]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
projects / linux-2.6-omap-h63xx.git / commitdiff
? search:
summary | shortlog | log | commit | commitdiff | tree
raw | patch | inline | side by side (parent: a504a83)
Clean-up rx51 a bit and set the regulators.
authorDavid Brownell <dbrownell@users.sourceforge.net>
Fri, 13 Mar 2009 18:03:35 +0000 (18:03 +0000)
committerTony Lindgren <tony@atomide.com>
Tue, 17 Mar 2009 16:14:15 +0000 (09:14 -0700)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Lauri Leukkunen <lauri.leukkunen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/mach-omap2/board-rx51-peripherals.c patch | blob | history

diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 9da01878b2832c6db311ce1966e40af26d27b443..49c3d80eff58237155dca31d8862b895807a2ccd 100644 (file)
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -1,7 +1,7 @@
 /*
  * linux/arch/arm/mach-omap2/board-rx51-flash.c
  *
- * Copyright (C) 2008 Nokia
+ * Copyright (C) 2008-2009 Nokia
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -18,18 +18,16 @@
 #include <linux/i2c/twl4030.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/regulator/machine.h>
 
 #include <mach/mcspi.h>
 #include <mach/gpio.h>
 #include <mach/mux.h>
 #include <mach/board.h>
 #include <mach/common.h>
-#include <mach/keypad.h>
 #include <mach/dma.h>
 #include <mach/gpmc.h>
 
-#define RX51_DEBUG_BASE                        0x08000000  /* debug board */
-#define RX51_ETHR_START                        RX51_DEBUG_BASE
 #define RX51_ETHR_GPIO_IRQ             54
 
 #define RX51_TSC2005_RESET_GPIO                104
@@ -39,13 +37,9 @@
 
 static struct resource rx51_smc91x_resources[] = {
        [0] = {
-               .start  = RX51_ETHR_START,
-               .end    = RX51_ETHR_START + SZ_4K,
                .flags          = IORESOURCE_MEM,
        },
        [1] = {
-               .start          = OMAP_GPIO_IRQ(RX51_ETHR_GPIO_IRQ),
-               .end    = 0,
                .flags          = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
        },
 };
@@ -58,7 +52,7 @@ static struct platform_device rx51_smc91x_device = {
 };
 
 static struct tsc2005_platform_data tsc2005_config = {
-       .reset_gpio             = RX51_TSC2005_RESET_GPIO, /* not used */
+       .reset_gpio             = RX51_TSC2005_RESET_GPIO, /* not used */
 
        .ts_x_plate_ohm         = 280,
        .ts_hw_avg              = 0,
@@ -83,8 +77,8 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] = {
                .modalias               = "tsc2005",
                .bus_num                = 1,
                .chip_select            = 0,
-               .irq                    = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),
-               .max_speed_hz           = 6000000,
+               .irq                    = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),
+               .max_speed_hz           = 6000000,
                .controller_data        = &tsc2005_mcspi_config,
                .platform_data          = &tsc2005_config,
        },
@@ -140,8 +134,8 @@ static int rx51_keymap[] = {
 static struct twl4030_keypad_data rx51_kp_data = {
        .rows           = 8,
        .cols           = 8,
-       .keymap         = rx51_keymap,
-       .keymapsize     = ARRAY_SIZE(rx51_keymap),
+       .keymap         = rx51_keymap,
+       .keymapsize     = ARRAY_SIZE(rx51_keymap),
        .rep            = 1,
 };
 
@@ -179,6 +173,7 @@ static void __init rx51_init_smc91x(void)
                return;
        }
        gpio_direction_input(RX51_ETHR_GPIO_IRQ);
+       rx51_smc91x_resources[1].start = gpio_to_irq(RX51_ETHR_GPIO_IRQ);
 }
 
 static void __init rx51_init_tsc2005(void)
@@ -193,18 +188,135 @@ static void __init rx51_init_tsc2005(void)
        }
 }
 
-static struct twl4030_usb_data rx51_usb_data = {
-       .usb_mode               = T2_USB_MODE_ULPI,
-};
-
 static struct twl4030_madc_platform_data rx51_madc_data = {
        .irq_line               = 1,
 };
 
