeout for DMA transfer
- open_settings = (u8)(UMP_DMA_MODE_CONTINOUS |
- UMP_PIPE_TRANS_TIMEOUT_ENA |
+ /* milliseconds to timeout for DMA transfer */
+ open_settings = (u8)(UMP_DMA_MODE_CONTINOUS |
+ UMP_PIPE_TRANS_TIMEOUT_ENA |
(transaction_timeout << 2));
- dbg ("%s - Sending UMPC_OPEN_PORT", __func__);
+ dbg("%s - Sending UMPC_OPEN_PORT", __func__);
/* Tell TI to open and start the port */
- status = TIWriteCommandSync (dev,
- UMPC_OPEN_PORT,
- (u8)(UMPM_UART1_PORT + port_number),
- open_settings,
- NULL,
- 0);
+ status = send_cmd(dev, UMPC_OPEN_PORT,
+ (u8)(UMPM_UART1_PORT + port_number), open_settings, NULL, 0);
if (status) {
- dev_err(&port->dev,"%s - cannot send open command, %d\n", __func__, status);
+ dev_err(&port->dev, "%s - cannot send open command, %d\n",
+ __func__, status);
return status;
}
/* Start the DMA? */
- status = TIWriteCommandSync (dev,
- UMPC_START_PORT,
- (u8)(UMPM_UART1_PORT + port_number),
- 0,
- NULL,
- 0);
+ status = send_cmd(dev, UMPC_START_PORT,
+ (u8)(UMPM_UART1_PORT + port_number), 0, NULL, 0);
if (status) {
- dev_err(&port->dev,"%s - cannot send start DMA command, %d\n", __func__, status);
+ dev_err(&port->dev, "%s - cannot send start DMA command, %d\n",
+ __func__, status);
return status;
}
/* Clear TX and RX buffers in UMP */
- status = TIPurgeDataSync (port, UMP_PORT_DIR_OUT | UMP_PORT_DIR_IN);
+ status = purge_port(port, UMP_PORT_DIR_OUT | UMP_PORT_DIR_IN);
if (status) {
- dev_err(&port->dev,"%s - cannot send clear buffers command, %d\n", __func__, status);
+ dev_err(&port->dev,
+ "%s - cannot send clear buffers command, %d\n",
+ __func__, status);
return status;
}
/* Read Initial MSR */
- status = TIReadVendorRequestSync (dev,
- UMPC_READ_MSR, // Request
- 0, // wValue
- (__u16)(UMPM_UART1_PORT + port_number), // wIndex (Address)
- &edge_port->shadow_msr, // TransferBuffer
- 1); // TransferBufferLength
+ status = ti_vread_sync(dev, UMPC_READ_MSR, 0,
+ (__u16)(UMPM_UART1_PORT + port_number),
+ &edge_port->shadow_msr, 1);
if (status) {
- dev_err(&port->dev,"%s - cannot send read MSR command, %d\n", __func__, status);
+ dev_err(&port->dev, "%s - cannot send read MSR command, %d\n",
+ __func__, status);
return status;
}
- dbg ("ShadowMSR 0x%X", edge_port->shadow_msr);
-
+ dbg("ShadowMSR 0x%X", edge_port->shadow_msr);
+
/* Set Initial MCR */
edge_port->shadow_mcr = MCR_RTS | MCR_DTR;
- dbg ("ShadowMCR 0x%X", edge_port->shadow_mcr);
+ dbg("ShadowMCR 0x%X", edge_port->shadow_mcr);
edge_serial = edge_port->edge_serial;
if (mutex_lock_interruptible(&edge_serial->es_lock))
return -ERESTARTSYS;
if (edge_serial->num_ports_open == 0) {
- /* we are the first port to be opened, let's post the interrupt urb */
+ /* we are the first port to open, post the interrupt urb */
urb = edge_serial->serial->port[0]->interrupt_in_urb;
if (!urb) {
- dev_err (&port->dev, "%s - no interrupt urb present, exiting\n", __func__);
+ dev_err(&port->dev,
+ "%s - no interrupt urb present, exiting\n",
+ __func__);
status = -EINVAL;
goto release_es_lock;
}
urb->complete = edge_interrupt_callback;
urb->context = edge_serial;
urb->dev = dev;
- status = usb_submit_urb (urb, GFP_KERNEL);
+ status = usb_submit_urb(urb, GFP_KERNEL);
if (status) {
- dev_err (&port->dev, "%s - usb_submit_urb failed with value %d\n", __func__, status);
+ dev_err(&port->dev,
+ "%s - usb_submit_urb failed with value %d\n",
+ __func__, status);
goto release_es_lock;
}
}
* reset the data toggle on the bulk endpoints to work around bug in
* host controllers where things get out of sync some times
