Blackfin arch: drop CONFIG_I2C_BOARDINFO ifdefs

Drop CONFIG_I2C_BOARDINFO ifdefs as the common i2c header handles this
already by stubbing things out

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index ee003f47a8241e7db7f93bc0f2bc07b1559fefa0..b23108bcbf59a4db8192ea03dcf3afff7e44a978 100644 (file)
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -473,7 +473,6 @@ static struct platform_device i2c_bfin_twi_device = {
 };
 #endif
 
-#ifdef CONFIG_I2C_BOARDINFO
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
        {
@@ -487,7 +486,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
        },
 #endif
 };
-#endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 static struct platform_device bfin_sport0_uart_device = {
@@ -632,12 +630,8 @@ static struct platform_device *stamp_devices[] __initdata = {
 static int __init ezbrd_init(void)
 {
        printk(KERN_INFO "%s(): registering device resources\n", __func__);
-
-#ifdef CONFIG_I2C_BOARDINFO
        i2c_register_board_info(0, bfin_i2c_board_info,
                                ARRAY_SIZE(bfin_i2c_board_info));
-#endif
-
        platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
        spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
        return 0;

diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 0281159b1c9b96c54f5fe0279af28b1221bb131c..638cfcddbae82ab5ecc4b9ea5e3d44d0d4c59043 100644 (file)
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -793,7 +793,6 @@ static struct platform_device i2c_bfin_twi_device = {
 };
 #endif
 
-#ifdef CONFIG_I2C_BOARDINFO
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
        {
@@ -809,7 +808,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
        },
 #endif
 };
-#endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 static struct platform_device bfin_sport0_uart_device = {
@@ -971,12 +969,8 @@ static struct platform_device *stamp_devices[] __initdata = {
 static int __init stamp_init(void)
 {
        printk(KERN_INFO "%s(): registering device resources\n", __func__);
-
-#ifdef CONFIG_I2C_BOARDINFO
        i2c_register_board_info(0, bfin_i2c_board_info,
                                ARRAY_SIZE(bfin_i2c_board_info));
-#endif
-
        platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
        spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
        return 0;

diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 521b25363815513ccf6aa4b532da95df9f72f5e7..f2b7a54820178157076ea02ce379f8c1d3de55a2 100644 (file)
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -590,7 +590,6 @@ static struct platform_device i2c_bfin_twi_device = {
 };
 #endif
 
-#ifdef CONFIG_I2C_BOARDINFO
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
        {
@@ -604,7 +603,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
        },
 #endif
 };
-#endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 static struct platform_device bfin_sport0_uart_device = {
@@ -767,12 +765,8 @@ static struct platform_device *stamp_devices[] __initdata = {
 static int __init stamp_init(void)
 {
        printk(KERN_INFO "%s(): registering device resources\n", __func__);
-
-#ifdef CONFIG_I2C_BOARDINFO
        i2c_register_board_info(0, bfin_i2c_board_info,
                                ARRAY_SIZE(bfin_i2c_board_info));
-#endif
-
        platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
        spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
        return 0;

diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 60fd9743ebc12be9554c6751653ba4558d90685d..dc9bdb9cd752e64c94e00a432e11429b653b7f89 100644 (file)
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -830,7 +830,6 @@ static struct platform_device i2c_bfin_twi_device = {
 };
 #endif
 
-#ifdef CONFIG_I2C_BOARDINFO
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
        {
@@ -844,7 +843,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
        },
 #endif
 };
-#endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 static struct platform_device bfin_sport0_uart_device = {
@@ -1051,12 +1049,8 @@ static struct platform_device *stamp_devices[] __initdata = {
 static int __init stamp_init(void)
 {
        printk(KERN_INFO "%s(): registering device resources\n", __func__);
-
-#ifdef CONFIG_I2C_BOARDINFO
        i2c_register_board_info(0, bfin_i2c_board_info,
                                ARRAY_SIZE(bfin_i2c_board_info));
-#endif
-
        platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
        spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
        return 0;

diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index 6ee607c259acfb933fa3ecb3f46a410badb7d211..015c18f85e7faf2d272c2fc5dffb6cdc89547a44 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -309,10 +309,8 @@ static struct platform_device i2c_gpio_device = {
 };
 #endif
 
-#ifdef CONFIG_I2C_BOARDINFO
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 };
-#endif
 
 static const unsigned int cclk_vlev_datasheet[] =
 {
@@ -390,10 +388,8 @@ static int __init blackstamp_init(void)
 
        printk(KERN_INFO "%s(): registering device resources\n", __func__);
 
-#ifdef CONFIG_I2C_BOARDINFO
        i2c_register_board_info(0, bfin_i2c_board_info,
                                ARRAY_SIZE(bfin_i2c_board_info));
-#endif
 
        ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
        if (ret < 0)

diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 07f9ad1e189c4c66d44d27c0810d7066476577ac..db96f33f72e238ee5d4c64178232859a692645cf 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -441,7 +441,6 @@ static struct platform_device i2c_gpio_device = {
 };
 #endif
 
-#ifdef CONFIG_I2C_BOARDINFO
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
        {
@@ -461,7 +460,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
        },
 #endif
 };
-#endif
 
 static const unsigned int cclk_vlev_datasheet[] =
 {
@@ -550,10 +548,8 @@ static int __init stamp_init(void)
 
        printk(KERN_INFO "%s(): registering device resources\n", __func__);
 
-#ifdef CONFIG_I2C_BOARDINFO
        i2c_register_board_info(0, bfin_i2c_board_info,
                                ARRAY_SIZE(bfin_i2c_board_info));
-#endif
 
        ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
        if (ret < 0)

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 447d6d40361b3efb4ee5f8117b827fe701fce6f8..2300ed4ec60135833f0a9704828a2865c14c73de 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -1068,7 +1068,6 @@ static struct adp5588_kpad_platform_data adp5588_kpad_data = {
 };
 #endif
 
-#ifdef CONFIG_I2C_BOARDINFO
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
        {
@@ -1102,7 +1101,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
        },
 #endif
 };
-#endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 static struct platform_device bfin_sport0_uart_device = {
@@ -1284,12 +1282,8 @@ static struct platform_device *stamp_devices[] __initdata = {
 static int __init stamp_init(void)
 {
        printk(KERN_INFO "%s(): registering device resources\n", __func__);
-
-#ifdef CONFIG_I2C_BOARDINFO
        i2c_register_board_info(0, bfin_i2c_board_info,
                                ARRAY_SIZE(bfin_i2c_board_info));
-#endif
-
        bfin_plat_nand_init();
        platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
        spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));

diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 309c16014caea54d8582f8dfc222e36a08eb78ab..096e661700a7d666ab4534edbdb847a83975100f 100644 (file)
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -781,7 +781,6 @@ static struct platform_device i2c_bfin_twi1_device = {
 #endif
 #endif
 
-#ifdef CONFIG_I2C_BOARDINFO
 static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
 };
 
@@ -800,7 +799,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
 #endif
 };
 #endif
-#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/gpio_keys.h>
@@ -956,13 +954,11 @@ static int __init ezkit_init(void)
 {
        printk(KERN_INFO "%s(): registering device resources\n", __func__);
 
-#ifdef CONFIG_I2C_BOARDINFO
        i2c_register_board_info(0, bfin_i2c_board_info0,
                                ARRAY_SIZE(bfin_i2c_board_info0));
 #if !defined(CONFIG_BF542)     /* The BF542 only has 1 TWI */
        i2c_register_board_info(1, bfin_i2c_board_info1,
                                ARRAY_SIZE(bfin_i2c_board_info1));
-#endif
 #endif
 
        platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));