x86: merge some trivially mergeable headers

Merge errno.h, resource.h, rtc.h, sections.h, serial.h and sockios.h,
where i386 and x86_64 have no or only trivial comment/include guard
differences.

Build tested on both 32-bit and 64-bit, and booted on 64-bit.

[tglx: fixup Kbuild as well]

Signed-off-by: Roland Dreier <roland@digitalvampire.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

diff --git a/include/asm-x86/Kbuild b/include/asm-x86/Kbuild
index 0618ca386ab15b2475a65f57feda7c3ac142ed91..158deea39a5423ab3a958d5ac8d31688c5657075 100644 (file)
--- a/include/asm-x86/Kbuild
+++ b/include/asm-x86/Kbuild
@@ -59,8 +59,6 @@ unifdef-y += siginfo_32.h
 unifdef-y += siginfo_64.h
 unifdef-y += signal_32.h
 unifdef-y += signal_64.h
-unifdef-y += sockios_32.h
-unifdef-y += sockios_64.h
 unifdef-y += stat_32.h
 unifdef-y += stat_64.h
 unifdef-y += statfs_32.h

diff --git a/include/asm-x86/serial.h b/include/asm-x86/serial.h
index cf1b05227b29ea26f614440050d4712d210032da..628c801535ea912c00a57654310a832acca2e67f 100644 (file)
--- a/include/asm-x86/serial.h
+++ b/include/asm-x86/serial.h
@@ -1,5 +1,29 @@
-#ifdef CONFIG_X86_32
-# include "serial_32.h"
+#ifndef _ASM_X86_SERIAL_H
+#define _ASM_X86_SERIAL_H
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
+#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
 #else
-# include "serial_64.h"
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
 #endif
+
+#define SERIAL_PORT_DFNS                       \
+       /* UART CLK   PORT IRQ     FLAGS        */                      \
+       { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },      /* ttyS0 */     \
+       { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },      /* ttyS1 */     \
+       { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },      /* ttyS2 */     \
+       { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },     /* ttyS3 */
+
+#endif /* _ASM_X86_SERIAL_H */

diff --git a/include/asm-x86/serial_32.h b/include/asm-x86/serial_32.h
deleted file mode 100644 (file)
index bd67480..0000000
--- a/include/asm-x86/serial_32.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * include/asm-i386/serial.h
- */
-
-
-/*
- * This assumes you have a 1.8432 MHz clock for your UART.
- *
- * It'd be nice if someone built a serial card with a 24.576 MHz
- * clock, since the 16550A is capable of handling a top speed of 1.5
- * megabits/second; but this requires the faster clock.
- */
-#define BASE_BAUD ( 1843200 / 16 )
-
-/* Standard COM flags (except for COM4, because of the 8514 problem) */
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
-#endif
-
-#define SERIAL_PORT_DFNS                       \
-       /* UART CLK   PORT IRQ     FLAGS        */                      \
-       { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },      /* ttyS0 */     \
-       { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },      /* ttyS1 */     \
-       { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },      /* ttyS2 */     \
-       { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },     /* ttyS3 */

diff --git a/include/asm-x86/serial_64.h b/include/asm-x86/serial_64.h
deleted file mode 100644 (file)
index b0496e0..0000000
--- a/include/asm-x86/serial_64.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * include/asm-x86_64/serial.h
- */
-
-
-/*
- * This assumes you have a 1.8432 MHz clock for your UART.
- *
- * It'd be nice if someone built a serial card with a 24.576 MHz
- * clock, since the 16550A is capable of handling a top speed of 1.5
- * megabits/second; but this requires the faster clock.
- */
-#define BASE_BAUD ( 1843200 / 16 )
-
-/* Standard COM flags (except for COM4, because of the 8514 problem) */
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
-#endif
-
-#define SERIAL_PORT_DFNS                       \
-       /* UART CLK   PORT IRQ     FLAGS        */                      \
-       { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },      /* ttyS0 */     \
-       { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },      /* ttyS1 */     \
-       { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },      /* ttyS2 */     \
-       { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },     /* ttyS3 */

diff --git a/include/asm-x86/sockios.h b/include/asm-x86/sockios.h
index 5a134fc70b9c4823548da4029372273cf2a12700..49cc72b5d3c914fa5bb98f181e37768018cc6782 100644 (file)
--- a/include/asm-x86/sockios.h
+++ b/include/asm-x86/sockios.h
@@ -1,13 +1,13 @@
-#ifdef __KERNEL__
-# ifdef CONFIG_X86_32
-#  include "sockios_32.h"
-# else
-#  include "sockios_64.h"
-# endif
-#else
-# ifdef __i386__
-#  include "sockios_32.h"
-# else
-#  include "sockios_64.h"
-# endif
-#endif
+#ifndef _ASM_X86_SOCKIOS_H
+#define _ASM_X86_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN      0x8901
+#define SIOCSPGRP      0x8902
+#define FIOGETOWN      0x8903
+#define SIOCGPGRP      0x8904
+#define SIOCATMARK     0x8905
+#define SIOCGSTAMP     0x8906          /* Get stamp (timeval) */
+#define SIOCGSTAMPNS   0x8907          /* Get stamp (timespec) */
+
+#endif /* _ASM_X86_SOCKIOS_H */

diff --git a/include/asm-x86/sockios_32.h b/include/asm-x86/sockios_32.h
deleted file mode 100644 (file)
index ff528c7..0000000
--- a/include/asm-x86/sockios_32.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ARCH_I386_SOCKIOS__
-#define __ARCH_I386_SOCKIOS__
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN      0x8901
-#define SIOCSPGRP      0x8902
-#define FIOGETOWN      0x8903
-#define SIOCGPGRP      0x8904
-#define SIOCATMARK     0x8905
-#define SIOCGSTAMP     0x8906          /* Get stamp (timeval) */
-#define SIOCGSTAMPNS   0x8907          /* Get stamp (timespec) */
-
-#endif

diff --git a/include/asm-x86/sockios_64.h b/include/asm-x86/sockios_64.h
deleted file mode 100644 (file)
index d726ba2..0000000
--- a/include/asm-x86/sockios_64.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ARCH_X8664_SOCKIOS__
-#define __ARCH_X8664_SOCKIOS__
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN      0x8901
-#define SIOCSPGRP      0x8902
-#define FIOGETOWN      0x8903
-#define SIOCGPGRP      0x8904
-#define SIOCATMARK     0x8905
-#define SIOCGSTAMP     0x8906          /* Get stamp (timeval) */
-#define SIOCGSTAMPNS   0x8907          /* Get stamp (timespec) */
-
-#endif