*/
- usb_clear_halt (dev, port->write_urb->pipe);
- usb_clear_halt (dev, port->read_urb->pipe);
+ usb_clear_halt(dev, port->write_urb->pipe);
+ usb_clear_halt(dev, port->read_urb->pipe);
/* start up our bulk read urb */
urb = port->read_urb;
if (!urb) {
- dev_err (&port->dev, "%s - no read urb present, exiting\n", __func__);
+ dev_err(&port->dev, "%s - no read urb present, exiting\n",
+ __func__);
status = -EINVAL;
goto unlink_int_urb;
}
urb->complete = edge_bulk_in_callback;
urb->context = edge_port;
urb->dev = dev;
- status = usb_submit_urb (urb, GFP_KERNEL);
+ status = usb_submit_urb(urb, GFP_KERNEL);
if (status) {
- dev_err (&port->dev, "%s - read bulk usb_submit_urb failed with value %d\n", __func__, status);
+ dev_err(&port->dev,
+ "%s - read bulk usb_submit_urb failed with value %d\n",
+ __func__, status);
goto unlink_int_urb;
}
return status;
}
-static void edge_close (struct usb_serial_port *port, struct file *filp)
+static void edge_close(struct usb_serial_port *port, struct file *filp)
{
struct edgeport_serial *edge_serial;
struct edgeport_port *edge_port;
int status;
dbg("%s - port %d", __func__, port->number);
-
+
edge_serial = usb_get_serial_data(port->serial);
edge_port = usb_get_serial_port_data(port);
- if ((edge_serial == NULL) || (edge_port == NULL))
+ if (edge_serial == NULL || edge_port == NULL)
return;
-
- /* The bulkreadcompletion routine will check
+
+ /* The bulkreadcompletion routine will check
* this flag and dump add read data */
edge_port->close_pending = 1;
/* chase the port close and flush */
- TIChasePort (edge_port, (HZ*closing_wait)/100, 1);
+ chase_port(edge_port, (HZ * closing_wait) / 100, 1);
usb_kill_urb(port->read_urb);
usb_kill_urb(port->write_urb);
* send a close port command to it */
dbg("%s - send umpc_close_port", __func__);
port_number = port->number - port->serial->minor;
- status = TIWriteCommandSync (port->serial->dev,
+ status = send_cmd(port->serial->dev,
UMPC_CLOSE_PORT,
(__u8)(UMPM_UART1_PORT + port_number),
0,
dbg("%s - exited", __func__);
}
-static int edge_write (struct usb_serial_port *port, const unsigned char *data, int count)
+static int edge_write(struct usb_serial_port *port, const unsigned char *data,
+ int count)
{
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
unsigned long flags;
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
- usb_serial_debug_data(debug, &port->dev, __func__, count, port->write_urb->transfer_buffer);
+ usb_serial_debug_data(debug, &port->dev, __func__, count,
+ port->write_urb->transfer_buffer);
/* set up our urb */
- usb_fill_bulk_urb (port->write_urb, port->serial->dev,
- usb_sndbulkpipe (port->serial->dev,
+ usb_fill_bulk_urb(port->write_urb, port->serial->dev,
+ usb_sndbulkpipe(port->serial->dev,
port->bulk_out_endpointAddress),
port->write_urb->transfer_buffer, count,
edge_bulk_out_callback,
/* send the data out the bulk port */
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
- dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __func__, result);
+ dev_err(&port->dev,
+ "%s - failed submitting write urb, error %d\n",
+ __func__, result);
edge_port->ep_write_urb_in_use = 0;
- // TODO: reschedule edge_send
- } else {
+ /* TODO: reschedule edge_send */
+ } else
edge_port->icount.tx += count;
- }
/* wakeup any process waiting for writes to complete */
/* there is now more room in the buffer for new writes */
- if (tty) {
- /* let the tty driver wakeup if it has a special write_wakeup function */
+ if (tty)
tty_wakeup(tty);
- }
}
-static int edge_write_room (struct usb_serial_port *port)
+static int edge_write_room(struct usb_serial_port *port)
{
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
int room = 0;
dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
- return -ENODEV;
+ return 0;
if (edge_port->close_pending == 1)
- return -ENODEV;
+ return 0;
spin_lock_irqsave(&edge_port->ep_lock, flags);
room = edge_buf_space_avail(edge_port->ep_out_buf);
return room;
}
-static int edge_chars_in_buffer (struct usb_serial_port *port)
+static int edge_chars_in_buffer(struct usb_serial_port *port)
{
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
int chars = 0;
dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
- return -ENODEV;
+ return 0;
if (edge_port->close_pending == 1)
- return -ENODEV;
+ return 0;
spin_lock_irqsave(&edge_port->ep_lock, flags);
chars = edge_buf_data_avail(edge_port->ep_out_buf);
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
- dbg ("%s - returns %d", __func__, chars);
+ dbg("%s - returns %d", __func__, chars);
return chars;
}
-static void edge_throttle (struct usb_serial_port *port)
+static void edge_throttle(struct usb_serial_port *port)
{
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
- struct tty_struct *tty;
+ struct tty_struct *tty = port->tty;
int status;
dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
return;
- tty = port->tty;
- if (!tty) {
- dbg ("%s - no tty available", __func__);
- return;
- }
-
/* if we are implementing XON/XOFF, send the stop character */
if (I_IXOFF(tty)) {
unsigned char stop_char = STOP_CHAR(tty);
- status = edge_write (port, &stop_char, 1);
- if (status <= 0) {
- dev_err(&port->dev, "%s - failed to write stop character, %d\n", __func__, status);
- }
+ status = edge_write(port, &stop_char, 1);
+ if (status <= 0)
+ dev_err(&port->dev,
+ "%s - failed to write stop character, %d\n",
+ __func__, status);
}
/* if we are implementing RTS/CTS, stop reads */
}
-static void edge_unthrottle (struct usb_serial_port *port)
+static void edge_unthrottle(struct usb_serial_port *port)
{
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
- struct tty_struct *tty;
+ struct tty_struct *tty = port->tty;
int status;
dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
return;
- tty = port->tty;
- if (!tty) {
- dbg ("%s - no tty available", __func__);
- return;
- }
-
/* if we are implementing XON/XOFF, send the start character */
if (I_IXOFF(tty)) {
unsigned char start_char = START_CHAR(tty);
- status = edge_write (port, &start_char, 1);
- if (status <= 0) {
- dev_err(&port->dev, "%s - failed to write start character, %d\n", __func__, status);
- }
+ status = edge_write(port, &start_char, 1);
+ if (status <= 0)
+ dev_err(&port->dev,
+ "%s - failed to write start character, %d\n",
+ __func__, status);
}
-
/* if we are implementing RTS/CTS, restart reads */
/* are the Edgeport will assert the RTS line */
if (C_CRTSCTS(tty)) {
status = restart_read(edge_port);
if (status)
- dev_err(&port->dev, "%s - read bulk usb_submit_urb failed with value %d\n", __func__, status);
+ dev_err(&port->dev,
+ "%s - read bulk usb_submit_urb failed: %d\n",
+ __func__, status);
}
}
return status;
}
-static void change_port_settings (struct edgeport_port *edge_port, struct ktermios *old_termios)
+static void change_port_settings(struct edgeport_port *edge_port,
+ struct ktermios *old_termios)
{
struct ump_uart_config *config;
struct tty_struct *tty;
int baud;
unsigned cflag;
int status;
- int port_number = edge_port->port->number - edge_port->port->serial->minor;
