]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
x86_64: move kernel
authorThomas Gleixner <tglx@linutronix.de>
Thu, 11 Oct 2007 09:17:24 +0000 (11:17 +0200)
committerThomas Gleixner <tglx@linutronix.de>
Thu, 11 Oct 2007 09:17:24 +0000 (11:17 +0200)
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
74 files changed:
arch/x86/boot/compressed/head_64.S
arch/x86/kernel/Makefile
arch/x86/kernel/Makefile_32
arch/x86/kernel/Makefile_64 [moved from arch/x86_64/kernel/Makefile_64 with 81% similarity]
arch/x86/kernel/acpi/wakeup_64.S
arch/x86/kernel/aperture_64.c [moved from arch/x86_64/kernel/aperture_64.c with 100% similarity]
arch/x86/kernel/apic_64.c [moved from arch/x86_64/kernel/apic_64.c with 100% similarity]
arch/x86/kernel/asm-offsets_64.c [moved from arch/x86_64/kernel/asm-offsets_64.c with 100% similarity]
arch/x86/kernel/audit_64.c [moved from arch/x86_64/kernel/audit_64.c with 100% similarity]
arch/x86/kernel/bugs_64.c [moved from arch/x86_64/kernel/bugs_64.c with 100% similarity]
arch/x86/kernel/crash_64.c [moved from arch/x86_64/kernel/crash_64.c with 100% similarity]
arch/x86/kernel/crash_dump_64.c [moved from arch/x86_64/kernel/crash_dump_64.c with 100% similarity]
arch/x86/kernel/e820_64.c [moved from arch/x86_64/kernel/e820_64.c with 100% similarity]
arch/x86/kernel/early-quirks_64.c [moved from arch/x86_64/kernel/early-quirks_64.c with 100% similarity]
arch/x86/kernel/early_printk.c
arch/x86/kernel/entry_64.S [moved from arch/x86_64/kernel/entry_64.S with 100% similarity]
arch/x86/kernel/genapic_64.c [moved from arch/x86_64/kernel/genapic_64.c with 100% similarity]
arch/x86/kernel/genapic_flat_64.c [moved from arch/x86_64/kernel/genapic_flat_64.c with 100% similarity]
arch/x86/kernel/head64.c [moved from arch/x86_64/kernel/head64.c with 100% similarity]
arch/x86/kernel/head_64.S [moved from arch/x86_64/kernel/head_64.S with 100% similarity]
arch/x86/kernel/hpet_64.c [moved from arch/x86_64/kernel/hpet_64.c with 100% similarity]
arch/x86/kernel/i387_64.c [moved from arch/x86_64/kernel/i387_64.c with 100% similarity]
arch/x86/kernel/i8259_64.c [moved from arch/x86_64/kernel/i8259_64.c with 100% similarity]
arch/x86/kernel/init_task_64.c [moved from arch/x86_64/kernel/init_task_64.c with 100% similarity]
arch/x86/kernel/io_apic_64.c [moved from arch/x86_64/kernel/io_apic_64.c with 100% similarity]
arch/x86/kernel/ioport_64.c [moved from arch/x86_64/kernel/ioport_64.c with 100% similarity]
arch/x86/kernel/irq_64.c [moved from arch/x86_64/kernel/irq_64.c with 100% similarity]
arch/x86/kernel/k8.c [moved from arch/x86_64/kernel/k8.c with 100% similarity]
arch/x86/kernel/kprobes_64.c [moved from arch/x86_64/kernel/kprobes_64.c with 100% similarity]
arch/x86/kernel/ldt_64.c [moved from arch/x86_64/kernel/ldt_64.c with 100% similarity]
arch/x86/kernel/machine_kexec_64.c [moved from arch/x86_64/kernel/machine_kexec_64.c with 100% similarity]
arch/x86/kernel/mce_64.c [moved from arch/x86_64/kernel/mce_64.c with 100% similarity]
arch/x86/kernel/mce_amd_64.c [moved from arch/x86_64/kernel/mce_amd_64.c with 100% similarity]
arch/x86/kernel/mce_intel_64.c [moved from arch/x86_64/kernel/mce_intel_64.c with 100% similarity]
arch/x86/kernel/module_64.c [moved from arch/x86_64/kernel/module_64.c with 100% similarity]
arch/x86/kernel/mpparse_64.c [moved from arch/x86_64/kernel/mpparse_64.c with 100% similarity]
arch/x86/kernel/nmi_64.c [moved from arch/x86_64/kernel/nmi_64.c with 100% similarity]
arch/x86/kernel/pci-calgary_64.c [moved from arch/x86_64/kernel/pci-calgary_64.c with 100% similarity]
arch/x86/kernel/pci-dma_64.c [moved from arch/x86_64/kernel/pci-dma_64.c with 100% similarity]
arch/x86/kernel/pci-gart_64.c [moved from arch/x86_64/kernel/pci-gart_64.c with 100% similarity]
arch/x86/kernel/pci-nommu_64.c [moved from arch/x86_64/kernel/pci-nommu_64.c with 100% similarity]
arch/x86/kernel/pci-swiotlb_64.c [moved from arch/x86_64/kernel/pci-swiotlb_64.c with 100% similarity]
arch/x86/kernel/pmtimer_64.c [moved from arch/x86_64/kernel/pmtimer_64.c with 100% similarity]
arch/x86/kernel/process_64.c [moved from arch/x86_64/kernel/process_64.c with 100% similarity]
arch/x86/kernel/ptrace_64.c [moved from arch/x86_64/kernel/ptrace_64.c with 100% similarity]
arch/x86/kernel/reboot_64.c [moved from arch/x86_64/kernel/reboot_64.c with 100% similarity]
arch/x86/kernel/relocate_kernel_64.S [moved from arch/x86_64/kernel/relocate_kernel_64.S with 100% similarity]
arch/x86/kernel/setup64.c [moved from arch/x86_64/kernel/setup64.c with 100% similarity]