+static struct regulator_init_data rx51_vaux1 = {
+       .constraints = {
+               .name                   = "V28",
+               .min_uV                 = 2800000,
+               .max_uV                 = 2800000,
+               .valid_modes_mask       = REGULATOR_MODE_NORMAL
+                                       | REGULATOR_MODE_STANDBY,
+               .valid_ops_mask         = REGULATOR_CHANGE_MODE
+                                       | REGULATOR_CHANGE_STATUS,
+       },
+};
+
+static struct regulator_init_data rx51_vaux2 = {
+       .constraints = {
+               .name                   = "VCSI",
+               .min_uV                 = 1800000,
+               .max_uV                 = 1800000,
+               .valid_modes_mask       = REGULATOR_MODE_NORMAL
+                                       | REGULATOR_MODE_STANDBY,
+               .valid_ops_mask         = REGULATOR_CHANGE_MODE
+                                       | REGULATOR_CHANGE_STATUS,
+       },
+};
+
+/* VAUX3 - adds more power to VIO_18 rail */
+static struct regulator_init_data rx51_vaux3 = {
+       .constraints = {
+               .name                   = "VCAM_DIG_18",
+               .min_uV                 = 1800000,
+               .max_uV                 = 1800000,
+               .apply_uV               = true,
+               .valid_modes_mask       = REGULATOR_MODE_NORMAL
+                                       | REGULATOR_MODE_STANDBY,
+               .valid_ops_mask         = REGULATOR_CHANGE_MODE
+                                       | REGULATOR_CHANGE_STATUS,
+       },
+};
+
+static struct regulator_init_data rx51_vaux4 = {
+       .constraints = {
+               .name                   = "VCAM_ANA_28",
+               .min_uV                 = 2800000,
+               .max_uV                 = 2800000,
+               .apply_uV               = true,
+               .valid_modes_mask       = REGULATOR_MODE_NORMAL
+                                       | REGULATOR_MODE_STANDBY,
+               .valid_ops_mask         = REGULATOR_CHANGE_MODE
+                                       | REGULATOR_CHANGE_STATUS,
+       },
+};
+
+static struct regulator_init_data rx51_vmmc1 = {
+       .constraints = {
+               .min_uV                 = 1850000,
+               .max_uV                 = 3150000,
+               .valid_modes_mask       = REGULATOR_MODE_NORMAL
+                                       | REGULATOR_MODE_STANDBY,
+               .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
+                                       | REGULATOR_CHANGE_MODE
+                                       | REGULATOR_CHANGE_STATUS,
+       },
+};
+
+static struct regulator_init_data rx51_vmmc2 = {
+       .constraints = {
+               .name                   = "VMMC2_30",
+               .min_uV                 = 1850000,
+               .max_uV                 = 3150000,
+               .apply_uV               = true,
+               .valid_modes_mask       = REGULATOR_MODE_NORMAL
+                                       | REGULATOR_MODE_STANDBY,
+               .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
+                                       | REGULATOR_CHANGE_MODE
+                                       | REGULATOR_CHANGE_STATUS,
+       },
+};
+
+static struct regulator_init_data rx51_vsim = {
+       .constraints = {
+               .name                   = "VMMC2_IO_18",
+               .min_uV                 = 1800000,
+               .max_uV                 = 1800000,
+               .apply_uV               = true,
+               .valid_modes_mask       = REGULATOR_MODE_NORMAL
+                                       | REGULATOR_MODE_STANDBY,
+               .valid_ops_mask         = REGULATOR_CHANGE_MODE
+                                       | REGULATOR_CHANGE_STATUS,
+       },
+};
+
+static struct regulator_init_data rx51_vdac = {
+       .constraints = {
+               .min_uV                 = 1800000,
+               .max_uV                 = 1800000,
+               .valid_modes_mask       = REGULATOR_MODE_NORMAL
+                                       | REGULATOR_MODE_STANDBY,
+               .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
+                                       | REGULATOR_CHANGE_MODE
+                                       | REGULATOR_CHANGE_STATUS,
+       },
+};
+
+static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
+{
+       /* FIXME this gpio setup is just a placeholder for now */
+       gpio_request(gpio + 6, "backlight_pwm");
+       gpio_direction_output(gpio + 6, 0);
+       gpio_request(gpio + 7, "speaker_en");
+       gpio_direction_output(gpio + 7, 1);
+
+       /* FIXME connect power supplies to devices; register MMC */
+
+       return 0;
+}
+
 static struct twl4030_gpio_platform_data rx51_gpio_data = {
        .gpio_base              = OMAP_MAX_GPIO_LINES,
        .irq_base               = TWL4030_GPIO_IRQ_BASE,
        .irq_end                = TWL4030_GPIO_IRQ_END,
+       .pulldowns              = BIT(0) | BIT(1) | BIT(2) | BIT(3)
+                               | BIT(4) | BIT(5)
+                               | BIT(8) | BIT(9) | BIT(10) | BIT(11)
+                               | BIT(12) | BIT(13) | BIT(14) | BIT(15)
+                               | BIT(16) | BIT(17) ,
+       .setup                  = rx51_twlgpio_setup,
 };
 
 static struct twl4030_platform_data rx51_twldata = {
@@ -215,12 +327,20 @@ static struct twl4030_platform_data rx51_twldata = {
        .gpio                   = &rx51_gpio_data,
        .keypad                 = &rx51_kp_data,
        .madc                   = &rx51_madc_data,
-       .usb                    = &rx51_usb_data,
+
+       .vaux1                  = &rx51_vaux1,
+       .vaux2                  = &rx51_vaux2,
+       .vaux3                  = &rx51_vaux3,
+       .vaux4                  = &rx51_vaux4,
+       .vmmc1                  = &rx51_vmmc1,
+       .vmmc2                  = &rx51_vmmc2,
+       .vsim                   = &rx51_vsim,
+       .vdac                   = &rx51_vdac,
 };
 
 static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
        {
-               I2C_BOARD_INFO("twl4030", 0x48),
+               I2C_BOARD_INFO("twl5030", 0x48),
                .flags = I2C_CLIENT_WAKE,
                .irq = INT_34XX_SYS_NIRQ,
                .platform_data = &rx51_twldata,
Unnamed repository; edit this file 'description' to name the repository.