+ int port_number = edge_port->port->number -
+ edge_port->port->serial->minor;
dbg("%s - port %d", __func__, edge_port->port->number);
tty = edge_port->port->tty;
- config = kmalloc (sizeof (*config), GFP_KERNEL);
+ config = kmalloc(sizeof(*config), GFP_KERNEL);
if (!config) {
- dev_err (&edge_port->port->dev, "%s - out of memory\n", __func__);
+ *tty->termios = *old_termios;
+ dev_err(&edge_port->port->dev, "%s - out of memory\n",
+ __func__);
return;
}
config->bUartMode = (__u8)(edge_port->bUartMode);
switch (cflag & CSIZE) {
- case CS5:
- config->bDataBits = UMP_UART_CHAR5BITS;
- dbg ("%s - data bits = 5", __func__);
- break;
- case CS6:
- config->bDataBits = UMP_UART_CHAR6BITS;
- dbg ("%s - data bits = 6", __func__);
- break;
- case CS7:
- config->bDataBits = UMP_UART_CHAR7BITS;
- dbg ("%s - data bits = 7", __func__);
- break;
- default:
- case CS8:
- config->bDataBits = UMP_UART_CHAR8BITS;
- dbg ("%s - data bits = 8", __func__);
+ case CS5:
+ config->bDataBits = UMP_UART_CHAR5BITS;
+ dbg("%s - data bits = 5", __func__);
+ break;
+ case CS6:
+ config->bDataBits = UMP_UART_CHAR6BITS;
+ dbg("%s - data bits = 6", __func__);
+ break;
+ case CS7:
+ config->bDataBits = UMP_UART_CHAR7BITS;
+ dbg("%s - data bits = 7", __func__);
+ break;
+ default:
+ case CS8:
+ config->bDataBits = UMP_UART_CHAR8BITS;
+ dbg("%s - data bits = 8", __func__);
break;
}
dbg("%s - parity = even", __func__);
}
} else {
- config->bParity = UMP_UART_NOPARITY;
+ config->bParity = UMP_UART_NOPARITY;
dbg("%s - parity = none", __func__);
}
restart_read(edge_port);
}
- /* if we are implementing XON/XOFF, set the start and stop character in the device */
- if (I_IXOFF(tty) || I_IXON(tty)) {
- config->cXon = START_CHAR(tty);
- config->cXoff = STOP_CHAR(tty);
+ /* if we are implementing XON/XOFF, set the start and stop
+ character in the device */
+ config->cXon = START_CHAR(tty);
+ config->cXoff = STOP_CHAR(tty);
- /* if we are implementing INBOUND XON/XOFF */
- if (I_IXOFF(tty)) {
- config->wFlags |= UMP_MASK_UART_FLAGS_IN_X;
- dbg ("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x",
- __func__, config->cXon, config->cXoff);
- } else {
- dbg ("%s - INBOUND XON/XOFF is disabled", __func__);
- }
+ /* if we are implementing INBOUND XON/XOFF */
+ if (I_IXOFF(tty)) {
+ config->wFlags |= UMP_MASK_UART_FLAGS_IN_X;
+ dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x",
+ __func__, config->cXon, config->cXoff);
+ } else
+ dbg("%s - INBOUND XON/XOFF is disabled", __func__);
- /* if we are implementing OUTBOUND XON/XOFF */
- if (I_IXON(tty)) {
- config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X;
- dbg ("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x",
- __func__, config->cXon, config->cXoff);
- } else {
- dbg ("%s - OUTBOUND XON/XOFF is disabled", __func__);
- }
- }
+ /* if we are implementing OUTBOUND XON/XOFF */
+ if (I_IXON(tty)) {
+ config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X;
+ dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x",
+ __func__, config->cXon, config->cXoff);
+ } else
+ dbg("%s - OUTBOUND XON/XOFF is disabled", __func__);
tty->termios->c_cflag &= ~CMSPAR;
/* FIXME: Recompute actual baud from divisor here */
- dbg ("%s - baud rate = %d, wBaudRate = %d", __func__, baud, config->wBaudRate);
+ dbg("%s - baud rate = %d, wBaudRate = %d", __func__, baud,
+ config->wBaudRate);
- dbg ("wBaudRate: %d", (int)(461550L / config->wBaudRate));
- dbg ("wFlags: 0x%x", config->wFlags);
- dbg ("bDataBits: %d", config->bDataBits);