arch/x86/kernel/setup_64.c [moved from arch/x86_64/kernel/setup_64.c with 100% similarity]
arch/x86/kernel/signal_64.c [moved from arch/x86_64/kernel/signal_64.c with 100% similarity]
arch/x86/kernel/smp_64.c [moved from arch/x86_64/kernel/smp_64.c with 100% similarity]
arch/x86/kernel/smpboot_64.c [moved from arch/x86_64/kernel/smpboot_64.c with 100% similarity]
arch/x86/kernel/stacktrace.c [moved from arch/x86_64/kernel/stacktrace.c with 100% similarity]
arch/x86/kernel/suspend_64.c [moved from arch/x86_64/kernel/suspend_64.c with 100% similarity]
arch/x86/kernel/suspend_asm_64.S [moved from arch/x86_64/kernel/suspend_asm_64.S with 100% similarity]
arch/x86/kernel/sys_x86_64.c [moved from arch/x86_64/kernel/sys_x86_64.c with 100% similarity]
arch/x86/kernel/syscall_64.c [moved from arch/x86_64/kernel/syscall_64.c with 100% similarity]
arch/x86/kernel/tce_64.c [moved from arch/x86_64/kernel/tce_64.c with 100% similarity]
arch/x86/kernel/time_64.c [moved from arch/x86_64/kernel/time_64.c with 100% similarity]
arch/x86/kernel/trampoline_64.S [moved from arch/x86_64/kernel/trampoline_64.S with 100% similarity]
arch/x86/kernel/traps_64.c [moved from arch/x86_64/kernel/traps_64.c with 100% similarity]
arch/x86/kernel/tsc_64.c [moved from arch/x86_64/kernel/tsc_64.c with 100% similarity]
arch/x86/kernel/tsc_sync.c
arch/x86/kernel/verify_cpu_64.S [moved from arch/x86_64/kernel/verify_cpu_64.S with 100% similarity]
arch/x86/kernel/vmlinux_64.lds.S [moved from arch/x86_64/kernel/vmlinux_64.lds.S with 100% similarity]
arch/x86/kernel/vsmp_64.c [moved from arch/x86_64/kernel/vsmp_64.c with 100% similarity]
arch/x86/kernel/vsyscall_64.c [moved from arch/x86_64/kernel/vsyscall_64.c with 100% similarity]
arch/x86/kernel/x8664_ksyms_64.c [moved from arch/x86_64/kernel/x8664_ksyms_64.c with 100% similarity]
arch/x86_64/Makefile
arch/x86_64/kernel/Makefile [deleted file]
arch/x86_64/kernel/asm-offsets.c [deleted file]
arch/x86_64/kernel/early_printk.c [deleted file]
arch/x86_64/kernel/tsc_sync.c [deleted file]
arch/x86_64/kernel/vmlinux.lds.S [deleted file]

index cff3d1dc5dd453eea0b71ff40e804b235dc42d5b..49467640751fc0eb0a67c96ca7e9fa0b3d973fb0 100644 (file)
@@ -174,7 +174,7 @@ no_longmode:
        hlt
        jmp     1b
 
-#include "../../../x86_64/kernel/verify_cpu_64.S"
+#include "../../kernel/verify_cpu_64.S"
 
        /* Be careful here startup_64 needs to be at a predictable
         * address so I can export it in an ELF header.  Bootloaders
index 577d08f4b8bbfcd898271a4e014a6a26c134e7a2..45855c97923ee17a9a58b2bd188664d257cda2f1 100644 (file)
@@ -1,5 +1,5 @@
 ifeq ($(CONFIG_X86_32),y)
 include ${srctree}/arch/x86/kernel/Makefile_32
 else
-include ${srctree}/arch/x86_64/kernel/Makefile_64
+include ${srctree}/arch/x86/kernel/Makefile_64
 endif
index 5096f486d389592378e1b6c2d2742c0e19c82393..cb25523026a6447d61f2312d110c9d063a07f337 100644 (file)
@@ -83,6 +83,4 @@ $(obj)/vsyscall-syms.o: $(src)/vsyscall_32.lds \
                        $(obj)/vsyscall-sysenter_32.o $(obj)/vsyscall-note_32.o FORCE
        $(call if_changed,syscall)
 
-k8-y                      += ../../x86_64/kernel/k8.o
-stacktrace-y             += ../../x86_64/kernel/stacktrace.o
 
similarity index 81%
rename from arch/x86_64/kernel/Makefile_64
rename to arch/x86/kernel/Makefile_64
index 120d4e51fd4d1fc92ba3fe0c32510288722ac753..6e6b5909e46562bcc76fa6bdb24d253cc0b377ce 100644 (file)
@@ -49,15 +49,6 @@ obj-y                                += pcspeaker.o
 CFLAGS_vsyscall_64.o           := $(PROFILING) -g0
 
 therm_throt-y                   += ../../x86/kernel/cpu/mcheck/therm_throt.o
-bootflag-y                     += ../../x86/kernel/bootflag.o
-cpuid-$(subst m,y,$(CONFIG_X86_CPUID))  += ../../x86/kernel/cpuid.o
-topology-y                     += ../../x86/kernel/topology.o
-microcode-$(subst m,y,$(CONFIG_MICROCODE))  += ../../x86/kernel/microcode.o
 intel_cacheinfo-y              += ../../x86/kernel/cpu/intel_cacheinfo.o
 addon_cpuid_features-y         += ../../x86/kernel/cpu/addon_cpuid_features.o
-quirks-y                       += ../../x86/kernel/quirks.o
-i8237-y                                += ../../x86/kernel/i8237.o
-msr-$(subst m,y,$(CONFIG_X86_MSR))  += ../../x86/kernel/msr.o
-alternative-y                  += ../../x86/kernel/alternative.o
-pcspeaker-y                    += ../../x86/kernel/pcspeaker.o
 perfctr-watchdog-y             += ../../x86/kernel/cpu/perfctr-watchdog.o
index 5e3b3f5496c5ff8c9fc6244ca6370cf79ef6e9f3..8b4357e1efe0b97dc37b24e5d4cc66321ecfc0cb 100644 (file)
@@ -269,7 +269,7 @@ no_longmode:
