]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[ARM] nommu: provide a way for correct control register value selection
authorRussell King <rmk@dyn-67.arm.linux.org.uk>
Thu, 29 Jun 2006 14:09:57 +0000 (15:09 +0100)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Thu, 29 Jun 2006 14:09:57 +0000 (15:09 +0100)
Most MMU-based CPUs have a restriction on the setting of the data cache
enable and mmu enable bits in the control register, whereby if the data
cache is enabled, the MMU must also be enabled.  Enabling the data
cache without the MMU is an invalid combination.

However, there are CPUs where the data cache can be enabled without the
MMU.

In order to allow these CPUs to take advantage of that, provide a
method whereby each proc-*.S file defines the control regsiter value
for use with nommu (with the MMU disabled.)  Later on, when we add
support for enabling the MMU on these devices, we can adjust the
"crval" macro to also enable the data cache for nommu.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
15 files changed:
arch/arm/mm/proc-arm1020.S
arch/arm/mm/proc-arm1020e.S
arch/arm/mm/proc-arm1022.S
arch/arm/mm/proc-arm1026.S
arch/arm/mm/proc-arm720.S
arch/arm/mm/proc-arm920.S
arch/arm/mm/proc-arm922.S
arch/arm/mm/proc-arm925.S
arch/arm/mm/proc-arm926.S
arch/arm/mm/proc-macros.S
arch/arm/mm/proc-sa110.S
arch/arm/mm/proc-sa1100.S
arch/arm/mm/proc-v6.S
arch/arm/mm/proc-xsc3.S
arch/arm/mm/proc-xscale.S

index b9abbafca81225c5c6295438d49147c89b5f7860..a1b85d9ae48eadb9b2fc249219328af1ef2df27f 100644 (file)
@@ -440,11 +440,12 @@ __arm1020_setup:
 #ifdef CONFIG_MMU
        mcr     p15, 0, r0, c8, c7              @ invalidate I,D TLBs on v4
 #endif
+
+       adr     r5, arm1020_crval
+       ldmia   r5, {r5, r6}
        mrc     p15, 0, r0, c1, c0              @ get control register v4
-       ldr     r5, arm1020_cr1_clear
        bic     r0, r0, r5
-       ldr     r5, arm1020_cr1_set
-       orr     r0, r0, r5
+       orr     r0, r0, r6
 #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
        orr     r0, r0, #0x4000                 @ .R.. .... .... ....
 #endif
@@ -456,12 +457,9 @@ __arm1020_setup:
         * .RVI ZFRS BLDP WCAM
         * .011 1001 ..11 0101
         */
-       .type   arm1020_cr1_clear, #object
-       .type   arm1020_cr1_set, #object
-arm1020_cr1_clear:
-       .word   0x593f
-arm1020_cr1_set:
-       .word   0x3935
+       .type   arm1020_crval, #object
+arm1020_crval:
+       crval   clear=0x0000593f, mmuset=0x00003935, ucset=0x00001930
 
        __INITDATA
 
index 8c7e25f4b7e7f059635357d483c34eb7fca5aad0..6130930a800aad2b249e77a881a60235f1129663 100644 (file)
@@ -422,11 +422,11 @@ __arm1020e_setup:
 #ifdef CONFIG_MMU
        mcr     p15, 0, r0, c8, c7              @ invalidate I,D TLBs on v4
 #endif
+       adr     r5, arm1020e_crval
+       ldmia   r5, {r5, r6}
        mrc     p15, 0, r0, c1, c0              @ get control register v4
-       ldr     r5, arm1020e_cr1_clear
        bic     r0, r0, r5
-       ldr     r5, arm1020e_cr1_set
-       orr     r0, r0, r5
+       orr     r0, r0, r6
 #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
        orr     r0, r0, #0x4000                 @ .R.. .... .... ....
 #endif
@@ -438,12 +438,9 @@ __arm1020e_setup:
         * .RVI ZFRS BLDP WCAM
         * .011 1001 ..11 0101
         */
-       .type   arm1020e_cr1_clear, #object
-       .type   arm1020e_cr1_set, #object
-arm1020e_cr1_clear:
-       .word   0x5f3f
-arm1020e_cr1_set:
-       .word   0x3935
+       .type   arm1020e_crval, #object
+arm1020e_crval:
+       crval   clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001930
 
        __INITDATA
 
index 92218e6b39064eb277abee451e36236cfe293e46..e435974062f65f102690dc763425acc59380b82c 100644 (file)
@@ -404,11 +404,11 @@ __arm1022_setup:
 #ifdef CONFIG_MMU
        mcr     p15, 0, r0, c8, c7              @ invalidate I,D TLBs on v4
 #endif
+       adr     r5, arm1022_crval
+       ldmia   r5, {r5, r6}
        mrc     p15, 0, r0, c1, c0              @ get control register v4
-       ldr     r5, arm1022_cr1_clear
        bic     r0, r0, r5
-       ldr     r5, arm1022_cr1_set
-       orr     r0, r0, r5
+       orr     r0, r0, r6
 #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
        orr     r0, r0, #0x4000                 @ .R..............
 #endif
@@ -421,12 +421,9 @@ __arm1022_setup:
         * .011 1001 ..11 0101
         * 
         */
-       .type   arm1022_cr1_clear, #object
-       .type   arm1022_cr1_set, #object
-arm1022_cr1_clear:
-       .word   0x7f3f
-arm1022_cr1_set:
-       .word   0x3935
+       .type   arm1022_crval, #object
+arm1022_crval:
+       crval   clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001930
 
        __INITDATA
 
index 2796c8e0ddf341c5919acc913d6cef1e0222b007..85d8fb0f25b585576bd23364332fe527a75d1b27 100644 (file)
@@ -399,11 +399,11 @@ __arm1026_setup:
        mov     r0, #4                          @ explicitly disable writeback
        mcr     p15, 7, r0, c15, c0, 0
 #endif
+       adr     r5, arm1026_crval
+       ldmia   r5, {r5, r6}
        mrc     p15, 0, r0, c1, c0              @ get control register v4
-       ldr     r5, arm1026_cr1_clear
        bic     r0, r0, r5
-       ldr     r5, arm1026_cr1_set
-       orr     r0, r0, r5
+       orr     r0, r0, r6
 #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
        orr     r0, r0, #0x4000                 @ .R.. .... .... ....
 #endif
@@ -416,12 +416,9 @@ __arm1026_setup:
         * .011 1001 ..11 0101
         * 
         */
-       .type   arm1026_cr1_clear, #object
-       .type   arm1026_cr1_set, #object
-arm1026_cr1_clear:
-       .word   0x7f3f
-arm1026_cr1_set:
-       .word   0x3935
+       .type   arm1026_crval, #object
+arm1026_crval:
+       crval   clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001934
 
        __INITDATA
 
index 86102467d37f98fedf2ff9e75a83f2e3430dd795..b22bc3af232eff17379de3017b2c612a7f7d52a7 100644 (file)
@@ -169,11 +169,11 @@ __arm720_setup:
 #ifdef CONFIG_MMU
        mcr     p15, 0, r0, c8, c7, 0           @ flush TLB (v4)
 #endif
+       adr     r5, arm720_crval
+       ldmia   r5, {r5, r6}
        mrc     p15, 0, r0, c1, c0              @ get control register
-       ldr     r5, arm720_cr1_clear
        bic     r0, r0, r5
-       ldr     r5, arm720_cr1_set
-       orr     r0, r0, r5
+       orr     r0, r0, r6
        mov     pc, lr                          @ __ret (head.S)
        .size   __arm720_setup, . - __arm720_setup
 
@@ -183,12 +183,9 @@ __arm720_setup:
         * ..1. 1001 ..11 1101
         * 
         */
-       .type   arm720_cr1_clear, #object
-       .type   arm720_cr1_set, #object
-arm720_cr1_clear:
-       .word   0x2f3f
-arm720_cr1_set:
-       .word   0x213d
+       .type   arm720_crval, #object
+arm720_crval:
+       crval   clear=0x00002f3f, mmuset=0x0000213d, ucset=0x00000130
 
                __INITDATA
 
index 02af3e2a82473e6ffc6ef1e090392d896558f4cb..e647c3ae1351b1549f9e7707ac224ce1c8473093 100644 (file)
@@ -391,11 +391,11 @@ __arm920_setup:
 #ifdef CONFIG_MMU
        mcr     p15, 0, r0, c8, c7              @ invalidate I,D TLBs on v4
 #endif
+       adr     r5, arm920_crval
+       ldmia   r5, {r5, r6}
        mrc     p15, 0, r0, c1, c0              @ get control register v4
-       ldr     r5, arm920_cr1_clear
        bic     r0, r0, r5
-       ldr     r5, arm920_cr1_set
-       orr     r0, r0, r5
+       orr     r0, r0, r6
        mov     pc, lr
        .size   __arm920_setup, . - __arm920_setup
 
@@ -405,12 +405,9 @@ __arm920_setup:
         * ..11 0001 ..11 0101
         * 
         */
-       .type   arm920_cr1_clear, #object
-       .type   arm920_cr1_set, #object
-arm920_cr1_clear:
-       .word   0x3f3f
-arm920_cr1_set:
-       .word   0x3135
+       .type   arm920_crval, #object
+arm920_crval:
+       crval   clear=0x00003f3f, mmuset=0x00003135, ucset=0x00001130
 
        __INITDATA
 
index 33dae4929f09b050579090ed136f114e1249a07f..0d237693d0a427aebd412fc43a4005a0e25d7295 100644 (file)
@@ -395,11 +395,11 @@ __arm922_setup:
 #ifdef CONFIG_MMU
        mcr     p15, 0, r0, c8, c7              @ invalidate I,D TLBs on v4
 #endif
+       adr     r5, arm922_crval
+       ldmia   r5, {r5, r6}
        mrc     p15, 0, r0, c1, c0              @ get control register v4
-       ldr     r5, arm922_cr1_clear
        bic     r0, r0, r5
-       ldr     r5, arm922_cr1_set
-       orr     r0, r0, r5
+       orr     r0, r0, r6
        mov     pc, lr
        .size   __arm922_setup, . - __arm922_setup
 
@@ -409,12 +409,9 @@ __arm922_setup:
         * ..11 0001 ..11 0101
         * 
         */
-       .type   arm922_cr1_clear, #object
-       .type   arm922_cr1_set, #object
-arm922_cr1_clear:
-       .word   0x3f3f
-arm922_cr1_set:
-       .word   0x3135
+       .type   arm922_crval, #object
+arm922_crval:
+       crval   clear=0x00003f3f, mmuset=0x00003135, ucset=0x00001130
 
        __INITDATA
 
index aaa9f985b2461dfa56b323bc0daedc9716ce4441..07f2a888c93c2d4fe96c4ab0101bb8f0287de986 100644 (file)
@@ -455,11 +455,10 @@ __arm925_setup:
        mcr     p15, 7, r0, c15, c0, 0
 #endif
 
+       adr     r5, {r5, r6}
        mrc     p15, 0, r0, c1, c0              @ get control register v4
-       ldr     r5, arm925_cr1_clear
        bic     r0, r0, r5
-       ldr     r5, arm925_cr1_set
-       orr     r0, r0, r5
+       orr     r0, r0, r6
 #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
        orr     r0, r0, #0x4000                 @ .1.. .... .... ....
 #endif
@@ -472,12 +471,9 @@ __arm925_setup:
         * .011 0001 ..11 1101
         * 
         */
-       .type   arm925_cr1_clear, #object
-       .type   arm925_cr1_set, #object
-arm925_cr1_clear:
-       .word   0x7f3f
-arm925_cr1_set:
-       .word   0x313d
+       .type   arm925_crval, #object
+arm925_crval:
+       crval   clear=0x00007f3f, mmuset=0x0000313d, ucset=0x00001130
 
        __INITDATA
 
index ce246dd7b407c6e9458069775aaea5a6245c313f..77e58375778c1217be285c9b47ef51866fcf940f 100644 (file)
@@ -404,11 +404,11 @@ __arm926_setup:
        mcr     p15, 7, r0, c15, c0, 0
 #endif 
 
+       adr     r5, arm926_crval
+       ldmia   r5, {r5, r6}
        mrc     p15, 0, r0, c1, c0              @ get control register v4
-       ldr     r5, arm926_cr1_clear
        bic     r0, r0, r5
-       ldr     r5, arm926_cr1_set
-       orr     r0, r0, r5
+       orr     r0, r0, r6
 #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
        orr     r0, r0, #0x4000                 @ .1.. .... .... ....
 #endif
@@ -421,12 +421,9 @@ __arm926_setup:
         * .011 0001 ..11 0101
         * 
         */
-       .type   arm926_cr1_clear, #object
-       .type   arm926_cr1_set, #object
-arm926_cr1_clear:
-       .word   0x7f3f
-arm926_cr1_set:
-       .word   0x3135
+       .type   arm926_crval, #object
+arm926_crval:
+       crval   clear=0x00007f3f, mmuset=0x00003135, ucset=0x00001134
 
        __INITDATA
 
index 7cfc2604a1ee9b29211babfa3bc8348e16d7d7a0..9e2c89eb2115bd644fc09d854d48ac7637fc3cad 100644 (file)
        .macro  asid, rd, rn
        and     \rd, \rn, #255
        .endm
+
+       .macro  crval, clear, mmuset, ucset
+#ifdef CONFIG_MMU
+       .word   \clear
+       .word   \mmuset
+#else
+       .word   \clear
+       .word   \ucset
+#endif
+       .endm
index 5a760a2c629c11681d072e2d547e791ab1ebb7f1..eeacf601d6e89a7e0c13b6c85651457b49aeac07 100644 (file)
@@ -185,11 +185,12 @@ __sa110_setup:
 #ifdef CONFIG_MMU
        mcr     p15, 0, r10, c8, c7             @ invalidate I,D TLBs on v4
 #endif
+
+       adr     r5, sa110_crval
+       ldmia   r5, {r5, r6}
        mrc     p15, 0, r0, c1, c0              @ get control register v4
-       ldr     r5, sa110_cr1_clear
        bic     r0, r0, r5
-       ldr     r5, sa110_cr1_set
-       orr     r0, r0, r5
+       orr     r0, r0, r6
        mov     pc, lr
        .size   __sa110_setup, . - __sa110_setup
 
@@ -199,12 +200,9 @@ __sa110_setup:
         * ..01 0001 ..11 1101
         * 
         */
-       .type   sa110_cr1_clear, #object
-       .type   sa110_cr1_set, #object
-sa110_cr1_clear:
-       .word   0x3f3f
-sa110_cr1_set:
-       .word   0x113d
+       .type   sa110_crval, #object
+sa110_crval:
+       crval   clear=0x00003f3f, mmuset=0x0000113d, ucset=0x00001130
 
        __INITDATA
 
index 0a2107ad4c32f8750b52cf9424e3c69bb34f685f..b43696c565fcc29888873f5cca47e9296b06a5fb 100644 (file)
@@ -198,11 +198,11 @@ __sa1100_setup:
 #ifdef CONFIG_MMU
        mcr     p15, 0, r0, c8, c7              @ invalidate I,D TLBs on v4
 #endif
+       adr     r5, sa1100_crval
+       ldmia   r5, {r5, r6}
        mrc     p15, 0, r0, c1, c0              @ get control register v4
-       ldr     r5, sa1100_cr1_clear
        bic     r0, r0, r5
-       ldr     r5, sa1100_cr1_set
-       orr     r0, r0, r5
+       orr     r0, r0, r6
        mov     pc, lr
        .size   __sa1100_setup, . - __sa1100_setup
 
@@ -212,12 +212,9 @@ __sa1100_setup:
         * ..11 0001 ..11 1101
         * 
         */
-       .type   sa1100_cr1_clear, #object
-       .type   sa1100_cr1_set, #object
-sa1100_cr1_clear:
-       .word   0x3f3f
-sa1100_cr1_set:
-       .word   0x313d
+       .type   sa1100_crval, #object
+sa1100_crval:
+       crval   clear=0x00003f3f, mmuset=0x0000313d, ucset=0x00001130
 
        __INITDATA
 
index ca13d4d05f6551e13fae4d9148fa7c7664e3da08..f0075f1b1fc1404b26faa30bce74ed68977fd49b 100644 (file)
@@ -212,11 +212,11 @@ __v6_setup:
        orr     r0, r0, #(0xf << 20)
        mcr     p15, 0, r0, c1, c0, 2           @ Enable full access to VFP
 #endif
+       adr     r5, v6_crval
+       ldmia   r5, {r5, r6}
        mrc     p15, 0, r0, c1, c0, 0           @ read control register
-       ldr     r5, v6_cr1_clear                @ get mask for bits to clear
        bic     r0, r0, r5                      @ clear bits them
-       ldr     r5, v6_cr1_set                  @ get mask for bits to set
-       orr     r0, r0, r5                      @ set them
+       orr     r0, r0, r6                      @ set them
        mov     pc, lr                          @ return to head.S:__ret
 