- dbg ("bParity: %d", config->bParity);
- dbg ("bStopBits: %d", config->bStopBits);
- dbg ("cXon: %d", config->cXon);
- dbg ("cXoff: %d", config->cXoff);
- dbg ("bUartMode: %d", config->bUartMode);
+ dbg("wBaudRate: %d", (int)(461550L / config->wBaudRate));
+ dbg("wFlags: 0x%x", config->wFlags);
+ dbg("bDataBits: %d", config->bDataBits);
+ dbg("bParity: %d", config->bParity);
+ dbg("bStopBits: %d", config->bStopBits);
+ dbg("cXon: %d", config->cXon);
+ dbg("cXoff: %d", config->cXoff);
+ dbg("bUartMode: %d", config->bUartMode);
/* move the word values into big endian mode */
- cpu_to_be16s (&config->wFlags);
- cpu_to_be16s (&config->wBaudRate);
+ cpu_to_be16s(&config->wFlags);
+ cpu_to_be16s(&config->wBaudRate);
- status = TIWriteCommandSync (edge_port->port->serial->dev,
- UMPC_SET_CONFIG,
+ status = send_cmd(edge_port->port->serial->dev, UMPC_SET_CONFIG,
(__u8)(UMPM_UART1_PORT + port_number),
- 0,
- (__u8 *)config,
- sizeof(*config));
- if (status) {
- dbg ("%s - error %d when trying to write config to device",
+ 0, (__u8 *)config, sizeof(*config));
+ if (status)
+ dbg("%s - error %d when trying to write config to device",
__func__, status);
- }
-
- kfree (config);
-
+ kfree(config);
return;
}
-static void edge_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
+static void edge_set_termios(struct usb_serial_port *port,
+ struct ktermios *old_termios)
{
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
struct tty_struct *tty = port->tty;
- unsigned int cflag;
-
- cflag = tty->termios->c_cflag;
dbg("%s - clfag %08x iflag %08x", __func__,
tty->termios->c_cflag, tty->termios->c_iflag);
dbg("%s - old clfag %08x old iflag %08x", __func__,
old_termios->c_cflag, old_termios->c_iflag);
-
dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
return;
-
/* change the port settings to the new ones specified */
- change_port_settings (edge_port, old_termios);
-
- return;
+ change_port_settings(edge_port, old_termios);
}
-static int edge_tiocmset (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear)
+static int edge_tiocmset(struct usb_serial_port *port, struct file *file,
+ unsigned int set, unsigned int clear)
{
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
unsigned int mcr;
edge_port->shadow_mcr = mcr;
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
- TIRestoreMCR (edge_port, mcr);
-
+ restore_mcr(edge_port, mcr);
return 0;
}
return result;
}
-static int get_serial_info (struct edgeport_port *edge_port, struct serial_struct __user *retinfo)
+static int get_serial_info(struct edgeport_port *edge_port,
+ struct serial_struct __user *retinfo)
{
struct serial_struct tmp;
tmp.baud_base = 9600;
tmp.close_delay = 5*HZ;
tmp.closing_wait = closing_wait;
-// tmp.custom_divisor = state->custom_divisor;
-// tmp.hub6 = state->hub6;
-// tmp.io_type = state->io_type;
-
if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
return -EFAULT;
return 0;
}
-static int edge_ioctl (struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg)
+static int edge_ioctl(struct usb_serial_port *port, struct file *file,
+ unsigned int cmd, unsigned long arg)
{
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
struct async_icount cnow;
dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
switch (cmd) {
- case TIOCINQ:
- dbg("%s - (%d) TIOCINQ", __func__, port->number);
-// return get_number_bytes_avail(edge_port, (unsigned int *) arg);
- break;
-
- case TIOCSERGETLSR:
- dbg("%s - (%d) TIOCSERGETLSR", __func__, port->number);