        movb    $0xbc,%al       ;  outb %al,$0x80
        jmp no_longmode
 
-#include "../../../x86_64/kernel/verify_cpu_64.S"
+#include "../verify_cpu_64.S"
        
 /* This code uses an extended set of video mode numbers. These include:
  * Aliases for standard modes
index 92f812ba275cf7026415ea2da043012475a320e6..fd9aff3f389011d1a1e3c2cf7a4674325624005d 100644 (file)
@@ -1,2 +1,259 @@
+#include <linux/console.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/screen_info.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/fcntl.h>
+#include <xen/hvc-console.h>
 
-#include "../../x86_64/kernel/early_printk.c"
+/* Simple VGA output */
+
+#ifdef __i386__
+#include <asm/setup.h>
+#else
+#include <asm/bootsetup.h>
+#endif
+#define VGABASE                (__ISA_IO_base + 0xb8000)
+
+static int max_ypos = 25, max_xpos = 80;
+static int current_ypos = 25, current_xpos = 0;
+
+static void early_vga_write(struct console *con, const char *str, unsigned n)
+{
+       char c;
+       int  i, k, j;
+
+       while ((c = *str++) != '\0' && n-- > 0) {
+               if (current_ypos >= max_ypos) {
+                       /* scroll 1 line up */
+                       for (k = 1, j = 0; k < max_ypos; k++, j++) {
+                               for (i = 0; i < max_xpos; i++) {
+                                       writew(readw(VGABASE+2*(max_xpos*k+i)),
+                                              VGABASE + 2*(max_xpos*j + i));
+                               }
+                       }
+                       for (i = 0; i < max_xpos; i++)
+                               writew(0x720, VGABASE + 2*(max_xpos*j + i));
+                       current_ypos = max_ypos-1;
+               }
+               if (c == '\n') {
+                       current_xpos = 0;
+                       current_ypos++;
+               } else if (c != '\r')  {
+                       writew(((0x7 << 8) | (unsigned short) c),
+                              VGABASE + 2*(max_xpos*current_ypos +
+                                               current_xpos++));
+                       if (current_xpos >= max_xpos) {
+                               current_xpos = 0;
+                               current_ypos++;
+                       }
+               }
+       }
+}
+
+static struct console early_vga_console = {
+       .name =         "earlyvga",
+       .write =        early_vga_write,
+       .flags =        CON_PRINTBUFFER,
+       .index =        -1,
+};
+
+/* Serial functions loosely based on a similar package from Klaus P. Gerlicher */
+
+static int early_serial_base = 0x3f8;  /* ttyS0 */
+
+#define XMTRDY          0x20
+
+#define DLAB           0x80
+
+#define TXR             0       /*  Transmit register (WRITE) */
+#define RXR             0       /*  Receive register  (READ)  */
+#define IER             1       /*  Interrupt Enable          */
+#define IIR             2       /*  Interrupt ID              */
+#define FCR             2       /*  FIFO control              */
+#define LCR             3       /*  Line control              */
+#define MCR             4       /*  Modem control             */
+#define LSR             5       /*  Line Status               */
+#define MSR             6       /*  Modem Status              */
+#define DLL             0       /*  Divisor Latch Low         */
+#define DLH             1       /*  Divisor latch High        */
+
+static int early_serial_putc(unsigned char ch)
+{
+       unsigned timeout = 0xffff;
+       while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout)
+               cpu_relax();
+       outb(ch, early_serial_base + TXR);
+       return timeout ? 0 : -1;
+}
+
+static void early_serial_write(struct console *con, const char *s, unsigned n)
+{
+       while (*s && n-- > 0) {
+               if (*s == '\n')
+                       early_serial_putc('\r');
+               early_serial_putc(*s);
+               s++;
+       }
+}
+
+#define DEFAULT_BAUD 9600
+
+static __init void early_serial_init(char *s)
+{
+       unsigned char c;
+       unsigned divisor;
+       unsigned baud = DEFAULT_BAUD;
+       char *e;
+
+       if (*s == ',')
+               ++s;
+
+       if (*s) {
+               unsigned port;
+               if (!strncmp(s,"0x",2)) {
+                       early_serial_base = simple_strtoul(s, &e, 16);
+               } else {
+                       static int bases[] = { 0x3f8, 0x2f8 };
+
+                       if (!strncmp(s,"ttyS",4))
+                               s += 4;
+                       port = simple_strtoul(s, &e, 10);
