]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
ide: remove obsoleted "hdx=" kernel parameters
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Tue, 15 Jul 2008 19:21:46 +0000 (21:21 +0200)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Tue, 15 Jul 2008 19:21:46 +0000 (21:21 +0200)
* Remove obsoleted "hdx=" kernel parameters.

* Remove no longer used stridx() and match_parm().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Documentation/kernel-parameters.txt
drivers/ide/ide.c

index b52f47d588b40fea417bf4bca4ffdbfef4d02152..faeea507cdca7b3889fab39ff99a11978cff80dd 100644 (file)
@@ -722,9 +722,6 @@ and is between 256 and 4096 characters. It is defined in the file
        hd=             [EIDE] (E)IDE hard drive subsystem geometry
                        Format: <cyl>,<head>,<sect>
 
-       hd?=            [HW] (E)IDE subsystem
-       hd?lun=         See Documentation/ide/ide.txt.
-
        highmem=nn[KMG] [KNL,BOOT] forces the highmem zone to have an exact
                        size of <nn>. This works even on boxes that have no
                        highmem otherwise. This also works to reduce highmem
index f65be738b16ac0ffba8b936529d40cee1c252bcf..6f600d81a97226c38e2f94c1ecc79ebc2cdada35 100644 (file)
@@ -721,90 +721,14 @@ set_val:
 
 EXPORT_SYMBOL(generic_ide_ioctl);
 
-/*
- * stridx() returns the offset of c within s,
- * or -1 if c is '\0' or not found within s.
- */
-static int __init stridx (const char *s, char c)
-{
-       char *i = strchr(s, c);
-       return (i && c) ? i - s : -1;
-}
-
-/*
- * match_parm() does parsing for ide_setup():
- *
- * 1. the first char of s must be '='.
- * 2. if the remainder matches one of the supplied keywords,
- *     the index (1 based) of the keyword is negated and returned.
- * 3. if the remainder is a series of no more than max_vals numbers
- *     separated by commas, the numbers are saved in vals[] and a
- *     count of how many were saved is returned.  Base10 is assumed,
- *     and base16 is allowed when prefixed with "0x".
- * 4. otherwise, zero is returned.
- */
-static int __init match_parm (char *s, const char *keywords[], int vals[], int max_vals)
-{
-       static const char *decimal = "0123456789";
-       static const char *hex = "0123456789abcdef";
-       int i, n;
-
-       if (*s++ == '=') {
-               /*
-                * Try matching against the supplied keywords,
-                * and return -(index+1) if we match one
-                */
-               if (keywords != NULL) {
-                       for (i = 0; *keywords != NULL; ++i) {
-                               if (!strcmp(s, *keywords++))
-                                       return -(i+1);
-                       }
-               }
-               /*
-                * Look for a series of no more than "max_vals"
-                * numeric values separated by commas, in base10,
-                * or base16 when prefixed with "0x".
-                * Return a count of how many were found.
-                */
-               for (n = 0; (i = stridx(decimal, *s)) >= 0;) {
-                       vals[n] = i;
-                       while ((i = stridx(decimal, *++s)) >= 0)
-                               vals[n] = (vals[n] * 10) + i;
-                       if (*s == 'x' && !vals[n]) {
-                               while ((i = stridx(hex, *++s)) >= 0)
-                                       vals[n] = (vals[n] * 0x10) + i;
-                       }
-                       if (++n == max_vals)
-                               break;
-                       if (*s == ',' || *s == ';')
-                               ++s;
-               }
-               if (!*s)
-                       return n;
-       }
-       return 0;       /* zero = nothing matched */
-}
-
 /*
  * ide_setup() gets called VERY EARLY during initialization,
- * to handle kernel "command line" strings beginning with "hdx=" or "ide".
+ * to handle kernel "command line" strings beginning with "ide".
  *
  * Remember to update Documentation/ide/ide.txt if you change something here.
  */
 static int __init ide_setup(char *s)
 {
-       ide_hwif_t *hwif;
-       ide_drive_t *drive;
-       unsigned int hw, unit;
-       int vals[3];
-       const char max_drive = 'a' + ((MAX_HWIFS * MAX_DRIVES) - 1);
-
-       if (strncmp(s,"hd",2) == 0 && s[2] == '=')      /* hd= is for hd.c   */
-               return 0;                               /* driver and not us */
-
-       if (strncmp(s, "ide", 3) && strncmp(s, "hd", 2))
-               return 0;
-
        printk(KERN_INFO "ide_setup: %s", s);
        init_ide_data ();
 
@@ -842,67 +766,6 @@ static int __init ide_setup(char *s)
        }
 #endif /* CONFIG_BLK_DEV_IDEACPI */
 
-       /*
-        * Look for drive options:  "hdx="
-        */
-       if (s[0] == 'h' && s[1] == 'd' && s[2] >= 'a' && s[2] <= max_drive) {
-               const char *hd_words[] = {
-                       "none", "noprobe", "nowerr", "cdrom", "nodma",
-                       "-6", "-7", "-8", "-9", "-10",
-                       "noflush", "remap", "remap63", "scsi", NULL };
-               unit = s[2] - 'a';
-               hw   = unit / MAX_DRIVES;
-               unit = unit % MAX_DRIVES;
-               hwif = &ide_hwifs[hw];
-               drive = &hwif->drives[unit];
-               if (strncmp(s + 4, "ide-", 4) == 0) {
-                       strlcpy(drive->driver_req, s + 4, sizeof(drive->driver_req));
-                       goto obsolete_option;
-               }
-               switch (match_parm(&s[3], hd_words, vals, 3)) {
-                       case -1: /* "none" */
-                       case -2: /* "noprobe" */
-                               drive->noprobe = 1;
-                               goto obsolete_option;
-                       case -3: /* "nowerr" */
-                               drive->bad_wstat = BAD_R_STAT;
-                               goto obsolete_option;
-                       case -4: /* "cdrom" */
-                               drive->present = 1;
-                               drive->media = ide_cdrom;
-                               /* an ATAPI device ignores DRDY */
-                               drive->ready_stat = 0;
-                               goto obsolete_option;
-                       case -5: /* nodma */
-                               drive->nodma = 1;
-                               goto obsolete_option;
-                       case -11: /* noflush */
-                               drive->noflush = 1;
-                               goto obsolete_option;
-                       case -12: /* "remap" */
-                               drive->remap_0_to_1 = 1;
-                               goto obsolete_option;
-                       case -13: /* "remap63" */
-                               drive->sect0 = 63;
-                               goto obsolete_option;
-                       case -14: /* "scsi" */
-                               drive->scsi = 1;
-                               goto obsolete_option;
-                       case 3: /* cyl,head,sect */
-                               drive->media    = ide_disk;
-                               drive->ready_stat = READY_STAT;
-                               drive->cyl      = drive->bios_cyl  = vals[0];
-                               drive->head     = drive->bios_head = vals[1];
-                               drive->sect     = drive->bios_sect = vals[2];
-                               drive->present  = 1;
-                               drive->forced_geom = 1;
-                               goto obsolete_option;
-                       default:
-                               goto bad_option;
-               }
-       }
-
-bad_option:
        printk(" -- BAD OPTION\n");
        return 1;
 obsolete_option: