]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[ARM] 4755/1: [AT91] NAND update
authorAndrew Victor <linux@maxim.org.za>
Wed, 23 Jan 2008 08:21:02 +0000 (09:21 +0100)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Sat, 26 Jan 2008 15:00:32 +0000 (15:00 +0000)
Map the complete memory region (SZ_256M) as is done on the other AT91
processors.

The SMC_SMARTMEDIA bit should be set in the EBI controller to enable
the hardware NAND logic.
  (Patch from Sascha Erlacher)

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
arch/arm/mach-at91/at91rm9200_devices.c
arch/arm/mach-at91/at91sam9260_devices.c
arch/arm/mach-at91/at91sam9261_devices.c
arch/arm/mach-at91/at91sam9263_devices.c

index cebea41687781e221affda19580d021fc46be4f1..a2647265c21442dcc35ba1a7ec453578a5162a0e 100644 (file)
@@ -376,7 +376,7 @@ static struct at91_nand_data nand_data;
 static struct resource nand_resources[] = {
        {
                .start  = NAND_BASE,
-               .end    = NAND_BASE + SZ_8M - 1,
+               .end    = NAND_BASE + SZ_256M - 1,
                .flags  = IORESOURCE_MEM,
        }
 };
index 2e3db137bc490e2f30073376309961b0f91c672c..8acd62b75cb010e7c9920bb2dfb16e8cdaa0e295 100644 (file)
@@ -290,7 +290,7 @@ static struct at91_nand_data nand_data;
 static struct resource nand_resources[] = {
        {
                .start  = NAND_BASE,
-               .end    = NAND_BASE + SZ_8M - 1,
+               .end    = NAND_BASE + SZ_256M - 1,
                .flags  = IORESOURCE_MEM,
        }
 };
@@ -313,7 +313,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
                return;
 
        csa = at91_sys_read(AT91_MATRIX_EBICSA);
-       at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
+       at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 
        /* set the bus interface characteristics */
        at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
index 266ccf01be53e0abce70cdc0bfea3e4700eea456..ba84ba6f18fbc2d5452532ee8f64a6e538afd20e 100644 (file)
@@ -233,7 +233,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
                return;
 
        csa = at91_sys_read(AT91_MATRIX_EBICSA);
-       at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
+       at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 
        /* set the bus interface characteristics */
        at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
index f83ef62f2385ddf61525e9337a8ad0d78da399d0..c025f5c5ffaa976f14d7d43353f9dcd4cbb1ea3b 100644 (file)
@@ -383,7 +383,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
                return;
 
        csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
-       at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC);
+       at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
 
        /* set the bus interface characteristics */
        at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)