+                       if (port > 1 || s == e)
+                               port = 0;
+                       early_serial_base = bases[port];
+               }
+               s += strcspn(s, ",");
+               if (*s == ',')
+                       s++;
+       }
+
+       outb(0x3, early_serial_base + LCR);     /* 8n1 */
+       outb(0, early_serial_base + IER);       /* no interrupt */
+       outb(0, early_serial_base + FCR);       /* no fifo */
+       outb(0x3, early_serial_base + MCR);     /* DTR + RTS */
+
+       if (*s) {
+               baud = simple_strtoul(s, &e, 0);
+               if (baud == 0 || s == e)
+                       baud = DEFAULT_BAUD;
+       }
+
+       divisor = 115200 / baud;
+       c = inb(early_serial_base + LCR);
+       outb(c | DLAB, early_serial_base + LCR);
+       outb(divisor & 0xff, early_serial_base + DLL);
+       outb((divisor >> 8) & 0xff, early_serial_base + DLH);
+       outb(c & ~DLAB, early_serial_base + LCR);
+}
+
+static struct console early_serial_console = {
+       .name =         "earlyser",
+       .write =        early_serial_write,
+       .flags =        CON_PRINTBUFFER,
+       .index =        -1,
+};
+
+/* Console interface to a host file on AMD's SimNow! */
+
+static int simnow_fd;
+
+enum {
+       MAGIC1 = 0xBACCD00A,
+       MAGIC2 = 0xCA110000,
+       XOPEN = 5,
+       XWRITE = 4,
+};
+
+static noinline long simnow(long cmd, long a, long b, long c)
+{
+       long ret;
+       asm volatile("cpuid" :
+                    "=a" (ret) :
+                    "b" (a), "c" (b), "d" (c), "0" (MAGIC1), "D" (cmd + MAGIC2));
+       return ret;
+}
+
+static void __init simnow_init(char *str)
+{
+       char *fn = "klog";
+       if (*str == '=')
+               fn = ++str;
+       /* error ignored */
+       simnow_fd = simnow(XOPEN, (unsigned long)fn, O_WRONLY|O_APPEND|O_CREAT, 0644);
+}
+
+static void simnow_write(struct console *con, const char *s, unsigned n)
+{
+       simnow(XWRITE, simnow_fd, (unsigned long)s, n);
+}
+
+static struct console simnow_console = {
+       .name =         "simnow",
+       .write =        simnow_write,
+       .flags =        CON_PRINTBUFFER,
+       .index =        -1,
+};
+
+/* Direct interface for emergencies */
+struct console *early_console = &early_vga_console;
+static int early_console_initialized = 0;
+
+void early_printk(const char *fmt, ...)
+{
+       char buf[512];
+       int n;
+       va_list ap;
+
+       va_start(ap,fmt);
+       n = vscnprintf(buf,512,fmt,ap);
+       early_console->write(early_console,buf,n);
+       va_end(ap);
+}
+
+static int __initdata keep_early;
+
+static int __init setup_early_printk(char *buf)
+{
+       if (!buf)
+               return 0;
+
+       if (early_console_initialized)
+               return 0;
+       early_console_initialized = 1;
+
+       if (strstr(buf, "keep"))
+               keep_early = 1;
+
+       if (!strncmp(buf, "serial", 6)) {
+               early_serial_init(buf + 6);
+               early_console = &early_serial_console;
+       } else if (!strncmp(buf, "ttyS", 4)) {
+               early_serial_init(buf);
+               early_console = &early_serial_console;
+       } else if (!strncmp(buf, "vga", 3)
+                  && SCREEN_INFO.orig_video_isVGA == 1) {
+               max_xpos = SCREEN_INFO.orig_video_cols;
+               max_ypos = SCREEN_INFO.orig_video_lines;
+               current_ypos = SCREEN_INFO.orig_y;
+               early_console = &early_vga_console;
+       } else if (!strncmp(buf, "simnow", 6)) {
+               simnow_init(buf + 6);
+               early_console = &simnow_console;
+               keep_early = 1;
+#ifdef CONFIG_HVC_XEN
+       } else if (!strncmp(buf, "xen", 3)) {
+               early_console = &xenboot_console;
+#endif
+       }
+
+       if (keep_early)
+               early_console->flags &= ~CON_BOOT;
+       else
+               early_console->flags |= CON_BOOT;
+       register_console(early_console);
+       return 0;
+}
+early_param("earlyprintk", setup_early_printk);
similarity index 100%
rename from arch/x86_64/kernel/k8.c
rename to arch/x86/kernel/k8.c
index 12424629af87017b87cd8cfe9666388d28c7defa..355f5f506c8133d2a97108ae211f52839199510b 100644 (file)
@@ -1 +1,187 @@
-#include "../../x86_64/kernel/tsc_sync.c"
+/*
+ * arch/x86_64/kernel/tsc_sync.c: check TSC synchronization.
+ *
+ * Copyright (C) 2006, Red Hat, Inc., Ingo Molnar
+ *
+ * We check whether all boot CPUs have their TSC's synchronized,
+ * print a warning if not and turn off the TSC clock-source.