-// return get_lsr_info(edge_port, (unsigned int *) arg);
- break;
-
- case TIOCGSERIAL:
- dbg("%s - (%d) TIOCGSERIAL", __func__, port->number);
- return get_serial_info(edge_port, (struct serial_struct __user *) arg);
- break;
-
- case TIOCSSERIAL:
- dbg("%s - (%d) TIOCSSERIAL", __func__, port->number);
- break;
-
- case TIOCMIWAIT:
- dbg("%s - (%d) TIOCMIWAIT", __func__, port->number);
- cprev = edge_port->icount;
- while (1) {
- interruptible_sleep_on(&edge_port->delta_msr_wait);
- /* see if a signal did it */
- if (signal_pending(current))
- return -ERESTARTSYS;
- cnow = edge_port->icount;
- if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
- cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
- return -EIO; /* no change => error */
- if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
- ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
- ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
- ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
- return 0;
- }
- cprev = cnow;
+ case TIOCGSERIAL:
+ dbg("%s - (%d) TIOCGSERIAL", __func__, port->number);
+ return get_serial_info(edge_port,
+ (struct serial_struct __user *) arg);
+ case TIOCMIWAIT:
+ dbg("%s - (%d) TIOCMIWAIT", __func__, port->number);
+ cprev = edge_port->icount;
+ while (1) {
+ interruptible_sleep_on(&edge_port->delta_msr_wait);
+ /* see if a signal did it */
+ if (signal_pending(current))
+ return -ERESTARTSYS;
+ cnow = edge_port->icount;
+ if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
+ cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
+ return -EIO; /* no change => error */
+ if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
+ ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
+ ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
+ ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
+ return 0;
}
- /* not reached */
- break;
-
- case TIOCGICOUNT:
- dbg ("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
- port->number, edge_port->icount.rx, edge_port->icount.tx);
- if (copy_to_user((void __user *)arg, &edge_port->icount, sizeof(edge_port->icount)))
- return -EFAULT;
- return 0;
+ cprev = cnow;
+ }
+ /* not reached */
+ break;
+ case TIOCGICOUNT:
+ dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
+ port->number, edge_port->icount.rx, edge_port->icount.tx);
+ if (copy_to_user((void __user *)arg, &edge_port->icount,
+ sizeof(edge_port->icount)))
+ return -EFAULT;
+ return 0;
}
-
return -ENOIOCTLCMD;
}
-static void edge_break (struct usb_serial_port *port, int break_state)
+static void edge_break(struct usb_serial_port *port, int on)
{
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
int status;
+ int bv = 0; /* Off */
- dbg ("%s - state = %d", __func__, break_state);
+ dbg("%s - state = %d", __func__, on);
/* chase the port close */
- TIChasePort (edge_port, 0, 0);
+ chase_port(edge_port, 0, 0);
- if (break_state == -1) {
- status = TISetBreak (edge_port);
- } else {
- status = TIClearBreak (edge_port);
- }
- if (status) {
- dbg ("%s - error %d sending break set/clear command.",
+ if (on == -1)
+ bv = 1; /* On */
+ status = ti_do_config(edge_port, UMPC_SET_CLR_BREAK, bv);
+ if (status)
+ dbg("%s - error %d sending break set/clear command.",
__func__, status);
- }
}
-static int edge_startup (struct usb_serial *serial)
+static int edge_startup(struct usb_serial *serial)
{
struct edgeport_serial *edge_serial;
struct edgeport_port *edge_port;
edge_serial->serial = serial;
usb_set_serial_data(serial, edge_serial);
- status = TIDownloadFirmware (edge_serial);