        /*
@@ -225,12 +225,9 @@ __v6_setup:
         * rrrr rrrx xxx0 0101 xxxx xxxx x111 xxxx < forced
         *         0 110       0011 1.00 .111 1101 < we want
         */
-       .type   v6_cr1_clear, #object
-       .type   v6_cr1_set, #object
-v6_cr1_clear:
-       .word   0x01e0fb7f
-v6_cr1_set:
-       .word   0x00c0387d
+       .type   v6_crval, #object
+v6_crval:
+       crval   clear=0x01e0fb7f, mmuset=0x00c0387d, ucset=0x00c0187c
 
        .type   v6_processor_functions, #object
 ENTRY(v6_processor_functions)
index 8d32e21fe151a919630dc866205974888b624e3a..2303790dc3ff29cd9baf4b551e0b30fc54741870 100644 (file)
@@ -426,23 +426,26 @@ __xsc3_setup:
        orr     r0, r0, #(1 << 10)              @ enable L2 for LLR cache
 #endif
        mcr     p15, 0, r0, c1, c0, 1           @ set auxiliary control reg
+
+       adr     r5, xsc3_crval
+       ldmia   r5, {r5, r6}
        mrc     p15, 0, r0, c1, c0, 0           @ get control register
-       bic     r0, r0, #0x0002                 @ .... .... .... ..A.
-       orr     r0, r0, #0x0005                 @ .... .... .... .C.M
+       bic     r0, r0, r5                      @ .... .... .... ..A.
+       orr     r0, r0, r6                      @ .... .... .... .C.M
 #if BTB_ENABLE
-       bic     r0, r0, #0x0200                 @ .... ..R. .... ....
-       orr     r0, r0, #0x3900                 @ ..VI Z..S .... ....
-#else
-       bic     r0, r0, #0x0a00                 @ .... Z.R. .... ....
-       orr     r0, r0, #0x3100                 @ ..VI ...S .... ....
+       orr     r0, r0, #0x00000800             @ ..VI Z..S .... ....
 #endif
 #if L2_CACHE_ENABLE
-       orr     r0, r0, #0x4000000              @ L2 enable
+       orr     r0, r0, #0x04000000             @ L2 enable
 #endif
        mov     pc, lr
 
        .size   __xsc3_setup, . - __xsc3_setup
 
+       .type   xsc3_crval, #object
+xsc3_crval:
+       crval   clear=0x04003b02, mmuset=0x00003105, ucset=0x00001100
+
        __INITDATA
 
 /*
index 29bcc4dd65178a99cd640e4fc4fd715b97453e00..1ad0c880c80c2d1cd268087e338553be132cf952 100644 (file)
@@ -475,11 +475,12 @@ __xscale_setup:
        orr     r0, r0, #1 << 6                 @ cp6 for IOP3xx and Bulverde
        orr     r0, r0, #1 << 13                @ Its undefined whether this
        mcr     p15, 0, r0, c15, c1, 0          @ affects USR or SVC modes
+
+       adr     r5, xscale_crval
+       ldmia   r5, {r5, r6}
        mrc     p15, 0, r0, c1, c0, 0           @ get control register
-       ldr     r5, xscale_cr1_clear
        bic     r0, r0, r5
-       ldr     r5, xscale_cr1_set
-       orr     r0, r0, r5
+       orr     r0, r0, r6
        mov     pc, lr
        .size   __xscale_setup, . - __xscale_setup
 
@@ -489,12 +490,9 @@ __xscale_setup:
         * ..11 1.01 .... .101
         * 
         */
-       .type   xscale_cr1_clear, #object
-       .type   xscale_cr1_set, #object
-xscale_cr1_clear:
-       .word   0x3b07
-xscale_cr1_set:
-       .word   0x3905
+       .type   xscale_crval, #object
+xscale_crval:
+       crval   clear=0x00003b07, mmuset=0x00003905, ucset=0x00001900
 
        __INITDATA