+ *
+ * The warp-check is point-to-point between two CPUs, the CPU
+ * initiating the bootup is the 'source CPU', the freshly booting
+ * CPU is the 'target CPU'.
+ *
+ * Only two CPUs may participate - they can enter in any order.
+ * ( The serial nature of the boot logic and the CPU hotplug lock
+ *   protects against more than 2 CPUs entering this code. )
+ */
+#include <linux/spinlock.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/nmi.h>
+#include <asm/tsc.h>
+
+/*
+ * Entry/exit counters that make sure that both CPUs
+ * run the measurement code at once:
+ */
+static __cpuinitdata atomic_t start_count;
+static __cpuinitdata atomic_t stop_count;
+
+/*
+ * We use a raw spinlock in this exceptional case, because
+ * we want to have the fastest, inlined, non-debug version
+ * of a critical section, to be able to prove TSC time-warps:
+ */
+static __cpuinitdata raw_spinlock_t sync_lock = __RAW_SPIN_LOCK_UNLOCKED;
+static __cpuinitdata cycles_t last_tsc;
+static __cpuinitdata cycles_t max_warp;
+static __cpuinitdata int nr_warps;
+
+/*
+ * TSC-warp measurement loop running on both CPUs:
+ */
+static __cpuinit void check_tsc_warp(void)
+{
+       cycles_t start, now, prev, end;
+       int i;
+
+       start = get_cycles_sync();
+       /*
+        * The measurement runs for 20 msecs:
+        */
+       end = start + tsc_khz * 20ULL;
+       now = start;
+
+       for (i = 0; ; i++) {
+               /*
+                * We take the global lock, measure TSC, save the
+                * previous TSC that was measured (possibly on
+                * another CPU) and update the previous TSC timestamp.
+                */
+               __raw_spin_lock(&sync_lock);
+               prev = last_tsc;
+               now = get_cycles_sync();
+               last_tsc = now;
+               __raw_spin_unlock(&sync_lock);
+
+               /*
+                * Be nice every now and then (and also check whether
+                * measurement is done [we also insert a 100 million
+                * loops safety exit, so we dont lock up in case the
+                * TSC readout is totally broken]):
+                */
+               if (unlikely(!(i & 7))) {
+                       if (now > end || i > 100000000)
+                               break;
+                       cpu_relax();
+                       touch_nmi_watchdog();
+               }
+               /*
+                * Outside the critical section we can now see whether
+                * we saw a time-warp of the TSC going backwards:
+                */
+               if (unlikely(prev > now)) {
+                       __raw_spin_lock(&sync_lock);
+                       max_warp = max(max_warp, prev - now);
+                       nr_warps++;
+                       __raw_spin_unlock(&sync_lock);
+               }
+
+       }
+}
+
+/*
+ * Source CPU calls into this - it waits for the freshly booted
+ * target CPU to arrive and then starts the measurement:
+ */
+void __cpuinit check_tsc_sync_source(int cpu)
+{
+       int cpus = 2;
+
+       /*
+        * No need to check if we already know that the TSC is not
+        * synchronized:
+        */
+       if (unsynchronized_tsc())
+               return;
+
+       printk(KERN_INFO "checking TSC synchronization [CPU#%d -> CPU#%d]:",
+                         smp_processor_id(), cpu);
+
+       /*
+        * Reset it - in case this is a second bootup:
+        */
+       atomic_set(&stop_count, 0);
+
+       /*
+        * Wait for the target to arrive:
+        */
+       while (atomic_read(&start_count) != cpus-1)
+               cpu_relax();
+       /*
+        * Trigger the target to continue into the measurement too:
+        */
+       atomic_inc(&start_count);
+
+       check_tsc_warp();
+
+       while (atomic_read(&stop_count) != cpus-1)
+               cpu_relax();
+
+       /*
+        * Reset it - just in case we boot another CPU later:
+        */
+       atomic_set(&start_count, 0);
+
+       if (nr_warps) {
+               printk("\n");
+               printk(KERN_WARNING "Measured %Ld cycles TSC warp between CPUs,"
+                                   " turning off TSC clock.\n", max_warp);
+               mark_tsc_unstable("check_tsc_sync_source failed");
+               nr_warps = 0;
+               max_warp = 0;
+               last_tsc = 0;
+       } else {
+               printk(" passed.\n");
+       }
+
+       /*
+        * Let the target continue with the bootup:
+        */
+       atomic_inc(&stop_count);
+}
+
+/*
+ * Freshly booted CPUs call into this:
+ */
+void __cpuinit check_tsc_sync_target(void)
+{
+       int cpus = 2;
+
+       if (unsynchronized_tsc())
+               return;
+
+       /*
+        * Register this CPU's participation and wait for the
+        * source CPU to start the measurement:
+        */
+       atomic_inc(&start_count);
+       while (atomic_read(&start_count) != cpus)
+               cpu_relax();
+
+       check_tsc_warp();
+
+       /*
+        * Ok, we are done:
+        */
+       atomic_inc(&stop_count);
+
+       /*
+        * Wait for the source CPU to print stuff:
+        */
+       while (atomic_read(&stop_count) != cpus)
+               cpu_relax();