+ status = download_fw(edge_serial);
if (status) {
- kfree (edge_serial);
+ kfree(edge_serial);
return status;
}
for (i = 0; i < serial->num_ports; ++i) {
edge_port = kzalloc(sizeof(struct edgeport_port), GFP_KERNEL);
if (edge_port == NULL) {
- dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
+ dev_err(&serial->dev->dev, "%s - Out of memory\n",
+ __func__);
goto cleanup;
}
spin_lock_init(&edge_port->ep_lock);
edge_port->ep_out_buf = edge_buf_alloc(EDGE_OUT_BUF_SIZE);
if (edge_port->ep_out_buf == NULL) {
- dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
+ dev_err(&serial->dev->dev, "%s - Out of memory\n",
+ __func__);
kfree(edge_port);
goto cleanup;
}
usb_set_serial_port_data(serial->port[i], edge_port);
edge_port->bUartMode = default_uart_mode;
}
-
+
return 0;
cleanup:
- for (--i; i>=0; --i) {
+ for (--i; i >= 0; --i) {
edge_port = usb_get_serial_port_data(serial->port[i]);
edge_buf_free(edge_port->ep_out_buf);
kfree(edge_port);
usb_set_serial_port_data(serial->port[i], NULL);
}
- kfree (edge_serial);
+ kfree(edge_serial);
usb_set_serial_data(serial, NULL);
return -ENOMEM;
}
-static void edge_shutdown (struct usb_serial *serial)
+static void edge_shutdown(struct usb_serial *serial)
{
int i;
struct edgeport_port *edge_port;
- dbg ("%s", __func__);
+ dbg("%s", __func__);
for (i = 0; i < serial->num_ports; ++i) {
edge_port = usb_get_serial_port_data(serial->port[i]);
return count;
}
-static DEVICE_ATTR(uart_mode, S_IWUSR | S_IRUGO, show_uart_mode, store_uart_mode);
+static DEVICE_ATTR(uart_mode, S_IWUSR | S_IRUGO, show_uart_mode,
+ store_uart_mode);
static int edge_create_sysfs_attrs(struct usb_serial_port *port)
{
static void edge_buf_clear(struct edge_buf *eb)
{
- if (eb != NULL)
- eb->buf_get = eb->buf_put;
- /* equivalent to a get of all data available */
+ if (eb != NULL)
+ eb->buf_get = eb->buf_put;
+ /* equivalent to a get of all data available */
}
static unsigned int edge_buf_data_avail(struct edge_buf *eb)
{
- if (eb != NULL)
- return ((eb->buf_size + eb->buf_put - eb->buf_get) % eb->buf_size);
- else
+ if (eb == NULL)
return 0;
+ return ((eb->buf_size + eb->buf_put - eb->buf_get) % eb->buf_size);
}
static unsigned int edge_buf_space_avail(struct edge_buf *eb)
{
- if (eb != NULL)
- return ((eb->buf_size + eb->buf_get - eb->buf_put - 1) % eb->buf_size);
- else
+ if (eb == NULL)
return 0;
+ return ((eb->buf_size + eb->buf_get - eb->buf_put - 1) % eb->buf_size);
}
if (retval)
goto failed_2port_device_register;
retval = usb_register(&io_driver);
- if (retval)
+ if (retval)
goto failed_usb_register;
info(DRIVER_DESC " " DRIVER_VERSION);
return 0;
return retval;
}
-static void __exit edgeport_exit (void)
+static void __exit edgeport_exit(void)
{
- usb_deregister (&io_driver);
- usb_serial_deregister (&edgeport_1port_device);
- usb_serial_deregister (&edgeport_2port_device);
+ usb_deregister(&io_driver);
+ usb_serial_deregister(&edgeport_1port_device);
+ usb_serial_deregister(&edgeport_2port_device);
}
module_init(edgeport_init);
MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain, in .01 secs");
module_param(ignore_cpu_rev, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(ignore_cpu_rev, "Ignore the cpu revision when connecting to a device");
+MODULE_PARM_DESC(ignore_cpu_rev,
+ "Ignore the cpu revision when connecting to a device");
module_param(default_uart_mode, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(default_uart_mode, "Default uart_mode, 0=RS232, ...");
-
projects / linux-2.6-omap-h63xx.git / commitdiff