+}
+#undef NR_LOOPS
+
index 189d80d3a89182a45b8d62e99899fc1d912ea8b4..afaf0f99887831f1c33e5ef47bd0e5bde008dc83 100644 (file)
 #
 # $Id: Makefile,v 1.31 2002/03/22 15:56:07 ak Exp $
 
+# Fill in SRCARCH
+SRCARCH        := x86
+
+archprepare:
+       @mkdir -p ${objtree}/arch/x86/kernel
+
+
 LDFLAGS                := -m elf_x86_64
 OBJCOPYFLAGS   := -O binary -R .note -R .comment -S
 LDFLAGS_vmlinux :=
@@ -71,10 +78,10 @@ CFLAGS += $(cflags-y)
 CFLAGS_KERNEL += $(cflags-kernel-y)
 AFLAGS += -m64
 
-head-y := arch/x86_64/kernel/head_64.o arch/x86_64/kernel/head64.o arch/x86_64/kernel/init_task_64.o
+head-y := arch/x86/kernel/head_64.o arch/x86/kernel/head64.o arch/x86/kernel/init_task_64.o
 
 libs-y                                         += arch/x86/lib/
-core-y                                 += arch/x86_64/kernel/ \
+core-y                                 += arch/x86/kernel/ \
                                           arch/x86/mm/ \
                                           arch/x86/crypto/ \
                                           arch/x86/vdso/
diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile
deleted file mode 100644 (file)
index 577d08f..0000000
+++ /dev/null
@@ -1,5 +0,0 @@
-ifeq ($(CONFIG_X86_32),y)
-include ${srctree}/arch/x86/kernel/Makefile_32
-else
-include ${srctree}/arch/x86_64/kernel/Makefile_64
-endif
diff --git a/arch/x86_64/kernel/asm-offsets.c b/arch/x86_64/kernel/asm-offsets.c
deleted file mode 100644 (file)
index cfa82c8..0000000
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifdef CONFIG_X86_32
-# include "asm-offsets_32.c"
-#else
-# include "asm-offsets_64.c"
-#endif
diff --git a/arch/x86_64/kernel/early_printk.c b/arch/x86_64/kernel/early_printk.c
deleted file mode 100644 (file)
index fd9aff3..0000000
+++ /dev/null
@@ -1,259 +0,0 @@
-#include <linux/console.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/screen_info.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/fcntl.h>
-#include <xen/hvc-console.h>
-
-/* Simple VGA output */
-
-#ifdef __i386__
-#include <asm/setup.h>
-#else
-#include <asm/bootsetup.h>
-#endif
-#define VGABASE                (__ISA_IO_base + 0xb8000)
-
-static int max_ypos = 25, max_xpos = 80;
-static int current_ypos = 25, current_xpos = 0;
-
-static void early_vga_write(struct console *con, const char *str, unsigned n)
-{
-       char c;
-       int  i, k, j;
-
-       while ((c = *str++) != '\0' && n-- > 0) {
-               if (current_ypos >= max_ypos) {
-                       /* scroll 1 line up */
-                       for (k = 1, j = 0; k < max_ypos; k++, j++) {
-                               for (i = 0; i < max_xpos; i++) {
-                                       writew(readw(VGABASE+2*(max_xpos*k+i)),
-                                              VGABASE + 2*(max_xpos*j + i));
-                               }
-                       }
-                       for (i = 0; i < max_xpos; i++)
-                               writew(0x720, VGABASE + 2*(max_xpos*j + i));
-                       current_ypos = max_ypos-1;
-               }
-               if (c == '\n') {
-                       current_xpos = 0;
-                       current_ypos++;
-               } else if (c != '\r')  {
-                       writew(((0x7 << 8) | (unsigned short) c),
-                              VGABASE + 2*(max_xpos*current_ypos +
-                                               current_xpos++));
-                       if (current_xpos >= max_xpos) {
-                               current_xpos = 0;
-                               current_ypos++;
-                       }
-               }
-       }
-}
-
-static struct console early_vga_console = {
-       .name =         "earlyvga",
-       .write =        early_vga_write,
-       .flags =        CON_PRINTBUFFER,
-       .index =        -1,
-};
-
-/* Serial functions loosely based on a similar package from Klaus P. Gerlicher */
-
-static int early_serial_base = 0x3f8;  /* ttyS0 */
-
-#define XMTRDY          0x20
-
-#define DLAB           0x80
-
-#define TXR             0       /*  Transmit register (WRITE) */
-#define RXR             0       /*  Receive register  (READ)  */
-#define IER             1       /*  Interrupt Enable          */
-#define IIR             2       /*  Interrupt ID              */
-#define FCR             2       /*  FIFO control              */
-#define LCR             3       /*  Line control              */
-#define MCR             4       /*  Modem control             */
-#define LSR             5       /*  Line Status               */
-#define MSR             6       /*  Modem Status              */
-#define DLL             0       /*  Divisor Latch Low         */
-#define DLH             1       /*  Divisor latch High        */
-
-static int early_serial_putc(unsigned char ch)
-{
-       unsigned timeout = 0xffff;
-       while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout)
-               cpu_relax();
-       outb(ch, early_serial_base + TXR);
-       return timeout ? 0 : -1;
-}
-
-static void early_serial_write(struct console *con, const char *s, unsigned n)
-{
-       while (*s && n-- > 0) {
-               if (*s == '\n')
-                       early_serial_putc('\r');
-               early_serial_putc(*s);
-               s++;
-       }
-}
-
-#define DEFAULT_BAUD 9600
-
-static __init void early_serial_init(char *s)
-{
-       unsigned char c;
-       unsigned divisor;
-       unsigned baud = DEFAULT_BAUD;
-       char *e;
-
-       if (*s == ',')
-               ++s;
-
-       if (*s) {
-               unsigned port;
-               if (!strncmp(s,"0x",2)) {
-                       early_serial_base = simple_strtoul(s, &e, 16);
-               } else {
-                       static int bases[] = { 0x3f8, 0x2f8 };
-
-                       if (!strncmp(s,"ttyS",4))
-                               s += 4;
-                       port = simple_strtoul(s, &e, 10);
-                       if (port > 1 || s == e)
-                               port = 0;
-                       early_serial_base = bases[port];
-               }
-               s += strcspn(s, ",");
-               if (*s == ',')
-                       s++;
-       }
-
-       outb(0x3, early_serial_base + LCR);     /* 8n1 */
-       outb(0, early_serial_base + IER);       /* no interrupt */
-       outb(0, early_serial_base + FCR);       /* no fifo */
-       outb(0x3, early_serial_base + MCR);     /* DTR + RTS */
-
-       if (*s) {
-               baud = simple_strtoul(s, &e, 0);
-               if (baud == 0 || s == e)
-                       baud = DEFAULT_BAUD;
-       }
-
-       divisor = 115200 / baud;
-       c = inb(early_serial_base + LCR);
-       outb(c | DLAB, early_serial_base + LCR);
-       outb(divisor & 0xff, early_serial_base + DLL);
-       outb((divisor >> 8) & 0xff, early_serial_base + DLH);
-       outb(c & ~DLAB, early_serial_base + LCR);
-}
-
-static struct console early_serial_console = {
-       .name =         "earlyser",
-       .write =        early_serial_write,
-       .flags =        CON_PRINTBUFFER,
-       .index =        -1,
-};
-
-/* Console interface to a host file on AMD's SimNow! */
-
-static int simnow_fd;
-
-enum {
-       MAGIC1 = 0xBACCD00A,
-       MAGIC2 = 0xCA110000,
-       XOPEN = 5,
-       XWRITE = 4,
-};
-
-static noinline long simnow(long cmd, long a, long b, long c)
-{
-       long ret;
-       asm volatile("cpuid" :
-                    "=a" (ret) :
-                    "b" (a), "c" (b), "d" (c), "0" (MAGIC1), "D" (cmd + MAGIC2));
-       return ret;
-}
-
-static void __init simnow_init(char *str)
-{
-       char *fn = "klog";
-       if (*str == '=')
-               fn = ++str;
-       /* error ignored */
-       simnow_fd = simnow(XOPEN, (unsigned long)fn, O_WRONLY|O_APPEND|O_CREAT, 0644);
-}
-
-static void simnow_write(struct console *con, const char *s, unsigned n)
-{
-       simnow(XWRITE, simnow_fd, (unsigned long)s, n);
-}
-
-static struct console simnow_console = {
-       .name =         "simnow",
-       .write =        simnow_write,
-       .flags =        CON_PRINTBUFFER,
-       .index =        -1,
-};
-
-/* Direct interface for emergencies */
-struct console *early_console = &early_vga_console;
-static int early_console_initialized = 0;
-
-void early_printk(const char *fmt, ...)
-{
-       char buf[512];
-       int n;
-       va_list ap;
-
-       va_start(ap,fmt);
-       n = vscnprintf(buf,512,fmt,ap);
-       early_console->write(early_console,buf,n);
-       va_end(ap);
-}
-
-static int __initdata keep_early;
-
-static int __init setup_early_printk(char *buf)
-{
-       if (!buf)
-               return 0;
-
-       if (early_console_initialized)
-               return 0;
-       early_console_initialized = 1;
-
-       if (strstr(buf, "keep"))
-               keep_early = 1;
-
-       if (!strncmp(buf, "serial", 6)) {
-               early_serial_init(buf + 6);
-               early_console = &early_serial_console;
-       } else if (!strncmp(buf, "ttyS", 4)) {
-               early_serial_init(buf);
-               early_console = &early_serial_console;
-       } else if (!strncmp(buf, "vga", 3)
-                  && SCREEN_INFO.orig_video_isVGA == 1) {
-               max_xpos = SCREEN_INFO.orig_video_cols;
-               max_ypos = SCREEN_INFO.orig_video_lines;
-               current_ypos = SCREEN_INFO.orig_y;
-               early_console = &early_vga_console;
-       } else if (!strncmp(buf, "simnow", 6)) {
-               simnow_init(buf + 6);
-               early_console = &simnow_console;
-               keep_early = 1;
-#ifdef CONFIG_HVC_XEN
-       } else if (!strncmp(buf, "xen", 3)) {
-               early_console = &xenboot_console;
-#endif
-       }
-
-       if (keep_early)
-               early_console->flags &= ~CON_BOOT;
-       else
-               early_console->flags |= CON_BOOT;
-       register_console(early_console);
-       return 0;
-}
-early_param("earlyprintk", setup_early_printk);
diff --git a/arch/x86_64/kernel/tsc_sync.c b/arch/x86_64/kernel/tsc_sync.c
deleted file mode 100644 (file)
index 355f5f5..0000000
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * arch/x86_64/kernel/tsc_sync.c: check TSC synchronization.
- *
- * Copyright (C) 2006, Red Hat, Inc., Ingo Molnar
- *
- * We check whether all boot CPUs have their TSC's synchronized,
- * print a warning if not and turn off the TSC clock-source.
- *
- * The warp-check is point-to-point between two CPUs, the CPU
- * initiating the bootup is the 'source CPU', the freshly booting
- * CPU is the 'target CPU'.
- *
- * Only two CPUs may participate - they can enter in any order.
- * ( The serial nature of the boot logic and the CPU hotplug lock
- *   protects against more than 2 CPUs entering this code. )
- */
-#include <linux/spinlock.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/nmi.h>
-#include <asm/tsc.h>
-
-/*
- * Entry/exit counters that make sure that both CPUs
- * run the measurement code at once:
- */
-static __cpuinitdata atomic_t start_count;
-static __cpuinitdata atomic_t stop_count;
-
-/*
- * We use a raw spinlock in this exceptional case, because
- * we want to have the fastest, inlined, non-debug version
- * of a critical section, to be able to prove TSC time-warps:
- */
-static __cpuinitdata raw_spinlock_t sync_lock = __RAW_SPIN_LOCK_UNLOCKED;
-static __cpuinitdata cycles_t last_tsc;
-static __cpuinitdata cycles_t max_warp;
-static __cpuinitdata int nr_warps;
-
-/*
- * TSC-warp measurement loop running on both CPUs:
- */
-static __cpuinit void check_tsc_warp(void)
-{
-       cycles_t start, now, prev, end;
-       int i;
-
-       start = get_cycles_sync();
-       /*
-        * The measurement runs for 20 msecs:
-        */
-       end = start + tsc_khz * 20ULL;
-       now = start;
-
-       for (i = 0; ; i++) {
-               /*
-                * We take the global lock, measure TSC, save the
-                * previous TSC that was measured (possibly on
-                * another CPU) and update the previous TSC timestamp.
-                */
-               __raw_spin_lock(&sync_lock);
-               prev = last_tsc;
-               now = get_cycles_sync();
-               last_tsc = now;
-               __raw_spin_unlock(&sync_lock);
-
-               /*
-                * Be nice every now and then (and also check whether
-                * measurement is done [we also insert a 100 million
-                * loops safety exit, so we dont lock up in case the
-                * TSC readout is totally broken]):
-                */
-               if (unlikely(!(i & 7))) {
-                       if (now > end || i > 100000000)
-                               break;
-                       cpu_relax();
-                       touch_nmi_watchdog();
-               }
-               /*
-                * Outside the critical section we can now see whether
-                * we saw a time-warp of the TSC going backwards:
-                */
-               if (unlikely(prev > now)) {
-                       __raw_spin_lock(&sync_lock);
-                       max_warp = max(max_warp, prev - now);
-                       nr_warps++;
-                       __raw_spin_unlock(&sync_lock);
-               }
-
-       }
-}
-
-/*
- * Source CPU calls into this - it waits for the freshly booted
- * target CPU to arrive and then starts the measurement:
- */
-void __cpuinit check_tsc_sync_source(int cpu)
-{
-       int cpus = 2;
-
-       /*
-        * No need to check if we already know that the TSC is not
-        * synchronized:
-        */
-       if (unsynchronized_tsc())
-               return;
-
-       printk(KERN_INFO "checking TSC synchronization [CPU#%d -> CPU#%d]:",
-                         smp_processor_id(), cpu);
-
-       /*
-        * Reset it - in case this is a second bootup:
-        */
-       atomic_set(&stop_count, 0);
-
-       /*
-        * Wait for the target to arrive:
-        */
-       while (atomic_read(&start_count) != cpus-1)
-               cpu_relax();
-       /*
-        * Trigger the target to continue into the measurement too:
-        */
-       atomic_inc(&start_count);
-
-       check_tsc_warp();
-
-       while (atomic_read(&stop_count) != cpus-1)
-               cpu_relax();
-
-       /*
-        * Reset it - just in case we boot another CPU later:
-        */
-       atomic_set(&start_count, 0);
-
-       if (nr_warps) {
-               printk("\n");
-               printk(KERN_WARNING "Measured %Ld cycles TSC warp between CPUs,"
-                                   " turning off TSC clock.\n", max_warp);
-               mark_tsc_unstable("check_tsc_sync_source failed");
-               nr_warps = 0;
-               max_warp = 0;
-               last_tsc = 0;
-       } else {
-               printk(" passed.\n");
-       }
-
-       /*
-        * Let the target continue with the bootup:
-        */
-       atomic_inc(&stop_count);
-}
-
-/*
- * Freshly booted CPUs call into this:
- */
-void __cpuinit check_tsc_sync_target(void)
-{
-       int cpus = 2;
-
-       if (unsynchronized_tsc())
-               return;
-
-       /*
-        * Register this CPU's participation and wait for the
-        * source CPU to start the measurement:
-        */
-       atomic_inc(&start_count);
-       while (atomic_read(&start_count) != cpus)
-               cpu_relax();
-
-       check_tsc_warp();
-
-       /*
-        * Ok, we are done:
-        */
-       atomic_inc(&stop_count);
-
-       /*
-        * Wait for the source CPU to print stuff:
-        */
-       while (atomic_read(&stop_count) != cpus)
-               cpu_relax();
-}
-#undef NR_LOOPS
-
diff --git a/arch/x86_64/kernel/vmlinux.lds.S b/arch/x86_64/kernel/vmlinux.lds.S
deleted file mode 100644 (file)
index 849ee61..0000000
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifdef CONFIG_X86_32
-# include "vmlinux_32.lds.S"
-#else
-# include "vmlinux_64.lds.S"
-#endif